7ac55199f2
Add support for setting "Platform Profile" ( #752 )
...
* Add support for setting "Platform Profile"
* Add reference for Platform Profile
2024-08-04 10:15:46 +02:00
6f7e469e66
Code refactoring, more readable and easier to modify ( #736 )
...
* Add global variables
* Add global variables
* Code refactoring
* Refactoring
2024-07-16 16:37:04 +02:00
34ebd04df0
Fix issue where epp cannot be set in `powersave` governor ( #738 )
...
* Fix issue where epp cannot be set in `powersave` governor
* Fix issue where epp cannot be set in `powersave` governor #2
2024-07-15 19:35:47 +02:00
d09063f116
Use `performance` EPP in AMD CPUs when using `performance` governor ( #725 )
2024-06-23 16:23:44 +02:00
3f6d7a3e77
Refactor charging function ( #702 )
...
* Removed the `else` from the top level of the charging() function, the logic is the same but slightly easier to read now.
* Use os.path.exists() in the charging() function before opening the file instead of FileNotFoundError exceptions, makes the function a lot easier to read.
* Close the power_supply_type_path after reading the supply_type as it is not used later.
* Remove `else: continue` from the end of the charging() function for loop, this didn't actually do anything.
I tested the charging() function on my laptop plugged in and plugged out and it is still working as expected with these changes.
2024-05-25 17:09:54 +02:00
cc6d98d8b1
Minor refactor: code clean-up & make it more readable ( #695 )
...
* Clean code
* Back
* Clean code
* Back
* Clean code
* Change arch based detection
2024-05-12 16:16:40 +02:00
f1c1dc6b10
Fix spam error message when setting energy_performance_preference ( #680 )
...
* Fix spam error message when setting energy_performance_preference
The 'intel_pstate' driver does not allow the EPP to be set to anything
but 'performance' when the scaling governor is set to 'performance',
previously auto-cpufreq when the scaling-governor was set to
'performance' tried to set the EPP to 'balance-performance'
which caused a spam of write error messages in journalctl in system
with 'intel_pstate' drivers.
This is an intended behavior, since according to the [kernel documentation](https://docs.kernel.org/admin-guide/pm/intel_pstate.html#hwp-performance )
when HWP is enabled[(which is enabled by default during boot with supported processors)](https://docs.kernel.org/admin-guide/pm/intel_pstate.html#active-mode-with-hwp )
and scaling governor is set to performance the processor’s internal
P-state selection logic is expected to focus entirely on performance.
And this will override the EPP setting and reject any value different from 0 (“performance”).
This commit just changes the 'balance-performance' EPP preference in
set_performance() to 'performance'. Which fixes the spam issue.
* Only applies the spam error message fix for intel_pstate drivers
* Comparing the content of the file
intel_pstate/staus to make sure the condition only applies when "active"
* Override custom config EPP to "performance" for intel_pstate driver
2024-05-06 13:58:38 +02:00
0815e7eb96
Rework config and reload config on file change/creation/deletion ( #663 )
...
* add config.py and config_event_handler.py
also introduces the utils folder
* update config imports and variables
* add 'pyinotify' dependency
* config: check for changes using threading
* config: handle errors and new eventsx
* config: set_path even if file doesn't exist and make new ConfigParser on every update
* fix get_config call
* config: check for changes on moved file
* call notifier.start() manually to prevent hanging
* config: update comments
* battery: fix config imports
* config: fix config deletion detection
* Add load from user config in XDG_CONFIG_HOME if available (#672 )
* Add load from user config from in XDG_CONFIG_HOME if available
This update introduces the flexibility to load the configuration file from
multiple locations, prioritizing user preferences and system standards.
Previously, the configuration was strictly read from a hardcoded
system path (`/etc/auto-cpufreq.conf`). Now, the application first checks if the
user has specified a configuration file path via command line arguments. If not,
it looks for a configuration file in the user's config
directory (`$XDG_CONFIG_HOME/auto-cpufreq/auto-cpufreq.conf`). If neither is
found, it defaults to the original system-wide configuration file.
This allows users to add their auto-cpufreq configuration to their dotfiles.
* If --config is set but invalid, exit with error
* Remove redundant empty string check on config file path
* Remove duplicate isfile check for config path
See also: https://github.com/AdnanHodzic/auto-cpufreq/pull/672#discussion_r1548003119
* Update configuration options in README
See also: #672
* config: move find_config_file function and fix finding home directory
* auto_cpufreq: fix hanging on --daemon, --live, and --monitor
* swap pyinotify for patched version
---------
Co-authored-by: Steven Braun <steven.braun.mz@gmail.com>
2024-04-30 08:35:53 +02:00
2df634b09c
gh-667: Modify message when using amd-pstate-epp ( #674 )
...
* gh-667: Modify message when using amd-pstate-epp
* Address code review
* Address code review
* nit
* Update
* fix typo
---------
Co-authored-by: shadeyg56 <shadeyg56@gmail.com>
2024-04-09 14:28:56 -05:00
0354ff6cc4
Updated error handling to provide specific message for rate limit exceeded condition ( #657 )
2024-02-25 19:40:04 -06:00
68dec52bce
Fix dynamic boosting being incorrectly diagnosed ( #631 )
...
* Fix dynamic boosting being incorrectly diagnosed
* Fix indentation
* Fix bool literal
2024-01-24 05:33:24 +01:00
d2cb5a3761
Change check_for_update to not exit process on server connection error ( #629 )
...
Co-authored-by: hingen <1627313-hingen@users.noreply.gitlab.com>
2024-01-21 13:08:31 +01:00
fe29620646
Add support for configuring/overriding "Energy Performance Preference (EPP)" ( #619 )
...
* Added support for configuring/overriding energy performance preference (EPP)
* Corrected path to print available energy performance preferences in docs
* Added "EPP" wording to config examples
* Added message when EPP is not supported
2023-12-29 08:11:27 +01:00
2e47f47b21
Add zenpower for AMD CPU temps ( #590 )
2023-11-03 07:40:37 +01:00
34f3d23aa0
Feature: Allow GUI to detect available update and install it ( #587 )
...
* rename verify_update and give return value
* change verify_update call
* GUI: add update feature
2023-10-27 11:38:42 +02:00
d3760eaf37
skip temp sensor that report as 0
2023-10-23 21:19:45 -05:00
37e12a4266
Support for pyproject.toml ( #576 )
...
* feat: support for pyproject.toml
* Nix: Fix package to work with pyproject.toml
---------
Co-authored-by: shadeyg56 <shadeyg56@gmail.com>
2023-10-13 08:04:49 +02:00
0f14a6a252
wrapper: switch sh to bash (Void fix)
2023-10-11 17:16:51 -05:00
7f3b3e1fc1
chore: bumped version from 2.0 to 2.0.0 and improved error catching on update ( #558 )
2023-09-18 21:09:56 +02:00
7e02a0769d
added optional path in --update ( #538 )
...
* add --dir
* add to path option to --update
* optional add to path in --update
* update
* update README.md
* resolve bugs
2023-09-18 19:59:46 +02:00
674b3c4ae0
sysinfo: check for additional sensors and no longer default to first sensor ( #548 )
2023-09-07 18:24:49 +02:00
0925b5d542
Gtk Application for auto-cpufreq ( #486 )
...
* Squashed commit of the following:
commit ec7e087b343f33af7a92b190ed666845dab60f20
Merge: 32b6e63 9912f9d9912f9d809#485 )
* Updated Readme for issue auto-cpufreq not autostarting
Added solution to issue https://github.com/AdnanHodzic/auto-cpufreq/issues/463
* Fixed minor errors
* Fixed auto-cpufreq.serivce Typo
* Reprashed text as per suggestion
commit 4379024adab282fcdb58a7091df2a6adf833e700
Author: shadeyg56 <shadeyg56@gmail.com>
Date: Tue Feb 7 19:06:59 2023 -0600
add removal of gui and desktop entry
commit 42693703324762418a7f810f04a3d77803afa236
Author: shadeyg56 <shadeyg56@gmail.com>
Date: Mon Feb 6 23:28:44 2023 -0600
CPU stats refresh and style stuff
commit 7149db72c0bb39af57ceccb16df8e9164c77fae3
Author: shadeyg56 <shadeyg56@gmail.com>
Date: Mon Feb 6 23:10:29 2023 -0600
daemon detection, daemon install/removal, and layout stuff
commit f7e03c9bcc2e2578703807ceeb7a652903571b71
Author: shadeyg56 <shadeyg56@gmail.com>
Date: Sun Feb 5 19:26:42 2023 -0600
improve AboutDialog
Please enter the commit message for your changes. Lines starting
commit cb8cfe7b3194273dea229fe550fdf66cd6af82fa
Author: shadeyg56 <shadeyg56@gmail.com>
Date: Sun Feb 5 18:28:19 2023 -0600
add dropdown menu and (not completed) about dialog
commit ade1fed790f2ebbaae4e92ce8879ab812c9b2850
Author: shadeyg56 <shadeyg56@gmail.com>
Date: Sun Feb 5 15:57:17 2023 -0600
actually fix css
commit 67c8c97bcf2f2f408431bc162c38dee5c278ed0b
Author: shadeyg56 <shadeyg56@gmail.com>
Date: Sun Feb 5 15:54:47 2023 -0600
fix css
commit c65eac34728f343df8f343df8b8dadfae0b38919f#481 from shadeyg56/master
Fix uncaught error in checking for snap
commit b38919f56bdadfae0dadfae087f471611de7df574257dc404b878360cfe21ddf24569ef9139912f9d8f343dfdadfae069ef913
2023-08-15 17:58:16 +02:00
3dffa23e00
Add auto-cpufreq --update feature ( #535 )
...
* update feature
* update feature added
* '--update'
* update feature
2023-07-15 21:32:23 +02:00
c34e3e7fbd
Fix bug related to repeated sudo prompt due to set_override calls ( #531 )
...
set_override method is now called only if force flag is invoked.
Here are the specific code changes made:
In auto_cpufreq/core.py:
- Line 96: Removed the root_check call from the set_override function.
This was intended to be done to comply with code template,
i.e., to use root_check in the main file.
In bin/auto-cpufreq:
- Line 45: Added a root_check call before calling set_override in main program.
Also, set_override is only called if force option is invoked, saving
us from precious extra overheads.
Fixes #530
2023-06-30 08:37:19 +02:00
486a9a6dc2
Adding root_check before set_override method execution ( #524 )
...
This will ensure that set_override calls are always in su mode.
So, in effect all override using 'force' can clearly access
the governer_override_state path file, and write changes to it,
without externally tinkering the environment.
2023-06-24 07:42:56 +02:00
3dcf2fd837
Ensure all core indices are handled, RPI 4 support
2023-05-21 14:03:29 +02:00
9a935ebd5b
Re-align how usage, temp, and freq are displayed
2023-05-21 13:10:44 +02:00
b1758ba74b
check for CPU lable if no coretemp ( #513 )
...
Attempt to use "CPU" label before falling back to the first sensor.
2023-05-21 12:31:39 +02:00
04b878360c
Snap tag 2.0-beta + governor_override improvements
2023-02-03 18:05:27 +01:00
fe21ddf245
Working governor override on Snap package
2023-02-03 17:28:12 +01:00
69ef913c1b
Change override.pickle location + add to snap
2023-02-02 17:18:58 +01:00
2bfe71e8d8
[Feature] Force use of powersave or performance governors ( #476 )
...
* add the --force option and governor overrides
* update README to reflect --force option
* add --state option
* update README with --state option
* update README to expand on --force functionality
* change name of remove() func and remove pickle upon --remove
* check if daemon is not running when using --force and change --state
* add links to README
* change force section wording
* add quotes to --force help
* add override warning to stats file
* hide --get-state flag
* consolidate error messages and add daemon checks to --get-state and --stats
* add quotes
2023-02-01 16:39:14 +01:00
122dd0f96c
Use usr/local/bin instead of usr/bin for Silverblue and other immutable OSs ( #460 )
...
* usr/local/bin instead of usr/bin/
* fix shebang
2022-11-24 17:44:57 +01:00
d77c1de6d6
Removed battery percentage
2022-11-18 06:29:15 +01:00
d26ec98837
Add missing display system load average info
2022-11-13 19:17:35 +01:00
d60642720a
Fixed bug where turbo boost will always be on in performance mode ( #455 )
...
* Fixed bug where Turbo Boost is always on in performance mode
* Removed debugging prints
* Added new line at EOF
2022-11-12 06:23:45 +01:00
2ae8ed4be2
Round battery cha/discharging percentage display
2022-11-12 06:20:52 +01:00
6e74a95f10
Add functionality to display system load average
2022-11-12 06:02:26 +01:00
ff72e1e0f3
fixed battery_percentage ( #442 )
2022-10-11 06:29:05 +02:00
43b33be51c
battery_percentage fix ( #437 )
2022-09-25 18:50:53 +02:00
98569ad71a
SunkenHero Code optimization & addition of battery percentage ( #432 )
...
* Added fan speed display
* optimizations in temperatures
* Simplified charging function and added percentage display
* change print battery status
* Fixed charging not returning boolean
* battery_percentage returns now rounded value insead of 10 decimals
* changed charging function back
* changed charging back and some display changes
* little fix at display battery percentage
* battery percentage not showing %
2022-09-10 14:02:17 +02:00
620433d78d
Replaced obsolete "egrep" calls with "grep -E" ( #435 )
2022-09-10 08:37:19 +02:00
1a35c3ca01
Added fan speed display ( #431 )
2022-09-08 07:46:34 +02:00
7573df7bb2
Omit the --all flag from calling nproc to get actual number of cores instead of threads. ( #423 )
2022-08-22 16:42:09 +02:00
dad1c819fd
Don't overwrite /usr/bin/cpufreqctl.auto-cpufreq excessively. ( #420 )
...
Looks like the behavior of constantly overwriting it was not intended,
but introduced inadvertently in a91d4ba36e
2022-08-15 12:32:54 +02:00
f67e909b59
Catch exception in call to psutil .cmdline() ( #413 )
...
There's a race condition where processes might disappear while filtering. The uncaught exception causes a crash.
2022-08-10 14:23:58 +02:00
29d5d87ded
fix multiple typos as reported by typos ( #410 )
2022-07-31 08:14:27 +02:00
812e97d8d9
Fix daemon typo ( #409 )
2022-07-28 09:35:52 +02:00
d9295f4cf2
Revamped how log file is emptied
2022-06-05 20:10:33 +02:00
c8f9095067
Real time auto-cpufreq refresh
2022-06-05 17:44:33 +02:00
Harsh Panchal
Angel
Abhishek Girish
dementive
Anshu Gahire
shadeyg56
Donghee Na
monarkjain
PhoenixCausesOof
hingen
Murray Gervais
Fredin
Lab Rat
shadeyg56
Devesh Sharma
Adnan Hodzic
marchwicki
Gimbles
Ben
Tobias
BowDown097
Martin Andersson
Ishaan Bhimwal
tacheometry