audk/MdeModulePkg/Universal/Network/SnpDxe/Start.c

/** @file
    Implementation of starting a network adapter.
 
Copyright (c) 2004 - 2007, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials are licensed 
and made available under the terms and conditions of the BSD License which 
accompanies this distribution. The full text of the license may be found at 
http://opensource.org/licenses/bsd-license.php 

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include "Snp.h"


/**
  Call UNDI to start the interface and changes the snp state.

  @param  Snp                    pointer to snp driver structure.

  @retval EFI_SUCCESS            UNDI is started successfully.
  @retval EFI_DEVICE_ERROR       UNDI could not be started.
  
**/
EFI_STATUS
PxeStart (
  IN SNP_DRIVER *Snp
  )
{
  PXE_CPB_START_31  *Cpb31;

  Cpb31  = Snp->Cpb;
  //
  // Initialize UNDI Start CDB for H/W UNDI
  //
  Snp->Cdb.OpCode     = PXE_OPCODE_START;
  Snp->Cdb.OpFlags    = PXE_OPFLAGS_NOT_USED;
  Snp->Cdb.CPBsize    = PXE_CPBSIZE_NOT_USED;
  Snp->Cdb.DBsize     = PXE_DBSIZE_NOT_USED;
  Snp->Cdb.CPBaddr    = PXE_CPBADDR_NOT_USED;
  Snp->Cdb.DBaddr     = PXE_DBADDR_NOT_USED;
  Snp->Cdb.StatCode   = PXE_STATCODE_INITIALIZE;
  Snp->Cdb.StatFlags  = PXE_STATFLAGS_INITIALIZE;
  Snp->Cdb.IFnum      = Snp->IfNum;
  Snp->Cdb.Control    = PXE_CONTROL_LAST_CDB_IN_LIST;

  //
  // Make changes to H/W UNDI Start CDB if this is
  // a S/W UNDI.
  //
  if (Snp->IsSwUndi) {
    Snp->Cdb.CPBsize  = (UINT16) sizeof (PXE_CPB_START_31);
    Snp->Cdb.CPBaddr  = (UINT64)(UINTN) Cpb31;

    Cpb31->Delay     = (UINT64)(UINTN) &SnpUndi32CallbackDelay;
    Cpb31->Block     = (UINT64)(UINTN) &SnpUndi32CallbackBlock;

    //
    // Virtual == Physical.  This can be set to zero.
    //
    Cpb31->Virt2Phys = (UINT64)(UINTN) 0;
    Cpb31->Mem_IO    = (UINT64)(UINTN) &SnpUndi32CallbackMemio;

    Cpb31->Map_Mem   = (UINT64)(UINTN) &SnpUndi32CallbackMap;
    Cpb31->UnMap_Mem = (UINT64)(UINTN) &SnpUndi32CallbackUnmap;
    Cpb31->Sync_Mem  = (UINT64)(UINTN) &SnpUndi32CallbackSync;

    Cpb31->Unique_ID = (UINT64)(UINTN) Snp;
  }
  //
  // Issue UNDI command and check result.
  //
  DEBUG ((EFI_D_NET, "\nsnp->undi.start()  "));

  (*Snp->IssueUndi32Command) ((UINT64)(UINTN) &Snp->Cdb);

  if (Snp->Cdb.StatCode != PXE_STATCODE_SUCCESS) {
    //
    // UNDI could not be started. Return UNDI error.
    //
    DEBUG (
      (EFI_D_ERROR,
      "\nsnp->undi.start()  %xh:%xh\n",
      Snp->Cdb.StatCode,
      Snp->Cdb.StatFlags)
      );

    return EFI_DEVICE_ERROR;
  }
  //
  // Set simple network state to Started and return success.
  //
  Snp->Mode.State = EfiSimpleNetworkStarted;

  return EFI_SUCCESS;
}


/**
  Change the state of a network interface from "stopped" to "started."
  
  This function starts a network interface. If the network interface successfully
  starts, then EFI_SUCCESS will be returned.

  @param  This                   A pointer to the EFI_SIMPLE_NETWORK_PROTOCOL instance.

  @retval EFI_SUCCESS            The network interface was started.
  @retval EFI_ALREADY_STARTED    The network interface is already in the started state.
  @retval EFI_INVALID_PARAMETER  This parameter was NULL or did not point to a valid 
                                 EFI_SIMPLE_NETWORK_PROTOCOL structure.
  @retval EFI_DEVICE_ERROR       The command could not be sent to the network interface.
  @retval EFI_UNSUPPORTED        This function is not supported by the network interface.

**/
EFI_STATUS
EFIAPI
SnpUndi32Start (
  IN EFI_SIMPLE_NETWORK_PROTOCOL *This
  )
{
  SNP_DRIVER  *Snp;
  EFI_STATUS  Status;
  UINTN       Index;
  EFI_TPL     OldTpl;

  if (This == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  Snp = EFI_SIMPLE_NETWORK_DEV_FROM_THIS (This);

  OldTpl = gBS->RaiseTPL (TPL_CALLBACK);

  switch (Snp->Mode.State) {
  case EfiSimpleNetworkStopped:
    break;

  case EfiSimpleNetworkStarted:
  case EfiSimpleNetworkInitialized:
    Status = EFI_ALREADY_STARTED;
    goto ON_EXIT;

  default:
    Status = EFI_DEVICE_ERROR;
    goto ON_EXIT;
  }

  Status = PxeStart (Snp);
  if (EFI_ERROR (Status)) {
    goto ON_EXIT;
  }
  //
  // clear the map_list in SNP structure
  //
  for (Index = 0; Index < MAX_MAP_LENGTH; Index++) {
    Snp->MapList[Index].VirtualAddress = 0;
    Snp->MapList[Index].MapCookie      = 0;
  }

  Snp->Mode.MCastFilterCount = 0;

ON_EXIT:
  gBS->RestoreTPL (OldTpl);

  return Status;
}