mirror of https://github.com/acidanthera/audk.git
338 lines
10 KiB
C
338 lines
10 KiB
C
/** @file
|
|
16550 UART Serial Port library functions
|
|
|
|
Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR>
|
|
This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
|
|
#include <Base.h>
|
|
#include <Library/SerialPortLib.h>
|
|
#include <Library/PcdLib.h>
|
|
#include <Library/IoLib.h>
|
|
#include <Library/PlatformHookLib.h>
|
|
|
|
//
|
|
// 16550 UART register offsets and bitfields
|
|
//
|
|
#define R_UART_RXBUF 0
|
|
#define R_UART_TXBUF 0
|
|
#define R_UART_BAUD_LOW 0
|
|
#define R_UART_BAUD_HIGH 1
|
|
#define R_UART_FCR 2
|
|
#define B_UART_FCR_FIFOE BIT0
|
|
#define B_UART_FCR_FIFO64 BIT5
|
|
#define R_UART_LCR 3
|
|
#define B_UART_LCR_DLAB BIT7
|
|
#define R_UART_MCR 4
|
|
#define B_UART_MCR_RTS BIT1
|
|
#define R_UART_LSR 5
|
|
#define B_UART_LSR_RXRDY BIT0
|
|
#define B_UART_LSR_TXRDY BIT5
|
|
#define B_UART_LSR_TEMT BIT6
|
|
#define R_UART_MSR 6
|
|
#define B_UART_MSR_CTS BIT4
|
|
#define B_UART_MSR_DCD BIT7
|
|
|
|
/**
|
|
Read an 8-bit 16550 register. If PcdSerialUseMmio is TRUE, then the value is read from
|
|
MMIO space. If PcdSerialUseMmio is FALSE, then the value is read from I/O space. The
|
|
parameter Offset is added to the base address of the 16550 registers that is specified
|
|
by PcdSerialRegisterBase.
|
|
|
|
@param Offset The offset of the 16550 register to read.
|
|
|
|
@return The value read from the 16550 register.
|
|
|
|
**/
|
|
UINT8
|
|
SerialPortReadRegister (
|
|
UINTN Offset
|
|
)
|
|
{
|
|
if (PcdGetBool (PcdSerialUseMmio)) {
|
|
return MmioRead8 ((UINTN)PcdGet64 (PcdSerialRegisterBase) + Offset);
|
|
} else {
|
|
return IoRead8 ((UINT16)PcdGet64 (PcdSerialRegisterBase) + Offset);
|
|
}
|
|
}
|
|
|
|
/**
|
|
Write an 8-bit 16550 register. If PcdSerialUseMmio is TRUE, then the value is written to
|
|
MMIO space. If PcdSerialUseMmio is FALSE, then the value is written to I/O space. The
|
|
parameter Offset is added to the base address of the 16550 registers that is specified
|
|
by PcdSerialRegisterBase.
|
|
|
|
@param Offset The offset of the 16550 register to read.
|
|
|
|
@return The value written to the 16550 register.
|
|
|
|
**/
|
|
UINT8
|
|
SerialPortWriteRegister (
|
|
UINTN Offset,
|
|
UINT8 Value
|
|
)
|
|
{
|
|
if (PcdGetBool (PcdSerialUseMmio)) {
|
|
return MmioWrite8 ((UINTN)PcdGet64 (PcdSerialRegisterBase) + Offset, Value);
|
|
} else {
|
|
return IoWrite8 ((UINT16)PcdGet64 (PcdSerialRegisterBase) + Offset, Value);
|
|
}
|
|
}
|
|
|
|
/**
|
|
Initialize the serial device hardware.
|
|
|
|
If no initialization is required, then return RETURN_SUCCESS.
|
|
If the serial device was successfuly initialized, then return RETURN_SUCCESS.
|
|
If the serial device could not be initialized, then return RETURN_DEVICE_ERROR.
|
|
|
|
@retval RETURN_SUCCESS The serial device was initialized.
|
|
@retval RETURN_DEVICE_ERROR The serial device could not be initialized.
|
|
|
|
**/
|
|
RETURN_STATUS
|
|
EFIAPI
|
|
SerialPortInitialize (
|
|
VOID
|
|
)
|
|
{
|
|
RETURN_STATUS Status;
|
|
UINTN Divisor;
|
|
BOOLEAN Initialized;
|
|
|
|
//
|
|
// Perform platform specific initialization required to enable use of the 16550 device
|
|
// at the location specified by PcdSerialUseMmio and PcdSerialRegisterBase.
|
|
//
|
|
Status = PlatformHookSerialPortInitialize ();
|
|
if (RETURN_ERROR (Status)) {
|
|
return Status;
|
|
}
|
|
|
|
//
|
|
// See if the serial port is already initialized
|
|
//
|
|
Initialized = TRUE;
|
|
if ((SerialPortReadRegister (R_UART_FCR) & (B_UART_FCR_FIFOE | B_UART_FCR_FIFO64)) !=
|
|
(PcdGet8 (PcdSerialFifoControl) & (B_UART_FCR_FIFOE | B_UART_FCR_FIFO64)) ) {
|
|
Initialized = FALSE;
|
|
}
|
|
if ((SerialPortReadRegister (R_UART_LCR) & 0x3F) != (PcdGet8 (PcdSerialLineControl) & 0x3F)) {
|
|
Initialized = FALSE;
|
|
}
|
|
SerialPortWriteRegister (R_UART_LCR, (UINT8)(SerialPortReadRegister (R_UART_LCR) | B_UART_LCR_DLAB));
|
|
Divisor = SerialPortReadRegister (R_UART_BAUD_HIGH) << 8;
|
|
Divisor |= SerialPortReadRegister (R_UART_BAUD_LOW);
|
|
SerialPortWriteRegister (R_UART_LCR, (UINT8)(SerialPortReadRegister (R_UART_LCR) & ~B_UART_LCR_DLAB));
|
|
if (Divisor != 115200 / PcdGet32 (PcdSerialBaudRate)) {
|
|
Initialized = FALSE;
|
|
}
|
|
if (Initialized) {
|
|
return RETURN_SUCCESS;
|
|
}
|
|
|
|
//
|
|
// Configure baud rate
|
|
//
|
|
Divisor = 115200 / PcdGet32 (PcdSerialBaudRate);
|
|
SerialPortWriteRegister (R_UART_LCR, B_UART_LCR_DLAB);
|
|
SerialPortWriteRegister (R_UART_BAUD_HIGH, (UINT8) (Divisor >> 8));
|
|
SerialPortWriteRegister (R_UART_BAUD_LOW, (UINT8) (Divisor & 0xff));
|
|
|
|
//
|
|
// Clear DLAB and configure Data Bits, Parity, and Stop Bits.
|
|
// Strip reserved bits from PcdSerialLineControl
|
|
//
|
|
SerialPortWriteRegister (R_UART_LCR, (UINT8)(PcdGet8 (PcdSerialLineControl) & 0x3F));
|
|
|
|
//
|
|
// Enable and reset FIFOs
|
|
// Strip reserved bits from PcdSerialFifoControl
|
|
//
|
|
SerialPortWriteRegister (R_UART_FCR, (UINT8)(PcdGet8 (PcdSerialFifoControl) & 0x17));
|
|
|
|
//
|
|
// Put Modem Control Register(MCR) into its reset state of 0x00.
|
|
//
|
|
SerialPortWriteRegister (R_UART_MCR, 0x00);
|
|
|
|
return RETURN_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Write data from buffer to serial device.
|
|
|
|
Writes NumberOfBytes data bytes from Buffer to the serial device.
|
|
The number of bytes actually written to the serial device is returned.
|
|
If the return value is less than NumberOfBytes, then the write operation failed.
|
|
|
|
If Buffer is NULL, then ASSERT().
|
|
|
|
If NumberOfBytes is zero, then return 0.
|
|
|
|
@param Buffer Pointer to the data buffer to be written.
|
|
@param NumberOfBytes Number of bytes to written to the serial device.
|
|
|
|
@retval 0 NumberOfBytes is 0.
|
|
@retval >0 The number of bytes written to the serial device.
|
|
If this value is less than NumberOfBytes, then the read operation failed.
|
|
|
|
**/
|
|
UINTN
|
|
EFIAPI
|
|
SerialPortWrite (
|
|
IN UINT8 *Buffer,
|
|
IN UINTN NumberOfBytes
|
|
)
|
|
{
|
|
UINTN Result;
|
|
UINTN Index;
|
|
UINTN FifoSize;
|
|
|
|
if (Buffer == NULL) {
|
|
return 0;
|
|
}
|
|
|
|
//
|
|
// Compute the maximum size of the Tx FIFO
|
|
//
|
|
FifoSize = 1;
|
|
if ((PcdGet8 (PcdSerialFifoControl) & B_UART_FCR_FIFOE) != 0) {
|
|
if ((PcdGet8 (PcdSerialFifoControl) & B_UART_FCR_FIFO64) == 0) {
|
|
FifoSize = 16;
|
|
} else {
|
|
FifoSize = 64;
|
|
}
|
|
}
|
|
|
|
Result = NumberOfBytes;
|
|
while (NumberOfBytes != 0) {
|
|
//
|
|
// Wait for the serial port to be ready, to make sure both the transmit FIFO
|
|
// and shift register empty.
|
|
//
|
|
while ((SerialPortReadRegister (R_UART_LSR) & B_UART_LSR_TEMT) == 0);
|
|
|
|
//
|
|
// Fill then entire Tx FIFO
|
|
//
|
|
for (Index = 0; Index < FifoSize && NumberOfBytes != 0; Index++, NumberOfBytes--, Buffer++) {
|
|
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
|
|
//
|
|
// Wait for notification from peer to send data
|
|
//
|
|
while ((SerialPortReadRegister (R_UART_MSR) & (B_UART_MSR_CTS | B_UART_MSR_DCD)) == B_UART_MSR_DCD);
|
|
}
|
|
|
|
//
|
|
// Write byte to the transmit buffer.
|
|
//
|
|
SerialPortWriteRegister (R_UART_TXBUF, *Buffer);
|
|
}
|
|
}
|
|
return Result;
|
|
}
|
|
|
|
/**
|
|
Reads data from a serial device into a buffer.
|
|
|
|
@param Buffer Pointer to the data buffer to store the data read from the serial device.
|
|
@param NumberOfBytes Number of bytes to read from the serial device.
|
|
|
|
@retval 0 NumberOfBytes is 0.
|
|
@retval >0 The number of bytes read from the serial device.
|
|
If this value is less than NumberOfBytes, then the read operation failed.
|
|
|
|
**/
|
|
UINTN
|
|
EFIAPI
|
|
SerialPortRead (
|
|
OUT UINT8 *Buffer,
|
|
IN UINTN NumberOfBytes
|
|
)
|
|
{
|
|
UINTN Result;
|
|
UINT8 Mcr;
|
|
|
|
if (NULL == Buffer) {
|
|
return 0;
|
|
}
|
|
|
|
Mcr = (UINT8)(SerialPortReadRegister (R_UART_MCR) & ~B_UART_MCR_RTS);
|
|
|
|
for (Result = 0; NumberOfBytes-- != 0; Result++, Buffer++) {
|
|
//
|
|
// Wait for the serial port to have some data.
|
|
//
|
|
while ((SerialPortReadRegister (R_UART_LSR) & B_UART_LSR_RXRDY) == 0) {
|
|
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
|
|
//
|
|
// Set RTS to let the peer send some data
|
|
//
|
|
SerialPortWriteRegister (R_UART_MCR, (UINT8)(Mcr | B_UART_MCR_RTS));
|
|
}
|
|
}
|
|
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
|
|
//
|
|
// Clear RTS to prevent peer from sending data
|
|
//
|
|
SerialPortWriteRegister (R_UART_MCR, Mcr);
|
|
}
|
|
|
|
//
|
|
// Read byte from the receive buffer.
|
|
//
|
|
*Buffer = SerialPortReadRegister (R_UART_RXBUF);
|
|
}
|
|
|
|
return Result;
|
|
}
|
|
|
|
/**
|
|
Polls a serial device to see if there is any data waiting to be read.
|
|
|
|
Polls aserial device to see if there is any data waiting to be read.
|
|
If there is data waiting to be read from the serial device, then TRUE is returned.
|
|
If there is no data waiting to be read from the serial device, then FALSE is returned.
|
|
|
|
@retval TRUE Data is waiting to be read from the serial device.
|
|
@retval FALSE There is no data waiting to be read from the serial device.
|
|
|
|
**/
|
|
BOOLEAN
|
|
EFIAPI
|
|
SerialPortPoll (
|
|
VOID
|
|
)
|
|
{
|
|
//
|
|
// Read the serial port status
|
|
//
|
|
if ((SerialPortReadRegister (R_UART_LSR) & B_UART_LSR_RXRDY) != 0) {
|
|
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
|
|
//
|
|
// Clear RTS to prevent peer from sending data
|
|
//
|
|
SerialPortWriteRegister (R_UART_MCR, (UINT8)(SerialPortReadRegister (R_UART_MCR) & ~B_UART_MCR_RTS));
|
|
}
|
|
return TRUE;
|
|
}
|
|
|
|
if (PcdGetBool (PcdSerialUseHardwareFlowControl)) {
|
|
//
|
|
// Set RTS to let the peer send some data
|
|
//
|
|
SerialPortWriteRegister (R_UART_MCR, (UINT8)(SerialPortReadRegister (R_UART_MCR) | B_UART_MCR_RTS));
|
|
}
|
|
|
|
return FALSE;
|
|
}
|