mirror of https://github.com/acidanthera/audk.git
324 lines
12 KiB
C
324 lines
12 KiB
C
/** @file
|
|
Header file for the PCH SPI Common Driver.
|
|
|
|
Copyright (c) 2013-2015 Intel Corporation.
|
|
|
|
This program and the accompanying materials
|
|
are licensed and made available under the terms and conditions of the BSD License
|
|
which accompanies this distribution. The full text of the license may be found at
|
|
http://opensource.org/licenses/bsd-license.php
|
|
|
|
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
|
|
|
|
**/
|
|
#ifndef _SPI_COMMON_H_
|
|
#define _SPI_COMMON_H_
|
|
|
|
#include "Protocol/Spi.h"
|
|
#include <Library/PciLib.h>
|
|
#include <Library/IoLib.h>
|
|
#include <Library/DebugLib.h>
|
|
#include <Library/PcdLib.h>
|
|
#include <Library/BaseMemoryLib.h>
|
|
#include <Library/IntelQNCLib.h>
|
|
#include <Library/QNCAccessLib.h>
|
|
#include <Uefi/UefiBaseType.h>
|
|
|
|
//
|
|
// Maximum time allowed while waiting the SPI cycle to complete
|
|
// Wait Time = 6 seconds = 6000000 microseconds
|
|
// Wait Period = 10 microseconds
|
|
//
|
|
#define WAIT_TIME 6000000
|
|
#define WAIT_PERIOD 10
|
|
//
|
|
// PCH Required SPI Commands -------- COMMAND SET I ------------
|
|
// SPI flash device must support in order to be compatible with PCH
|
|
//
|
|
#define PCH_SPI_COMMAND_PROGRAM_BYTE 0x02
|
|
#define PCH_SPI_COMMAND_READ_DATA 0x03
|
|
#define PCH_SPI_COMMAND_WRITE_DISABLE 0x04
|
|
#define PCH_SPI_COMMAND_READ_STATUS 0x05
|
|
#define PCH_SPI_COMMAND_WRITE_ENABLE 0x06
|
|
#define PCH_SPI_COMMAND_FAST_READ 0x0B
|
|
#define PCH_SPI_COMMAND_READ_ID 0x9F
|
|
#define PCH_SPI_COMMAND_DUAL_FAST_READ 0x3B // Dual Output Fast Read
|
|
|
|
//
|
|
// Need to support at least one of the following two kinds of size of sector for erasing
|
|
//
|
|
#define PCH_SPI_COMMAND_4KB_ERASE 0x20
|
|
#define PCH_SPI_COMMAND_64KB_ERASE 0xD8
|
|
//
|
|
// Recommended SPI Commands -------- COMMAND SET II ------------
|
|
// SPI flash device best to support
|
|
//
|
|
#define PCH_SPI_COMMAND_WRITE_STATUS 0x01
|
|
#define PCH_SPI_COMMAND_FULL_CHIP_ERASE 0xC7
|
|
|
|
//
|
|
// Private data structure definitions for the driver
|
|
//
|
|
#define PCH_SPI_PRIVATE_DATA_SIGNATURE SIGNATURE_32 ('P', 'S', 'P', 'I')
|
|
|
|
typedef struct {
|
|
UINTN Signature;
|
|
EFI_HANDLE Handle;
|
|
EFI_SPI_PROTOCOL SpiProtocol;
|
|
SPI_INIT_TABLE SpiInitTable;
|
|
UINTN PchRootComplexBar;
|
|
BOOLEAN InitDone; // Set to TRUE on SpiProtocolInit SUCCESS.
|
|
SPI_INIT_INFO InitInfo;
|
|
} SPI_INSTANCE;
|
|
|
|
#define SPI_INSTANCE_FROM_SPIPROTOCOL(a) CR (a, SPI_INSTANCE, SpiProtocol, PCH_SPI_PRIVATE_DATA_SIGNATURE)
|
|
|
|
//
|
|
// Function prototypes used by the SPI protocol.
|
|
//
|
|
EFI_STATUS
|
|
SpiProtocolConstructor (
|
|
SPI_INSTANCE *SpiInstance
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Initialize an SPI protocol instance.
|
|
The function will assert in debug if PCH RCBA has not been initialized
|
|
|
|
Arguments:
|
|
|
|
SpiInstance - Pointer to SpiInstance to initialize
|
|
|
|
Returns:
|
|
|
|
EFI_SUCCESS The protocol instance was properly initialized
|
|
EFI_UNSUPPORTED The PCH is not supported by this module
|
|
|
|
--*/
|
|
;
|
|
|
|
EFI_STATUS
|
|
EFIAPI
|
|
SpiProtocolInit (
|
|
IN EFI_SPI_PROTOCOL *This,
|
|
IN SPI_INIT_TABLE *InitTable
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Initialize the host controller to execute SPI command.
|
|
|
|
Arguments:
|
|
|
|
This Pointer to the EFI_SPI_PROTOCOL instance.
|
|
InitTable Initialization data to be programmed into the SPI host controller.
|
|
|
|
Returns:
|
|
|
|
EFI_SUCCESS Initialization completed.
|
|
EFI_ACCESS_DENIED The SPI static configuration interface has been locked-down.
|
|
EFI_INVALID_PARAMETER Bad input parameters.
|
|
--*/
|
|
;
|
|
|
|
EFI_STATUS
|
|
EFIAPI
|
|
SpiProtocolLock (
|
|
IN EFI_SPI_PROTOCOL *This
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Lock the SPI Static Configuration Interface.
|
|
Once locked, the interface can not be changed and can only be clear by system reset.
|
|
|
|
Arguments:
|
|
|
|
This Pointer to the EFI_SPI_PROTOCOL instance.
|
|
|
|
Returns:
|
|
|
|
EFI_SUCCESS Lock operation succeed.
|
|
EFI_DEVICE_ERROR Device error, operation failed.
|
|
EFI_ACCESS_DENIED The interface has already been locked.
|
|
|
|
--*/
|
|
;
|
|
|
|
EFI_STATUS
|
|
EFIAPI
|
|
SpiProtocolExecute (
|
|
IN EFI_SPI_PROTOCOL *This,
|
|
IN UINT8 OpcodeIndex,
|
|
IN UINT8 PrefixOpcodeIndex,
|
|
IN BOOLEAN DataCycle,
|
|
IN BOOLEAN Atomic,
|
|
IN BOOLEAN ShiftOut,
|
|
IN UINTN Address,
|
|
IN UINT32 DataByteCount,
|
|
IN OUT UINT8 *Buffer,
|
|
IN SPI_REGION_TYPE SpiRegionType
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Execute SPI commands from the host controller.
|
|
|
|
Arguments:
|
|
|
|
This Pointer to the EFI_SPI_PROTOCOL instance.
|
|
OpcodeIndex Index of the command in the OpCode Menu.
|
|
PrefixOpcodeIndex Index of the first command to run when in an atomic cycle sequence.
|
|
DataCycle TRUE if the SPI cycle contains data
|
|
Atomic TRUE if the SPI cycle is atomic and interleave cycles are not allowed.
|
|
ShiftOut If DataByteCount is not zero, TRUE to shift data out and FALSE to shift data in.
|
|
Address In Descriptor Mode, for Descriptor Region, GbE Region, ME Region and Platform
|
|
Region, this value specifies the offset from the Region Base; for BIOS Region,
|
|
this value specifies the offset from the start of the BIOS Image. In Non
|
|
Descriptor Mode, this value specifies the offset from the start of the BIOS Image.
|
|
Please note BIOS Image size may be smaller than BIOS Region size (in Descriptor
|
|
Mode) or the flash size (in Non Descriptor Mode), and in this case, BIOS Image is
|
|
supposed to be placed at the top end of the BIOS Region (in Descriptor Mode) or
|
|
the flash (in Non Descriptor Mode)
|
|
DataByteCount Number of bytes in the data portion of the SPI cycle.
|
|
Buffer Pointer to caller-allocated buffer containing the dada received or sent during the SPI cycle.
|
|
SpiRegionType SPI Region type. Values EnumSpiRegionBios, EnumSpiRegionGbE, EnumSpiRegionMe,
|
|
EnumSpiRegionDescriptor, and EnumSpiRegionPlatformData are only applicable in
|
|
Descriptor mode. Value EnumSpiRegionAll is applicable to both Descriptor Mode
|
|
and Non Descriptor Mode, which indicates "SpiRegionOffset" is actually relative
|
|
to base of the 1st flash device (i.e., it is a Flash Linear Address).
|
|
|
|
Returns:
|
|
|
|
EFI_SUCCESS Command succeed.
|
|
EFI_INVALID_PARAMETER The parameters specified are not valid.
|
|
EFI_UNSUPPORTED Command not supported.
|
|
EFI_DEVICE_ERROR Device error, command aborts abnormally.
|
|
|
|
--*/
|
|
;
|
|
|
|
EFI_STATUS
|
|
SendSpiCmd (
|
|
IN EFI_SPI_PROTOCOL *This,
|
|
IN UINT8 OpcodeIndex,
|
|
IN UINT8 PrefixOpcodeIndex,
|
|
IN BOOLEAN DataCycle,
|
|
IN BOOLEAN Atomic,
|
|
IN BOOLEAN ShiftOut,
|
|
IN UINTN Address,
|
|
IN UINT32 DataByteCount,
|
|
IN OUT UINT8 *Buffer,
|
|
IN SPI_REGION_TYPE SpiRegionType
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
This function sends the programmed SPI command to the slave device.
|
|
|
|
Arguments:
|
|
|
|
OpcodeIndex Index of the command in the OpCode Menu.
|
|
PrefixOpcodeIndex Index of the first command to run when in an atomic cycle sequence.
|
|
DataCycle TRUE if the SPI cycle contains data
|
|
Atomic TRUE if the SPI cycle is atomic and interleave cycles are not allowed.
|
|
ShiftOut If DataByteCount is not zero, TRUE to shift data out and FALSE to shift data in.
|
|
Address In Descriptor Mode, for Descriptor Region, GbE Region, ME Region and Platform
|
|
Region, this value specifies the offset from the Region Base; for BIOS Region,
|
|
this value specifies the offset from the start of the BIOS Image. In Non
|
|
Descriptor Mode, this value specifies the offset from the start of the BIOS Image.
|
|
Please note BIOS Image size may be smaller than BIOS Region size (in Descriptor
|
|
Mode) or the flash size (in Non Descriptor Mode), and in this case, BIOS Image is
|
|
supposed to be placed at the top end of the BIOS Region (in Descriptor Mode) or
|
|
the flash (in Non Descriptor Mode)
|
|
DataByteCount Number of bytes in the data portion of the SPI cycle. This function may break the
|
|
data transfer into multiple operations. This function ensures each operation does
|
|
not cross 256 byte flash address boundary.
|
|
*NOTE: if there is some SPI chip that has a stricter address boundary requirement
|
|
(e.g., its write page size is < 256 byte), then the caller cannot rely on this
|
|
function to cut the data transfer at proper address boundaries, and it's the
|
|
caller's reponsibility to pass in a properly cut DataByteCount parameter.
|
|
Buffer Data received or sent during the SPI cycle.
|
|
SpiRegionType SPI Region type. Values EnumSpiRegionBios, EnumSpiRegionGbE, EnumSpiRegionMe,
|
|
EnumSpiRegionDescriptor, and EnumSpiRegionPlatformData are only applicable in
|
|
Descriptor mode. Value EnumSpiRegionAll is applicable to both Descriptor Mode
|
|
and Non Descriptor Mode, which indicates "SpiRegionOffset" is actually relative
|
|
to base of the 1st flash device (i.e., it is a Flash Linear Address).
|
|
|
|
Returns:
|
|
|
|
EFI_SUCCESS SPI command completes successfully.
|
|
EFI_DEVICE_ERROR Device error, the command aborts abnormally.
|
|
EFI_ACCESS_DENIED Some unrecognized command encountered in hardware sequencing mode
|
|
EFI_INVALID_PARAMETER The parameters specified are not valid.
|
|
|
|
--*/
|
|
;
|
|
|
|
BOOLEAN
|
|
WaitForSpiCycleComplete (
|
|
IN EFI_SPI_PROTOCOL *This,
|
|
IN BOOLEAN ErrorCheck
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Wait execution cycle to complete on the SPI interface. Check both Hardware
|
|
and Software Sequencing status registers
|
|
|
|
Arguments:
|
|
|
|
This - The SPI protocol instance
|
|
UseSoftwareSequence - TRUE if this is a Hardware Sequencing operation
|
|
ErrorCheck - TRUE if the SpiCycle needs to do the error check
|
|
|
|
Returns:
|
|
|
|
TRUE SPI cycle completed on the interface.
|
|
FALSE Time out while waiting the SPI cycle to complete.
|
|
It's not safe to program the next command on the SPI interface.
|
|
|
|
--*/
|
|
;
|
|
|
|
EFI_STATUS
|
|
EFIAPI
|
|
SpiProtocolInfo (
|
|
IN EFI_SPI_PROTOCOL *This,
|
|
OUT SPI_INIT_INFO **InitInfoPtr
|
|
)
|
|
/*++
|
|
|
|
Routine Description:
|
|
|
|
Return info about SPI host controller, to help callers usage of Execute
|
|
service.
|
|
|
|
If 0xff is returned as an opcode index in init info struct
|
|
then device does not support the operation.
|
|
|
|
Arguments:
|
|
|
|
This Pointer to the EFI_SPI_PROTOCOL instance.
|
|
InitInfoPtr Pointer to init info written to this memory location.
|
|
|
|
Returns:
|
|
|
|
EFI_SUCCESS Information returned.
|
|
EFI_INVALID_PARAMETER Invalid parameter.
|
|
EFI_NOT_READY Required resources not setup.
|
|
Others Unexpected error happened.
|
|
|
|
--*/
|
|
;
|
|
|
|
#endif
|