audk/QuarkPlatformPkg/Acpi/AcpiTables/Dsdt/PciHostBridge.asi

/** @file
PCI Host Bridge Definitions

Copyright (c) 2013-2015 Intel Corporation.

This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/


Name(PBRS, ResourceTemplate() {
   WORDBusNumber(            //Bus number resource (0); the bridge produces bus numbers for its subsequent buses
      ResourceProducer,      // bit 0 of general flags is 1
      MinFixed,              // Range is fixed
      MaxFixed,              // Range is fixed
      PosDecode,             // PosDecode
      0x0000,                // Granularity
      0x0000,                // Min
      0x001f,                // Max
      0x0000,                // Translation
      0x0020                 // Range Length = Max-Min+1
   )

   WORDIO(                   //Consumed-and-produced resource (all I/O below CF8)
      ResourceProducer,      // bit 0 of general flags is 0
      MinFixed,              // Range is fixed
      MaxFixed,              // Range is fixed
      PosDecode,
      EntireRange,
      0x0000,                // Granularity
      0x0000,                // Min
      0x0cf7,                // Max
      0x0000,                // Translation
      0x0cf8                 // Range Length
   )

   IO(                       //Consumed resource (CF8-CFF)
      Decode16,
      0x0cf8,
      0xcf8,
      1,
      8
   )

   WORDIO(                   //Consumed-and-produced resource (all I/O above CFF)
      ResourceProducer,      // bit 0 of general flags is 0
      MinFixed,              // Range is fixed
      MaxFixed,              // Range is fixed
      PosDecode,
      EntireRange,
      0x0000,                // Granularity
      0x0d00,                // Min
      0xffff,                // Max
      0x0000,                // Translation
      0xf300                 // Range Length
   )

   DWORDMEMORY(              // descriptor for dos area(0->0xa0000)
      ResourceProducer,      // bit 0 of general flags is 0
      PosDecode,
      MinFixed,              // Range is fixed
      MaxFixed,              // Range is Fixed
      Cacheable,
      ReadWrite,
      0x00000000,            // Granularity
      0x000a0000,            // Min
      0x000bffff,            // Max
      0x00000000,            // Translation
      0x00020000             // Range Length
   )

   DWORDMemory(              // Consumed-and-produced resource for pci memory mapped memory
      ResourceProducer,      // bit 0 of general flags is 0
      PosDecode,             // positive Decode
      MinFixed,              // Range is fixed
      MaxFixed,              // Range is fixed
      Cacheable,
      ReadWrite,
      0x00000000,            // Granularity
      0x00000000,            // Min (calculated dynamically)

      0xfebfffff,            // Max = IO Apic base address - 1
      0x00000000,            // Translation
      0xfec00000,            // Range Length (calculated dynamically)
      ,                      // Optional field left blank
      ,                      // Optional field left blank
      MEM1                   // Name declaration for this descriptor
   )

})          // end of CRES Buffer


Method(_CRS, 0x0, NotSerialized)
{
    CreateDWordField(PBRS, \_SB.PCI0.MEM1._MIN, MMIN)
    CreateDWordField(PBRS, \_SB.PCI0.MEM1._MAX, MMAX)
    CreateDWordField(PBRS, \_SB.PCI0.MEM1._LEN, MLEN)

    // HMBOUND is PCI memory base
    And(MNRD(0x03, 0x08), 0xFFFFF000, MMIN)
    Add(Subtract(MMAX, MMIN), 1, MLEN)

    Return(PBRS)
}

// Message Nework Registers
OperationRegion(MNR, PCI_Config, 0xD0, 0x10)
Field(MNR, DWordAcc, NoLock, Preserve)
{
    MCR, 32,           // Message Control Register
    MDR, 32            // Message Data Register
}

// Message Nework Read Method
// Arg0 = Port
// Arg1 = RegAddress
// return 32 bit register value
Method(MNRD, 2, Serialized)
{
    Or(ShiftLeft(Arg0, 16), ShiftLeft(Arg1, 8), Local0)
    Or(Local0, 0x100000F0, Local0)
    Store(Local0, MCR)
    Return(MDR)
}

// Message Nework Write Method
// Arg0 = Port
// Arg1 = RegAddress
// Arg2 = 32 bit write value
Method(MNWR, 3, Serialized)
{
    Store(Arg2, MDR)
    Or(ShiftLeft(Arg0, 16), ShiftLeft(Arg1, 8), Local0)
    Or(Local0, 0x110000F0, Local0)
    Store(Local0, MCR)
}

Method(_PRT, 0, NotSerialized)
{
  If (LEqual(\GPIC, Zero)) // 8259 Interrupt Routing
  {
    Return (
      Package()
      {
        // Bus 0, Device 20 - IOSFAHB Bridge
        Package() {0x0014ffff, 0, \_SB.PCI0.LPC.LNKA, 0}, // INTA
        Package() {0x0014ffff, 1, \_SB.PCI0.LPC.LNKB, 0}, // INTB
        Package() {0x0014ffff, 2, \_SB.PCI0.LPC.LNKC, 0}, // INTC
        Package() {0x0014ffff, 3, \_SB.PCI0.LPC.LNKD, 0}, // INTD

        // Bus 0, Device 21 - IOSFAHB Bridge
        Package() {0x0015ffff, 0, \_SB.PCI0.LPC.LNKA, 0}, // INTA
        Package() {0x0015ffff, 1, \_SB.PCI0.LPC.LNKB, 0}, // INTB
        Package() {0x0015ffff, 2, \_SB.PCI0.LPC.LNKC, 0}, // INTC
        Package() {0x0015ffff, 3, \_SB.PCI0.LPC.LNKD, 0}, // INTD

        // Bus 0, Device 23 - PCIe port 0
        Package() {0x0017ffff, 0, \_SB.PCI0.LPC.LNKE, 0}, // INTA
        Package() {0x0017ffff, 1, \_SB.PCI0.LPC.LNKF, 0}, // INTB
        Package() {0x0017ffff, 2, \_SB.PCI0.LPC.LNKG, 0}, // INTC
        Package() {0x0017ffff, 3, \_SB.PCI0.LPC.LNKH, 0}, // INTD

        // Bus 0, Device 31
        Package() {0x001fffff, 0, \_SB.PCI0.LPC.LNKA, 0}, // LPC Bridge
      }
    )
  }
  else {
    Return (
      Package()
      {
        // Bus 0, Device 20 - IOSFAHB Bridge
        Package() {0x0014ffff, 0, 0, 16}, // INTA
        Package() {0x0014ffff, 1, 0, 17}, // INTB
        Package() {0x0014ffff, 2, 0, 18}, // INTC
        Package() {0x0014ffff, 3, 0, 19}, // INTD

        // Bus 0, Device 21 - IOSFAHB Bridge
        Package() {0x0015ffff, 0, 0, 16}, // INTA
        Package() {0x0015ffff, 1, 0, 17}, // INTB
        Package() {0x0015ffff, 2, 0, 18}, // INTC
        Package() {0x0015ffff, 3, 0, 19}, // INTD

        // Bus 0, Device 23 - PCIe port 0
        Package() {0x0017ffff, 0, 0, 20}, // INTA
        Package() {0x0017ffff, 1, 0, 21}, // INTB
        Package() {0x0017ffff, 2, 0, 22}, // INTC
        Package() {0x0017ffff, 3, 0, 23}, // INTD

        // Bus 0, Device 31
        Package() {0x001fffff, 0, 0, 16}, // LPC Bridge
      }
    )
  }
}