mirror of https://github.com/acidanthera/audk.git
384 lines
17 KiB
C
384 lines
17 KiB
C
/** @file
|
|
SCSI Pass Through protocol as defined in EFI 1.1.
|
|
This protocol allows information about a SCSI channel to be collected,
|
|
and allows SCSI Request Packets to be sent to any SCSI devices on a SCSI
|
|
channel even if those devices are not boot devices. This protocol is attached
|
|
to the device handle of each SCSI channel in a system that the protocol
|
|
supports, and can be used for diagnostics. It may also be used to build
|
|
a Block I/O driver for SCSI hard drives and SCSI CD-ROM or DVD drives to
|
|
allow those devices to become boot devices.
|
|
|
|
Copyright (c) 2006 - 2008, Intel Corporation
|
|
All rights reserved. This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
|
|
#ifndef __SCSI_PASS_THROUGH_H__
|
|
#define __SCSI_PASS_THROUGH_H__
|
|
|
|
#define EFI_SCSI_PASS_THRU_PROTOCOL_GUID \
|
|
{ \
|
|
0xa59e8fcf, 0xbda0, 0x43bb, {0x90, 0xb1, 0xd3, 0x73, 0x2e, 0xca, 0xa8, 0x77 } \
|
|
}
|
|
|
|
///
|
|
/// Forward reference for pure ANSI compatability
|
|
///
|
|
typedef struct _EFI_SCSI_PASS_THRU_PROTOCOL EFI_SCSI_PASS_THRU_PROTOCOL;
|
|
|
|
#define EFI_SCSI_PASS_THRU_ATTRIBUTES_PHYSICAL 0x0001
|
|
#define EFI_SCSI_PASS_THRU_ATTRIBUTES_LOGICAL 0x0002
|
|
#define EFI_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO 0x0004
|
|
|
|
//
|
|
// SCSI Host Adapter Status definition
|
|
//
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_OK 0x00
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_TIMEOUT_COMMAND 0x09 // timeout when processing the command
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_TIMEOUT 0x0b // timeout when waiting for the command processing
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_MESSAGE_REJECT 0x0d // a message reject was received when processing command
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_BUS_RESET 0x0e // a bus reset was detected
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_PARITY_ERROR 0x0f
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_REQUEST_SENSE_FAILED 0x10 // the adapter failed in issuing request sense command
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_SELECTION_TIMEOUT 0x11 // selection timeout
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_DATA_OVERRUN_UNDERRUN 0x12 // data overrun or data underrun
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_BUS_FREE 0x13 // Unexepected bus free
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_PHASE_ERROR 0x14 // Target bus phase sequence failure
|
|
#define EFI_SCSI_STATUS_HOST_ADAPTER_OTHER 0x7f
|
|
|
|
//
|
|
// SCSI Target Status definition
|
|
//
|
|
#define EFI_SCSI_STATUS_TARGET_GOOD 0x00
|
|
#define EFI_SCSI_STATUS_TARGET_CHECK_CONDITION 0x02 // check condition
|
|
#define EFI_SCSI_STATUS_TARGET_CONDITION_MET 0x04 // condition met
|
|
#define EFI_SCSI_STATUS_TARGET_BUSY 0x08 // busy
|
|
#define EFI_SCSI_STATUS_TARGET_INTERMEDIATE 0x10 // intermediate
|
|
#define EFI_SCSI_STATUS_TARGET_INTERMEDIATE_CONDITION_MET 0x14 // intermediate-condition met
|
|
#define EFI_SCSI_STATUS_TARGET_RESERVATION_CONFLICT 0x18 // reservation conflict
|
|
#define EFI_SCSI_STATUS_TARGET_COMMOND_TERMINATED 0x22 // command terminated
|
|
#define EFI_SCSI_STATUS_TARGET_QUEUE_FULL 0x28 // queue full
|
|
|
|
typedef struct {
|
|
///
|
|
/// The timeout, in 100 ns units, to use for the execution of this SCSI
|
|
/// Request Packet. A Timeout value of 0 means that this function
|
|
/// will wait indefinitely for the SCSI Request Packet to execute. If
|
|
/// Timeout is greater than zero, then this function will return
|
|
/// EFI_TIMEOUT if the time required to execute the SCSI Request
|
|
/// Packet is greater than Timeout.
|
|
///
|
|
UINT64 Timeout;
|
|
///
|
|
/// A pointer to the data buffer to transfer between the SCSI
|
|
/// controller and the SCSI device. Must be aligned to the boundary
|
|
/// specified in the IoAlign field of the
|
|
/// EFI_SCSI_PASS_THRU_MODE structure.
|
|
///
|
|
VOID *DataBuffer;
|
|
///
|
|
/// A pointer to the sense data that was generated by the execution of
|
|
/// the SCSI Request Packet.
|
|
///
|
|
VOID *SenseData;
|
|
///
|
|
/// A pointer to buffer that contains the Command Data Block to
|
|
/// send to the SCSI device.
|
|
///
|
|
VOID *Cdb;
|
|
///
|
|
/// On Input, the size, in bytes, of InDataBuffer. On output, the
|
|
/// number of bytes transferred between the SCSI controller and the SCSI device.
|
|
///
|
|
UINT32 TransferLength;
|
|
///
|
|
/// The length, in bytes, of the buffer Cdb. The standard values are
|
|
/// 6, 10, 12, and 16, but other values are possible if a variable length CDB is used.
|
|
///
|
|
UINT8 CdbLength;
|
|
///
|
|
/// The direction of the data transfer. 0 for reads, 1 for writes. A
|
|
/// value of 2 is Reserved for Bi-Directional SCSI commands.
|
|
///
|
|
UINT8 DataDirection;
|
|
///
|
|
/// The status of the SCSI Host Controller that produces the SCSI
|
|
/// bus where the SCSI device attached when the SCSI Request
|
|
/// Packet was executed on the SCSI Controller.
|
|
///
|
|
UINT8 HostAdapterStatus;
|
|
///
|
|
/// The status returned by the SCSI device when the SCSI Request
|
|
/// Packet was executed.
|
|
///
|
|
UINT8 TargetStatus;
|
|
///
|
|
/// On input, the length in bytes of the SenseData buffer. On
|
|
/// output, the number of bytes written to the SenseData buffer.
|
|
///
|
|
UINT8 SenseDataLength;
|
|
} EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET;
|
|
|
|
typedef struct {
|
|
///
|
|
/// A Null-terminated Unicode string that represents the printable name of the SCSI controller.
|
|
///
|
|
CHAR16 *ControllerName;
|
|
///
|
|
/// A Null-terminated Unicode string that represents the printable name of the SCSI channel.
|
|
///
|
|
CHAR16 *ChannelName;
|
|
///
|
|
/// The Target ID of the host adapter on the SCSI channel.
|
|
///
|
|
UINT32 AdapterId;
|
|
///
|
|
/// Additional information on the attributes of the SCSI channel.
|
|
///
|
|
UINT32 Attributes;
|
|
///
|
|
/// Supplies the alignment requirement for any buffer used in a data transfer.
|
|
///
|
|
UINT32 IoAlign;
|
|
} EFI_SCSI_PASS_THRU_MODE;
|
|
|
|
/**
|
|
Sends a SCSI Request Packet to a SCSI device that is attached to
|
|
the SCSI channel. This function supports both blocking I/O and
|
|
non-blocking I/O. The blocking I/O functionality is required,
|
|
and the non-blocking I/O functionality is optional.
|
|
|
|
@param This Protocol instance pointer.
|
|
@param Target The Target ID of the SCSI device to
|
|
send the SCSI Request Packet.
|
|
@param Lun The LUN of the SCSI device to send the
|
|
SCSI Request Packet.
|
|
@param Packet A pointer to the SCSI Request Packet to send
|
|
to the SCSI device specified by Target and Lun.
|
|
@param Event If non-blocking I/O is not supported then Event
|
|
is ignored, and blocking I/O is performed.
|
|
If Event is NULL, then blocking I/O is performed.
|
|
If Event is not NULL and non blocking I/O is
|
|
supported, then non-blocking I/O is performed,
|
|
and Event will be signaled when the SCSI Request
|
|
Packet completes
|
|
|
|
@retval EFI_SUCCESS The SCSI Request Packet was sent by the host, and
|
|
TransferLength bytes were transferred to/from
|
|
DataBuffer. See HostAdapterStatus, TargetStatus,
|
|
SenseDataLength, and SenseData in that order
|
|
for additional status information.
|
|
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed, but the
|
|
entire DataBuffer could not be transferred.
|
|
The actual number of bytes transferred is returned
|
|
in TransferLength. See HostAdapterStatus,
|
|
TargetStatus, SenseDataLength, and SenseData in
|
|
that order for additional status information.
|
|
@retval EFI_NOT_READY The SCSI Request Packet could not be sent because
|
|
there are too many SCSI Request Packets already
|
|
queued. The caller may retry again later.
|
|
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send
|
|
the SCSI Request Packet. See HostAdapterStatus,
|
|
TargetStatus, SenseDataLength, and SenseData in
|
|
that order for additional status information.
|
|
@retval EFI_INVALID_PARAMETER Target, Lun, or the contents of ScsiRequestPacket
|
|
are invalid. The SCSI Request Packet was not sent,
|
|
so no additional status information is available.
|
|
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet
|
|
is not supported by the host adapter. The SCSI
|
|
Request Packet was not sent, so no additional
|
|
status information is available.
|
|
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
|
|
Request Packet to execute. See HostAdapterStatus,
|
|
TargetStatus, SenseDataLength, and SenseData in
|
|
that order for additional status information.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_SCSI_PASS_THRU_PASSTHRU)(
|
|
IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
|
|
IN UINT32 Target,
|
|
IN UINT64 Lun,
|
|
IN OUT EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *Packet,
|
|
IN EFI_EVENT Event OPTIONAL
|
|
);
|
|
|
|
/**
|
|
Used to retrieve the list of legal Target IDs for SCSI devices
|
|
on a SCSI channel.
|
|
|
|
@param This Protocol instance pointer.
|
|
@param Target On input, a pointer to the Target ID of a
|
|
SCSI device present on the SCSI channel.
|
|
On output, a pointer to the Target ID of
|
|
the next SCSI device present on a SCSI channel.
|
|
An input value of 0xFFFFFFFF retrieves the
|
|
Target ID of the first SCSI device present on
|
|
a SCSI channel.
|
|
@param Lun On input, a pointer to the LUN of a SCSI device
|
|
present on the SCSI channel. On output, a pointer
|
|
to the LUN of the next SCSI device present on a
|
|
SCSI channel.
|
|
|
|
@retval EFI_SUCCESS The Target ID of the next SCSI device on the SCSI
|
|
channel was returned in Target and Lun.
|
|
@retval EFI_NOT_FOUND There are no more SCSI devices on this SCSI channel.
|
|
@retval EFI_INVALID_PARAMETER Target is not 0xFFFFFFFF, and Target and Lun were
|
|
not returned on a previous call to GetNextDevice().
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_SCSI_PASS_THRU_GET_NEXT_DEVICE)(
|
|
IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
|
|
IN OUT UINT32 *Target,
|
|
IN OUT UINT64 *Lun
|
|
);
|
|
|
|
/**
|
|
Used to allocate and build a device path node for a SCSI device
|
|
on a SCSI channel.
|
|
|
|
@param This Protocol instance pointer.
|
|
@param Target The Target ID of the SCSI device for which
|
|
a device path node is to be allocated and built.
|
|
@param Lun The LUN of the SCSI device for which a device
|
|
path node is to be allocated and built.
|
|
@param DevicePath A pointer to a single device path node that
|
|
describes the SCSI device specified by
|
|
Target and Lun. This function is responsible
|
|
for allocating the buffer DevicePath with the boot
|
|
service AllocatePool(). It is the caller's
|
|
responsibility to free DevicePath when the caller
|
|
is finished with DevicePath.
|
|
|
|
@retval EFI_SUCCESS The device path node that describes the SCSI device
|
|
specified by Target and Lun was allocated and
|
|
returned in DevicePath.
|
|
@retval EFI_NOT_FOUND The SCSI devices specified by Target and Lun does
|
|
not exist on the SCSI channel.
|
|
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
|
|
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate
|
|
DevicePath.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_SCSI_PASS_THRU_BUILD_DEVICE_PATH)(
|
|
IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
|
|
IN UINT32 Target,
|
|
IN UINT64 Lun,
|
|
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
|
|
);
|
|
|
|
/**
|
|
Used to translate a device path node to a Target ID and LUN.
|
|
|
|
@param This Protocol instance pointer.
|
|
@param DevicePath A pointer to the device path node that
|
|
describes a SCSI device on the SCSI channel.
|
|
@param Target A pointer to the Target ID of a SCSI device
|
|
on the SCSI channel.
|
|
@param Lun A pointer to the LUN of a SCSI device on
|
|
the SCSI channel.
|
|
|
|
@retval EFI_SUCCESS DevicePath was successfully translated to a
|
|
Target ID and LUN, and they were returned
|
|
in Target and Lun.
|
|
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
|
|
@retval EFI_INVALID_PARAMETER Target is NULL.
|
|
@retval EFI_INVALID_PARAMETER Lun is NULL.
|
|
@retval EFI_UNSUPPORTED This driver does not support the device path
|
|
node type in DevicePath.
|
|
@retval EFI_NOT_FOUND A valid translation from DevicePath to a
|
|
Target ID and LUN does not exist.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_SCSI_PASS_THRU_GET_TARGET_LUN)(
|
|
IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
|
|
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
|
|
OUT UINT32 *Target,
|
|
OUT UINT64 *Lun
|
|
);
|
|
|
|
/**
|
|
Resets a SCSI channel.This operation resets all the
|
|
SCSI devices connected to the SCSI channel.
|
|
|
|
@param This Protocol instance pointer.
|
|
|
|
@retval EFI_SUCCESS The SCSI channel was reset.
|
|
@retval EFI_UNSUPPORTED The SCSI channel does not support
|
|
a channel reset operation.
|
|
@retval EFI_DEVICE_ERROR A device error occurred while
|
|
attempting to reset the SCSI channel.
|
|
@retval EFI_TIMEOUT A timeout occurred while attempting
|
|
to reset the SCSI channel.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_SCSI_PASS_THRU_RESET_CHANNEL)(
|
|
IN EFI_SCSI_PASS_THRU_PROTOCOL *This
|
|
);
|
|
|
|
/**
|
|
Resets a SCSI device that is connected to a SCSI channel.
|
|
|
|
@param This Protocol instance pointer.
|
|
@param Target The Target ID of the SCSI device to reset.
|
|
@param Lun The LUN of the SCSI device to reset.
|
|
|
|
@retval EFI_SUCCESS The SCSI device specified by Target and
|
|
Lun was reset.
|
|
@retval EFI_UNSUPPORTED The SCSI channel does not support a target
|
|
reset operation.
|
|
@retval EFI_INVALID_PARAMETER Target or Lun are invalid.
|
|
@retval EFI_DEVICE_ERROR A device error occurred while attempting
|
|
to reset the SCSI device specified by Target
|
|
and Lun.
|
|
@retval EFI_TIMEOUT A timeout occurred while attempting to reset
|
|
the SCSI device specified by Target and Lun.
|
|
|
|
**/
|
|
typedef
|
|
EFI_STATUS
|
|
(EFIAPI *EFI_SCSI_PASS_THRU_RESET_TARGET)(
|
|
IN EFI_SCSI_PASS_THRU_PROTOCOL *This,
|
|
IN UINT32 Target,
|
|
IN UINT64 Lun
|
|
);
|
|
|
|
///
|
|
/// The EFI_SCSI_PASS_THRU_PROTOCOL provides information about a SCSI channel and
|
|
/// the ability to send SCSI Request Packets to any SCSI device attached to that SCSI channel. The
|
|
/// information includes the Target ID of the host controller on the SCSI channel, the attributes of
|
|
/// the SCSI channel, the printable name for the SCSI controller, and the printable name of the
|
|
/// SCSI channel.
|
|
///
|
|
struct _EFI_SCSI_PASS_THRU_PROTOCOL {
|
|
///
|
|
/// A pointer to the EFI_SCSI_PASS_THRU_MODE data for this SCSI channel.
|
|
///
|
|
EFI_SCSI_PASS_THRU_MODE *Mode;
|
|
EFI_SCSI_PASS_THRU_PASSTHRU PassThru;
|
|
EFI_SCSI_PASS_THRU_GET_NEXT_DEVICE GetNextDevice;
|
|
EFI_SCSI_PASS_THRU_BUILD_DEVICE_PATH BuildDevicePath;
|
|
EFI_SCSI_PASS_THRU_GET_TARGET_LUN GetTargetLun;
|
|
EFI_SCSI_PASS_THRU_RESET_CHANNEL ResetChannel;
|
|
EFI_SCSI_PASS_THRU_RESET_TARGET ResetTarget;
|
|
};
|
|
|
|
extern EFI_GUID gEfiScsiPassThruProtocolGuid;
|
|
|
|
#endif
|