mirror of https://github.com/acidanthera/audk.git
33 lines
1.3 KiB
Plaintext
33 lines
1.3 KiB
Plaintext
==============================================
|
||
= ARM RealView Emulation Board Documentation =
|
||
==============================================
|
||
|
||
|
||
Howto build UEFI RealView EB for RealTime System Model
|
||
------------------------------------------------------
|
||
|
||
1. Set up the environment. And build the EDK2’s tools
|
||
export EDK_TOOLS_PATH=`pwd`/BaseTools
|
||
. edksetup.sh `pwd`/BaseTools/
|
||
make -C $EDK_TOOLS_PATH
|
||
|
||
2. Build the ARM RealView EB UEFI Firmware
|
||
build -a ARM -p ArmPlatformPkg/ArmRealViewEBPkg/ArmRealViewEb-RTSM-A8.dsc -t RVCT
|
||
|
||
|
||
Howto test UEFI RealView EB on RealTime System Model - Example Cortex A8
|
||
------------------------------------------------------------------------
|
||
|
||
1. Build 'ArmRealViewEb-RTSM-A8.dsc'
|
||
|
||
2. To Run ArmRealViewEbPkg on the RTSM
|
||
1. Start RealView Debugger
|
||
2. Target > "Connect to Target"
|
||
3. Add RTSM
|
||
4. Configure this new RTSM.
|
||
5. Choose CortexA8
|
||
6. Setup the 'fname' of baseboard.flashldr_0 with your FD file (eg: c:\dev\edk2\Build\ArmRealViewEb-RTSM-A8\DEBUG_RVCT\FV\ARMREALVIEWEB_EFI.fd)
|
||
7. Turn use_s8 to TRUE in baseboard.sp810_sysctrl
|
||
8. Turn uart_enable to TRUE in baseboard.uart_0
|
||
4. Connect a telnet client to the port 5000 of your localhost
|
||
5. Launch the program |