audk/OvmfPkg/OvmfPkgIa32X64.fdf

322 lines
12 KiB
Plaintext

#/** @file
# Open Virtual Machine Firmware: FDF
#
# Copyright (c) 2006 - 2009, Intel Corporation
#
# All rights reserved. This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
# which accompanies this distribution. The full text of the license may be found at
# http://opensource.org/licenses/bsd-license.php
#
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#
#**/
################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into the Flash Device Image. Each FD section
# defines one flash "device" image. A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash" image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################
[FD.OVMF]
BaseAddress = 0xFFE00000 # The base address of the FLASH Device.
Size = 0x00200000 # The size in bytes of the FLASH Device
ErasePolarity = 1
BlockSize = 0x10000
NumBlocks = 0x20
################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################
0x0|0x200000
gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize
FV = MAINFV
################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file. This section also defines order the components and modules are positioned
# within the image. The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################
[FV.DXEFV]
BlockSize = 0x1000
FvAlignment = 16 #FV alignment and FV attributes setting.
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
#
# Files to be placed in DXEFV
#
# This firmware volume will have files placed in it uncompressed,
# and then then entire firmware volume will be compressed in a
# single compression operation in order to achieve better
# overall compression.
#
APRIORI DXE {
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
}
#
# DXE Phase modules
#
INF MdeModulePkg/Core/Dxe/DxeMain.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/RuntimeDxe/StatusCodeRuntimeDxe.inf
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf
INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
INF UefiCpuPkg/CpuIoDxe/CpuIo.inf
INF UefiCpuPkg/CpuDxe/CpuDxe.inf
INF PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
INF PcAtChipsetPkg/PciHostBridgeDxe/PciHostBridgeDxe.inf
INF IntelFrameworkModulePkg/Bus/Pci/PciBusDxe/PciBusDxe.inf
INF PcAtChipsetPkg/KbcResetDxe/Reset.inf
INF MdeModulePkg/Universal/Metronome/Metronome.inf
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf
INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf
INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
INF MdeModulePkg/Universal/PrintDxe/PrintDxe.inf
INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
INF IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf
INF PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf
INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf
INF RuleOverride = ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf
FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {
SECTION PE32 = FatBinPkg/EnhancedFatDxe/X64/Fat.efi
}
FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) {
SECTION PE32 = EdkShellBinPkg/FullShell/X64/Shell_full.efi
}
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
SECTION RAW = MdeModulePkg/Logo/Logo.bmp
}
}
################################################################################
[FV.MAINFV]
FvAlignment = 16
ERASE_POLARITY = 1
MEMORY_MAPPED = TRUE
STICKY_WRITE = TRUE
LOCK_CAP = TRUE
LOCK_STATUS = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP = TRUE
WRITE_STATUS = TRUE
WRITE_LOCK_CAP = TRUE
WRITE_LOCK_STATUS = TRUE
READ_DISABLED_CAP = TRUE
READ_ENABLED_CAP = TRUE
READ_STATUS = TRUE
READ_LOCK_CAP = TRUE
READ_LOCK_STATUS = TRUE
#
# Files to be placed in MAINFV
#
# This firmware volume will have all the files placed in it which
# must not be compressed at the initial boot phase. The only
# exception to this is the compressed 'DXEFV'.
#
APRIORI PEI {
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
}
#
# SEC Phase modules
#
INF OvmfPkg/Sec/SecMain.inf
#
# PEI Phase modules
#
INF MdeModulePkg/Core/Pei/PeiMain.inf
INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
INF OvmfPkg/PlatformPei/PlatformPei.inf
INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
#
# This file contains the compressed 'DXEFV', which is compressed
# in a single compression operation in order to achieve better
# overall compression.
#
FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {
SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress
SECTION FV_IMAGE = DXEFV
}
}
FILE RAW = 1BA0062E-C779-4582-8566-336AE8F78F09 {
SECTION RAW = OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw
}
################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################
[Rule.Common.PEI_CORE]
FILE PEI_CORE = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.SEC]
FILE SEC = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING ="$(MODULE_NAME)" Optional
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.PEIM.TIANOCOMPRESSED]
FILE PEIM = $(NAMED_GUID) {
PEI_DEPEX PEI_DEPEX Optional |.depex
GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
}
[Rule.Common.DXE_CORE]
FILE DXE_CORE = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.DXE_RUNTIME_DRIVER]
FILE DRIVER = $(NAMED_GUID) {
DXE_DEPEX DXE_DEPEX Optional |.depex
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.UEFI_APPLICATION]
FILE APPLICATION = $(NAMED_GUID) {
PE32 PE32 |.efi
UI STRING="$(MODULE_NAME)" Optional
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
}
[Rule.Common.USER_DEFINED.ACPITABLE]
FILE FREEFORM = $(NAMED_GUID) {
RAW ACPI |.acpi
RAW ASL |.aml
}
[Rule.Common.SEC.RESET_VECTOR]
FILE RAW = $(NAMED_GUID) {
RAW RAW |.raw
}
[OptionRom.CirrusLogic5446]
INF OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf {
PCI_DEVICE_ID = 0x00B8
}