audk/MdePkg/Include/Library/FvbServiceLib.h

309 lines
14 KiB
C

/** @file
Firmeware Volume BLock Service Library
Copyright (c) 2006 - 2007, Intel Corporation.<BR>
All rights reserved. This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __FVB_SERVICE_LIB_H__
#define __FVB_SERVICE_LIB_H__
/**
Reads specified number of bytes into a buffer from the specified block.
The EfiFvbReadBlock() function reads the requested number of bytes from
the requested block in the specified firmware volume and stores them in
the provided buffer. Implementations should be mindful that the firmware
volume might be in the ReadDisabled state. If it is in this state, the
EfiFvbReadBlock() function must return the status code EFI_ACCESS_DENIED
without modifying the contents of the buffer.
The EfiFvbReadBlock() function must also prevent spanning block boundaries.
If a read is requested that would span a block boundary, the read must read
up to the boundary but not beyond. The output parameter NumBytes must be
set to correctly indicate the number of bytes actually read.
The caller must be aware that a read may be partially completed.
If NumBytes is NULL, then ASSERT().
If Buffer is NULL, then ASSERT().
@param[in] Instance The FV instance to be read from.
@param[in] Lba The logical block address to be read from
@param[in] Offset The offset relative to the block, at which to begin reading.
@param[in, out] NumBytes Pointer to a UINTN. On input, *NumBytes contains the total
size of the buffer. On output, it contains the actual number
of bytes read.
@param[out] Buffer Pointer to a caller allocated buffer that will be
used to hold the data read.
@retval EFI_SUCCESS The firmware volume was read successfully and contents are in Buffer.
@retval EFI_BAD_BUFFER_SIZE Read attempted across an LBA boundary. On output, NumBytes contains the total number of bytes returned in Buffer.
@retval EFI_ACCESS_DENIED The firmware volume is in the ReadDisabled state.
@retval EFI_DEVICE_ERROR The block device is not functioning correctly and could not be read.
@retval EFI_INVALID_PARAMETER Invalid parameter, Instance is larger than the max FVB number. Lba index is larger than the last block of the firmware volume. Offset is larger than the block size.
**/
EFI_STATUS
EFIAPI
EfiFvbReadBlock (
IN UINTN Instance,
IN EFI_LBA Lba,
IN UINTN Offset,
IN OUT UINTN *NumBytes,
OUT UINT8 *Buffer
);
/**
Writes specified number of bytes from the input buffer to the block
The EfiFvbWriteBlock() function writes the specified number of bytes
from the provided buffer to the specified block and offset in the
requested firmware volume.
If the firmware volume is sticky write, the caller must ensure that
all the bits of the specified range to write are in the EFI_FVB_ERASE_POLARITY
state before calling the EfiFvbWriteBlock() function, or else the
result will be unpredictable. This unpredictability arises because,
for a sticky-write firmware volume, a write may negate a bit in the
EFI_FVB_ERASE_POLARITY state but it cannot flip it back again. In
general, before calling the EfiFvbWriteBlock() function, the caller
should call the EfiFvbEraseBlock() function first to erase the specified
block to write. A block erase cycle will transition bits from the
(NOT)EFI_FVB_ERASE_POLARITY state back to the EFI_FVB_ERASE_POLARITY state.
Implementations should be mindful that the firmware volume might be
in the WriteDisabled state. If it is in this state, the EfiFvbWriteBlock()
function must return the status code EFI_ACCESS_DENIED without modifying
the contents of the firmware volume.
The EfiFvbWriteBlock() function must also prevent spanning block boundaries.
If a write is requested that spans a block boundary, the write must store
up to the boundary but not beyond. The output parameter NumBytes must be
set to correctly indicate the number of bytes actually written. The caller
must be aware that a write may be partially completed.
All writes, partial or otherwise, must be fully flushed to the hardware
before the EfiFvbWriteBlock() function returns.
If NumBytes is NULL, then ASSERT().
@param Instance The FV instance to be written to
@param Lba The starting logical block index to write to
@param Offset The offset relative to the block, at which to begin writting.
@param NumBytes Pointer to a UINTN. On input, *NumBytes contains
the total size of the buffer. On output, it contains
the actual number of bytes written.
@param Buffer Pointer to a caller allocated buffer that contains
the source for the write
@retval EFI_SUCCESS The firmware volume was written successfully.
@retval EFI_BAD_BUFFER_SIZE The write was attempted across an LBA boundary.
On output, NumBytes contains the total number of bytes actually written.
@retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
@retval EFI_DEVICE_ERROR The block device is malfunctioning and could not be written.
@retval EFI_INVALID_PARAMETER Invalid parameter, Instance is larger than the max FVB number.
Lba index is larger than the last block of the firmware volume.
Offset is larger than the block size.
**/
EFI_STATUS
EFIAPI
EfiFvbWriteBlock (
IN UINTN Instance,
IN EFI_LBA Lba,
IN UINTN Offset,
IN OUT UINTN *NumBytes,
IN UINT8 *Buffer
);
/**
Erases and initializes a firmware volume block.
The EfiFvbEraseBlock() function erases one block specified by Lba.
Implementations should be mindful that the firmware volume might
be in the WriteDisabled state. If it is in this state, the EfiFvbEraseBlock()
function must return the status code EFI_ACCESS_DENIED without
modifying the contents of the firmware volume. If Instance is
larger than the max FVB number, or Lba index is larger than the
last block of the firmware volume, this function return the status
code EFI_INVALID_PARAMETER.
All calls to EfiFvbEraseBlock() must be fully flushed to the
hardware before this function returns.
@param[in] Instance The FV instance to be erased.
@param[in] Lba The logical block index to be erased from.
@retval EFI_SUCCESS The erase request was successfully completed.
@retval EFI_ACCESS_DENIED The firmware volume is in the WriteDisabled state.
@retval EFI_DEVICE_ERROR The block device is not functioning correctly and
could not be written. The firmware device may
have been partially erased.
@retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max
FVB number. Lba index is larger than the last block
of the firmware volume.
**/
EFI_STATUS
EFIAPI
EfiFvbEraseBlock (
IN UINTN Instance,
IN EFI_LBA Lba
);
/**
Retrieves the attributes and current settings of the specified block,
returns resulting attributes in output parameter.
The EfiFvbGetAttributes() function retrieves the attributes and current
settings of the block specified by Instance. If Instance is larger than
the max FVB number, this function returns the status code EFI_INVALID_PARAMETER.
If Attributes is NULL, then ASSERT().
@param[in] Instance The FV instance to be operated.
@param[out] Attributes Pointer to EFI_FVB_ATTRIBUTES_2 in which the
attributes and current settings are returned.
@retval EFI_EFI_SUCCESS The firmware volume attributes were returned.
@retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
**/
EFI_STATUS
EFIAPI
EfiFvbGetVolumeAttributes (
IN UINTN Instance,
OUT EFI_FVB_ATTRIBUTES_2 *Attributes
);
/**
Modify the attributes and current settings of the specified block
according to the input parameter.
The EfiFvbSetAttributes() function sets configurable firmware volume
attributes and returns the new settings of the firmware volume specified
by Instance. If Instance is larger than the max FVB number, this function
returns the status code EFI_INVALID_PARAMETER.
If Attributes is NULL, then ASSERT().
@param[in] Instance The FV instance to be operated.
@param[in, out]Attributes On input, Attributes is a pointer to EFI_FVB_ATTRIBUTES_2
that contains the desired firmware volume settings.
On successful return, it contains the new settings of the firmware volume.
@retval EFI_EFI_SUCCESS The firmware volume attributes were modified successfully.
@retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
**/
EFI_STATUS
EFIAPI
EfiFvbSetVolumeAttributes (
IN UINTN Instance,
IN OUT EFI_FVB_ATTRIBUTES_2 *Attributes
);
/**
Retrieves the physical address of the specified memory mapped FV.
Retrieve the base address of a memory-mapped firmware volume specified by Instance.
If Instance is larger than the max FVB number, this function returns the status
code EFI_INVALID_PARAMETER.
If BaseAddress is NULL, then ASSERT().
@param[in] Instance The FV instance to be operated.
@param[out] BaseAddress Pointer to a caller allocated EFI_PHYSICAL_ADDRESS
that on successful return, contains the base address
of the firmware volume.
@retval EFI_EFI_SUCCESS The firmware volume base address is returned.
@retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
**/
EFI_STATUS
EFIAPI
EfiFvbGetPhysicalAddress (
IN UINTN Instance,
OUT EFI_PHYSICAL_ADDRESS *BaseAddress
);
/**
Retrieve the block size of the specified fv.
The EfiFvbGetBlockSize() function retrieves the size of the requested block.
It also returns the number of additional blocks with the identical size.
If Instance is larger than the max FVB number, or Lba index is larger than
the last block of the firmware volume, this function return the status code
EFI_INVALID_PARAMETER.
If BlockSize is NULL, then ASSERT().
If NumOfBlocks is NULL, then ASSERT().
@param[in] Instance The FV instance to be operated.
@param[in] Lba Indicates which block to return the size for.
@param[out] BlockSize Pointer to a caller-allocated UINTN in which the
size of the block is returned.
@param[out] NumOfBlocks Pointer to a caller-allocated UINTN in which the
number of consecutive blocks, starting with Lba,
is returned. All blocks in this range have a size of BlockSize.
@retval EFI_EFI_SUCCESS The firmware volume base address is returned.
@retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
Lba index is larger than the last block of the firmware volume.
**/
EFI_STATUS
EFIAPI
EfiFvbGetBlockSize (
IN UINTN Instance,
IN EFI_LBA Lba,
OUT UINTN *BlockSize,
OUT UINTN *NumOfBlocks
);
/**
Erases and initializes a specified range of a firmware volume.
The EfiFvbEraseCustomBlockRange() function erases the specified range in the firmware
volume index by Instance. If Instance is larger than the max FVB number, StartLba or
LastLba index is larger than the last block of the firmware volume, StartLba > LastLba
or StartLba equal to LastLba but OffsetStartLba > OffsetLastLba, this function return
the status code EFI_INVALID_PARAMETER.
@param[in] Instance The FV instance to be operated.
@param[in] StartLba The starting logical block index to be erased.
@param[in] OffsetStartLba Offset into the starting block at which to
begin erasing.
@param[in] LastLba The last logical block index to be erased.
@param[in] OffsetLastLba Offset into the last block at which to end erasing.
@retval EFI_EFI_SUCCESS Successfully erase custom block range
@retval EFI_INVALID_PARAMETER Invalid parameter. Instance is larger than the max FVB number.
@retval EFI_UNSUPPORTED Firmware volume block device has no this capability.
**/
EFI_STATUS
EFIAPI
EfiFvbEraseCustomBlockRange (
IN UINTN Instance,
IN EFI_LBA StartLba,
IN UINTN OffsetStartLba,
IN EFI_LBA LastLba,
IN UINTN OffsetLastLba
);
#endif