audk/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c

1273 lines
42 KiB
C

/** @file
SCSI Bus driver that layers on every SCSI Pass Thru and
Extended SCSI Pass Thru protocol in the system.
Copyright (c) 2006 - 2008, Intel Corporation. <BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "ScsiBus.h"
EFI_DRIVER_BINDING_PROTOCOL gSCSIBusDriverBinding = {
SCSIBusDriverBindingSupported,
SCSIBusDriverBindingStart,
SCSIBusDriverBindingStop,
0xa,
NULL,
NULL
};
//
// The ScsiBusProtocol is just used to locate ScsiBusDev
// structure in the SCSIBusDriverBindingStop(). Then we can
// Close all opened protocols and release this structure.
//
EFI_GUID mScsiBusProtocolGuid = EFI_SCSI_BUS_PROTOCOL_GUID;
VOID *mWorkingBuffer;
/**
Convert EFI_SCSI_IO_SCSI_REQUEST_PACKET packet to EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET packet.
@param Packet The pointer of EFI_SCSI_IO_SCSI_REQUEST_PACKET
@param CommandPacket The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET
**/
EFI_STATUS
EFIAPI
ScsiioToPassThruPacket (
IN EFI_SCSI_IO_SCSI_REQUEST_PACKET *Packet,
OUT EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *CommandPacket
);
/**
Convert EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET packet to EFI_SCSI_IO_SCSI_REQUEST_PACKET packet.
@param ScsiPacket The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET
@param Packet The pointer of EFI_SCSI_IO_SCSI_REQUEST_PACKET
**/
EFI_STATUS
EFIAPI
PassThruToScsiioPacket (
IN EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *ScsiPacket,
OUT EFI_SCSI_IO_SCSI_REQUEST_PACKET *Packet
);
/**
Notify Function in which convert EFI1.0 PassThru Packet back to UEF2.0
SCSI IO Packet.
@param Event The instance of EFI_EVENT.
@param Context The parameter passed in.
**/
VOID
EFIAPI
NotifyFunction (
IN EFI_EVENT Event,
IN VOID *Context
);
/**
The user Entry Point for module ScsiBus. The user code starts with this function.
@param ImageHandle The firmware allocated handle for the EFI image.
@param SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS The entry point is executed successfully.
@retval other Some error occurs when executing this entry point.
**/
EFI_STATUS
EFIAPI
InitializeScsiBus(
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
//
// Install driver model protocol(s).
//
Status = EfiLibInstallDriverBindingComponentName2 (
ImageHandle,
SystemTable,
&gSCSIBusDriverBinding,
ImageHandle,
&gScsiBusComponentName,
&gScsiBusComponentName2
);
ASSERT_EFI_ERROR (Status);
return Status;
}
/**
Test to see if this driver supports ControllerHandle.
This service is called by the EFI boot service ConnectController(). In order
to make drivers as small as possible, there are a few calling restrictions for
this service. ConnectController() must follow these calling restrictions. If
any other agent wishes to call Supported() it must also follow these calling
restrictions.
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to test
@param RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS This driver supports this device
@retval EFI_ALREADY_STARTED This driver is already running on this device
@retval other This driver does not support this device
**/
EFI_STATUS
EFIAPI
SCSIBusDriverBindingSupported (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_SCSI_PASS_THRU_PROTOCOL *PassThru;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtPassThru;
//
// Check for the existence of Extended SCSI Pass Thru Protocol and SCSI Pass Thru Protocol
//
Status = gBS->OpenProtocol (
Controller,
&gEfiExtScsiPassThruProtocolGuid,
(VOID **)&ExtPassThru,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
if (EFI_ERROR (Status)) {
Status = gBS->OpenProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
(VOID **)&PassThru,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (Status == EFI_ALREADY_STARTED) {
return EFI_SUCCESS;
}
if (EFI_ERROR (Status)) {
return Status;
}
gBS->CloseProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
);
return EFI_SUCCESS;
}
gBS->CloseProtocol (
Controller,
&gEfiExtScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
);
return EFI_SUCCESS;
}
/**
Start this driver on ControllerHandle.
This service is called by the EFI boot service ConnectController(). In order
to make drivers as small as possible, there are a few calling restrictions for
this service. ConnectController() must follow these calling restrictions. If
any other agent wishes to call Start() it must also follow these calling
restrictions.
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to bind driver to
@param RemainingDevicePath Optional parameter use to pick a specific child
device to start.
@retval EFI_SUCCESS This driver is added to ControllerHandle
@retval EFI_ALREADY_STARTED This driver is already running on ControllerHandle
@retval other This driver does not support this device
**/
EFI_STATUS
EFIAPI
SCSIBusDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
UINT64 Lun;
UINT8 *TargetId;
BOOLEAN ScanOtherPuns;
BOOLEAN FromFirstTarget;
BOOLEAN ExtScsiSupport;
EFI_STATUS Status;
EFI_STATUS DevicePathStatus;
EFI_STATUS PassThruStatus;
SCSI_BUS_DEVICE *ScsiBusDev;
SCSI_TARGET_ID *ScsiTargetId;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
EFI_SCSI_PASS_THRU_PROTOCOL *ScsiInterface;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiInterface;
EFI_SCSI_BUS_PROTOCOL *BusIdentify;
TargetId = NULL;
ScsiTargetId = NULL;
ScanOtherPuns = TRUE;
FromFirstTarget = FALSE;
ExtScsiSupport = FALSE;
PassThruStatus = EFI_SUCCESS;
ScsiTargetId = AllocateZeroPool(sizeof(SCSI_TARGET_ID));
if (ScsiTargetId == NULL) {
return EFI_OUT_OF_RESOURCES;
}
TargetId = &ScsiTargetId->ScsiId.ExtScsi[0];
DevicePathStatus = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (DevicePathStatus) && (DevicePathStatus != EFI_ALREADY_STARTED)) {
return DevicePathStatus;
}
//
// To keep backward compatibility, UEFI ExtPassThru Protocol is supported as well as
// EFI PassThru Protocol. From priority perspective, ExtPassThru Protocol is firstly
// tried to open on host controller handle. If fails, then PassThru Protocol is tried instead.
//
Status = gBS->OpenProtocol (
Controller,
&gEfiExtScsiPassThruProtocolGuid,
(VOID **) &ExtScsiInterface,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
//
// Fail to open UEFI ExtendPassThru Protocol, then try to open EFI PassThru Protocol instead.
//
if (EFI_ERROR(Status) && (Status != EFI_ALREADY_STARTED)) {
Status = gBS->OpenProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
(VOID **) &ScsiInterface,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
//
// Fail to open EFI PassThru Protocol, Close the DevicePathProtocol if it is opened by this time.
//
if (EFI_ERROR (Status) && (Status != EFI_ALREADY_STARTED)) {
if (!EFI_ERROR(DevicePathStatus)) {
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
}
return Status;
}
} else {
//
// Succeed to open ExtPassThru Protocol, and meanwhile open PassThru Protocol
// with BY_DRIVER if it is also present on the handle. The intent is to prevent
// another SCSI Bus Driver to work on the same host handle.
//
ExtScsiSupport = TRUE;
PassThruStatus = gBS->OpenProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
(VOID **) &ScsiInterface,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
}
if (Status != EFI_ALREADY_STARTED) {
//
// Go through here means either ExtPassThru or PassThru Protocol is successfully opened
// on this handle for this time. Then construct Host controller private data.
//
ScsiBusDev = NULL;
ScsiBusDev = AllocateZeroPool(sizeof(SCSI_BUS_DEVICE));
if (ScsiBusDev == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto ErrorExit;
}
ScsiBusDev->Signature = SCSI_BUS_DEVICE_SIGNATURE;
ScsiBusDev->ExtScsiSupport = ExtScsiSupport;
ScsiBusDev->DevicePath = ParentDevicePath;
if (ScsiBusDev->ExtScsiSupport) {
ScsiBusDev->ExtScsiInterface = ExtScsiInterface;
} else {
ScsiBusDev->ScsiInterface = ScsiInterface;
}
//
// Install EFI_SCSI_BUS_PROTOCOL to the controller handle, So ScsiBusDev could be
// retrieved on this controller handle. With ScsiBusDev, we can know which PassThru
// Protocol is present on the handle, UEFI ExtPassThru Protocol or EFI PassThru Protocol.
//
Status = gBS->InstallProtocolInterface (
&Controller,
&mScsiBusProtocolGuid,
EFI_NATIVE_INTERFACE,
&ScsiBusDev->BusIdentify
);
if (EFI_ERROR (Status)) {
goto ErrorExit;
}
} else {
//
// Go through here means Start() is re-invoked again, nothing special is required to do except
// picking up Host controller private information.
//
Status = gBS->OpenProtocol (
Controller,
&mScsiBusProtocolGuid,
(VOID **) &BusIdentify,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return Status;
}
ScsiBusDev = SCSI_BUS_CONTROLLER_DEVICE_FROM_THIS (BusIdentify);
}
if (RemainingDevicePath == NULL) {
SetMem (ScsiTargetId, TARGET_MAX_BYTES,0xFF);
Lun = 0;
FromFirstTarget = TRUE;
} else {
if (ScsiBusDev->ExtScsiSupport) {
ScsiBusDev->ExtScsiInterface->GetTargetLun (ScsiBusDev->ExtScsiInterface, RemainingDevicePath, &TargetId, &Lun);
} else {
ScsiBusDev->ScsiInterface->GetTargetLun (ScsiBusDev->ScsiInterface, RemainingDevicePath, &ScsiTargetId->ScsiId.Scsi, &Lun);
}
}
while(ScanOtherPuns) {
if (FromFirstTarget) {
//
// Remaining Device Path is NULL, scan all the possible Puns in the
// SCSI Channel.
//
if (ScsiBusDev->ExtScsiSupport) {
Status = ScsiBusDev->ExtScsiInterface->GetNextTargetLun (ScsiBusDev->ExtScsiInterface, &TargetId, &Lun);
} else {
Status = ScsiBusDev->ScsiInterface->GetNextDevice (ScsiBusDev->ScsiInterface, &ScsiTargetId->ScsiId.Scsi, &Lun);
}
if (EFI_ERROR (Status)) {
//
// no legal Pun and Lun found any more
//
break;
}
} else {
ScanOtherPuns = FALSE;
}
//
// Avoid creating handle for the host adapter.
//
if (ScsiBusDev->ExtScsiSupport) {
if ((ScsiTargetId->ScsiId.Scsi) == ScsiBusDev->ExtScsiInterface->Mode->AdapterId) {
continue;
}
} else {
if ((ScsiTargetId->ScsiId.Scsi) == ScsiBusDev->ScsiInterface->Mode->AdapterId) {
continue;
}
}
//
// Scan for the scsi device, if it attaches to the scsi bus,
// then create handle and install scsi i/o protocol.
//
Status = ScsiScanCreateDevice (This, Controller, ScsiTargetId, Lun, ScsiBusDev);
}
FreePool (ScsiTargetId);
return EFI_SUCCESS;
ErrorExit:
if (ScsiBusDev != NULL) {
FreePool (ScsiBusDev);
}
if (ExtScsiSupport) {
gBS->CloseProtocol (
Controller,
&gEfiExtScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
);
if (!EFI_ERROR (PassThruStatus)) {
gBS->CloseProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
);
}
} else {
gBS->CloseProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
);
}
return Status;
}
/**
Stop this driver on ControllerHandle.
This service is called by the EFI boot service DisconnectController().
In order to make drivers as small as possible, there are a few calling
restrictions for this service. DisconnectController() must follow these
calling restrictions. If any other agent wishes to call Stop() it must also
follow these calling restrictions.
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
children is zero stop the entire bus driver.
@param ChildHandleBuffer List of Child Handles to Stop.
@retval EFI_SUCCESS This driver is removed ControllerHandle
@retval other This driver was not removed from this device
**/
EFI_STATUS
EFIAPI
SCSIBusDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
BOOLEAN AllChildrenStopped;
UINTN Index;
EFI_SCSI_IO_PROTOCOL *ScsiIo;
SCSI_IO_DEV *ScsiIoDevice;
VOID *ScsiPassThru;
EFI_SCSI_BUS_PROTOCOL *Scsidentifier;
SCSI_BUS_DEVICE *ScsiBusDev;
if (NumberOfChildren == 0) {
//
// Get the SCSI_BUS_DEVICE
//
Status = gBS->OpenProtocol (
Controller,
&mScsiBusProtocolGuid,
(VOID **) &Scsidentifier,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
return EFI_DEVICE_ERROR;
}
ScsiBusDev = SCSI_BUS_CONTROLLER_DEVICE_FROM_THIS (Scsidentifier);
//
// Uninstall SCSI Bus Protocol
//
gBS->UninstallProtocolInterface (
Controller,
&mScsiBusProtocolGuid,
&ScsiBusDev->BusIdentify
);
//
// Close the bus driver
//
if (ScsiBusDev->ExtScsiSupport) {
gBS->CloseProtocol (
Controller,
&gEfiExtScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
);
} else {
gBS->CloseProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
This->DriverBindingHandle,
Controller
);
}
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
FreePool (ScsiBusDev);
return EFI_SUCCESS;
}
AllChildrenStopped = TRUE;
for (Index = 0; Index < NumberOfChildren; Index++) {
Status = gBS->OpenProtocol (
ChildHandleBuffer[Index],
&gEfiScsiIoProtocolGuid,
(VOID **) &ScsiIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
AllChildrenStopped = FALSE;
continue;
}
ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (ScsiIo);
//
// Close the child handle
//
if (ScsiIoDevice->ExtScsiSupport) {
Status = gBS->CloseProtocol (
Controller,
&gEfiExtScsiPassThruProtocolGuid,
This->DriverBindingHandle,
ChildHandleBuffer[Index]
);
} else {
Status = gBS->CloseProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
This->DriverBindingHandle,
ChildHandleBuffer[Index]
);
}
Status = gBS->UninstallMultipleProtocolInterfaces (
ChildHandleBuffer[Index],
&gEfiDevicePathProtocolGuid,
ScsiIoDevice->DevicePath,
&gEfiScsiIoProtocolGuid,
&ScsiIoDevice->ScsiIo,
NULL
);
if (EFI_ERROR (Status)) {
AllChildrenStopped = FALSE;
if (ScsiIoDevice->ExtScsiSupport) {
gBS->OpenProtocol (
Controller,
&gEfiExtScsiPassThruProtocolGuid,
&ScsiPassThru,
This->DriverBindingHandle,
ChildHandleBuffer[Index],
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
} else {
gBS->OpenProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
&ScsiPassThru,
This->DriverBindingHandle,
ChildHandleBuffer[Index],
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
}
} else {
FreePool (ScsiIoDevice);
}
}
if (!AllChildrenStopped) {
return EFI_DEVICE_ERROR;
}
return EFI_SUCCESS;
}
/**
Retrieves the device type information of the SCSI Controller.
@param This Protocol instance pointer.
@param DeviceType A pointer to the device type information retrieved from
the SCSI Controller.
@retval EFI_SUCCESS Retrieves the device type information successfully.
@retval EFI_INVALID_PARAMETER The DeviceType is NULL.
**/
EFI_STATUS
EFIAPI
ScsiGetDeviceType (
IN EFI_SCSI_IO_PROTOCOL *This,
OUT UINT8 *DeviceType
)
{
SCSI_IO_DEV *ScsiIoDevice;
if (DeviceType == NULL) {
return EFI_INVALID_PARAMETER;
}
ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);
*DeviceType = ScsiIoDevice->ScsiDeviceType;
return EFI_SUCCESS;
}
/**
Retrieves the device location in the SCSI channel.
@param This Protocol instance pointer.
@param Target A pointer to the Target ID of a SCSI device
on the SCSI channel.
@param Lun A pointer to the LUN of the SCSI device on
the SCSI channel.
@retval EFI_SUCCESS Retrieves the device location successfully.
@retval EFI_INVALID_PARAMETER The Target or Lun is NULL.
**/
EFI_STATUS
EFIAPI
ScsiGetDeviceLocation (
IN EFI_SCSI_IO_PROTOCOL *This,
IN OUT UINT8 **Target,
OUT UINT64 *Lun
)
{
SCSI_IO_DEV *ScsiIoDevice;
if (Target == NULL || Lun == NULL) {
return EFI_INVALID_PARAMETER;
}
ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);
CopyMem (*Target,&ScsiIoDevice->Pun, TARGET_MAX_BYTES);
*Lun = ScsiIoDevice->Lun;
return EFI_SUCCESS;
}
/**
Resets the SCSI Bus that the SCSI Controller is attached to.
@param This Protocol instance pointer.
@retval EFI_SUCCESS The SCSI bus is reset successfully.
@retval EFI_DEVICE_ERROR Errors encountered when resetting the SCSI bus.
@retval EFI_UNSUPPORTED The bus reset operation is not supported by the
SCSI Host Controller.
@retval EFI_TIMEOUT A timeout occurred while attempting to reset
the SCSI bus.
**/
EFI_STATUS
EFIAPI
ScsiResetBus (
IN EFI_SCSI_IO_PROTOCOL *This
)
{
SCSI_IO_DEV *ScsiIoDevice;
ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);
if (ScsiIoDevice->ExtScsiSupport){
return ScsiIoDevice->ExtScsiPassThru->ResetChannel (ScsiIoDevice->ExtScsiPassThru);
} else {
return ScsiIoDevice->ScsiPassThru->ResetChannel (ScsiIoDevice->ScsiPassThru);
}
}
/**
Resets the SCSI Controller that the device handle specifies.
@param This Protocol instance pointer.
@retval EFI_SUCCESS Reset the SCSI controller successfully.
@retval EFI_DEVICE_ERROR Errors are encountered when resetting the SCSI Controller.
@retval EFI_UNSUPPORTED The SCSI bus does not support a device reset operation.
@retval EFI_TIMEOUT A timeout occurred while attempting to reset the
SCSI Controller.
**/
EFI_STATUS
EFIAPI
ScsiResetDevice (
IN EFI_SCSI_IO_PROTOCOL *This
)
{
SCSI_IO_DEV *ScsiIoDevice;
UINT8 Target[TARGET_MAX_BYTES];
ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);
CopyMem (Target,&ScsiIoDevice->Pun, TARGET_MAX_BYTES);
if (ScsiIoDevice->ExtScsiSupport) {
return ScsiIoDevice->ExtScsiPassThru->ResetTargetLun (
ScsiIoDevice->ExtScsiPassThru,
Target,
ScsiIoDevice->Lun
);
} else {
return ScsiIoDevice->ScsiPassThru->ResetTarget (
ScsiIoDevice->ScsiPassThru,
ScsiIoDevice->Pun.ScsiId.Scsi,
ScsiIoDevice->Lun
);
}
}
/**
Sends a SCSI Request Packet to the SCSI Controller for execution.
@param This Protocol instance pointer.
@param CommandPacket The SCSI request packet to send to the SCSI
Controller specified by the device handle.
@param Event If the SCSI bus where the SCSI device is attached
does not support non-blocking I/O, then Event is
ignored, and blocking I/O is performed.
If Event is NULL, then blocking I/O is performed.
If Event is not NULL and non-blocking I/O is
supported, then non-blocking I/O is performed,
and Event will be signaled when the SCSI Request
Packet completes.
@retval EFI_SUCCESS The SCSI Request Packet was sent by the host
successfully, and TransferLength bytes were
transferred to/from DataBuffer.See
HostAdapterStatus, TargetStatus,
SenseDataLength, and SenseData in that order
for additional status information.
@retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
but the entire DataBuffer could not be transferred.
The actual number of bytes transferred is returned
in TransferLength. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
@retval EFI_NOT_READY The SCSI Request Packet could not be sent because
there are too many SCSI Command Packets already
queued.The caller may retry again later.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send
the SCSI Request Packet. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
@retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid.
The SCSI Request Packet was not sent, so no
additional status information is available.
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet
is not supported by the SCSI initiator(i.e., SCSI
Host Controller). The SCSI Request Packet was not
sent, so no additional status information is
available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
Request Packet to execute. See HostAdapterStatus,
TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
**/
EFI_STATUS
EFIAPI
ScsiExecuteSCSICommand (
IN EFI_SCSI_IO_PROTOCOL *This,
IN OUT EFI_SCSI_IO_SCSI_REQUEST_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
)
{
SCSI_IO_DEV *ScsiIoDevice;
EFI_STATUS Status;
UINT8 Target[TARGET_MAX_BYTES];
EFI_EVENT PacketEvent;
EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *ExtRequestPacket;
SCSI_EVENT_DATA EventData;
PacketEvent = NULL;
if (Packet == NULL) {
return EFI_INVALID_PARAMETER;
}
ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);
CopyMem (Target,&ScsiIoDevice->Pun, TARGET_MAX_BYTES);
if (ScsiIoDevice->ExtScsiSupport) {
ExtRequestPacket = (EFI_EXT_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *) Packet;
Status = ScsiIoDevice->ExtScsiPassThru->PassThru (
ScsiIoDevice->ExtScsiPassThru,
Target,
ScsiIoDevice->Lun,
ExtRequestPacket,
Event
);
} else {
mWorkingBuffer = AllocatePool (sizeof(EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET));
if (mWorkingBuffer == NULL) {
return EFI_DEVICE_ERROR;
}
//
// Convert package into EFI1.0, EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET.
//
Status = ScsiioToPassThruPacket(Packet, (EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET*)mWorkingBuffer);
if (EFI_ERROR(Status)) {
FreePool(mWorkingBuffer);
return Status;
}
if (((ScsiIoDevice->ScsiPassThru->Mode->Attributes & EFI_SCSI_PASS_THRU_ATTRIBUTES_NONBLOCKIO) != 0) && (Event != NULL)) {
EventData.Data1 = (VOID*)Packet;
EventData.Data2 = Event;
//
// Create Event
//
Status = gBS->CreateEvent (
EVT_NOTIFY_SIGNAL,
TPL_CALLBACK,
NotifyFunction,
&EventData,
&PacketEvent
);
if (EFI_ERROR(Status)) {
FreePool(mWorkingBuffer);
return Status;
}
Status = ScsiIoDevice->ScsiPassThru->PassThru (
ScsiIoDevice->ScsiPassThru,
ScsiIoDevice->Pun.ScsiId.Scsi,
ScsiIoDevice->Lun,
mWorkingBuffer,
PacketEvent
);
if (EFI_ERROR(Status)) {
FreePool(mWorkingBuffer);
gBS->CloseEvent(PacketEvent);
return Status;
}
} else {
//
// If there's no event or SCSI Device doesn't support NON-BLOCKING, just convert
// EFI1.0 PassThru packet back to UEFI2.0 SCSI IO Packet.
//
Status = ScsiIoDevice->ScsiPassThru->PassThru (
ScsiIoDevice->ScsiPassThru,
ScsiIoDevice->Pun.ScsiId.Scsi,
ScsiIoDevice->Lun,
mWorkingBuffer,
Event
);
if (EFI_ERROR(Status)) {
FreePool(mWorkingBuffer);
return Status;
}
PassThruToScsiioPacket((EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET*)mWorkingBuffer,Packet);
//
// After converting EFI1.0 PassThru Packet back to UEFI2.0 SCSI IO Packet,
// free mWorkingBuffer.
//
FreePool(mWorkingBuffer);
}
}
return Status;
}
/**
Scan SCSI Bus to discover the device, and attach ScsiIoProtocol to it.
@param This Protocol instance pointer
@param Controller Controller handle
@param TargetId Tartget to be scanned
@param Lun The Lun of the SCSI device on the SCSI channel.
@param ScsiBusDev The pointer of SCSI_BUS_DEVICE
@retval EFI_SUCCESS Successfully to discover the device and attach
ScsiIoProtocol to it.
@retval EFI_OUT_OF_RESOURCES Fail to discover the device.
**/
EFI_STATUS
EFIAPI
ScsiScanCreateDevice (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN SCSI_TARGET_ID *TargetId,
IN UINT64 Lun,
IN OUT SCSI_BUS_DEVICE *ScsiBusDev
)
{
EFI_STATUS Status;
SCSI_IO_DEV *ScsiIoDevice;
EFI_DEVICE_PATH_PROTOCOL *ScsiDevicePath;
ScsiIoDevice = AllocateZeroPool (sizeof (SCSI_IO_DEV));
if (ScsiIoDevice == NULL) {
return EFI_OUT_OF_RESOURCES;
}
ScsiIoDevice->Signature = SCSI_IO_DEV_SIGNATURE;
CopyMem(&ScsiIoDevice->Pun, TargetId, TARGET_MAX_BYTES);
ScsiIoDevice->Lun = Lun;
if (ScsiBusDev->ExtScsiSupport) {
ScsiIoDevice->ExtScsiPassThru = ScsiBusDev->ExtScsiInterface;
ScsiIoDevice->ExtScsiSupport = TRUE;
ScsiIoDevice->ScsiIo.IoAlign = ScsiIoDevice->ExtScsiPassThru->Mode->IoAlign;
} else {
ScsiIoDevice->ScsiPassThru = ScsiBusDev->ScsiInterface;
ScsiIoDevice->ExtScsiSupport = FALSE;
ScsiIoDevice->ScsiIo.IoAlign = ScsiIoDevice->ScsiPassThru->Mode->IoAlign;
}
ScsiIoDevice->ScsiIo.GetDeviceType = ScsiGetDeviceType;
ScsiIoDevice->ScsiIo.GetDeviceLocation = ScsiGetDeviceLocation;
ScsiIoDevice->ScsiIo.ResetBus = ScsiResetBus;
ScsiIoDevice->ScsiIo.ResetDevice = ScsiResetDevice;
ScsiIoDevice->ScsiIo.ExecuteScsiCommand = ScsiExecuteSCSICommand;
if (!DiscoverScsiDevice (ScsiIoDevice)) {
FreePool (ScsiIoDevice);
return EFI_OUT_OF_RESOURCES;
}
//
// Set Device Path
//
ScsiDevicePath = NULL;
if (ScsiIoDevice->ExtScsiSupport){
Status = ScsiIoDevice->ExtScsiPassThru->BuildDevicePath (
ScsiIoDevice->ExtScsiPassThru,
&ScsiIoDevice->Pun.ScsiId.ExtScsi[0],
ScsiIoDevice->Lun,
&ScsiDevicePath
);
if (Status == EFI_OUT_OF_RESOURCES) {
FreePool (ScsiIoDevice);
return Status;
}
} else {
Status = ScsiIoDevice->ScsiPassThru->BuildDevicePath (
ScsiIoDevice->ScsiPassThru,
ScsiIoDevice->Pun.ScsiId.Scsi,
ScsiIoDevice->Lun,
&ScsiDevicePath
);
if (Status == EFI_OUT_OF_RESOURCES) {
FreePool (ScsiIoDevice);
return Status;
}
}
ScsiIoDevice->DevicePath = AppendDevicePathNode (
ScsiBusDev->DevicePath,
ScsiDevicePath
);
//
// The memory space for ScsiDevicePath is allocated in
// ScsiPassThru->BuildDevicePath() function; It is no longer used
// after EfiAppendDevicePathNode,so free the memory it occupies.
//
FreePool (ScsiDevicePath);
if (ScsiIoDevice->DevicePath == NULL) {
FreePool (ScsiIoDevice);
return EFI_OUT_OF_RESOURCES;
}
Status = gBS->InstallMultipleProtocolInterfaces (
&ScsiIoDevice->Handle,
&gEfiDevicePathProtocolGuid,
ScsiIoDevice->DevicePath,
&gEfiScsiIoProtocolGuid,
&ScsiIoDevice->ScsiIo,
NULL
);
if (EFI_ERROR (Status)) {
FreePool (ScsiIoDevice);
return EFI_OUT_OF_RESOURCES;
} else {
if (ScsiBusDev->ExtScsiSupport) {
gBS->OpenProtocol (
Controller,
&gEfiExtScsiPassThruProtocolGuid,
(VOID **) &(ScsiBusDev->ExtScsiInterface),
This->DriverBindingHandle,
ScsiIoDevice->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
} else {
gBS->OpenProtocol (
Controller,
&gEfiScsiPassThruProtocolGuid,
(VOID **) &(ScsiBusDev->ScsiInterface),
This->DriverBindingHandle,
ScsiIoDevice->Handle,
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER
);
}
}
return EFI_SUCCESS;
}
/**
Discovery SCSI Device
@param ScsiIoDevice The pointer of SCSI_IO_DEV
@retval TRUE Find SCSI Device and verify it.
@retval FALSE Unable to find SCSI Device.
**/
BOOLEAN
DiscoverScsiDevice (
IN OUT SCSI_IO_DEV *ScsiIoDevice
)
{
EFI_STATUS Status;
UINT32 InquiryDataLength;
UINT8 SenseDataLength;
UINT8 HostAdapterStatus;
UINT8 TargetStatus;
EFI_SCSI_SENSE_DATA SenseData;
EFI_SCSI_INQUIRY_DATA InquiryData;
HostAdapterStatus = 0;
TargetStatus = 0;
//
// Using Inquiry command to scan for the device
//
InquiryDataLength = sizeof (EFI_SCSI_INQUIRY_DATA);
SenseDataLength = sizeof (EFI_SCSI_SENSE_DATA);
Status = ScsiInquiryCommand (
&ScsiIoDevice->ScsiIo,
EFI_TIMER_PERIOD_SECONDS (1),
(VOID *) &SenseData,
&SenseDataLength,
&HostAdapterStatus,
&TargetStatus,
(VOID *) &InquiryData,
&InquiryDataLength,
FALSE
);
if (EFI_ERROR (Status)) {
return FALSE;
}
//
// Retrieved inquiry data successfully
//
if ((InquiryData.Peripheral_Qualifier != 0) &&
(InquiryData.Peripheral_Qualifier != 3)) {
return FALSE;
}
if (InquiryData.Peripheral_Qualifier == 3) {
if (InquiryData.Peripheral_Type != 0x1f) {
return FALSE;
}
}
if (0x1e >= InquiryData.Peripheral_Type && InquiryData.Peripheral_Type >= 0xa) {
return FALSE;
}
//
// valid device type and peripheral qualifier combination.
//
ScsiIoDevice->ScsiDeviceType = InquiryData.Peripheral_Type;
ScsiIoDevice->RemovableDevice = InquiryData.RMB;
if (InquiryData.Version == 0) {
ScsiIoDevice->ScsiVersion = 0;
} else {
//
// ANSI-approved version
//
ScsiIoDevice->ScsiVersion = (UINT8) (InquiryData.Version & 0x03);
}
return TRUE;
}
/**
Convert EFI_SCSI_IO_SCSI_REQUEST_PACKET packet to EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET packet.
@param Packet The pointer of EFI_SCSI_IO_SCSI_REQUEST_PACKET
@param CommandPacket The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET
**/
EFI_STATUS
EFIAPI
ScsiioToPassThruPacket (
IN EFI_SCSI_IO_SCSI_REQUEST_PACKET *Packet,
OUT EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *CommandPacket
)
{
//
//EFI 1.10 doesn't support Bi-Direction Command.
//
if (Packet->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_BIDIRECTIONAL) {
return EFI_UNSUPPORTED;
}
ZeroMem (CommandPacket, sizeof (EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET));
CommandPacket->Timeout = Packet->Timeout;
CommandPacket->Cdb = Packet->Cdb;
CommandPacket->CdbLength = Packet->CdbLength;
CommandPacket->DataDirection = Packet->DataDirection;
CommandPacket->HostAdapterStatus = Packet->HostAdapterStatus;
CommandPacket->TargetStatus = Packet->TargetStatus;
CommandPacket->SenseData = Packet->SenseData;
CommandPacket->SenseDataLength = Packet->SenseDataLength;
if (Packet->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_READ) {
CommandPacket->DataBuffer = Packet->InDataBuffer;
CommandPacket->TransferLength = Packet->InTransferLength;
} else if (Packet->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_WRITE) {
CommandPacket->DataBuffer = Packet->OutDataBuffer;
CommandPacket->TransferLength = Packet->OutTransferLength;
}
return EFI_SUCCESS;
}
/**
Convert EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET packet to EFI_SCSI_IO_SCSI_REQUEST_PACKET packet.
@param ScsiPacket The pointer of EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET
@param Packet The pointer of EFI_SCSI_IO_SCSI_REQUEST_PACKET
**/
EFI_STATUS
EFIAPI
PassThruToScsiioPacket (
IN EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *ScsiPacket,
OUT EFI_SCSI_IO_SCSI_REQUEST_PACKET *Packet
)
{
Packet->Timeout = ScsiPacket->Timeout;
Packet->Cdb = ScsiPacket->Cdb;
Packet->CdbLength = ScsiPacket->CdbLength;
Packet->DataDirection = ScsiPacket->DataDirection;
Packet->HostAdapterStatus = ScsiPacket->HostAdapterStatus;
Packet->TargetStatus = ScsiPacket->TargetStatus;
Packet->SenseData = ScsiPacket->SenseData;
Packet->SenseDataLength = ScsiPacket->SenseDataLength;
if (ScsiPacket->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_READ) {
Packet->InDataBuffer = ScsiPacket->DataBuffer;
Packet->InTransferLength = ScsiPacket->TransferLength;
} else if (Packet->DataDirection == EFI_SCSI_IO_DATA_DIRECTION_WRITE) {
Packet->OutDataBuffer = ScsiPacket->DataBuffer;
Packet->OutTransferLength = ScsiPacket->TransferLength;
}
return EFI_SUCCESS;
}
/**
Notify Function in which convert EFI1.0 PassThru Packet back to UEF2.0
SCSI IO Packet.
@param Event The instance of EFI_EVENT.
@param Context The parameter passed in.
**/
VOID
EFIAPI
NotifyFunction (
IN EFI_EVENT Event,
IN VOID *Context
)
{
EFI_SCSI_IO_SCSI_REQUEST_PACKET *Packet;
EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET *ScsiPacket;
EFI_EVENT CallerEvent;
SCSI_EVENT_DATA *PassData;
PassData = (SCSI_EVENT_DATA*)Context;
Packet = (EFI_SCSI_IO_SCSI_REQUEST_PACKET *)PassData->Data1;
ScsiPacket = (EFI_SCSI_PASS_THRU_SCSI_REQUEST_PACKET*)mWorkingBuffer;
//
// Convert EFI1.0 PassThru packet to UEFI2.0 SCSI IO Packet.
//
PassThruToScsiioPacket(ScsiPacket, Packet);
//
// After converting EFI1.0 PassThru Packet back to UEFI2.0 SCSI IO Packet,
// free mWorkingBuffer.
//
gBS->FreePool(mWorkingBuffer);
//
// Signal Event to tell caller to pick up UEFI2.0 SCSI IO Packet.
//
CallerEvent = PassData->Data2;
gBS->CloseEvent(Event);
gBS->SignalEvent(CallerEvent);
}