audk/EdkModulePkg/Universal/Runtime/RuntimeDxe/PeHotRelocate.c

217 lines
6.3 KiB
C

/*++
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
PeHotRelocate.c
Abstract:
--*/
#include "Runtime.h"
STATIC
VOID *
RuntimePeImageAddress (
IN RUNTIME_IMAGE_RELOCATION_DATA *Image,
IN UINTN Address
)
/*++
Routine Description:
Converts an image address to the loaded address
Arguments:
Image - The relocation data of the image being loaded
Address - The address to be converted to the loaded address
Returns:
NULL if the address can not be converted, otherwise, the converted address
--*/
{
if (Address >= (Image->ImageSize) << EFI_PAGE_SHIFT) {
return NULL;
}
return (CHAR8 *) ((UINTN) Image->ImageBase + Address);
}
VOID
RelocatePeImageForRuntime (
RUNTIME_IMAGE_RELOCATION_DATA *Image
)
{
CHAR8 *OldBase;
CHAR8 *NewBase;
EFI_IMAGE_DOS_HEADER *DosHdr;
EFI_IMAGE_NT_HEADERS *PeHdr;
UINT32 NumberOfRvaAndSizes;
EFI_IMAGE_DATA_DIRECTORY *DataDirectory;
EFI_IMAGE_DATA_DIRECTORY *RelocDir;
EFI_IMAGE_BASE_RELOCATION *RelocBase;
EFI_IMAGE_BASE_RELOCATION *RelocBaseEnd;
UINT16 *Reloc;
UINT16 *RelocEnd;
CHAR8 *Fixup;
CHAR8 *FixupBase;
UINT16 *F16;
UINT32 *F32;
CHAR8 *FixupData;
UINTN Adjust;
EFI_STATUS Status;
OldBase = (CHAR8 *) ((UINTN) Image->ImageBase);
NewBase = (CHAR8 *) ((UINTN) Image->ImageBase);
Status = RuntimeDriverConvertPointer (0, (VOID **) &NewBase);
ASSERT_EFI_ERROR (Status);
Adjust = (UINTN) NewBase - (UINTN) OldBase;
//
// Find the image's relocate dir info
//
DosHdr = (EFI_IMAGE_DOS_HEADER *) OldBase;
if (DosHdr->e_magic == EFI_IMAGE_DOS_SIGNATURE) {
//
// Valid DOS header so get address of PE header
//
PeHdr = (EFI_IMAGE_NT_HEADERS *) (((CHAR8 *) DosHdr) + DosHdr->e_lfanew);
} else {
//
// No Dos header so assume image starts with PE header.
//
PeHdr = (EFI_IMAGE_NT_HEADERS *) OldBase;
}
if (PeHdr->Signature != EFI_IMAGE_NT_SIGNATURE) {
//
// Not a valid PE image so Exit
//
return ;
}
//
// Get some data from the PE type dependent data
//
NumberOfRvaAndSizes = PeHdr->OptionalHeader.NumberOfRvaAndSizes;
DataDirectory = &PeHdr->OptionalHeader.DataDirectory[0];
//
// Find the relocation block
//
// Per the PE/COFF spec, you can't assume that a given data directory
// is present in the image. You have to check the NumberOfRvaAndSizes in
// the optional header to verify a desired directory entry is there.
//
if (NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) {
RelocDir = DataDirectory + EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC;
RelocBase = RuntimePeImageAddress (Image, RelocDir->VirtualAddress);
RelocBaseEnd = RuntimePeImageAddress (Image, RelocDir->VirtualAddress + RelocDir->Size);
} else {
//
// Cannot find relocations, cannot continue
//
ASSERT (FALSE);
return ;
}
ASSERT (RelocBase != NULL && RelocBaseEnd != NULL);
//
// Run the whole relocation block. And re-fixup data that has not been
// modified. The FixupData is used to see if the image has been modified
// since it was relocated. This is so data sections that have been updated
// by code will not be fixed up, since that would set them back to
// defaults.
//
FixupData = Image->RelocationData;
while (RelocBase < RelocBaseEnd) {
Reloc = (UINT16 *) ((UINT8 *) RelocBase + sizeof (EFI_IMAGE_BASE_RELOCATION));
RelocEnd = (UINT16 *) ((UINT8 *) RelocBase + RelocBase->SizeOfBlock);
FixupBase = (CHAR8 *) ((UINTN) Image->ImageBase) + RelocBase->VirtualAddress;
//
// Run this relocation record
//
while (Reloc < RelocEnd) {
Fixup = FixupBase + (*Reloc & 0xFFF);
switch ((*Reloc) >> 12) {
case EFI_IMAGE_REL_BASED_ABSOLUTE:
break;
case EFI_IMAGE_REL_BASED_HIGH:
F16 = (UINT16 *) Fixup;
if (*(UINT16 *) FixupData == *F16) {
*F16 = (UINT16) ((*F16 << 16) + ((UINT16) Adjust & 0xffff));
}
FixupData = FixupData + sizeof (UINT16);
break;
case EFI_IMAGE_REL_BASED_LOW:
F16 = (UINT16 *) Fixup;
if (*(UINT16 *) FixupData == *F16) {
*F16 = (UINT16) (*F16 + ((UINT16) Adjust & 0xffff));
}
FixupData = FixupData + sizeof (UINT16);
break;
case EFI_IMAGE_REL_BASED_HIGHLOW:
F32 = (UINT32 *) Fixup;
FixupData = ALIGN_POINTER (FixupData, sizeof (UINT32));
if (*(UINT32 *) FixupData == *F32) {
*F32 = *F32 + (UINT32) Adjust;
}
FixupData = FixupData + sizeof (UINT32);
break;
case EFI_IMAGE_REL_BASED_HIGHADJ:
//
// Not implemented, but not used in EFI 1.0
//
ASSERT (FALSE);
break;
default:
//
// Only Itanium requires ConvertPeImage_Ex
//
Status = PeHotRelocateImageEx (Reloc, Fixup, &FixupData, Adjust);
if (EFI_ERROR (Status)) {
return ;
}
}
//
// Next relocation record
//
Reloc += 1;
}
//
// next reloc block
//
RelocBase = (EFI_IMAGE_BASE_RELOCATION *) RelocEnd;
}
FlushCpuCache (Image->ImageBase, (UINT64) Image->ImageSize);
}