mirror of https://github.com/acidanthera/audk.git
1996 lines
57 KiB
C
1996 lines
57 KiB
C
/** @file
|
|
Serial driver for standard UARTS on an ISA bus.
|
|
|
|
Copyright (c) 2006 - 2010, Intel Corporation<BR>
|
|
All rights reserved. This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
|
|
#include "Serial.h"
|
|
|
|
//
|
|
// ISA Serial Driver Global Variables
|
|
//
|
|
EFI_DRIVER_BINDING_PROTOCOL gSerialControllerDriver = {
|
|
SerialControllerDriverSupported,
|
|
SerialControllerDriverStart,
|
|
SerialControllerDriverStop,
|
|
0xa,
|
|
NULL,
|
|
NULL
|
|
};
|
|
|
|
|
|
SERIAL_DEV gSerialDevTempate = {
|
|
SERIAL_DEV_SIGNATURE,
|
|
NULL,
|
|
{ // SerialIo
|
|
SERIAL_IO_INTERFACE_REVISION,
|
|
IsaSerialReset,
|
|
IsaSerialSetAttributes,
|
|
IsaSerialSetControl,
|
|
IsaSerialGetControl,
|
|
IsaSerialWrite,
|
|
IsaSerialRead,
|
|
NULL
|
|
},
|
|
{ // SerialMode
|
|
SERIAL_PORT_SUPPORT_CONTROL_MASK,
|
|
SERIAL_PORT_DEFAULT_TIMEOUT,
|
|
FixedPcdGet64 (PcdUartDefaultBaudRate), // BaudRate
|
|
SERIAL_PORT_DEFAULT_RECEIVE_FIFO_DEPTH,
|
|
FixedPcdGet8 (PcdUartDefaultDataBits), // DataBits
|
|
FixedPcdGet8 (PcdUartDefaultParity), // Parity
|
|
FixedPcdGet8 (PcdUartDefaultStopBits) // StopBits
|
|
},
|
|
NULL,
|
|
NULL,
|
|
{ // UartDevicePath
|
|
{
|
|
MESSAGING_DEVICE_PATH,
|
|
MSG_UART_DP,
|
|
{
|
|
(UINT8) (sizeof (UART_DEVICE_PATH)),
|
|
(UINT8) ((sizeof (UART_DEVICE_PATH)) >> 8)
|
|
}
|
|
},
|
|
0,
|
|
FixedPcdGet64 (PcdUartDefaultBaudRate),
|
|
FixedPcdGet8 (PcdUartDefaultDataBits),
|
|
FixedPcdGet8 (PcdUartDefaultParity),
|
|
FixedPcdGet8 (PcdUartDefaultStopBits)
|
|
},
|
|
NULL,
|
|
0, //BaseAddress
|
|
{
|
|
0,
|
|
0,
|
|
SERIAL_MAX_BUFFER_SIZE,
|
|
{ 0 }
|
|
},
|
|
{
|
|
0,
|
|
0,
|
|
SERIAL_MAX_BUFFER_SIZE,
|
|
{ 0 }
|
|
},
|
|
FALSE,
|
|
FALSE,
|
|
Uart16550A,
|
|
NULL
|
|
};
|
|
|
|
/**
|
|
Check the device path node whether it's the Flow Control node or not.
|
|
|
|
@param[in] FlowControl The device path node to be checked.
|
|
|
|
@retval TRUE It's the Flow Control node.
|
|
@retval FALSE It's not.
|
|
|
|
**/
|
|
BOOLEAN
|
|
IsUartFlowControlNode (
|
|
IN UART_FLOW_CONTROL_DEVICE_PATH *FlowControl
|
|
)
|
|
{
|
|
return (BOOLEAN) (
|
|
(DevicePathType (FlowControl) == MESSAGING_DEVICE_PATH) &&
|
|
(DevicePathSubType (FlowControl) == MSG_VENDOR_DP) &&
|
|
(CompareGuid (&FlowControl->Guid, &gEfiUartDevicePathGuid))
|
|
);
|
|
}
|
|
|
|
/**
|
|
Check the device path node whether it contains Flow Control node or not.
|
|
|
|
@param[in] DevicePath The device path to be checked.
|
|
|
|
@retval TRUE It contains the Flow Control node.
|
|
@retval FALSE It doesn't.
|
|
|
|
**/
|
|
BOOLEAN
|
|
ContainsFlowControl (
|
|
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath
|
|
)
|
|
{
|
|
while (!IsDevicePathEnd (DevicePath)) {
|
|
if (IsUartFlowControlNode ((UART_FLOW_CONTROL_DEVICE_PATH *) DevicePath)) {
|
|
return TRUE;
|
|
}
|
|
DevicePath = NextDevicePathNode (DevicePath);
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/**
|
|
The user Entry Point for module IsaSerial. The user code starts with this function.
|
|
|
|
@param[in] ImageHandle The firmware allocated handle for the EFI image.
|
|
@param[in] SystemTable A pointer to the EFI System Table.
|
|
|
|
@retval EFI_SUCCESS The entry point is executed successfully.
|
|
@retval other Some error occurs when executing this entry point.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
InitializeIsaSerial (
|
|
IN EFI_HANDLE ImageHandle,
|
|
IN EFI_SYSTEM_TABLE *SystemTable
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
|
|
//
|
|
// Install driver model protocol(s).
|
|
//
|
|
Status = EfiLibInstallDriverBindingComponentName2 (
|
|
ImageHandle,
|
|
SystemTable,
|
|
&gSerialControllerDriver,
|
|
ImageHandle,
|
|
&gIsaSerialComponentName,
|
|
&gIsaSerialComponentName2
|
|
);
|
|
ASSERT_EFI_ERROR (Status);
|
|
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Check to see if this driver supports the given controller
|
|
|
|
@param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
|
@param Controller The handle of the controller to test.
|
|
@param RemainingDevicePath A pointer to the remaining portion of a device path.
|
|
|
|
@return EFI_SUCCESS This driver can support the given controller
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
SerialControllerDriverSupported (
|
|
IN EFI_DRIVER_BINDING_PROTOCOL *This,
|
|
IN EFI_HANDLE Controller,
|
|
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
|
|
)
|
|
|
|
{
|
|
EFI_STATUS Status;
|
|
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
|
|
EFI_ISA_IO_PROTOCOL *IsaIo;
|
|
UART_DEVICE_PATH *UartNode;
|
|
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
|
|
UART_FLOW_CONTROL_DEVICE_PATH *FlowControlNode;
|
|
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
|
|
UINTN EntryCount;
|
|
UINTN Index;
|
|
BOOLEAN HasFlowControl;
|
|
|
|
//
|
|
// Check RemainingDevicePath validation
|
|
//
|
|
if (RemainingDevicePath != NULL) {
|
|
//
|
|
// Check if RemainingDevicePath is the End of Device Path Node,
|
|
// if yes, go on checking other conditions
|
|
//
|
|
if (!IsDevicePathEnd (RemainingDevicePath)) {
|
|
//
|
|
// If RemainingDevicePath isn't the End of Device Path Node,
|
|
// check its validation
|
|
//
|
|
Status = EFI_UNSUPPORTED;
|
|
|
|
UartNode = (UART_DEVICE_PATH *) RemainingDevicePath;
|
|
if (UartNode->Header.Type != MESSAGING_DEVICE_PATH ||
|
|
UartNode->Header.SubType != MSG_UART_DP ||
|
|
sizeof (UART_DEVICE_PATH) != DevicePathNodeLength ((EFI_DEVICE_PATH_PROTOCOL *) UartNode)
|
|
) {
|
|
goto Error;
|
|
}
|
|
|
|
if (UartNode->BaudRate > SERIAL_PORT_MAX_BAUD_RATE) {
|
|
goto Error;
|
|
}
|
|
|
|
if (UartNode->Parity < NoParity || UartNode->Parity > SpaceParity) {
|
|
goto Error;
|
|
}
|
|
|
|
if (UartNode->DataBits < 5 || UartNode->DataBits > 8) {
|
|
goto Error;
|
|
}
|
|
|
|
if (UartNode->StopBits < OneStopBit || UartNode->StopBits > TwoStopBits) {
|
|
goto Error;
|
|
}
|
|
|
|
if ((UartNode->DataBits == 5) && (UartNode->StopBits == TwoStopBits)) {
|
|
goto Error;
|
|
}
|
|
|
|
if ((UartNode->DataBits >= 6) && (UartNode->DataBits <= 8) && (UartNode->StopBits == OneFiveStopBits)) {
|
|
goto Error;
|
|
}
|
|
|
|
FlowControlNode = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (UartNode);
|
|
if (IsUartFlowControlNode (FlowControlNode)) {
|
|
//
|
|
// If the second node is Flow Control Node,
|
|
// return error when it request other than hardware flow control.
|
|
//
|
|
if ((ReadUnaligned32 (&FlowControlNode->FlowControlMap) & ~UART_FLOW_CONTROL_HARDWARE) != 0) {
|
|
goto Error;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
//
|
|
// Open the IO Abstraction(s) needed to perform the supported test
|
|
//
|
|
Status = gBS->OpenProtocol (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
(VOID **) &IsaIo,
|
|
This->DriverBindingHandle,
|
|
Controller,
|
|
EFI_OPEN_PROTOCOL_BY_DRIVER
|
|
);
|
|
if (Status == EFI_ALREADY_STARTED) {
|
|
if (RemainingDevicePath == NULL || IsDevicePathEnd (RemainingDevicePath)) {
|
|
//
|
|
// If RemainingDevicePath is NULL or is the End of Device Path Node
|
|
//
|
|
return EFI_SUCCESS;
|
|
}
|
|
//
|
|
// When the driver has produced device path with flow control node but RemainingDevicePath only contains UART node,
|
|
// return unsupported, and vice versa.
|
|
//
|
|
Status = gBS->OpenProtocolInformation (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
&OpenInfoBuffer,
|
|
&EntryCount
|
|
);
|
|
if (EFI_ERROR (Status)) {
|
|
return Status;
|
|
}
|
|
|
|
for (Index = 0; Index < EntryCount; Index++) {
|
|
if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {
|
|
Status = gBS->OpenProtocol (
|
|
OpenInfoBuffer[Index].ControllerHandle,
|
|
&gEfiDevicePathProtocolGuid,
|
|
(VOID **) &DevicePath,
|
|
This->DriverBindingHandle,
|
|
Controller,
|
|
EFI_OPEN_PROTOCOL_GET_PROTOCOL
|
|
);
|
|
if (!EFI_ERROR (Status)) {
|
|
HasFlowControl = ContainsFlowControl (RemainingDevicePath);
|
|
if (HasFlowControl ^ ContainsFlowControl (DevicePath)) {
|
|
Status = EFI_UNSUPPORTED;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
FreePool (OpenInfoBuffer);
|
|
return Status;
|
|
}
|
|
|
|
if (EFI_ERROR (Status)) {
|
|
return Status;
|
|
}
|
|
|
|
//
|
|
// Close the I/O Abstraction(s) used to perform the supported test
|
|
//
|
|
gBS->CloseProtocol (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
This->DriverBindingHandle,
|
|
Controller
|
|
);
|
|
|
|
//
|
|
// Open the EFI Device Path protocol needed to perform the supported test
|
|
//
|
|
Status = gBS->OpenProtocol (
|
|
Controller,
|
|
&gEfiDevicePathProtocolGuid,
|
|
(VOID **) &ParentDevicePath,
|
|
This->DriverBindingHandle,
|
|
Controller,
|
|
EFI_OPEN_PROTOCOL_BY_DRIVER
|
|
);
|
|
if (Status == EFI_ALREADY_STARTED) {
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
if (EFI_ERROR (Status)) {
|
|
return Status;
|
|
}
|
|
//
|
|
// Use the ISA I/O Protocol to see if Controller is standard ISA UART that
|
|
// can be managed by this driver.
|
|
//
|
|
Status = EFI_SUCCESS;
|
|
if (IsaIo->ResourceList->Device.HID != EISA_PNP_ID (0x501)) {
|
|
Status = EFI_UNSUPPORTED;
|
|
goto Error;
|
|
}
|
|
|
|
Error:
|
|
//
|
|
// Close protocol, don't use device path protocol in the Support() function
|
|
//
|
|
gBS->CloseProtocol (
|
|
Controller,
|
|
&gEfiDevicePathProtocolGuid,
|
|
This->DriverBindingHandle,
|
|
Controller
|
|
);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Start to management the controller passed in
|
|
|
|
@param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
|
@param Controller The handle of the controller to test.
|
|
@param RemainingDevicePath A pointer to the remaining portion of a device path.
|
|
|
|
@return EFI_SUCCESS Driver is started successfully
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
SerialControllerDriverStart (
|
|
IN EFI_DRIVER_BINDING_PROTOCOL *This,
|
|
IN EFI_HANDLE Controller,
|
|
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
|
|
)
|
|
|
|
{
|
|
EFI_STATUS Status;
|
|
EFI_ISA_IO_PROTOCOL *IsaIo;
|
|
SERIAL_DEV *SerialDevice;
|
|
UINTN Index;
|
|
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
|
|
EFI_OPEN_PROTOCOL_INFORMATION_ENTRY *OpenInfoBuffer;
|
|
UINTN EntryCount;
|
|
EFI_SERIAL_IO_PROTOCOL *SerialIo;
|
|
UART_DEVICE_PATH *Uart;
|
|
UINT32 FlowControlMap;
|
|
UART_FLOW_CONTROL_DEVICE_PATH *FlowControl;
|
|
EFI_DEVICE_PATH_PROTOCOL *TempDevicePath;
|
|
UINT32 Control;
|
|
|
|
SerialDevice = NULL;
|
|
//
|
|
// Get the Parent Device Path
|
|
//
|
|
Status = gBS->OpenProtocol (
|
|
Controller,
|
|
&gEfiDevicePathProtocolGuid,
|
|
(VOID **) &ParentDevicePath,
|
|
This->DriverBindingHandle,
|
|
Controller,
|
|
EFI_OPEN_PROTOCOL_BY_DRIVER
|
|
);
|
|
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
|
|
return Status;
|
|
}
|
|
//
|
|
// Report status code enable the serial
|
|
//
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_PROGRESS_CODE,
|
|
EFI_P_PC_ENABLE | EFI_PERIPHERAL_SERIAL_PORT,
|
|
ParentDevicePath
|
|
);
|
|
|
|
//
|
|
// Grab the IO abstraction we need to get any work done
|
|
//
|
|
Status = gBS->OpenProtocol (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
(VOID **) &IsaIo,
|
|
This->DriverBindingHandle,
|
|
Controller,
|
|
EFI_OPEN_PROTOCOL_BY_DRIVER
|
|
);
|
|
if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {
|
|
goto Error;
|
|
}
|
|
|
|
if (Status == EFI_ALREADY_STARTED) {
|
|
|
|
if (RemainingDevicePath == NULL || IsDevicePathEnd (RemainingDevicePath)) {
|
|
//
|
|
// If RemainingDevicePath is NULL or is the End of Device Path Node
|
|
//
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
//
|
|
// Make sure a child handle does not already exist. This driver can only
|
|
// produce one child per serial port.
|
|
//
|
|
Status = gBS->OpenProtocolInformation (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
&OpenInfoBuffer,
|
|
&EntryCount
|
|
);
|
|
if (EFI_ERROR (Status)) {
|
|
return Status;
|
|
}
|
|
|
|
Status = EFI_ALREADY_STARTED;
|
|
for (Index = 0; Index < EntryCount; Index++) {
|
|
if ((OpenInfoBuffer[Index].Attributes & EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER) != 0) {
|
|
Status = gBS->OpenProtocol (
|
|
OpenInfoBuffer[Index].ControllerHandle,
|
|
&gEfiSerialIoProtocolGuid,
|
|
(VOID **) &SerialIo,
|
|
This->DriverBindingHandle,
|
|
Controller,
|
|
EFI_OPEN_PROTOCOL_GET_PROTOCOL
|
|
);
|
|
if (!EFI_ERROR (Status)) {
|
|
Uart = (UART_DEVICE_PATH *) RemainingDevicePath;
|
|
Status = SerialIo->SetAttributes (
|
|
SerialIo,
|
|
Uart->BaudRate,
|
|
SerialIo->Mode->ReceiveFifoDepth,
|
|
SerialIo->Mode->Timeout,
|
|
(EFI_PARITY_TYPE) Uart->Parity,
|
|
Uart->DataBits,
|
|
(EFI_STOP_BITS_TYPE) Uart->StopBits
|
|
);
|
|
|
|
FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (Uart);
|
|
if (!EFI_ERROR (Status) && IsUartFlowControlNode (FlowControl)) {
|
|
Status = SerialIo->GetControl (SerialIo, &Control);
|
|
if (!EFI_ERROR (Status)) {
|
|
if (ReadUnaligned32 (&FlowControl->FlowControlMap) == UART_FLOW_CONTROL_HARDWARE) {
|
|
Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
|
|
} else {
|
|
Control &= ~EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
|
|
}
|
|
//
|
|
// Clear the bits that are not allowed to pass to SetControl
|
|
//
|
|
Control &= (EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY |
|
|
EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE |
|
|
EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE);
|
|
Status = SerialIo->SetControl (SerialIo, Control);
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
FreePool (OpenInfoBuffer);
|
|
return Status;
|
|
}
|
|
|
|
if (RemainingDevicePath != NULL) {
|
|
if (IsDevicePathEnd (RemainingDevicePath)) {
|
|
//
|
|
// If RemainingDevicePath is the End of Device Path Node,
|
|
// skip enumerate any device and return EFI_SUCESSS
|
|
//
|
|
return EFI_SUCCESS;
|
|
}
|
|
}
|
|
|
|
//
|
|
// Initialize the serial device instance
|
|
//
|
|
SerialDevice = AllocateCopyPool (sizeof (SERIAL_DEV), &gSerialDevTempate);
|
|
if (SerialDevice == NULL) {
|
|
Status = EFI_OUT_OF_RESOURCES;
|
|
goto Error;
|
|
}
|
|
|
|
SerialDevice->SerialIo.Mode = &(SerialDevice->SerialMode);
|
|
SerialDevice->IsaIo = IsaIo;
|
|
SerialDevice->ParentDevicePath = ParentDevicePath;
|
|
FlowControl = NULL;
|
|
FlowControlMap = 0;
|
|
|
|
//
|
|
// Check if RemainingDevicePath is NULL,
|
|
// if yes, use the values from the gSerialDevTempate as no remaining device path was
|
|
// passed in.
|
|
//
|
|
if (RemainingDevicePath != NULL) {
|
|
//
|
|
// If RemainingDevicePath isn't NULL,
|
|
// match the configuration of the RemainingDevicePath. IsHandleSupported()
|
|
// already checked to make sure the RemainingDevicePath contains settings
|
|
// that we can support.
|
|
//
|
|
CopyMem (&SerialDevice->UartDevicePath, RemainingDevicePath, sizeof (UART_DEVICE_PATH));
|
|
FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) NextDevicePathNode (RemainingDevicePath);
|
|
if (IsUartFlowControlNode (FlowControl)) {
|
|
FlowControlMap = ReadUnaligned32 (&FlowControl->FlowControlMap);
|
|
} else {
|
|
FlowControl = NULL;
|
|
}
|
|
}
|
|
|
|
AddName (SerialDevice, IsaIo);
|
|
|
|
for (Index = 0; SerialDevice->IsaIo->ResourceList->ResourceItem[Index].Type != EfiIsaAcpiResourceEndOfList; Index++) {
|
|
if (SerialDevice->IsaIo->ResourceList->ResourceItem[Index].Type == EfiIsaAcpiResourceIo) {
|
|
SerialDevice->BaseAddress = (UINT16) SerialDevice->IsaIo->ResourceList->ResourceItem[Index].StartRange;
|
|
}
|
|
}
|
|
|
|
SerialDevice->HardwareFlowControl = (BOOLEAN) (FlowControlMap == UART_FLOW_CONTROL_HARDWARE);
|
|
|
|
//
|
|
// Report status code the serial present
|
|
//
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_PROGRESS_CODE,
|
|
EFI_P_PC_PRESENCE_DETECT | EFI_PERIPHERAL_SERIAL_PORT,
|
|
ParentDevicePath
|
|
);
|
|
|
|
if (!IsaSerialPortPresent (SerialDevice)) {
|
|
Status = EFI_DEVICE_ERROR;
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_ERROR_CODE,
|
|
EFI_P_EC_NOT_DETECTED | EFI_PERIPHERAL_SERIAL_PORT,
|
|
ParentDevicePath
|
|
);
|
|
goto Error;
|
|
}
|
|
|
|
//
|
|
// Build the device path by appending the UART node to the ParentDevicePath.
|
|
// The Uart setings are zero here, since SetAttribute() will update them to match
|
|
// the default setings.
|
|
//
|
|
SerialDevice->DevicePath = AppendDevicePathNode (
|
|
ParentDevicePath,
|
|
(EFI_DEVICE_PATH_PROTOCOL *) &SerialDevice->UartDevicePath
|
|
);
|
|
//
|
|
// Only produce the Flow Control node when remaining device path has it
|
|
//
|
|
if (FlowControl != NULL) {
|
|
TempDevicePath = SerialDevice->DevicePath;
|
|
if (TempDevicePath != NULL) {
|
|
SerialDevice->DevicePath = AppendDevicePathNode (
|
|
TempDevicePath,
|
|
(EFI_DEVICE_PATH_PROTOCOL *) FlowControl
|
|
);
|
|
FreePool (TempDevicePath);
|
|
}
|
|
}
|
|
if (SerialDevice->DevicePath == NULL) {
|
|
Status = EFI_OUT_OF_RESOURCES;
|
|
goto Error;
|
|
}
|
|
|
|
//
|
|
// Fill in Serial I/O Mode structure based on either the RemainingDevicePath or defaults.
|
|
//
|
|
SerialDevice->SerialMode.BaudRate = SerialDevice->UartDevicePath.BaudRate;
|
|
SerialDevice->SerialMode.DataBits = SerialDevice->UartDevicePath.DataBits;
|
|
SerialDevice->SerialMode.Parity = SerialDevice->UartDevicePath.Parity;
|
|
SerialDevice->SerialMode.StopBits = SerialDevice->UartDevicePath.StopBits;
|
|
|
|
//
|
|
// Issue a reset to initialize the COM port
|
|
//
|
|
Status = SerialDevice->SerialIo.Reset (&SerialDevice->SerialIo);
|
|
if (EFI_ERROR (Status)) {
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_ERROR_CODE,
|
|
EFI_P_EC_CONTROLLER_ERROR | EFI_PERIPHERAL_SERIAL_PORT,
|
|
ParentDevicePath
|
|
);
|
|
goto Error;
|
|
}
|
|
//
|
|
// Install protocol interfaces for the serial device.
|
|
//
|
|
Status = gBS->InstallMultipleProtocolInterfaces (
|
|
&SerialDevice->Handle,
|
|
&gEfiDevicePathProtocolGuid,
|
|
SerialDevice->DevicePath,
|
|
&gEfiSerialIoProtocolGuid,
|
|
&SerialDevice->SerialIo,
|
|
NULL
|
|
);
|
|
if (EFI_ERROR (Status)) {
|
|
goto Error;
|
|
}
|
|
//
|
|
// Open For Child Device
|
|
//
|
|
Status = gBS->OpenProtocol (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
(VOID **) &IsaIo,
|
|
This->DriverBindingHandle,
|
|
SerialDevice->Handle,
|
|
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
|
|
);
|
|
|
|
Error:
|
|
if (EFI_ERROR (Status)) {
|
|
gBS->CloseProtocol (
|
|
Controller,
|
|
&gEfiDevicePathProtocolGuid,
|
|
This->DriverBindingHandle,
|
|
Controller
|
|
);
|
|
gBS->CloseProtocol (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
This->DriverBindingHandle,
|
|
Controller
|
|
);
|
|
if (SerialDevice != NULL) {
|
|
if (SerialDevice->DevicePath != NULL) {
|
|
gBS->FreePool (SerialDevice->DevicePath);
|
|
}
|
|
|
|
FreeUnicodeStringTable (SerialDevice->ControllerNameTable);
|
|
gBS->FreePool (SerialDevice);
|
|
}
|
|
}
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Disconnect this driver with the controller, uninstall related protocol instance
|
|
|
|
@param This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
|
|
@param Controller The handle of the controller to test.
|
|
@param NumberOfChildren Number of child device.
|
|
@param ChildHandleBuffer A pointer to the remaining portion of a device path.
|
|
|
|
@retval EFI_SUCCESS Operation successfully
|
|
@retval EFI_DEVICE_ERROR Cannot stop the driver successfully
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
SerialControllerDriverStop (
|
|
IN EFI_DRIVER_BINDING_PROTOCOL *This,
|
|
IN EFI_HANDLE Controller,
|
|
IN UINTN NumberOfChildren,
|
|
IN EFI_HANDLE *ChildHandleBuffer
|
|
)
|
|
|
|
{
|
|
EFI_STATUS Status;
|
|
UINTN Index;
|
|
BOOLEAN AllChildrenStopped;
|
|
EFI_SERIAL_IO_PROTOCOL *SerialIo;
|
|
SERIAL_DEV *SerialDevice;
|
|
EFI_ISA_IO_PROTOCOL *IsaIo;
|
|
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
|
|
|
|
Status = gBS->HandleProtocol (
|
|
Controller,
|
|
&gEfiDevicePathProtocolGuid,
|
|
(VOID **) &DevicePath
|
|
);
|
|
|
|
//
|
|
// Report the status code disable the serial
|
|
//
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_PROGRESS_CODE,
|
|
EFI_P_PC_DISABLE | EFI_PERIPHERAL_SERIAL_PORT,
|
|
DevicePath
|
|
);
|
|
|
|
//
|
|
// Complete all outstanding transactions to Controller.
|
|
// Don't allow any new transaction to Controller to be started.
|
|
//
|
|
if (NumberOfChildren == 0) {
|
|
//
|
|
// Close the bus driver
|
|
//
|
|
Status = gBS->CloseProtocol (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
This->DriverBindingHandle,
|
|
Controller
|
|
);
|
|
|
|
Status = gBS->CloseProtocol (
|
|
Controller,
|
|
&gEfiDevicePathProtocolGuid,
|
|
This->DriverBindingHandle,
|
|
Controller
|
|
);
|
|
return Status;
|
|
}
|
|
|
|
AllChildrenStopped = TRUE;
|
|
|
|
for (Index = 0; Index < NumberOfChildren; Index++) {
|
|
|
|
Status = gBS->OpenProtocol (
|
|
ChildHandleBuffer[Index],
|
|
&gEfiSerialIoProtocolGuid,
|
|
(VOID **) &SerialIo,
|
|
This->DriverBindingHandle,
|
|
Controller,
|
|
EFI_OPEN_PROTOCOL_GET_PROTOCOL
|
|
);
|
|
if (!EFI_ERROR (Status)) {
|
|
|
|
SerialDevice = SERIAL_DEV_FROM_THIS (SerialIo);
|
|
|
|
Status = gBS->CloseProtocol (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
This->DriverBindingHandle,
|
|
ChildHandleBuffer[Index]
|
|
);
|
|
|
|
Status = gBS->UninstallMultipleProtocolInterfaces (
|
|
ChildHandleBuffer[Index],
|
|
&gEfiDevicePathProtocolGuid,
|
|
SerialDevice->DevicePath,
|
|
&gEfiSerialIoProtocolGuid,
|
|
&SerialDevice->SerialIo,
|
|
NULL
|
|
);
|
|
if (EFI_ERROR (Status)) {
|
|
gBS->OpenProtocol (
|
|
Controller,
|
|
&gEfiIsaIoProtocolGuid,
|
|
(VOID **) &IsaIo,
|
|
This->DriverBindingHandle,
|
|
ChildHandleBuffer[Index],
|
|
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
|
|
);
|
|
} else {
|
|
if (SerialDevice->DevicePath != NULL) {
|
|
gBS->FreePool (SerialDevice->DevicePath);
|
|
}
|
|
|
|
FreeUnicodeStringTable (SerialDevice->ControllerNameTable);
|
|
gBS->FreePool (SerialDevice);
|
|
}
|
|
}
|
|
|
|
if (EFI_ERROR (Status)) {
|
|
AllChildrenStopped = FALSE;
|
|
}
|
|
}
|
|
|
|
if (!AllChildrenStopped) {
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Detect whether specific FIFO is full or not.
|
|
|
|
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
|
|
|
|
@return whether specific FIFO is full or not
|
|
|
|
**/
|
|
BOOLEAN
|
|
IsaSerialFifoFull (
|
|
IN SERIAL_DEV_FIFO *Fifo
|
|
)
|
|
|
|
{
|
|
if (Fifo->Surplus == 0) {
|
|
return TRUE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/**
|
|
Detect whether specific FIFO is empty or not.
|
|
|
|
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
|
|
|
|
@return whether specific FIFO is empty or not
|
|
|
|
**/
|
|
BOOLEAN
|
|
IsaSerialFifoEmpty (
|
|
IN SERIAL_DEV_FIFO *Fifo
|
|
)
|
|
|
|
{
|
|
if (Fifo->Surplus == SERIAL_MAX_BUFFER_SIZE) {
|
|
return TRUE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/**
|
|
Add data to specific FIFO.
|
|
|
|
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
|
|
@param Data the data added to FIFO
|
|
|
|
@retval EFI_SUCCESS Add data to specific FIFO successfully
|
|
@retval EFI_OUT_OF_RESOURCE Failed to add data because FIFO is already full
|
|
|
|
**/
|
|
EFI_STATUS
|
|
IsaSerialFifoAdd (
|
|
IN SERIAL_DEV_FIFO *Fifo,
|
|
IN UINT8 Data
|
|
)
|
|
|
|
{
|
|
//
|
|
// if FIFO full can not add data
|
|
//
|
|
if (IsaSerialFifoFull (Fifo)) {
|
|
return EFI_OUT_OF_RESOURCES;
|
|
}
|
|
//
|
|
// FIFO is not full can add data
|
|
//
|
|
Fifo->Data[Fifo->Last] = Data;
|
|
Fifo->Surplus--;
|
|
Fifo->Last++;
|
|
if (Fifo->Last == SERIAL_MAX_BUFFER_SIZE) {
|
|
Fifo->Last = 0;
|
|
}
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Remove data from specific FIFO.
|
|
|
|
@param Fifo A pointer to the Data Structure SERIAL_DEV_FIFO
|
|
@param Data the data removed from FIFO
|
|
|
|
@retval EFI_SUCCESS Remove data from specific FIFO successfully
|
|
@retval EFI_OUT_OF_RESOURCE Failed to remove data because FIFO is empty
|
|
|
|
**/
|
|
EFI_STATUS
|
|
IsaSerialFifoRemove (
|
|
IN SERIAL_DEV_FIFO *Fifo,
|
|
OUT UINT8 *Data
|
|
)
|
|
|
|
{
|
|
//
|
|
// if FIFO is empty, no data can remove
|
|
//
|
|
if (IsaSerialFifoEmpty (Fifo)) {
|
|
return EFI_OUT_OF_RESOURCES;
|
|
}
|
|
//
|
|
// FIFO is not empty, can remove data
|
|
//
|
|
*Data = Fifo->Data[Fifo->First];
|
|
Fifo->Surplus++;
|
|
Fifo->First++;
|
|
if (Fifo->First == SERIAL_MAX_BUFFER_SIZE) {
|
|
Fifo->First = 0;
|
|
}
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Reads and writes all avaliable data.
|
|
|
|
@param SerialDevice The device to flush
|
|
|
|
@retval EFI_SUCCESS Data was read/written successfully.
|
|
@retval EFI_OUT_OF_RESOURCE Failed because software receive FIFO is full. Note, when
|
|
this happens, pending writes are not done.
|
|
|
|
**/
|
|
EFI_STATUS
|
|
IsaSerialReceiveTransmit (
|
|
IN SERIAL_DEV *SerialDevice
|
|
)
|
|
|
|
{
|
|
SERIAL_PORT_LSR Lsr;
|
|
UINT8 Data;
|
|
BOOLEAN ReceiveFifoFull;
|
|
SERIAL_PORT_MSR Msr;
|
|
SERIAL_PORT_MCR Mcr;
|
|
UINTN TimeOut;
|
|
|
|
Data = 0;
|
|
|
|
//
|
|
// Begin the read or write
|
|
//
|
|
if (SerialDevice->SoftwareLoopbackEnable) {
|
|
do {
|
|
ReceiveFifoFull = IsaSerialFifoFull (&SerialDevice->Receive);
|
|
if (!IsaSerialFifoEmpty (&SerialDevice->Transmit)) {
|
|
IsaSerialFifoRemove (&SerialDevice->Transmit, &Data);
|
|
if (ReceiveFifoFull) {
|
|
return EFI_OUT_OF_RESOURCES;
|
|
}
|
|
|
|
IsaSerialFifoAdd (&SerialDevice->Receive, Data);
|
|
}
|
|
} while (!IsaSerialFifoEmpty (&SerialDevice->Transmit));
|
|
} else {
|
|
ReceiveFifoFull = IsaSerialFifoFull (&SerialDevice->Receive);
|
|
//
|
|
// For full handshake flow control, tell the peer to send data
|
|
// if receive buffer is available.
|
|
//
|
|
if (SerialDevice->HardwareFlowControl &&
|
|
!FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake)&&
|
|
!ReceiveFifoFull
|
|
) {
|
|
Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Mcr.Bits.Rts = 1;
|
|
WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);
|
|
}
|
|
do {
|
|
Lsr.Data = READ_LSR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
|
|
//
|
|
// Flush incomming data to prevent a an overrun during a long write
|
|
//
|
|
if ((Lsr.Bits.Dr == 1) && !ReceiveFifoFull) {
|
|
ReceiveFifoFull = IsaSerialFifoFull (&SerialDevice->Receive);
|
|
if (!ReceiveFifoFull) {
|
|
if (Lsr.Bits.FIFOe == 1 || Lsr.Bits.Oe == 1 || Lsr.Bits.Pe == 1 || Lsr.Bits.Fe == 1 || Lsr.Bits.Bi == 1) {
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_ERROR_CODE,
|
|
EFI_P_EC_INPUT_ERROR | EFI_PERIPHERAL_SERIAL_PORT,
|
|
SerialDevice->DevicePath
|
|
);
|
|
if (Lsr.Bits.FIFOe == 1 || Lsr.Bits.Pe == 1|| Lsr.Bits.Fe == 1 || Lsr.Bits.Bi == 1) {
|
|
Data = READ_RBR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
Data = READ_RBR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
|
|
IsaSerialFifoAdd (&SerialDevice->Receive, Data);
|
|
|
|
//
|
|
// For full handshake flow control, if receive buffer full
|
|
// tell the peer to stop sending data.
|
|
//
|
|
if (SerialDevice->HardwareFlowControl &&
|
|
!FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake) &&
|
|
IsaSerialFifoFull (&SerialDevice->Receive)
|
|
) {
|
|
Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Mcr.Bits.Rts = 0;
|
|
WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);
|
|
}
|
|
|
|
|
|
continue;
|
|
} else {
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_PROGRESS_CODE,
|
|
EFI_P_SERIAL_PORT_PC_CLEAR_BUFFER | EFI_PERIPHERAL_SERIAL_PORT,
|
|
SerialDevice->DevicePath
|
|
);
|
|
}
|
|
}
|
|
//
|
|
// Do the write
|
|
//
|
|
if (Lsr.Bits.Thre == 1 && !IsaSerialFifoEmpty (&SerialDevice->Transmit)) {
|
|
//
|
|
// Make sure the transmit data will not be missed
|
|
//
|
|
if (SerialDevice->HardwareFlowControl) {
|
|
//
|
|
// For half handshake flow control assert RTS before sending.
|
|
//
|
|
if (FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake)) {
|
|
Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Mcr.Bits.Rts= 0;
|
|
WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);
|
|
}
|
|
//
|
|
// Wait for CTS
|
|
//
|
|
TimeOut = 0;
|
|
Msr.Data = READ_MSR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
while ((Msr.Bits.Dcd == 1) && ((Msr.Bits.Cts == 0) ^ FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake))) {
|
|
gBS->Stall (TIMEOUT_STALL_INTERVAL);
|
|
TimeOut++;
|
|
if (TimeOut > 5) {
|
|
break;
|
|
}
|
|
|
|
Msr.Data = READ_MSR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
}
|
|
|
|
if ((Msr.Bits.Dcd == 0) || ((Msr.Bits.Cts == 1) ^ FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake))) {
|
|
IsaSerialFifoRemove (&SerialDevice->Transmit, &Data);
|
|
WRITE_THR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Data);
|
|
}
|
|
|
|
//
|
|
// For half handshake flow control, tell DCE we are done.
|
|
//
|
|
if (FeaturePcdGet(PcdIsaBusSerialUseHalfHandshake)) {
|
|
Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Mcr.Bits.Rts = 1;
|
|
WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);
|
|
}
|
|
} else {
|
|
IsaSerialFifoRemove (&SerialDevice->Transmit, &Data);
|
|
WRITE_THR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Data);
|
|
}
|
|
}
|
|
} while (Lsr.Bits.Thre == 1 && !IsaSerialFifoEmpty (&SerialDevice->Transmit));
|
|
}
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
//
|
|
// Interface Functions
|
|
//
|
|
/**
|
|
Reset serial device.
|
|
|
|
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
|
|
|
|
@retval EFI_SUCCESS Reset successfully
|
|
@retval EFI_DEVICE_ERROR Failed to reset
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
IsaSerialReset (
|
|
IN EFI_SERIAL_IO_PROTOCOL *This
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
SERIAL_DEV *SerialDevice;
|
|
SERIAL_PORT_LCR Lcr;
|
|
SERIAL_PORT_IER Ier;
|
|
SERIAL_PORT_MCR Mcr;
|
|
SERIAL_PORT_FCR Fcr;
|
|
EFI_TPL Tpl;
|
|
UINT32 Control;
|
|
|
|
SerialDevice = SERIAL_DEV_FROM_THIS (This);
|
|
|
|
//
|
|
// Report the status code reset the serial
|
|
//
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_PROGRESS_CODE,
|
|
EFI_P_PC_RESET | EFI_PERIPHERAL_SERIAL_PORT,
|
|
SerialDevice->DevicePath
|
|
);
|
|
|
|
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
|
|
|
|
//
|
|
// Make sure DLAB is 0.
|
|
//
|
|
Lcr.Data = READ_LCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Lcr.Bits.DLab = 0;
|
|
WRITE_LCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Lcr.Data);
|
|
|
|
//
|
|
// Turn off all interrupts
|
|
//
|
|
Ier.Data = READ_IER (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Ier.Bits.Ravie = 0;
|
|
Ier.Bits.Theie = 0;
|
|
Ier.Bits.Rie = 0;
|
|
Ier.Bits.Mie = 0;
|
|
WRITE_IER (SerialDevice->IsaIo, SerialDevice->BaseAddress, Ier.Data);
|
|
|
|
//
|
|
// Disable the FIFO.
|
|
//
|
|
Fcr.Bits.TrFIFOE = 0;
|
|
WRITE_FCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Fcr.Data);
|
|
|
|
//
|
|
// Turn off loopback and disable device interrupt.
|
|
//
|
|
Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Mcr.Bits.Out1 = 0;
|
|
Mcr.Bits.Out2 = 0;
|
|
Mcr.Bits.Lme = 0;
|
|
WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);
|
|
|
|
//
|
|
// Clear the scratch pad register
|
|
//
|
|
WRITE_SCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, 0);
|
|
|
|
//
|
|
// Go set the current attributes
|
|
//
|
|
Status = This->SetAttributes (
|
|
This,
|
|
This->Mode->BaudRate,
|
|
This->Mode->ReceiveFifoDepth,
|
|
This->Mode->Timeout,
|
|
(EFI_PARITY_TYPE) This->Mode->Parity,
|
|
(UINT8) This->Mode->DataBits,
|
|
(EFI_STOP_BITS_TYPE) This->Mode->StopBits
|
|
);
|
|
|
|
if (EFI_ERROR (Status)) {
|
|
gBS->RestoreTPL (Tpl);
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
//
|
|
// Go set the current control bits
|
|
//
|
|
Control = 0;
|
|
if (SerialDevice->HardwareFlowControl) {
|
|
Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
|
|
}
|
|
if (SerialDevice->SoftwareLoopbackEnable) {
|
|
Control |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;
|
|
}
|
|
Status = This->SetControl (
|
|
This,
|
|
Control
|
|
);
|
|
|
|
if (EFI_ERROR (Status)) {
|
|
gBS->RestoreTPL (Tpl);
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
//
|
|
// for 16550A enable FIFO, 16550 disable FIFO
|
|
//
|
|
Fcr.Bits.TrFIFOE = 1;
|
|
Fcr.Bits.ResetRF = 1;
|
|
Fcr.Bits.ResetTF = 1;
|
|
WRITE_FCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Fcr.Data);
|
|
|
|
//
|
|
// Reset the software FIFO
|
|
//
|
|
SerialDevice->Receive.First = 0;
|
|
SerialDevice->Receive.Last = 0;
|
|
SerialDevice->Receive.Surplus = SERIAL_MAX_BUFFER_SIZE;
|
|
SerialDevice->Transmit.First = 0;
|
|
SerialDevice->Transmit.Last = 0;
|
|
SerialDevice->Transmit.Surplus = SERIAL_MAX_BUFFER_SIZE;
|
|
|
|
gBS->RestoreTPL (Tpl);
|
|
|
|
//
|
|
// Device reset is complete
|
|
//
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Set new attributes to a serial device.
|
|
|
|
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
|
|
@param BaudRate The baudrate of the serial device
|
|
@param ReceiveFifoDepth The depth of receive FIFO buffer
|
|
@param Timeout The request timeout for a single char
|
|
@param Parity The type of parity used in serial device
|
|
@param DataBits Number of databits used in serial device
|
|
@param StopBits Number of stopbits used in serial device
|
|
|
|
@retval EFI_SUCCESS The new attributes were set
|
|
@retval EFI_INVALID_PARAMETERS One or more attributes have an unsupported value
|
|
@retval EFI_UNSUPPORTED Data Bits can not set to 5 or 6
|
|
@retval EFI_DEVICE_ERROR The serial device is not functioning correctly (no return)
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
IsaSerialSetAttributes (
|
|
IN EFI_SERIAL_IO_PROTOCOL *This,
|
|
IN UINT64 BaudRate,
|
|
IN UINT32 ReceiveFifoDepth,
|
|
IN UINT32 Timeout,
|
|
IN EFI_PARITY_TYPE Parity,
|
|
IN UINT8 DataBits,
|
|
IN EFI_STOP_BITS_TYPE StopBits
|
|
)
|
|
{
|
|
EFI_STATUS Status;
|
|
SERIAL_DEV *SerialDevice;
|
|
UINT32 Divisor;
|
|
UINT32 Remained;
|
|
SERIAL_PORT_LCR Lcr;
|
|
UART_DEVICE_PATH *Uart;
|
|
EFI_TPL Tpl;
|
|
|
|
SerialDevice = SERIAL_DEV_FROM_THIS (This);
|
|
|
|
//
|
|
// Check for default settings and fill in actual values.
|
|
//
|
|
if (BaudRate == 0) {
|
|
BaudRate = PcdGet64 (PcdUartDefaultBaudRate);
|
|
}
|
|
|
|
if (ReceiveFifoDepth == 0) {
|
|
ReceiveFifoDepth = SERIAL_PORT_DEFAULT_RECEIVE_FIFO_DEPTH;
|
|
}
|
|
|
|
if (Timeout == 0) {
|
|
Timeout = SERIAL_PORT_DEFAULT_TIMEOUT;
|
|
}
|
|
|
|
if (Parity == DefaultParity) {
|
|
Parity = (EFI_PARITY_TYPE)PcdGet8 (PcdUartDefaultParity);
|
|
}
|
|
|
|
if (DataBits == 0) {
|
|
DataBits = PcdGet8 (PcdUartDefaultDataBits);
|
|
}
|
|
|
|
if (StopBits == DefaultStopBits) {
|
|
StopBits = (EFI_STOP_BITS_TYPE) PcdGet8 (PcdUartDefaultStopBits);
|
|
}
|
|
//
|
|
// 5 and 6 data bits can not be verified on a 16550A UART
|
|
// Return EFI_INVALID_PARAMETER if an attempt is made to use these settings.
|
|
//
|
|
if ((DataBits == 5) || (DataBits == 6)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
//
|
|
// Make sure all parameters are valid
|
|
//
|
|
if ((BaudRate > SERIAL_PORT_MAX_BAUD_RATE) || (BaudRate < SERIAL_PORT_MIN_BAUD_RATE)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
//
|
|
// 50,75,110,134,150,300,600,1200,1800,2000,2400,3600,4800,7200,9600,19200,
|
|
// 38400,57600,115200
|
|
//
|
|
if (BaudRate < 75) {
|
|
BaudRate = 50;
|
|
} else if (BaudRate < 110) {
|
|
BaudRate = 75;
|
|
} else if (BaudRate < 134) {
|
|
BaudRate = 110;
|
|
} else if (BaudRate < 150) {
|
|
BaudRate = 134;
|
|
} else if (BaudRate < 300) {
|
|
BaudRate = 150;
|
|
} else if (BaudRate < 600) {
|
|
BaudRate = 300;
|
|
} else if (BaudRate < 1200) {
|
|
BaudRate = 600;
|
|
} else if (BaudRate < 1800) {
|
|
BaudRate = 1200;
|
|
} else if (BaudRate < 2000) {
|
|
BaudRate = 1800;
|
|
} else if (BaudRate < 2400) {
|
|
BaudRate = 2000;
|
|
} else if (BaudRate < 3600) {
|
|
BaudRate = 2400;
|
|
} else if (BaudRate < 4800) {
|
|
BaudRate = 3600;
|
|
} else if (BaudRate < 7200) {
|
|
BaudRate = 4800;
|
|
} else if (BaudRate < 9600) {
|
|
BaudRate = 7200;
|
|
} else if (BaudRate < 19200) {
|
|
BaudRate = 9600;
|
|
} else if (BaudRate < 38400) {
|
|
BaudRate = 19200;
|
|
} else if (BaudRate < 57600) {
|
|
BaudRate = 38400;
|
|
} else if (BaudRate < 115200) {
|
|
BaudRate = 57600;
|
|
} else if (BaudRate <= SERIAL_PORT_MAX_BAUD_RATE) {
|
|
BaudRate = 115200;
|
|
}
|
|
|
|
if ((ReceiveFifoDepth < 1) || (ReceiveFifoDepth > SERIAL_PORT_MAX_RECEIVE_FIFO_DEPTH)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
if ((Timeout < SERIAL_PORT_MIN_TIMEOUT) || (Timeout > SERIAL_PORT_MAX_TIMEOUT)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
if ((Parity < NoParity) || (Parity > SpaceParity)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
if ((DataBits < 5) || (DataBits > 8)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
if ((StopBits < OneStopBit) || (StopBits > TwoStopBits)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
//
|
|
// for DataBits = 6,7,8, StopBits can not set OneFiveStopBits
|
|
//
|
|
if ((DataBits >= 6) && (DataBits <= 8) && (StopBits == OneFiveStopBits)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
//
|
|
// Compute divisor use to program the baud rate using a round determination
|
|
//
|
|
Divisor = (UINT32) DivU64x32Remainder (
|
|
SERIAL_PORT_INPUT_CLOCK,
|
|
((UINT32) BaudRate * 16),
|
|
&Remained
|
|
);
|
|
if (Remained != 0) {
|
|
Divisor += 1;
|
|
}
|
|
|
|
if ((Divisor == 0) || ((Divisor & 0xffff0000) != 0)) {
|
|
return EFI_INVALID_PARAMETER;
|
|
}
|
|
|
|
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
|
|
|
|
//
|
|
// Compute the actual baud rate that the serial port will be programmed for.
|
|
//
|
|
BaudRate = SERIAL_PORT_INPUT_CLOCK / Divisor / 16;
|
|
|
|
//
|
|
// Put serial port on Divisor Latch Mode
|
|
//
|
|
Lcr.Data = READ_LCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Lcr.Bits.DLab = 1;
|
|
WRITE_LCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Lcr.Data);
|
|
|
|
//
|
|
// Write the divisor to the serial port
|
|
//
|
|
WRITE_DLL (SerialDevice->IsaIo, SerialDevice->BaseAddress, (UINT8) (Divisor & 0xff));
|
|
WRITE_DLM (SerialDevice->IsaIo, SerialDevice->BaseAddress, (UINT8) ((Divisor >> 8) & 0xff));
|
|
|
|
//
|
|
// Put serial port back in normal mode and set remaining attributes.
|
|
//
|
|
Lcr.Bits.DLab = 0;
|
|
|
|
switch (Parity) {
|
|
case NoParity:
|
|
Lcr.Bits.ParEn = 0;
|
|
Lcr.Bits.EvenPar = 0;
|
|
Lcr.Bits.SticPar = 0;
|
|
break;
|
|
|
|
case EvenParity:
|
|
Lcr.Bits.ParEn = 1;
|
|
Lcr.Bits.EvenPar = 1;
|
|
Lcr.Bits.SticPar = 0;
|
|
break;
|
|
|
|
case OddParity:
|
|
Lcr.Bits.ParEn = 1;
|
|
Lcr.Bits.EvenPar = 0;
|
|
Lcr.Bits.SticPar = 0;
|
|
break;
|
|
|
|
case SpaceParity:
|
|
Lcr.Bits.ParEn = 1;
|
|
Lcr.Bits.EvenPar = 1;
|
|
Lcr.Bits.SticPar = 1;
|
|
break;
|
|
|
|
case MarkParity:
|
|
Lcr.Bits.ParEn = 1;
|
|
Lcr.Bits.EvenPar = 0;
|
|
Lcr.Bits.SticPar = 1;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (StopBits) {
|
|
case OneStopBit:
|
|
Lcr.Bits.StopB = 0;
|
|
break;
|
|
|
|
case OneFiveStopBits:
|
|
case TwoStopBits:
|
|
Lcr.Bits.StopB = 1;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
//
|
|
// DataBits
|
|
//
|
|
Lcr.Bits.SerialDB = (UINT8) ((DataBits - 5) & 0x03);
|
|
WRITE_LCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Lcr.Data);
|
|
|
|
//
|
|
// Set the Serial I/O mode
|
|
//
|
|
This->Mode->BaudRate = BaudRate;
|
|
This->Mode->ReceiveFifoDepth = ReceiveFifoDepth;
|
|
This->Mode->Timeout = Timeout;
|
|
This->Mode->Parity = Parity;
|
|
This->Mode->DataBits = DataBits;
|
|
This->Mode->StopBits = StopBits;
|
|
|
|
//
|
|
// See if Device Path Node has actually changed
|
|
//
|
|
if (SerialDevice->UartDevicePath.BaudRate == BaudRate &&
|
|
SerialDevice->UartDevicePath.DataBits == DataBits &&
|
|
SerialDevice->UartDevicePath.Parity == Parity &&
|
|
SerialDevice->UartDevicePath.StopBits == StopBits
|
|
) {
|
|
gBS->RestoreTPL (Tpl);
|
|
return EFI_SUCCESS;
|
|
}
|
|
//
|
|
// Update the device path
|
|
//
|
|
SerialDevice->UartDevicePath.BaudRate = BaudRate;
|
|
SerialDevice->UartDevicePath.DataBits = DataBits;
|
|
SerialDevice->UartDevicePath.Parity = (UINT8) Parity;
|
|
SerialDevice->UartDevicePath.StopBits = (UINT8) StopBits;
|
|
|
|
Status = EFI_SUCCESS;
|
|
if (SerialDevice->Handle != NULL) {
|
|
Uart = (UART_DEVICE_PATH *) (
|
|
(UINTN) SerialDevice->DevicePath
|
|
+ GetDevicePathSize (SerialDevice->ParentDevicePath)
|
|
- END_DEVICE_PATH_LENGTH
|
|
);
|
|
CopyMem (Uart, &SerialDevice->UartDevicePath, sizeof (UART_DEVICE_PATH));
|
|
Status = gBS->ReinstallProtocolInterface (
|
|
SerialDevice->Handle,
|
|
&gEfiDevicePathProtocolGuid,
|
|
SerialDevice->DevicePath,
|
|
SerialDevice->DevicePath
|
|
);
|
|
}
|
|
|
|
gBS->RestoreTPL (Tpl);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Set Control Bits.
|
|
|
|
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
|
|
@param Control Control bits that can be settable
|
|
|
|
@retval EFI_SUCCESS New Control bits were set successfully
|
|
@retval EFI_UNSUPPORTED The Control bits wanted to set are not supported
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
IsaSerialSetControl (
|
|
IN EFI_SERIAL_IO_PROTOCOL *This,
|
|
IN UINT32 Control
|
|
)
|
|
{
|
|
SERIAL_DEV *SerialDevice;
|
|
SERIAL_PORT_MCR Mcr;
|
|
EFI_TPL Tpl;
|
|
UART_FLOW_CONTROL_DEVICE_PATH *FlowControl;
|
|
EFI_STATUS Status;
|
|
|
|
//
|
|
// The control bits that can be set are :
|
|
// EFI_SERIAL_DATA_TERMINAL_READY: 0x0001 // WO
|
|
// EFI_SERIAL_REQUEST_TO_SEND: 0x0002 // WO
|
|
// EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE: 0x1000 // RW
|
|
// EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE: 0x2000 // RW
|
|
// EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE: 0x4000 // RW
|
|
//
|
|
SerialDevice = SERIAL_DEV_FROM_THIS (This);
|
|
|
|
//
|
|
// first determine the parameter is invalid
|
|
//
|
|
if ((Control & (~(EFI_SERIAL_REQUEST_TO_SEND | EFI_SERIAL_DATA_TERMINAL_READY |
|
|
EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE | EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE |
|
|
EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE))) != 0) {
|
|
return EFI_UNSUPPORTED;
|
|
}
|
|
|
|
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
|
|
|
|
Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
Mcr.Bits.DtrC = 0;
|
|
Mcr.Bits.Rts = 0;
|
|
Mcr.Bits.Lme = 0;
|
|
SerialDevice->SoftwareLoopbackEnable = FALSE;
|
|
SerialDevice->HardwareFlowControl = FALSE;
|
|
|
|
if ((Control & EFI_SERIAL_DATA_TERMINAL_READY) == EFI_SERIAL_DATA_TERMINAL_READY) {
|
|
Mcr.Bits.DtrC = 1;
|
|
}
|
|
|
|
if ((Control & EFI_SERIAL_REQUEST_TO_SEND) == EFI_SERIAL_REQUEST_TO_SEND) {
|
|
Mcr.Bits.Rts = 1;
|
|
}
|
|
|
|
if ((Control & EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) == EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE) {
|
|
Mcr.Bits.Lme = 1;
|
|
}
|
|
|
|
if ((Control & EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) == EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE) {
|
|
SerialDevice->HardwareFlowControl = TRUE;
|
|
}
|
|
|
|
WRITE_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Mcr.Data);
|
|
|
|
if ((Control & EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE) == EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE) {
|
|
SerialDevice->SoftwareLoopbackEnable = TRUE;
|
|
}
|
|
|
|
Status = EFI_SUCCESS;
|
|
if (SerialDevice->Handle != NULL) {
|
|
FlowControl = (UART_FLOW_CONTROL_DEVICE_PATH *) (
|
|
(UINTN) SerialDevice->DevicePath
|
|
+ GetDevicePathSize (SerialDevice->ParentDevicePath)
|
|
- END_DEVICE_PATH_LENGTH
|
|
+ sizeof (UART_DEVICE_PATH)
|
|
);
|
|
if (IsUartFlowControlNode (FlowControl) &&
|
|
((ReadUnaligned32 (&FlowControl->FlowControlMap) == UART_FLOW_CONTROL_HARDWARE) ^ SerialDevice->HardwareFlowControl)) {
|
|
//
|
|
// Flow Control setting is changed, need to reinstall device path protocol
|
|
//
|
|
WriteUnaligned32 (&FlowControl->FlowControlMap, SerialDevice->HardwareFlowControl ? UART_FLOW_CONTROL_HARDWARE : 0);
|
|
Status = gBS->ReinstallProtocolInterface (
|
|
SerialDevice->Handle,
|
|
&gEfiDevicePathProtocolGuid,
|
|
SerialDevice->DevicePath,
|
|
SerialDevice->DevicePath
|
|
);
|
|
}
|
|
}
|
|
|
|
gBS->RestoreTPL (Tpl);
|
|
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Get ControlBits.
|
|
|
|
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
|
|
@param Control Control signals of the serial device
|
|
|
|
@retval EFI_SUCCESS Get Control signals successfully
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
IsaSerialGetControl (
|
|
IN EFI_SERIAL_IO_PROTOCOL *This,
|
|
OUT UINT32 *Control
|
|
)
|
|
{
|
|
SERIAL_DEV *SerialDevice;
|
|
SERIAL_PORT_MSR Msr;
|
|
SERIAL_PORT_MCR Mcr;
|
|
EFI_TPL Tpl;
|
|
|
|
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
|
|
|
|
SerialDevice = SERIAL_DEV_FROM_THIS (This);
|
|
|
|
*Control = 0;
|
|
|
|
//
|
|
// Read the Modem Status Register
|
|
//
|
|
Msr.Data = READ_MSR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
|
|
if (Msr.Bits.Cts == 1) {
|
|
*Control |= EFI_SERIAL_CLEAR_TO_SEND;
|
|
}
|
|
|
|
if (Msr.Bits.Dsr == 1) {
|
|
*Control |= EFI_SERIAL_DATA_SET_READY;
|
|
}
|
|
|
|
if (Msr.Bits.Ri == 1) {
|
|
*Control |= EFI_SERIAL_RING_INDICATE;
|
|
}
|
|
|
|
if (Msr.Bits.Dcd == 1) {
|
|
*Control |= EFI_SERIAL_CARRIER_DETECT;
|
|
}
|
|
//
|
|
// Read the Modem Control Register
|
|
//
|
|
Mcr.Data = READ_MCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
|
|
if (Mcr.Bits.DtrC == 1) {
|
|
*Control |= EFI_SERIAL_DATA_TERMINAL_READY;
|
|
}
|
|
|
|
if (Mcr.Bits.Rts == 1) {
|
|
*Control |= EFI_SERIAL_REQUEST_TO_SEND;
|
|
}
|
|
|
|
if (Mcr.Bits.Lme == 1) {
|
|
*Control |= EFI_SERIAL_HARDWARE_LOOPBACK_ENABLE;
|
|
}
|
|
|
|
if (SerialDevice->HardwareFlowControl) {
|
|
*Control |= EFI_SERIAL_HARDWARE_FLOW_CONTROL_ENABLE;
|
|
}
|
|
//
|
|
// See if the Transmit FIFO is empty
|
|
//
|
|
IsaSerialReceiveTransmit (SerialDevice);
|
|
|
|
if (IsaSerialFifoEmpty (&SerialDevice->Transmit)) {
|
|
*Control |= EFI_SERIAL_OUTPUT_BUFFER_EMPTY;
|
|
}
|
|
//
|
|
// See if the Receive FIFO is empty.
|
|
//
|
|
IsaSerialReceiveTransmit (SerialDevice);
|
|
|
|
if (IsaSerialFifoEmpty (&SerialDevice->Receive)) {
|
|
*Control |= EFI_SERIAL_INPUT_BUFFER_EMPTY;
|
|
}
|
|
|
|
if (SerialDevice->SoftwareLoopbackEnable) {
|
|
*Control |= EFI_SERIAL_SOFTWARE_LOOPBACK_ENABLE;
|
|
}
|
|
|
|
gBS->RestoreTPL (Tpl);
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Write the specified number of bytes to serial device.
|
|
|
|
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
|
|
@param BufferSize On input the size of Buffer, on output the amount of
|
|
data actually written
|
|
@param Buffer The buffer of data to write
|
|
|
|
@retval EFI_SUCCESS The data were written successfully
|
|
@retval EFI_DEVICE_ERROR The device reported an error
|
|
@retval EFI_TIMEOUT The write operation was stopped due to timeout
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
IsaSerialWrite (
|
|
IN EFI_SERIAL_IO_PROTOCOL *This,
|
|
IN OUT UINTN *BufferSize,
|
|
IN VOID *Buffer
|
|
)
|
|
{
|
|
SERIAL_DEV *SerialDevice;
|
|
UINT8 *CharBuffer;
|
|
UINT32 Index;
|
|
UINTN Elapsed;
|
|
UINTN ActualWrite;
|
|
EFI_TPL Tpl;
|
|
|
|
SerialDevice = SERIAL_DEV_FROM_THIS (This);
|
|
Elapsed = 0;
|
|
ActualWrite = 0;
|
|
|
|
if (*BufferSize == 0) {
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
if (Buffer == NULL) {
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_ERROR_CODE,
|
|
EFI_P_EC_OUTPUT_ERROR | EFI_PERIPHERAL_SERIAL_PORT,
|
|
SerialDevice->DevicePath
|
|
);
|
|
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
|
|
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
|
|
|
|
CharBuffer = (UINT8 *) Buffer;
|
|
|
|
for (Index = 0; Index < *BufferSize; Index++) {
|
|
IsaSerialFifoAdd (&SerialDevice->Transmit, CharBuffer[Index]);
|
|
|
|
while (IsaSerialReceiveTransmit (SerialDevice) != EFI_SUCCESS || !IsaSerialFifoEmpty (&SerialDevice->Transmit)) {
|
|
//
|
|
// Unsuccessful write so check if timeout has expired, if not,
|
|
// stall for a bit, increment time elapsed, and try again
|
|
//
|
|
if (Elapsed >= This->Mode->Timeout) {
|
|
*BufferSize = ActualWrite;
|
|
gBS->RestoreTPL (Tpl);
|
|
return EFI_TIMEOUT;
|
|
}
|
|
|
|
gBS->Stall (TIMEOUT_STALL_INTERVAL);
|
|
|
|
Elapsed += TIMEOUT_STALL_INTERVAL;
|
|
}
|
|
|
|
ActualWrite++;
|
|
//
|
|
// Successful write so reset timeout
|
|
//
|
|
Elapsed = 0;
|
|
}
|
|
|
|
gBS->RestoreTPL (Tpl);
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Read the specified number of bytes from serial device.
|
|
|
|
@param This Pointer to EFI_SERIAL_IO_PROTOCOL
|
|
@param BufferSize On input the size of Buffer, on output the amount of
|
|
data returned in buffer
|
|
@param Buffer The buffer to return the data into
|
|
|
|
@retval EFI_SUCCESS The data were read successfully
|
|
@retval EFI_DEVICE_ERROR The device reported an error
|
|
@retval EFI_TIMEOUT The read operation was stopped due to timeout
|
|
|
|
**/
|
|
EFI_STATUS
|
|
EFIAPI
|
|
IsaSerialRead (
|
|
IN EFI_SERIAL_IO_PROTOCOL *This,
|
|
IN OUT UINTN *BufferSize,
|
|
OUT VOID *Buffer
|
|
)
|
|
{
|
|
SERIAL_DEV *SerialDevice;
|
|
UINT32 Index;
|
|
UINT8 *CharBuffer;
|
|
UINTN Elapsed;
|
|
EFI_STATUS Status;
|
|
EFI_TPL Tpl;
|
|
|
|
SerialDevice = SERIAL_DEV_FROM_THIS (This);
|
|
Elapsed = 0;
|
|
|
|
if (*BufferSize == 0) {
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
if (Buffer == NULL) {
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
|
|
Tpl = gBS->RaiseTPL (TPL_NOTIFY);
|
|
|
|
Status = IsaSerialReceiveTransmit (SerialDevice);
|
|
|
|
if (EFI_ERROR (Status)) {
|
|
*BufferSize = 0;
|
|
|
|
REPORT_STATUS_CODE_WITH_DEVICE_PATH (
|
|
EFI_ERROR_CODE,
|
|
EFI_P_EC_INPUT_ERROR | EFI_PERIPHERAL_SERIAL_PORT,
|
|
SerialDevice->DevicePath
|
|
);
|
|
|
|
gBS->RestoreTPL (Tpl);
|
|
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
|
|
CharBuffer = (UINT8 *) Buffer;
|
|
for (Index = 0; Index < *BufferSize; Index++) {
|
|
while (IsaSerialFifoRemove (&SerialDevice->Receive, &(CharBuffer[Index])) != EFI_SUCCESS) {
|
|
//
|
|
// Unsuccessful read so check if timeout has expired, if not,
|
|
// stall for a bit, increment time elapsed, and try again
|
|
// Need this time out to get conspliter to work.
|
|
//
|
|
if (Elapsed >= This->Mode->Timeout) {
|
|
*BufferSize = Index;
|
|
gBS->RestoreTPL (Tpl);
|
|
return EFI_TIMEOUT;
|
|
}
|
|
|
|
gBS->Stall (TIMEOUT_STALL_INTERVAL);
|
|
Elapsed += TIMEOUT_STALL_INTERVAL;
|
|
|
|
Status = IsaSerialReceiveTransmit (SerialDevice);
|
|
if (Status == EFI_DEVICE_ERROR) {
|
|
*BufferSize = Index;
|
|
gBS->RestoreTPL (Tpl);
|
|
return EFI_DEVICE_ERROR;
|
|
}
|
|
}
|
|
//
|
|
// Successful read so reset timeout
|
|
//
|
|
Elapsed = 0;
|
|
}
|
|
|
|
IsaSerialReceiveTransmit (SerialDevice);
|
|
|
|
gBS->RestoreTPL (Tpl);
|
|
|
|
return EFI_SUCCESS;
|
|
}
|
|
|
|
/**
|
|
Use scratchpad register to test if this serial port is present.
|
|
|
|
@param SerialDevice Pointer to serial device structure
|
|
|
|
@return if this serial port is present
|
|
**/
|
|
BOOLEAN
|
|
IsaSerialPortPresent (
|
|
IN SERIAL_DEV *SerialDevice
|
|
)
|
|
|
|
{
|
|
UINT8 Temp;
|
|
BOOLEAN Status;
|
|
|
|
Status = TRUE;
|
|
|
|
//
|
|
// Save SCR reg
|
|
//
|
|
Temp = READ_SCR (SerialDevice->IsaIo, SerialDevice->BaseAddress);
|
|
WRITE_SCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, 0xAA);
|
|
|
|
if (READ_SCR (SerialDevice->IsaIo, SerialDevice->BaseAddress) != 0xAA) {
|
|
Status = FALSE;
|
|
}
|
|
|
|
WRITE_SCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, 0x55);
|
|
|
|
if (READ_SCR (SerialDevice->IsaIo, SerialDevice->BaseAddress) != 0x55) {
|
|
Status = FALSE;
|
|
}
|
|
//
|
|
// Restore SCR
|
|
//
|
|
WRITE_SCR (SerialDevice->IsaIo, SerialDevice->BaseAddress, Temp);
|
|
return Status;
|
|
}
|
|
|
|
/**
|
|
Use IsaIo protocol to read serial port.
|
|
|
|
@param IsaIo Pointer to EFI_ISA_IO_PROTOCOL instance
|
|
@param BaseAddress Serial port register group base address
|
|
@param Offset Offset in register group
|
|
|
|
@return Data read from serial port
|
|
|
|
**/
|
|
UINT8
|
|
IsaSerialReadPort (
|
|
IN EFI_ISA_IO_PROTOCOL *IsaIo,
|
|
IN UINT16 BaseAddress,
|
|
IN UINT32 Offset
|
|
)
|
|
{
|
|
UINT8 Data;
|
|
|
|
//
|
|
// Use IsaIo to access IO
|
|
//
|
|
IsaIo->Io.Read (
|
|
IsaIo,
|
|
EfiIsaIoWidthUint8,
|
|
BaseAddress + Offset,
|
|
1,
|
|
&Data
|
|
);
|
|
return Data;
|
|
}
|
|
|
|
/**
|
|
Use IsaIo protocol to write serial port.
|
|
|
|
@param IsaIo Pointer to EFI_ISA_IO_PROTOCOL instance
|
|
@param BaseAddress Serial port register group base address
|
|
@param Offset Offset in register group
|
|
@param Data data which is to be written to some serial port register
|
|
|
|
**/
|
|
VOID
|
|
IsaSerialWritePort (
|
|
IN EFI_ISA_IO_PROTOCOL *IsaIo,
|
|
IN UINT16 BaseAddress,
|
|
IN UINT32 Offset,
|
|
IN UINT8 Data
|
|
)
|
|
{
|
|
//
|
|
// Use IsaIo to access IO
|
|
//
|
|
IsaIo->Io.Write (
|
|
IsaIo,
|
|
EfiIsaIoWidthUint8,
|
|
BaseAddress + Offset,
|
|
1,
|
|
&Data
|
|
);
|
|
}
|
|
|