audk/EdkModulePkg/Library/EdkGraphicsLib/Graphics.c

866 lines
24 KiB
C

/*++
Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
Module Name:
Graphics.c
Abstract:
Support for Basic Graphics operations.
BugBug: Currently *.BMP files are supported. This will be replaced
when Tiano graphics format is supported.
--*/
EFI_STATUS
GetGraphicsBitMapFromFV (
IN EFI_GUID *FileNameGuid,
OUT VOID **Image,
OUT UINTN *ImageSize
)
/*++
Routine Description:
Return the graphics image file named FileNameGuid into Image and return it's
size in ImageSize. All Firmware Volumes (FV) in the system are searched for the
file name.
Arguments:
FileNameGuid - File Name of graphics file in the FV(s).
Image - Pointer to pointer to return graphics image. If NULL, a
buffer will be allocated.
ImageSize - Size of the graphics Image in bytes. Zero if no image found.
Returns:
EFI_SUCCESS - Image and ImageSize are valid.
EFI_BUFFER_TOO_SMALL - Image not big enough. ImageSize has required size
EFI_NOT_FOUND - FileNameGuid not found
--*/
{
EFI_STATUS Status;
UINTN FvProtocolCount;
EFI_HANDLE *FvHandles;
EFI_FIRMWARE_VOLUME_PROTOCOL *Fv;
UINTN Index;
UINT32 AuthenticationStatus;
Status = gBS->LocateHandleBuffer (
ByProtocol,
&gEfiFirmwareVolumeProtocolGuid,
NULL,
&FvProtocolCount,
&FvHandles
);
if (EFI_ERROR (Status)) {
return EFI_NOT_FOUND;
}
for (Index = 0; Index < FvProtocolCount; Index++) {
Status = gBS->HandleProtocol (
FvHandles[Index],
&gEfiFirmwareVolumeProtocolGuid,
(VOID **) &Fv
);
//
// Assuming Image and ImageSize are correct on input.
//
Status = Fv->ReadSection (
Fv,
FileNameGuid,
EFI_SECTION_RAW,
0,
Image,
ImageSize,
&AuthenticationStatus
);
if (!EFI_ERROR (Status)) {
return EFI_SUCCESS;
} else if (Status == EFI_BUFFER_TOO_SMALL) {
//
// ImageSize updated to needed size so return
//
return EFI_BUFFER_TOO_SMALL;
}
}
return EFI_NOT_FOUND;
}
STATIC
EFI_STATUS
ConvertBmpToGopBlt (
IN VOID *BmpImage,
IN UINTN BmpImageSize,
IN OUT VOID **GopBlt,
IN OUT UINTN *GopBltSize,
OUT UINTN *PixelHeight,
OUT UINTN *PixelWidth
)
/*++
Routine Description:
Convert a *.BMP graphics image to a UGA blt buffer. If a NULL UgaBlt buffer
is passed in a UgaBlt buffer will be allocated by this routine. If a UgaBlt
buffer is passed in it will be used if it is big enough.
Arguments:
BmpImage - Pointer to BMP file
BmpImageSize - Number of bytes in BmpImage
UgaBlt - Buffer containing UGA version of BmpImage.
UgaBltSize - Size of UgaBlt in bytes.
PixelHeight - Height of UgaBlt/BmpImage in pixels
PixelWidth - Width of UgaBlt/BmpImage in pixels
Returns:
EFI_SUCCESS - UgaBlt and UgaBltSize are returned.
EFI_UNSUPPORTED - BmpImage is not a valid *.BMP image
EFI_BUFFER_TOO_SMALL - The passed in UgaBlt buffer is not big enough.
UgaBltSize will contain the required size.
EFI_OUT_OF_RESOURCES - No enough buffer to allocate
--*/
{
UINT8 *Image;
UINT8 *ImageHeader;
BMP_IMAGE_HEADER *BmpHeader;
BMP_COLOR_MAP *BmpColorMap;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt;
UINTN BltBufferSize;
UINTN Index;
UINTN Height;
UINTN Width;
UINTN ImageIndex;
BOOLEAN IsAllocated;
BmpHeader = (BMP_IMAGE_HEADER *) BmpImage;
if (BmpHeader->CharB != 'B' || BmpHeader->CharM != 'M') {
return EFI_UNSUPPORTED;
}
if (BmpHeader->CompressionType != 0) {
return EFI_UNSUPPORTED;
}
//
// Calculate Color Map offset in the image.
//
Image = BmpImage;
BmpColorMap = (BMP_COLOR_MAP *) (Image + sizeof (BMP_IMAGE_HEADER));
//
// Calculate graphics image data address in the image
//
Image = ((UINT8 *) BmpImage) + BmpHeader->ImageOffset;
ImageHeader = Image;
BltBufferSize = BmpHeader->PixelWidth * BmpHeader->PixelHeight * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL);
IsAllocated = FALSE;
if (*GopBlt == NULL) {
*GopBltSize = BltBufferSize;
*GopBlt = AllocatePool (*GopBltSize);
IsAllocated = TRUE;
if (*GopBlt == NULL) {
return EFI_OUT_OF_RESOURCES;
}
} else {
if (*GopBltSize < BltBufferSize) {
*GopBltSize = BltBufferSize;
return EFI_BUFFER_TOO_SMALL;
}
}
*PixelWidth = BmpHeader->PixelWidth;
*PixelHeight = BmpHeader->PixelHeight;
//
// Convert image from BMP to Blt buffer format
//
BltBuffer = *GopBlt;
for (Height = 0; Height < BmpHeader->PixelHeight; Height++) {
Blt = &BltBuffer[(BmpHeader->PixelHeight - Height - 1) * BmpHeader->PixelWidth];
for (Width = 0; Width < BmpHeader->PixelWidth; Width++, Image++, Blt++) {
switch (BmpHeader->BitPerPixel) {
case 1:
//
// Convert 1bit BMP to 24-bit color
//
for (Index = 0; Index < 8 && Width < BmpHeader->PixelWidth; Index++) {
Blt->Red = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Red;
Blt->Green = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Green;
Blt->Blue = BmpColorMap[((*Image) >> (7 - Index)) & 0x1].Blue;
Blt++;
Width++;
}
Blt --;
Width --;
break;
case 4:
//
// Convert BMP Palette to 24-bit color
//
Index = (*Image) >> 4;
Blt->Red = BmpColorMap[Index].Red;
Blt->Green = BmpColorMap[Index].Green;
Blt->Blue = BmpColorMap[Index].Blue;
if (Width < (BmpHeader->PixelWidth - 1)) {
Blt++;
Width++;
Index = (*Image) & 0x0f;
Blt->Red = BmpColorMap[Index].Red;
Blt->Green = BmpColorMap[Index].Green;
Blt->Blue = BmpColorMap[Index].Blue;
}
break;
case 8:
//
// Convert BMP Palette to 24-bit color
//
Blt->Red = BmpColorMap[*Image].Red;
Blt->Green = BmpColorMap[*Image].Green;
Blt->Blue = BmpColorMap[*Image].Blue;
break;
case 24:
Blt->Blue = *Image++;
Blt->Green = *Image++;
Blt->Red = *Image;
break;
default:
if (IsAllocated) {
gBS->FreePool (*GopBlt);
*GopBlt = NULL;
}
return EFI_UNSUPPORTED;
break;
};
}
ImageIndex = (UINTN) (Image - ImageHeader);
if ((ImageIndex % 4) != 0) {
//
// Bmp Image starts each row on a 32-bit boundary!
//
Image = Image + (4 - (ImageIndex % 4));
}
}
return EFI_SUCCESS;
}
EFI_STATUS
LockKeyboards (
IN CHAR16 *Password
)
/*++
Routine Description:
Use Console Control Protocol to lock the Console In Spliter virtual handle.
This is the ConInHandle and ConIn handle in the EFI system table. All key
presses will be ignored until the Password is typed in. The only way to
disable the password is to type it in to a ConIn device.
Arguments:
Password - Password used to lock ConIn device
Returns:
EFI_SUCCESS - ConsoleControl has been flipped to graphics and logo
displayed.
EFI_UNSUPPORTED - Logo not found
--*/
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID **) &ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
Status = ConsoleControl->LockStdIn (ConsoleControl, Password);
return Status;
}
EFI_STATUS
EnableQuietBoot (
IN EFI_GUID *LogoFile
)
/*++
Routine Description:
Use Console Control to turn off UGA based Simple Text Out consoles from going
to the UGA device. Put up LogoFile on every UGA device that is a console
Arguments:
LogoFile - File name of logo to display on the center of the screen.
Returns:
EFI_SUCCESS - ConsoleControl has been flipped to graphics and logo
displayed.
EFI_UNSUPPORTED - Logo not found
--*/
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
EFI_OEM_BADGING_PROTOCOL *Badging;
UINT32 SizeOfX;
UINT32 SizeOfY;
INTN DestX;
INTN DestY;
UINT8 *ImageData;
UINTN ImageSize;
UINTN BltSize;
UINT32 Instance;
EFI_BADGING_FORMAT Format;
EFI_BADGING_DISPLAY_ATTRIBUTE Attribute;
UINTN CoordinateX;
UINTN CoordinateY;
UINTN Height;
UINTN Width;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Blt;
EFI_UGA_DRAW_PROTOCOL *UgaDraw;
UINT32 ColorDepth;
UINT32 RefreshRate;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID **) &ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
UgaDraw = NULL;
//
// Try to open GOP first
//
Status = gBS->HandleProtocol (gST->ConsoleOutHandle, &gEfiGraphicsOutputProtocolGuid, (VOID **) &GraphicsOutput);
if (EFI_ERROR(Status)) {
GraphicsOutput = NULL;
//
// Open GOP failed, try to open UGA
//
Status = gBS->HandleProtocol (gST->ConsoleOutHandle, &gEfiUgaDrawProtocolGuid, (VOID **) &UgaDraw);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
}
Badging = NULL;
Status = gBS->LocateProtocol (&gEfiOEMBadgingProtocolGuid, NULL, (VOID **) &Badging);
ConsoleControl->SetMode (ConsoleControl, EfiConsoleControlScreenGraphics);
if (GraphicsOutput != NULL) {
SizeOfX = GraphicsOutput->Mode->Info->HorizontalResolution;
SizeOfY = GraphicsOutput->Mode->Info->VerticalResolution;
} else {
Status = UgaDraw->GetMode (UgaDraw, &SizeOfX, &SizeOfY, &ColorDepth, &RefreshRate);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
}
Instance = 0;
while (1) {
ImageData = NULL;
ImageSize = 0;
if (Badging != NULL) {
Status = Badging->GetImage (
Badging,
&Instance,
&Format,
&ImageData,
&ImageSize,
&Attribute,
&CoordinateX,
&CoordinateY
);
if (EFI_ERROR (Status)) {
return Status;
}
//
// Currently only support BMP format
//
if (Format != EfiBadgingFormatBMP) {
gBS->FreePool (ImageData);
continue;
}
} else {
Status = GetGraphicsBitMapFromFV (LogoFile, (VOID **) &ImageData, &ImageSize);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
CoordinateX = 0;
CoordinateY = 0;
Attribute = EfiBadgingDisplayAttributeCenter;
}
Blt = NULL;
BltSize = 0;
Status = ConvertBmpToGopBlt (
ImageData,
ImageSize,
(VOID**)&Blt,
&BltSize,
&Height,
&Width
);
if (EFI_ERROR (Status)) {
gBS->FreePool (ImageData);
if (Badging == NULL) {
return Status;
} else {
continue;
}
}
switch (Attribute) {
case EfiBadgingDisplayAttributeLeftTop:
DestX = CoordinateX;
DestY = CoordinateY;
break;
case EfiBadgingDisplayAttributeCenterTop:
DestX = (SizeOfX - Width) / 2;
DestY = CoordinateY;
break;
case EfiBadgingDisplayAttributeRightTop:
DestX = (SizeOfX - Width - CoordinateX);
DestY = CoordinateY;;
break;
case EfiBadgingDisplayAttributeCenterRight:
DestX = (SizeOfX - Width - CoordinateX);
DestY = (SizeOfY - Height) / 2;
break;
case EfiBadgingDisplayAttributeRightBottom:
DestX = (SizeOfX - Width - CoordinateX);
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeCenterBottom:
DestX = (SizeOfX - Width) / 2;
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeLeftBottom:
DestX = CoordinateX;
DestY = (SizeOfY - Height - CoordinateY);
break;
case EfiBadgingDisplayAttributeCenterLeft:
DestX = CoordinateX;
DestY = (SizeOfY - Height) / 2;
break;
case EfiBadgingDisplayAttributeCenter:
DestX = (SizeOfX - Width) / 2;
DestY = (SizeOfY - Height) / 2;
break;
default:
DestX = CoordinateX;
DestY = CoordinateY;
break;
}
if ((DestX >= 0) && (DestY >= 0)) {
if (GraphicsOutput != NULL) {
Status = GraphicsOutput->Blt (
GraphicsOutput,
Blt,
EfiBltBufferToVideo,
0,
0,
(UINTN) DestX,
(UINTN) DestY,
Width,
Height,
Width * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
);
} else {
Status = UgaDraw->Blt (
UgaDraw,
(EFI_UGA_PIXEL *) Blt,
EfiUgaBltBufferToVideo,
0,
0,
(UINTN) DestX,
(UINTN) DestY,
Width,
Height,
Width * sizeof (EFI_UGA_PIXEL)
);
}
}
gBS->FreePool (ImageData);
gBS->FreePool (Blt);
if (Badging == NULL) {
break;
}
}
return Status;
}
EFI_STATUS
DisableQuietBoot (
VOID
)
/*++
Routine Description:
Use Console Control to turn on UGA based Simple Text Out consoles. The UGA
Simple Text Out screens will now be synced up with all non UGA output devices
Arguments:
NONE
Returns:
EFI_SUCCESS - UGA devices are back in text mode and synced up.
EFI_UNSUPPORTED - Logo not found
--*/
{
EFI_STATUS Status;
EFI_CONSOLE_CONTROL_PROTOCOL *ConsoleControl;
Status = gBS->LocateProtocol (&gEfiConsoleControlProtocolGuid, NULL, (VOID **) &ConsoleControl);
if (EFI_ERROR (Status)) {
return EFI_UNSUPPORTED;
}
return ConsoleControl->SetMode (ConsoleControl, EfiConsoleControlScreenText);
}
static EFI_GRAPHICS_OUTPUT_BLT_PIXEL mEfiColors[16] = {
{ 0x00, 0x00, 0x00, 0x00 },
{ 0x98, 0x00, 0x00, 0x00 },
{ 0x00, 0x98, 0x00, 0x00 },
{ 0x98, 0x98, 0x00, 0x00 },
{ 0x00, 0x00, 0x98, 0x00 },
{ 0x98, 0x00, 0x98, 0x00 },
{ 0x00, 0x98, 0x98, 0x00 },
{ 0x98, 0x98, 0x98, 0x00 },
{ 0x10, 0x10, 0x10, 0x00 },
{ 0xff, 0x10, 0x10, 0x00 },
{ 0x10, 0xff, 0x10, 0x00 },
{ 0xff, 0xff, 0x10, 0x00 },
{ 0x10, 0x10, 0xff, 0x00 },
{ 0xf0, 0x10, 0xff, 0x00 },
{ 0x10, 0xff, 0xff, 0x00 },
{ 0xff, 0xff, 0xff, 0x00 }
};
STATIC
UINTN
_IPrint (
IN EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput,
IN EFI_UGA_DRAW_PROTOCOL *UgaDraw,
IN EFI_SIMPLE_TEXT_OUT_PROTOCOL *Sto,
IN UINTN X,
IN UINTN Y,
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Foreground,
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *Background,
IN CHAR16 *fmt,
IN VA_LIST args
)
/*++
Routine Description:
Display string worker for: Print, PrintAt, IPrint, IPrintAt
Arguments:
GraphicsOutput - Graphics output protocol interface
UgaDraw - UGA draw protocol interface
Sto - Simple text out protocol interface
X - X coordinate to start printing
Y - Y coordinate to start printing
Foreground - Foreground color
Background - Background color
fmt - Format string
args - Print arguments
Returns:
EFI_SUCCESS - success
EFI_OUT_OF_RESOURCES - out of resources
--*/
{
VOID *Buffer;
EFI_STATUS Status;
UINT16 GlyphWidth;
UINT32 GlyphStatus;
UINT16 StringIndex;
UINTN Index;
CHAR16 *UnicodeWeight;
EFI_NARROW_GLYPH *Glyph;
EFI_HII_PROTOCOL *Hii;
EFI_GRAPHICS_OUTPUT_BLT_PIXEL *LineBuffer;
UINT32 HorizontalResolution;
UINT32 VerticalResolution;
UINT32 ColorDepth;
UINT32 RefreshRate;
UINTN BufferGlyphWidth;
GlyphStatus = 0;
//
// For now, allocate an arbitrarily long buffer
//
Buffer = AllocateZeroPool (0x10000);
if (Buffer == NULL) {
return EFI_OUT_OF_RESOURCES;
}
if (GraphicsOutput != NULL) {
HorizontalResolution = GraphicsOutput->Mode->Info->HorizontalResolution;
VerticalResolution = GraphicsOutput->Mode->Info->VerticalResolution;
} else {
//
// Get the current mode information from the UGA Draw Protocol
//
UgaDraw->GetMode (UgaDraw, &HorizontalResolution, &VerticalResolution, &ColorDepth, &RefreshRate);
}
LineBuffer = AllocatePool (sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL) * HorizontalResolution * GLYPH_WIDTH * GLYPH_HEIGHT);
if (LineBuffer == NULL) {
gBS->FreePool (Buffer);
return EFI_OUT_OF_RESOURCES;
}
Status = gBS->LocateProtocol (&gEfiHiiProtocolGuid, NULL, (VOID **) &Hii);
if (EFI_ERROR (Status)) {
goto Error;
}
UnicodeVSPrint (Buffer, 0x10000, fmt, args);
UnicodeWeight = (CHAR16 *) Buffer;
for (Index = 0; UnicodeWeight[Index] != 0; Index++) {
if (UnicodeWeight[Index] == CHAR_BACKSPACE ||
UnicodeWeight[Index] == CHAR_LINEFEED ||
UnicodeWeight[Index] == CHAR_CARRIAGE_RETURN) {
UnicodeWeight[Index] = 0;
}
}
for (Index = 0; Index < StrLen (Buffer); Index++) {
StringIndex = (UINT16) Index;
Status = Hii->GetGlyph (Hii, UnicodeWeight, &StringIndex, (UINT8 **) &Glyph, &GlyphWidth, &GlyphStatus);
if (EFI_ERROR (Status)) {
goto Error;
}
if (Foreground == NULL || Background == NULL) {
Status = Hii->GlyphToBlt (
Hii,
(UINT8 *) Glyph,
mEfiColors[Sto->Mode->Attribute & 0x0f],
mEfiColors[Sto->Mode->Attribute >> 4],
StrLen (Buffer),
GlyphWidth,
GLYPH_HEIGHT,
&LineBuffer[Index * GLYPH_WIDTH]
);
} else {
Status = Hii->GlyphToBlt (
Hii,
(UINT8 *) Glyph,
*Foreground,
*Background,
StrLen (Buffer),
GlyphWidth,
GLYPH_HEIGHT,
&LineBuffer[Index * GLYPH_WIDTH]
);
}
}
//
// Blt a character to the screen
//
BufferGlyphWidth = GLYPH_WIDTH * StrLen (Buffer);
if (GraphicsOutput != NULL) {
Status = GraphicsOutput->Blt (
GraphicsOutput,
LineBuffer,
EfiBltBufferToVideo,
0,
0,
X,
Y,
BufferGlyphWidth,
GLYPH_HEIGHT,
BufferGlyphWidth * sizeof (EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
);
} else {
Status = UgaDraw->Blt (
UgaDraw,
(EFI_UGA_PIXEL *) (UINTN) LineBuffer,
EfiUgaBltBufferToVideo,
0,
0,
X,
Y,
BufferGlyphWidth,
GLYPH_HEIGHT,
BufferGlyphWidth * sizeof (EFI_UGA_PIXEL)
);
}
Error:
gBS->FreePool (LineBuffer);
gBS->FreePool (Buffer);
return Status;
}
UINTN
PrintXY (
IN UINTN X,
IN UINTN Y,
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *ForeGround, OPTIONAL
IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BackGround, OPTIONAL
IN CHAR16 *Fmt,
...
)
/*++
Routine Description:
Prints a formatted unicode string to the default console
Arguments:
X - X coordinate to start printing
Y - Y coordinate to start printing
ForeGround - Foreground color
BackGround - Background color
Fmt - Format string
... - Print arguments
Returns:
Length of string printed to the console
--*/
{
EFI_HANDLE Handle;
EFI_GRAPHICS_OUTPUT_PROTOCOL *GraphicsOutput;
EFI_UGA_DRAW_PROTOCOL *UgaDraw;
EFI_SIMPLE_TEXT_OUT_PROTOCOL *Sto;
EFI_STATUS Status;
VA_LIST Args;
VA_START (Args, Fmt);
UgaDraw = NULL;
Handle = gST->ConsoleOutHandle;
Status = gBS->HandleProtocol (
Handle,
&gEfiGraphicsOutputProtocolGuid,
(VOID **) &GraphicsOutput
);
if (EFI_ERROR (Status)) {
GraphicsOutput = NULL;
Status = gBS->HandleProtocol (
Handle,
&gEfiUgaDrawProtocolGuid,
(VOID **) &UgaDraw
);
if (EFI_ERROR (Status)) {
return Status;
}
}
Status = gBS->HandleProtocol (
Handle,
&gEfiSimpleTextOutProtocolGuid,
(VOID **) &Sto
);
if (EFI_ERROR (Status)) {
return Status;
}
return _IPrint (GraphicsOutput, UgaDraw, Sto, X, Y, ForeGround, BackGround, Fmt, Args);
}