audk/MdeModulePkg/Bus/Pci/UhciDxe/UhciReg.c

/** @file

Copyright (c) 2007, Intel Corporation
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

Module Name:

  UhciReg.c

Abstract:

  The UHCI register operation routines.

Revision History


**/

#include "Uhci.h"


/**
  Read a UHCI register

  @param  PciIo        The EFI_PCI_IO_PROTOCOL to use
  @param  Offset       Register offset to USB_BAR_INDEX

  @return Content of register

**/
UINT16
UhciReadReg (
  IN EFI_PCI_IO_PROTOCOL     *PciIo,
  IN UINT32                  Offset
  )
{
  UINT16      Data;
  EFI_STATUS  Status;

  Status = PciIo->Io.Read (
                      PciIo,
                      EfiPciIoWidthUint16,
                      USB_BAR_INDEX,
                      Offset,
                      1,
                      &Data
                      );

  if (EFI_ERROR (Status)) {
    UHCI_ERROR (("UhciReadReg: PciIo Io.Read error: %r at offset %d\n", Status, Offset));

    Data = 0xFFFF;
  }

  return Data;
}


/**
  Write data to UHCI register

  @param  PciIo        The EFI_PCI_IO_PROTOCOL to use
  @param  Offset       Register offset to USB_BAR_INDEX
  @param  Data         Data to write

  @return VOID

**/
VOID
UhciWriteReg (
  IN EFI_PCI_IO_PROTOCOL     *PciIo,
  IN UINT32                  Offset,
  IN UINT16                  Data
  )
{
  EFI_STATUS  Status;

  Status = PciIo->Io.Write (
                      PciIo,
                      EfiPciIoWidthUint16,
                      USB_BAR_INDEX,
                      Offset,
                      1,
                      &Data
                      );

  if (EFI_ERROR (Status)) {
    UHCI_ERROR (("UhciWriteReg: PciIo Io.Write error: %r at offset %d\n", Status, Offset));
  }
}


/**
  Set a bit of the UHCI Register

  @param  PciIo        The EFI_PCI_IO_PROTOCOL to use
  @param  Offset       Register offset to USB_BAR_INDEX
  @param  Bit          The bit to set

  @return None

**/
VOID
UhciSetRegBit (
  IN EFI_PCI_IO_PROTOCOL     *PciIo,
  IN UINT32                  Offset,
  IN UINT16                  Bit
  )
{
  UINT16  Data;

  Data = UhciReadReg (PciIo, Offset);
  Data = (UINT16) (Data |Bit);
  UhciWriteReg (PciIo, Offset, Data);
}


/**
  Clear a bit of the UHCI Register

  @param  PciIo        The PCI_IO protocol to access the PCI
  @param  Offset       Register offset to USB_BAR_INDEX
  @param  Bit          The bit to clear

  @return None

**/
VOID
UhciClearRegBit (
  IN EFI_PCI_IO_PROTOCOL     *PciIo,
  IN UINT32                  Offset,
  IN UINT16                  Bit
  )
{
  UINT16  Data;

  Data = UhciReadReg (PciIo, Offset);
  Data = (UINT16) (Data & ~Bit);
  UhciWriteReg (PciIo, Offset, Data);
}


/**
  Clear all the interrutp status bits, these bits
  are Write-Clean

  @param  Uhc          The UHCI device

  @return None

**/
VOID
UhciAckAllInterrupt (
  IN  USB_HC_DEV          *Uhc
  )
{
  UhciWriteReg (Uhc->PciIo, USBSTS_OFFSET, 0x3F);

  //
  // If current HC is halted, re-enable it. Host Controller Process Error
  // is a temporary error status.
  //
  if (!UhciIsHcWorking (Uhc->PciIo)) {
    UHCI_ERROR (("UhciAckAllInterrupt: re-enable the UHCI from system error\n"));
    Uhc->UsbHc.SetState (&Uhc->UsbHc, EfiUsbHcStateOperational);
  }
}



/**
  Stop the host controller

  @param  Uhc          The UHCI device
  @param  Timeout      Max time allowed

  @retval EFI_SUCCESS  The host controller is stopped
  @retval EFI_TIMEOUT  Failed to stop the host controller

**/
EFI_STATUS
UhciStopHc (
  IN USB_HC_DEV         *Uhc,
  IN UINTN              Timeout
  )
{
  UINT16                UsbSts;
  UINTN                 Index;

  UhciClearRegBit (Uhc->PciIo, USBCMD_OFFSET, USBCMD_RS);

  //
  // ensure the HC is in halt status after send the stop command
  // Timeout is in us unit.
  //
  for (Index = 0; Index < (Timeout / 50) + 1; Index++) {
    UsbSts = UhciReadReg (Uhc->PciIo, USBSTS_OFFSET);

    if ((UsbSts & USBSTS_HCH) == USBSTS_HCH) {
      return EFI_SUCCESS;
    }

    gBS->Stall (50);
  }

  return EFI_TIMEOUT;
}


/**
  Check whether the host controller operates well

  @param  PciIo        The PCI_IO protocol to use

  @retval TRUE         Host controller is working
  @retval FALSE        Host controller is halted or system error

**/
BOOLEAN
UhciIsHcWorking (
  IN EFI_PCI_IO_PROTOCOL     *PciIo
  )
{
  UINT16                UsbSts;

  UsbSts = UhciReadReg (PciIo, USBSTS_OFFSET);

  if (UsbSts & (USBSTS_HCPE | USBSTS_HSE | USBSTS_HCH)) {
    UHCI_ERROR (("UhciIsHcWorking: current USB state is %x\n", UsbSts));
    return FALSE;
  }

  return TRUE;
}


/**
  Set the UHCI frame list base address. It can't use
  UhciWriteReg which access memory in UINT16.

  @param  PciIo        The EFI_PCI_IO_PROTOCOL to use
  @param  Addr         Address to set

  @return VOID

**/
VOID
UhciSetFrameListBaseAddr (
  IN EFI_PCI_IO_PROTOCOL     *PciIo,
  IN VOID                    *Addr
  )
{
  EFI_STATUS              Status;
  UINT32                  Data;

  Data = (UINT32) ((UINTN) Addr & 0xFFFFF000);

  Status = PciIo->Io.Write (
                       PciIo,
                       EfiPciIoWidthUint32,
                       USB_BAR_INDEX,
                       (UINT64) USB_FRAME_BASE_OFFSET,
                       1,
                       &Data
                       );

  if (EFI_ERROR (Status)) {
    UHCI_ERROR (("UhciSetFrameListBaseAddr: PciIo Io.Write error: %r\n", Status));
  }
}


/**
  Disable USB Emulation

  @param  PciIo        The EFI_PCI_IO_PROTOCOL protocol to use

  @return VOID

**/
VOID
UhciTurnOffUsbEmulation (
  IN EFI_PCI_IO_PROTOCOL     *PciIo
  )
{
  UINT16            Command;

  Command = 0;

  PciIo->Pci.Write (
               PciIo,
               EfiPciIoWidthUint16,
               USB_EMULATION_OFFSET,
               1,
               &Command
               );
}