Michael D Kinney 9d510e61fc MdeModulePkg: Replace BSD License with BSD+Patent License
https://bugzilla.tianocore.org/show_bug.cgi?id=1373

Replace BSD 2-Clause License with BSD+Patent License.  This change is
based on the following emails:

  https://lists.01.org/pipermail/edk2-devel/2019-February/036260.html
  https://lists.01.org/pipermail/edk2-devel/2018-October/030385.html

RFCs with detailed process for the license change:

  V3: https://lists.01.org/pipermail/edk2-devel/2019-March/038116.html
  V2: https://lists.01.org/pipermail/edk2-devel/2019-March/037669.html
  V1: https://lists.01.org/pipermail/edk2-devel/2019-March/037500.html

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
2019-04-09 10:58:08 -07:00

202 lines
7.8 KiB
C

/** @file
PEI IOMMU PPI.
Copyright (c) 2017 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef __PEI_IOMMU_H__
#define __PEI_IOMMU_H__
//
// for EFI_ALLOCATE_TYPE
//
#include <Uefi.h>
//
// Include protocol for common definition
// EDKII_IOMMU_ACCESS_xxx
// EDKII_IOMMU_OPERATION
//
#include <Protocol/IoMmu.h>
//
// IOMMU Ppi GUID value
//
#define EDKII_IOMMU_PPI_GUID \
{ \
0x70b0af26, 0xf847, 0x4bb6, { 0xaa, 0xb9, 0xcd, 0xe8, 0x4f, 0xc6, 0x14, 0x31 } \
}
//
// Forward reference for pure ANSI compatability
//
typedef struct _EDKII_IOMMU_PPI EDKII_IOMMU_PPI;
//
// Revision The revision to which the IOMMU interface adheres.
// All future revisions must be backwards compatible.
// If a future version is not back wards compatible it is not the same GUID.
//
#define EDKII_IOMMU_PPI_REVISION 0x00010000
/**
Set IOMMU attribute for a system memory.
If the IOMMU PPI exists, the system memory cannot be used
for DMA by default.
When a device requests a DMA access for a system memory,
the device driver need use SetAttribute() to update the IOMMU
attribute to request DMA access (read and/or write).
@param[in] This The PPI instance pointer.
@param[in] Mapping The mapping value returned from Map().
@param[in] IoMmuAccess The IOMMU access.
@retval EFI_SUCCESS The IoMmuAccess is set for the memory range specified by DeviceAddress and Length.
@retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
@retval EFI_INVALID_PARAMETER IoMmuAccess specified an illegal combination of access.
@retval EFI_UNSUPPORTED The bit mask of IoMmuAccess is not supported by the IOMMU.
@retval EFI_UNSUPPORTED The IOMMU does not support the memory range specified by Mapping.
@retval EFI_OUT_OF_RESOURCES There are not enough resources available to modify the IOMMU access.
@retval EFI_DEVICE_ERROR The IOMMU device reported an error while attempting the operation.
@retval EFI_NOT_AVAILABLE_YET DMA protection has been enabled, but DMA buffer are
not available to be allocated yet.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_IOMMU_SET_ATTRIBUTE)(
IN EDKII_IOMMU_PPI *This,
IN VOID *Mapping,
IN UINT64 IoMmuAccess
);
/**
Provides the controller-specific addresses required to access system memory from a
DMA bus master.
@param This The PPI instance pointer.
@param Operation Indicates if the bus master is going to read or write to system memory.
@param HostAddress The system memory address to map to the PCI controller.
@param NumberOfBytes On input the number of bytes to map. On output the number of bytes
that were mapped.
@param DeviceAddress The resulting map address for the bus master PCI controller to use to
access the hosts HostAddress.
@param Mapping A resulting value to pass to Unmap().
@retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
@retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
@retval EFI_NOT_AVAILABLE_YET DMA protection has been enabled, but DMA buffer are
not available to be allocated yet.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_IOMMU_MAP)(
IN EDKII_IOMMU_PPI *This,
IN EDKII_IOMMU_OPERATION Operation,
IN VOID *HostAddress,
IN OUT UINTN *NumberOfBytes,
OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
OUT VOID **Mapping
);
/**
Completes the Map() operation and releases any corresponding resources.
@param This The PPI instance pointer.
@param Mapping The mapping value returned from Map().
@retval EFI_SUCCESS The range was unmapped.
@retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
@retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
@retval EFI_NOT_AVAILABLE_YET DMA protection has been enabled, but DMA buffer are
not available to be allocated yet.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_IOMMU_UNMAP)(
IN EDKII_IOMMU_PPI *This,
IN VOID *Mapping
);
/**
Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
OperationBusMasterCommonBuffer64 mapping.
@param This The PPI instance pointer.
@param MemoryType The type of memory to allocate, EfiBootServicesData or
EfiRuntimeServicesData.
@param Pages The number of pages to allocate.
@param HostAddress A pointer to store the base system memory address of the
allocated range.
@param Attributes The requested bit mask of attributes for the allocated range.
@retval EFI_SUCCESS The requested memory pages were allocated.
@retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
MEMORY_WRITE_COMBINE, MEMORY_CACHED and DUAL_ADDRESS_CYCLE.
@retval EFI_INVALID_PARAMETER One or more parameters are invalid.
@retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
@retval EFI_NOT_AVAILABLE_YET DMA protection has been enabled, but DMA buffer are
not available to be allocated yet.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_IOMMU_ALLOCATE_BUFFER)(
IN EDKII_IOMMU_PPI *This,
IN EFI_MEMORY_TYPE MemoryType,
IN UINTN Pages,
IN OUT VOID **HostAddress,
IN UINT64 Attributes
);
/**
Frees memory that was allocated with AllocateBuffer().
@param This The PPI instance pointer.
@param Pages The number of pages to free.
@param HostAddress The base system memory address of the allocated range.
@retval EFI_SUCCESS The requested memory pages were freed.
@retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
was not allocated with AllocateBuffer().
@retval EFI_NOT_AVAILABLE_YET DMA protection has been enabled, but DMA buffer are
not available to be allocated yet.
**/
typedef
EFI_STATUS
(EFIAPI *EDKII_PEI_IOMMU_FREE_BUFFER)(
IN EDKII_IOMMU_PPI *This,
IN UINTN Pages,
IN VOID *HostAddress
);
///
/// IOMMU PPI structure.
///
struct _EDKII_IOMMU_PPI {
UINT64 Revision;
EDKII_PEI_IOMMU_SET_ATTRIBUTE SetAttribute;
EDKII_PEI_IOMMU_MAP Map;
EDKII_PEI_IOMMU_UNMAP Unmap;
EDKII_PEI_IOMMU_ALLOCATE_BUFFER AllocateBuffer;
EDKII_PEI_IOMMU_FREE_BUFFER FreeBuffer;
};
///
/// IOMMU PPI GUID variable.
///
extern EFI_GUID gEdkiiIoMmuPpiGuid;
#endif