services.auto-cpufreq.enable = true; # enable the service

services.auto-cpufreq.settings = {
  # settings for when connected to a power source
  charger = {
    # see available governors by running: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
    # preferred governor.
    governor = "performance";

    # EPP: see available preferences by running: cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences
    energy_performance_preference = "performance";

    # EPB (Energy Performance Bias) for the intel_pstate driver
    # see conversion info: https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_epb.html
    # available EPB options include a numeric value between 0-15
    # (where 0 = maximum performance and 15 = maximum power saving),
    # or one of the following strings:
    # performance (0), balance_performance (4), default (6), balance_power (8), or power (15)
    # if the parameter is missing in the config and the hardware supports this setting, the default value will be used
    # the default value is `balance_performance` (for charger)
    # energy_perf_bias = "balance_performance";

    # Platform Profiles
    # https://www.kernel.org/doc/html/latest/userspace-api/sysfs-platform_profile.html
    # See available options by running:
    # cat /sys/firmware/acpi/platform_profile_choices
    # platform_profile = "performance";

    # minimum cpu frequency (in kHz)
    # example: for 800 MHz = 800000 kHz --> scaling_min_freq = 800000
    # see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
    # to use this feature, uncomment the following line and set the value accordingly
    # scaling_min_freq = 800000;

    # maximum cpu frequency (in kHz)
    # example: for 1GHz = 1000 MHz = 1000000 kHz -> scaling_max_freq = 1000000
    # see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
    # to use this feature, uncomment the following line and set the value accordingly
    # scaling_max_freq = 1000000;

    # turbo boost setting. possible values: always, auto, never
    turbo = "auto";
  };

  # this is for ignoring controllers and other connected devices battery from affecting
  # laptop performance
  # power_supply_ignore_list = {
  #   name1 = "this";
  #   name2 = "is";
  #   name3 = "an";
  #   name4 = "example";
  # };

  # settings for when using battery power
  battery = {
    # see available governors by running: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
    # preferred governor
    governor = "powersave";

    # EPP: see available preferences by running: cat /sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences
    energy_performance_preference = "power";

    # EPB (Energy Performance Bias) for the intel_pstate driver
    # see conversion info: https://www.kernel.org/doc/html/latest/admin-guide/pm/intel_epb.html
    # available EPB options include a numeric value between 0-15
    # (where 0 = maximum performance and 15 = maximum power saving),
    # or one of the following strings:
    # performance (0), balance_performance (4), default (6), balance_power (8), or power (15)
    # if the parameter is missing in the config and the hardware supports this setting, the default value will be used
    # the default value is `balance_power` (for battery)
    # energy_perf_bias = "balance_power";

    # Platform Profiles
    # https://www.kernel.org/doc/html/latest/userspace-api/sysfs-platform_profile.html
    # See available options by running:
    # cat /sys/firmware/acpi/platform_profile_choices
    # platform_profile = "low-power";

    # minimum cpu frequency (in kHz)
    # example: for 800 MHz = 800000 kHz --> scaling_min_freq = 800000
    # see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
    # to use this feature, uncomment the following line and set the value accordingly
    # scaling_min_freq = 800000;

    # maximum cpu frequency (in kHz)
    # see conversion info: https://www.rapidtables.com/convert/frequency/mhz-to-hz.html
    # example: for 1GHz = 1000 MHz = 1000000 kHz -> scaling_max_freq = 1000000
    # to use this feature, uncomment the following line and set the value accordingly
    # scaling_max_freq = 1000000;

    # turbo boost setting. possible values: always, auto, never
    turbo = "auto";

    # experimental

    # Add battery charging threshold (currently only available to Lenovo)
    # checkout README.md for more info

    # enable thresholds true or false
    # enable_thresholds = true;
    #
    # start threshold (0 is off ) can be 0-99
    # start_threshold = 0;
    #
    # stop threshold (100 is off) can be 1-100
    # stop_threshold = 100;
  };
};