audk/MdeModulePkg/Universal/SecurityStubDxe/SecurityStub.c

217 lines
9.4 KiB
C

/** @file
This driver produces Security2 and Security architectural protocol based on SecurityManagementLib.
Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Uefi.h>
#include <Protocol/Security.h>
#include <Protocol/Security2.h>
#include <Library/DebugLib.h>
#include <Library/UefiBootServicesTableLib.h>
#include <Library/UefiDriverEntryPoint.h>
#include <Library/SecurityManagementLib.h>
#include "Defer3rdPartyImageLoad.h"
//
// Handle for the Security Architectural Protocol instance produced by this driver
//
EFI_HANDLE mSecurityArchProtocolHandle = NULL;
/**
The EFI_SECURITY_ARCH_PROTOCOL (SAP) is used to abstract platform-specific
policy from the DXE core response to an attempt to use a file that returns a
given status for the authentication check from the section extraction protocol.
The possible responses in a given SAP implementation may include locking
flash upon failure to authenticate, attestation logging for all signed drivers,
and other exception operations. The File parameter allows for possible logging
within the SAP of the driver.
If File is NULL, then EFI_INVALID_PARAMETER is returned.
If the file specified by File with an authentication status specified by
AuthenticationStatus is safe for the DXE Core to use, then EFI_SUCCESS is returned.
If the file specified by File with an authentication status specified by
AuthenticationStatus is not safe for the DXE Core to use under any circumstances,
then EFI_ACCESS_DENIED is returned.
If the file specified by File with an authentication status specified by
AuthenticationStatus is not safe for the DXE Core to use right now, but it
might be possible to use it at a future time, then EFI_SECURITY_VIOLATION is
returned.
@param This The EFI_SECURITY_ARCH_PROTOCOL instance.
@param AuthenticationStatus
This is the authentication type returned from the Section
Extraction protocol. See the Section Extraction Protocol
Specification for details on this type.
@param File This is a pointer to the device path of the file that is
being dispatched. This will optionally be used for logging.
@retval EFI_SUCCESS Do nothing and return success.
@retval EFI_INVALID_PARAMETER File is NULL.
**/
EFI_STATUS
EFIAPI
SecurityStubAuthenticateState (
IN CONST EFI_SECURITY_ARCH_PROTOCOL *This,
IN UINT32 AuthenticationStatus,
IN CONST EFI_DEVICE_PATH_PROTOCOL *File
)
{
EFI_STATUS Status;
Status = ExecuteSecurity2Handlers (EFI_AUTH_OPERATION_AUTHENTICATION_STATE,
AuthenticationStatus,
File,
NULL,
0,
FALSE
);
if (Status == EFI_SUCCESS) {
Status = ExecuteSecurityHandlers (AuthenticationStatus, File);
}
return Status;
}
/**
The DXE Foundation uses this service to measure and/or verify a UEFI image.
This service abstracts the invocation of Trusted Computing Group (TCG) measured boot, UEFI
Secure boot, and UEFI User Identity infrastructure. For the former two, the DXE Foundation
invokes the FileAuthentication() with a DevicePath and corresponding image in
FileBuffer memory. The TCG measurement code will record the FileBuffer contents into the
appropriate PCR. The image verification logic will confirm the integrity and provenance of the
image in FileBuffer of length FileSize . The origin of the image will be DevicePath in
these cases.
If the FileBuffer is NULL, the interface will determine if the DevicePath can be connected
in order to support the User Identification policy.
@param This The EFI_SECURITY2_ARCH_PROTOCOL instance.
@param File A pointer to the device path of the file that is
being dispatched. This will optionally be used for logging.
@param FileBuffer A pointer to the buffer with the UEFI file image.
@param FileSize The size of the file.
@param BootPolicy A boot policy that was used to call LoadImage() UEFI service. If
FileAuthentication() is invoked not from the LoadImage(),
BootPolicy must be set to FALSE.
@retval EFI_SUCCESS The file specified by DevicePath and non-NULL
FileBuffer did authenticate, and the platform policy dictates
that the DXE Foundation may use the file.
@retval EFI_SUCCESS The device path specified by NULL device path DevicePath
and non-NULL FileBuffer did authenticate, and the platform
policy dictates that the DXE Foundation may execute the image in
FileBuffer.
@retval EFI_SUCCESS FileBuffer is NULL and current user has permission to start
UEFI device drivers on the device path specified by DevicePath.
@retval EFI_SECURITY_VIOLATION The file specified by DevicePath and FileBuffer did not
authenticate, and the platform policy dictates that the file should be
placed in the untrusted state. The image has been added to the file
execution table.
@retval EFI_ACCESS_DENIED The file specified by File and FileBuffer did not
authenticate, and the platform policy dictates that the DXE
Foundation many not use File.
@retval EFI_SECURITY_VIOLATION FileBuffer is NULL and the user has no
permission to start UEFI device drivers on the device path specified
by DevicePath.
@retval EFI_SECURITY_VIOLATION FileBuffer is not NULL and the user has no permission to load
drivers from the device path specified by DevicePath. The
image has been added into the list of the deferred images.
**/
EFI_STATUS
EFIAPI
Security2StubAuthenticate (
IN CONST EFI_SECURITY2_ARCH_PROTOCOL *This,
IN CONST EFI_DEVICE_PATH_PROTOCOL *File,
IN VOID *FileBuffer,
IN UINTN FileSize,
IN BOOLEAN BootPolicy
)
{
EFI_STATUS Status;
if (FileBuffer != NULL) {
Status = Defer3rdPartyImageLoad (File, BootPolicy);
if (EFI_ERROR (Status)) {
return Status;
}
}
return ExecuteSecurity2Handlers (EFI_AUTH_OPERATION_VERIFY_IMAGE |
EFI_AUTH_OPERATION_DEFER_IMAGE_LOAD |
EFI_AUTH_OPERATION_MEASURE_IMAGE |
EFI_AUTH_OPERATION_CONNECT_POLICY,
0,
File,
FileBuffer,
FileSize,
BootPolicy
);
}
//
// Security2 and Security Architectural Protocol instance produced by this driver
//
EFI_SECURITY_ARCH_PROTOCOL mSecurityStub = {
SecurityStubAuthenticateState
};
EFI_SECURITY2_ARCH_PROTOCOL mSecurity2Stub = {
Security2StubAuthenticate
};
/**
Installs Security2 and Security Architectural Protocol.
@param ImageHandle The image handle of this driver.
@param SystemTable A pointer to the EFI System Table.
@retval EFI_SUCCESS Install the sample Security Architectural Protocol successfully.
**/
EFI_STATUS
EFIAPI
SecurityStubInitialize (
IN EFI_HANDLE ImageHandle,
IN EFI_SYSTEM_TABLE *SystemTable
)
{
EFI_STATUS Status;
//
// Make sure the Security Architectural Protocol is not already installed in the system
//
ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiSecurity2ArchProtocolGuid);
ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gEfiSecurityArchProtocolGuid);
//
// Install the Security Architectural Protocol onto a new handle
//
Status = gBS->InstallMultipleProtocolInterfaces (
&mSecurityArchProtocolHandle,
&gEfiSecurity2ArchProtocolGuid,
&mSecurity2Stub,
&gEfiSecurityArchProtocolGuid,
&mSecurityStub,
NULL
);
ASSERT_EFI_ERROR (Status);
Defer3rdPartyImageLoadInitialize ();
return EFI_SUCCESS;
}