+ factorize code

centreon/common/cisco/standard/snmp/mode/components/fan.pm

@@ -43,10 +43,9 @@ my $oid_cefcFanTrayOperStatus = '.1.3.6.1.4.1.9.9.117.1.4.1.1.1'; # CISCO-ENTITY
 my $oid_entPhysicalDescr = '.1.3.6.1.2.1.47.1.1.1.1.2';
 
 sub load {
-    my (%options) = @_;
+    my ($self) = @_;
     
-    push @{$options{request}}, { oid => $oid_ciscoEnvMonFanStatusEntry };
+    push @{$self->{request}}, { oid => $oid_ciscoEnvMonFanStatusEntry }, { oid => $oid_cefcFanTrayOperStatus };
-    push @{$options{request}}, { oid => $oid_cefcFanTrayOperStatus };
 }
 
 sub check_fan_envmon {
@@ -64,7 +63,7 @@ sub check_fan_envmon {
 
         my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_ciscoEnvMonFanStatusEntry}, instance => $instance);
 
-        next if ($self->check_exclude(section => 'fan', instance => $instance));
+        next if ($self->check_filter(section => 'fan', instance => $instance));
         next if ($result->{ciscoEnvMonFanState} =~ /not present/i && 
                  $self->absent_problem(section => 'fan', instance => $instance));
         $self->{components}->{fan}->{total}++;
@@ -95,7 +94,7 @@ sub check_fan_entity {
         my $fan_descr = $self->{results}->{$oid_entPhysicalDescr}->{$oid_entPhysicalDescr . '.' . $instance};
         my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_cefcFanTrayOperStatus}, instance => $instance);
         
-        next if ($self->check_exclude(section => 'fan', instance => $instance));
+        next if ($self->check_filter(section => 'fan', instance => $instance));
         
         $self->{components}->{fan}->{total}++;
         $self->{output}->output_add(long_msg => sprintf("Fan '%s' status is %s [instance: %s]",
@@ -113,7 +112,7 @@ sub check {
     
     $self->{output}->output_add(long_msg => "Checking fans");
     $self->{components}->{fan} = {name => 'fans', total => 0, skip => 0};
-    return if ($self->check_exclude(section => 'fan'));
+    return if ($self->check_filter(section => 'fan'));
 
     check_fan_envmon($self);
     check_fan_entity($self);

centreon/common/cisco/standard/snmp/mode/components/module.pm

@@ -61,9 +61,9 @@ my $oid_cefcModuleOperStatus = '.1.3.6.1.4.1.9.9.117.1.2.1.1.2';
 my $oid_entPhysicalDescr = '.1.3.6.1.2.1.47.1.1.1.1.2';
 
 sub load {
-    my (%options) = @_;
+    my ($self) = @_;
     
-    push @{$options{request}}, { oid => $oid_cefcModuleOperStatus };
+    push @{$self->{request}}, { oid => $oid_cefcModuleOperStatus };
 }
 
 sub check {
@@ -71,7 +71,7 @@ sub check {
     
     $self->{output}->output_add(long_msg => "Checking modules");
     $self->{components}->{module} = {name => 'modules', total => 0, skip => 0};
-    return if ($self->check_exclude(section => 'module'));
+    return if ($self->check_filter(section => 'module'));
 
     foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_cefcModuleOperStatus}})) {
         $oid =~ /\.([0-9]+)$/;
@@ -79,7 +79,7 @@ sub check {
         my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_cefcModuleOperStatus}, instance => $instance);
         my $module_descr = $self->{results}->{$oid_entPhysicalDescr}->{$oid_entPhysicalDescr . '.' . $instance};
         
-        next if ($self->check_exclude(section => 'module', instance => $instance));
+        next if ($self->check_filter(section => 'module', instance => $instance));
         
         $self->{components}->{module}->{total}++;
         $self->{output}->output_add(long_msg => sprintf("Module '%s' status is %s [instance: %s]",

centreon/common/cisco/standard/snmp/mode/components/physical.pm

@@ -38,9 +38,9 @@ my $oid_cefcPhysicalStatus = '.1.3.6.1.4.1.9.9.117.1.5.1.1.1';
 my $oid_entPhysicalDescr = '.1.3.6.1.2.1.47.1.1.1.1.2';
 
 sub load {
-    my (%options) = @_;
+    my ($self) = @_;
     
-    push @{$options{request}}, { oid => $oid_cefcPhysicalStatus };
+    push @{$self->{request}}, { oid => $oid_cefcPhysicalStatus };
 }
 
 sub check {
@@ -48,7 +48,7 @@ sub check {
     
     $self->{output}->output_add(long_msg => "Checking physicals");
     $self->{components}->{physical} = {name => 'physical', total => 0, skip => 0};
-    return if ($self->check_exclude(section => 'physical'));
+    return if ($self->check_filter(section => 'physical'));
 
     foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_cefcPhysicalStatus}})) {
         $oid =~ /\.([0-9]+)$/;
@@ -61,7 +61,7 @@ sub check {
             next;
         }
         
-        next if ($self->check_exclude(section => 'physical', instance => $instance));
+        next if ($self->check_filter(section => 'physical', instance => $instance));
         
         $self->{components}->{physical}->{total}++;
         $self->{output}->output_add(long_msg => sprintf("Physical '%s' status is %s [instance: %s]",

centreon/common/cisco/standard/snmp/mode/components/psu.pm

@@ -58,10 +58,9 @@ my $oid_cefcFRUPowerOperStatus = '.1.3.6.1.4.1.9.9.117.1.1.2.1.2'; # CISCO-ENTIT
 my $oid_entPhysicalDescr = '.1.3.6.1.2.1.47.1.1.1.1.2';
 
 sub load {
-    my (%options) = @_;
+    my ($self) = @_;
     
-    push @{$options{request}}, { oid => $oid_ciscoEnvMonSupplyStatusEntry };
+    push @{$self->{request}}, { oid => $oid_ciscoEnvMonSupplyStatusEntry }, { oid => $oid_cefcFRUPowerOperStatus };
-    push @{$options{request}}, { oid => $oid_cefcFRUPowerOperStatus };
 }
 
 sub check_psu_envmon {
@@ -80,7 +79,7 @@ sub check_psu_envmon {
 
         my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_ciscoEnvMonSupplyStatusEntry}, instance => $instance);
 
-        next if ($self->check_exclude(section => 'psu', instance => $instance));
+        next if ($self->check_filter(section => 'psu', instance => $instance));
         next if ($result->{ciscoEnvMonSupplyState} =~ /not present/i && 
                  $self->absent_problem(section => 'psu', instance => $instance));
         $self->{components}->{psu}->{total}++;
@@ -111,7 +110,7 @@ sub check_psu_entity {
         my $psu_descr = $self->{results}->{$oid_entPhysicalDescr}->{$oid_entPhysicalDescr . '.' . $instance};
         my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_cefcFRUPowerOperStatus}, instance => $instance);
         
-        next if ($self->check_exclude(section => 'psu', instance => $instance));
+        next if ($self->check_filter(section => 'psu', instance => $instance));
         
         $self->{components}->{psu}->{total}++;
         $self->{output}->output_add(long_msg => sprintf("Power supply '%s' status is %s [instance: %s]",
@@ -129,7 +128,7 @@ sub check {
     
     $self->{output}->output_add(long_msg => "Checking power supplies");
     $self->{components}->{psu} = {name => 'psus', total => 0, skip => 0};
-    return if ($self->check_exclude(section => 'psu'));
+    return if ($self->check_filter(section => 'psu'));
 
     check_psu_envmon($self);
     check_psu_entity($self);

centreon/common/cisco/standard/snmp/mode/components/sensor.pm

@@ -112,9 +112,9 @@ my $oid_entSensorThresholdEntry = '.1.3.6.1.4.1.9.9.91.1.2.1.1';
 my $oid_entPhysicalDescr = '.1.3.6.1.2.1.47.1.1.1.1.2';
 
 sub load {
-    my (%options) = @_;
+    my ($self) = @_;
     
-    push @{$options{request}}, { oid => $oid_entSensorValueEntry }, { oid => $oid_entSensorThresholdEntry };
+    push @{$self->{request}}, { oid => $oid_entSensorValueEntry }, { oid => $oid_entSensorThresholdEntry };
 }
 
 sub get_default_warning_threshold {
@@ -178,7 +178,7 @@ sub check {
     
     $self->{output}->output_add(long_msg => "Checking sensors");
     $self->{components}->{sensor} = {name => 'sensors', total => 0, skip => 0};
-    return if ($self->check_exclude(section => 'sensor'));
+    return if ($self->check_filter(section => 'sensor'));
     
     foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_entSensorValueEntry}})) {
         next if ($oid !~ /^$mapping->{entSensorStatus}->{oid}\.(.*)$/);
@@ -188,7 +188,7 @@ sub check {
         next if (!defined($self->{results}->{$oid_entPhysicalDescr}->{$oid_entPhysicalDescr . '.' . $instance}));
         my $sensor_descr = $self->{results}->{$oid_entPhysicalDescr}->{$oid_entPhysicalDescr . '.' . $instance};
         
-        next if ($self->check_exclude(section => 'sensor', instance => $instance));
+        next if ($self->check_filter(section => 'sensor', instance => $instance));
         $self->{components}->{sensor}->{total}++;
 
         $result->{entSensorValue} = defined($result->{entSensorValue}) ? 

centreon/common/cisco/standard/snmp/mode/components/temperature.pm

@@ -42,9 +42,9 @@ my $mapping = {
 my $oid_ciscoEnvMonTemperatureStatusEntry = '.1.3.6.1.4.1.9.9.13.1.3.1';
 
 sub load {
-    my (%options) = @_;
+    my ($self) = @_;
     
-    push @{$options{request}}, { oid => $oid_ciscoEnvMonTemperatureStatusEntry };
+    push @{$self->{request}}, { oid => $oid_ciscoEnvMonTemperatureStatusEntry };
 }
 
 sub check {
@@ -52,14 +52,14 @@ sub check {
     
     $self->{output}->output_add(long_msg => "Checking temperatures");
     $self->{components}->{temperature} = {name => 'temperatures', total => 0, skip => 0};
-    return if ($self->check_exclude(section => 'temperature'));
+    return if ($self->check_filter(section => 'temperature'));
     
     foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_ciscoEnvMonTemperatureStatusEntry}})) {
         next if ($oid !~ /^$mapping->{ciscoEnvMonTemperatureState}->{oid}\.(.*)$/);
         my $instance = $1;
         my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_ciscoEnvMonTemperatureStatusEntry}, instance => $instance);
         
-        next if ($self->check_exclude(section => 'temperature', instance => $instance));
+        next if ($self->check_filter(section => 'temperature', instance => $instance));
         $self->{components}->{temperature}->{total}++;
 
         $self->{output}->output_add(long_msg => sprintf("Temperature '%s' status is %s [instance: %s] [value: %s C]", 

centreon/common/cisco/standard/snmp/mode/components/voltage.pm

@@ -43,9 +43,9 @@ my $mapping = {
 my $oid_ciscoEnvMonVoltageStatusEntry = '.1.3.6.1.4.1.9.9.13.1.2.1';
 
 sub load {
-    my (%options) = @_;
+    my ($self) = @_;
     
-    push @{$options{request}}, { oid => $oid_ciscoEnvMonVoltageStatusEntry };
+    push @{$self->{request}}, { oid => $oid_ciscoEnvMonVoltageStatusEntry };
 }
 
 sub check {
@@ -53,14 +53,14 @@ sub check {
     
     $self->{output}->output_add(long_msg => "Checking voltages");
     $self->{components}->{voltage} = {name => 'voltages', total => 0, skip => 0};
-    return if ($self->check_exclude(section => 'voltage'));
+    return if ($self->check_filter(section => 'voltage'));
     
     foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_ciscoEnvMonVoltageStatusEntry}})) {
         next if ($oid !~ /^$mapping->{ciscoEnvMonVoltageState}->{oid}\.(.*)$/);
         my $instance = $1;
         my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_ciscoEnvMonVoltageStatusEntry}, instance => $instance);
         
-        next if ($self->check_exclude(section => 'voltage', instance => $instance));
+        next if ($self->check_filter(section => 'voltage', instance => $instance));
         $self->{components}->{voltage}->{total}++;
 
         $self->{output}->output_add(long_msg => sprintf("Voltage '%s' status is %s [instance: %s] [value: %s C]", 

centreon/common/cisco/standard/snmp/mode/environment.pm

@@ -20,11 +20,86 @@
 
 package centreon::common::cisco::standard::snmp::mode::environment;
 
-use base qw(centreon::plugins::mode);
+use base qw(centreon::plugins::templates::hardware);
 
 use strict;
 use warnings;
 
+sub set_system {
+    my ($self, %options) = @_;
+    
+    $self->{regexp_threshold_overload_check_section_option} = '^(fan|psu|temperature|voltage|module|physical|sensor)$';
+    $self->{regexp_threshold_numeric_check_section_option} = '^(temperature|voltage|sensor)$';
+    
+    $self->{cb_hook2} = 'snmp_execute';
+    
+    $self->{thresholds} = {
+        fan => [
+            ['unknown', 'UNKNOWN'],
+            ['down', 'CRITICAL'],
+            ['up', 'OK'],
+            
+            ['normal', 'OK'],
+            ['warning', 'WARNING'],
+            ['critical', 'CRITICAL'],
+            ['shutdown', 'CRITICAL'],
+            ['not present', 'OK'],
+            ['not functioning', 'WARNING'],
+        ],
+        psu => [
+            ['^off*', 'WARNING'],
+            ['failed', 'CRITICAL'],
+            ['onButFanFail|onButInlinePowerFail', 'WARNING'],
+            ['on', 'OK'],
+            
+            ['normal', 'OK'],
+            ['warning', 'WARNING'],
+            ['critical', 'CRITICAL'],
+            ['shutdown', 'CRITICAL'],
+            ['not present', 'OK'],
+            ['not functioning', 'WARNING'],
+        ],
+        temperature => [
+            ['normal', 'OK'],
+            ['warning', 'WARNING'],
+            ['critical', 'CRITICAL'],
+            ['shutdown', 'CRITICAL'],
+            ['not present', 'OK'],
+            ['not functioning', 'WARNING'],
+        ],
+        voltage => [
+            ['normal', 'OK'],
+            ['warning', 'WARNING'],
+            ['critical', 'CRITICAL'],
+            ['shutdown', 'CRITICAL'],
+            ['not present', 'OK'],
+            ['not functioning', 'WARNING'],
+        ],
+        module => [
+            ['unknown|mdr', 'UNKNOWN'],
+            ['disabled|okButDiagFailed|missing|mismatchWithParent|mismatchConfig|dormant|outOfServiceAdmin|outOfServiceEnvTemp|powerCycled|okButPowerOverWarning|okButAuthFailed|fwMismatchFound|fwDownloadFailure', 'WARNING'],
+            ['failed|diagFailed|poweredDown|powerDenied|okButPowerOverCritical', 'CRITICAL'],
+            ['boot|selfTest|poweredUp|syncInProgress|upgrading|fwDownloadSuccess|ok', 'OK'],
+        ],
+        physical => [
+            ['other', 'UNKNOWN'],
+            ['incompatible|unsupported', 'CRITICAL'],
+            ['supported', 'OK'],
+        ],
+        sensor => [
+            ['ok', 'OK'],
+            ['unavailable', 'OK'],
+            ['nonoperational', 'CRITICAL'],
+        ],
+    };
+    
+    $self->{components_path} = 'centreon::common::cisco::standard::snmp::mode::components';
+    $self->{components_module} = ['fan', 'psu', 'temperature', 'voltage', 'module', 'physical', 'sensor'];
+}
+
+my $oid_entPhysicalDescr = '.1.3.6.1.2.1.47.1.1.1.1.2';
+my $oid_ciscoEnvMonPresent = ".1.3.6.1.4.1.9.9.13.1.1";
+
 my %map_type_mon = (
     1 => 'oldAgs',
     2 => 'ags',
@@ -41,65 +116,17 @@ my %map_type_mon = (
     14 => 'other'
 );
 
-my $thresholds = {
+sub snmp_execute {
-    fan => [
+    my ($self, %options) = @_;
-        ['unknown', 'UNKNOWN'],
+    
-        ['down', 'CRITICAL'],
+    $self->{snmp} = $options{snmp};
-        ['up', 'OK'],
+    
-        
+    push @{$self->{request}}, { oid => $oid_entPhysicalDescr }, { oid => $oid_ciscoEnvMonPresent };
-        ['normal', 'OK'],
+    $self->{results} = $self->{snmp}->get_multiple_table(oids => );
-        ['warning', 'WARNING'],
+    $self->{output}->output_add(long_msg => sprintf("Environment type: %s", 
-        ['critical', 'CRITICAL'],
+                                defined($self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}) && defined($map_type_mon{$self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}} ) ? 
-        ['shutdown', 'CRITICAL'],
+                                $map_type_mon{$self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}} : 'unknown'));
-        ['not present', 'OK'],
+}
-        ['not functioning', 'WARNING'],
-    ],
-    psu => [
-        ['^off*', 'WARNING'],
-        ['failed', 'CRITICAL'],
-        ['onButFanFail|onButInlinePowerFail', 'WARNING'],
-        ['on', 'OK'],
-        
-        ['normal', 'OK'],
-        ['warning', 'WARNING'],
-        ['critical', 'CRITICAL'],
-        ['shutdown', 'CRITICAL'],
-        ['not present', 'OK'],
-        ['not functioning', 'WARNING'],
-    ],
-    temperature => [
-        ['normal', 'OK'],
-        ['warning', 'WARNING'],
-        ['critical', 'CRITICAL'],
-        ['shutdown', 'CRITICAL'],
-        ['not present', 'OK'],
-        ['not functioning', 'WARNING'],
-    ],
-    voltage => [
-        ['normal', 'OK'],
-        ['warning', 'WARNING'],
-        ['critical', 'CRITICAL'],
-        ['shutdown', 'CRITICAL'],
-        ['not present', 'OK'],
-        ['not functioning', 'WARNING'],
-    ],
-    module => [
-        ['unknown|mdr', 'UNKNOWN'],
-        ['disabled|okButDiagFailed|missing|mismatchWithParent|mismatchConfig|dormant|outOfServiceAdmin|outOfServiceEnvTemp|powerCycled|okButPowerOverWarning|okButAuthFailed|fwMismatchFound|fwDownloadFailure', 'WARNING'],
-        ['failed|diagFailed|poweredDown|powerDenied|okButPowerOverCritical', 'CRITICAL'],
-        ['boot|selfTest|poweredUp|syncInProgress|upgrading|fwDownloadSuccess|ok', 'OK'],
-    ],
-    physical => [
-        ['other', 'UNKNOWN'],
-        ['incompatible|unsupported', 'CRITICAL'],
-        ['supported', 'OK'],
-    ],
-    sensor => [
-        ['ok', 'OK'],
-        ['unavailable', 'OK'],
-        ['nonoperational', 'CRITICAL'],
-    ],
-};
 
 sub new {
     my ($class, %options) = @_;
@@ -109,227 +136,11 @@ sub new {
     $self->{version} = '1.0';
     $options{options}->add_options(arguments =>
                                 { 
-                                  "exclude:s"        => { name => 'exclude' },
-                                  "absent-problem:s" => { name => 'absent' },
-                                  "component:s"      => { name => 'component', default => '.*' },
-                                  "no-component:s"   => { name => 'no_component' },
-                                  "threshold-overload:s@"   => { name => 'threshold_overload' },
-                                  "warning:s@"              => { name => 'warning' },
-                                  "critical:s@"             => { name => 'critical' },
                                 });
-
-    $self->{components} = {};
-    $self->{no_components} = undef;
     
     return $self;
 }
 
-sub check_options {
-    my ($self, %options) = @_;
-    $self->SUPER::init(%options);
-    
-    if (defined($self->{option_results}->{no_component})) {
-        if ($self->{option_results}->{no_component} ne '') {
-            $self->{no_components} = $self->{option_results}->{no_component};
-        } else {
-            $self->{no_components} = 'critical';
-        }
-    }
-    
-    $self->{overload_th} = {};
-    foreach my $val (@{$self->{option_results}->{threshold_overload}}) {
-        next if (!defined($val) || $val eq '');
-        my @values = split (/,/, $val);
-        if (scalar(@values) < 3) {
-            $self->{output}->add_option_msg(short_msg => "Wrong threshold-overload option '" . $val . "'.");
-            $self->{output}->option_exit();
-        }
-        my ($section, $instance, $status, $filter);
-        if (scalar(@values) == 3) {
-            ($section, $status, $filter) = @values;
-            $instance = '.*';
-        } else {
-             ($section, $instance, $status, $filter) = @values;
-        }
-        if ($section !~ /^(temperature|fan|psu)$/) {
-            $self->{output}->add_option_msg(short_msg => "Wrong threshold-overload section '" . $val . "'.");
-            $self->{output}->option_exit();
-        }
-        if ($self->{output}->is_litteral_status(status => $status) == 0) {
-            $self->{output}->add_option_msg(short_msg => "Wrong threshold-overload status '" . $val . "'.");
-            $self->{output}->option_exit();
-        }
-        $self->{overload_th}->{$section} = [] if (!defined($self->{overload_th}->{$section}));
-        push @{$self->{overload_th}->{$section}}, {filter => $filter, status => $status, instance => $instance };
-    }
-    
-    $self->{numeric_threshold} = {};
-    foreach my $option (('warning', 'critical')) {
-        foreach my $val (@{$self->{option_results}->{$option}}) {
-            if ($val !~ /^(.*?),(.*?),(.*)$/) {
-                $self->{output}->add_option_msg(short_msg => "Wrong $option option '" . $val . "'.");
-                $self->{output}->option_exit();
-            }
-            my ($section, $regexp, $value) = ($1, $2, $3);
-            if ($section !~ /(temperature|voltage|sensor)/i) {
-                $self->{output}->add_option_msg(short_msg => "Wrong $option option '" . $val . "' (type must be: temperature, voltage or sensor).");
-                $self->{output}->option_exit();
-            }
-            my $position = 0;
-            if (defined($self->{numeric_threshold}->{$section})) {
-                $position = scalar(@{$self->{numeric_threshold}->{$section}});
-            }
-            if (($self->{perfdata}->threshold_validate(label => $option . '-' . $section . '-' . $position, value => $value)) == 0) {
-                $self->{output}->add_option_msg(short_msg => "Wrong $option threshold '" . $value . "'.");
-                $self->{output}->option_exit();
-            }
-            $self->{numeric_threshold}->{$section} = [] if (!defined($self->{numeric_threshold}->{$section}));
-            push @{$self->{numeric_threshold}->{$section}}, { label => $option . '-' . $section . '-' . $position, threshold => $option, regexp => $regexp };
-        }
-    }
-}
-
-sub run {
-    my ($self, %options) = @_;
-    $self->{snmp} = $options{snmp};
-
-    my $oid_entPhysicalDescr = '.1.3.6.1.2.1.47.1.1.1.1.2';
-    my $oid_ciscoEnvMonPresent = ".1.3.6.1.4.1.9.9.13.1.1";
-    my $snmp_request = [ { oid => $oid_entPhysicalDescr }, { oid => $oid_ciscoEnvMonPresent } ];
-    
-    my @components = ('fan', 'psu', 'temperature', 'voltage', 'module', 'physical', 'sensor');
-    foreach (@components) {
-        if (/$self->{option_results}->{component}/) {
-            my $mod_name = "centreon::common::cisco::standard::snmp::mode::components::$_";
-            centreon::plugins::misc::mymodule_load(output => $self->{output}, module => $mod_name,
-                                                   error_msg => "Cannot load module '$mod_name'.");
-            my $func = $mod_name->can('load');
-            $func->(request => $snmp_request); 
-        }
-    }
-    
-    if (scalar(@{$snmp_request}) == 2) {
-        $self->{output}->add_option_msg(short_msg => "Wrong option. Cannot find component '" . $self->{option_results}->{component} . "'.");
-        $self->{output}->option_exit();
-    }
-    $self->{results} = $self->{snmp}->get_multiple_table(oids => $snmp_request);
-    
-    $self->{output}->output_add(long_msg => sprintf("Environment type: %s", 
-                                                    defined($self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}) && defined($map_type_mon{$self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}} ) ? 
-                                                        $map_type_mon{$self->{results}->{$oid_ciscoEnvMonPresent}->{$oid_ciscoEnvMonPresent . '.0'}} : 'unknown'));
-    
-    foreach (@components) {
-        if (/$self->{option_results}->{component}/) {
-            my $mod_name = "centreon::common::cisco::standard::snmp::mode::components::$_";
-            my $func = $mod_name->can('check');
-            $func->($self); 
-        }
-    }
-    
-    my $total_components = 0;
-    my $display_by_component = '';
-    my $display_by_component_append = '';
-    foreach my $comp (sort(keys %{$self->{components}})) {
-        # Skipping short msg when no components
-        next if ($self->{components}->{$comp}->{total} == 0 && $self->{components}->{$comp}->{skip} == 0);
-        $total_components += $self->{components}->{$comp}->{total} + $self->{components}->{$comp}->{skip};
-        my $count_by_components = $self->{components}->{$comp}->{total} + $self->{components}->{$comp}->{skip}; 
-        $display_by_component .= $display_by_component_append . $self->{components}->{$comp}->{total} . '/' . $count_by_components . ' ' . $self->{components}->{$comp}->{name};
-        $display_by_component_append = ', ';
-    }
-    
-    $self->{output}->output_add(severity => 'OK',
-                                short_msg => sprintf("All %s components are ok [%s].", 
-                                                     $total_components,
-                                                     $display_by_component)
-                                );
-
-    if (defined($self->{option_results}->{no_component}) && $total_components == 0) {
-        $self->{output}->output_add(severity => $self->{no_components},
-                                    short_msg => 'No components are checked.');
-    }
-
-    $self->{output}->display();
-    $self->{output}->exit();
-}
-
-sub check_exclude {
-    my ($self, %options) = @_;
-
-    if (defined($options{instance})) {
-        if (defined($self->{option_results}->{exclude}) && $self->{option_results}->{exclude} =~ /(^|\s|,)${options{section}}[^,]*#\Q$options{instance}\E#/) {
-            $self->{components}->{$options{section}}->{skip}++;
-            $self->{output}->output_add(long_msg => sprintf("Skipping $options{section} section $options{instance} instance."));
-            return 1;
-        }
-    } elsif (defined($self->{option_results}->{exclude}) && $self->{option_results}->{exclude} =~ /(^|\s|,)$options{section}(\s|,|$)/) {
-        $self->{output}->output_add(long_msg => sprintf("Skipping $options{section} section."));
-        return 1;
-    }
-    return 0;
-}
-
-sub absent_problem {
-    my ($self, %options) = @_;
-    
-    if (defined($self->{option_results}->{absent}) && 
-        $self->{option_results}->{absent} =~ /(^|\s|,)($options{section}(\s*,|$)|${options{section}}[^,]*#\Q$options{instance}\E#)/) {
-        $self->{output}->output_add(severity => 'CRITICAL',
-                                    short_msg => sprintf("Component '%s' instance '%s' is not present", 
-                                                         $options{section}, $options{instance}));
-    }
-
-    $self->{output}->output_add(long_msg => sprintf("Skipping $options{section} section $options{instance} instance (not present)"));
-    $self->{components}->{$options{section}}->{skip}++;
-    return 1;
-}
-
-
-sub get_severity_numeric {
-    my ($self, %options) = @_;
-    my $status = 'OK'; # default
-    my $thresholds = { warning => undef, critical => undef };
-    my $checked = 0;
-    
-    if (defined($self->{numeric_threshold}->{$options{section}})) {
-        my $exits = [];
-        foreach (@{$self->{numeric_threshold}->{$options{section}}}) {
-            if ($options{instance} =~ /$_->{regexp}/i) {
-                push @{$exits}, $self->{perfdata}->threshold_check(value => $options{value}, threshold => [ { label => $_->{label}, exit_litteral => $_->{threshold} } ]);
-                $thresholds->{$_->{threshold}} = $self->{perfdata}->get_perfdata_for_output(label => $_->{label});
-                $checked = 1;
-            }
-        }
-        $status = $self->{output}->get_most_critical(status => $exits) if (scalar(@{$exits}) > 0);
-    }
-    
-    return ($status, $thresholds->{warning}, $thresholds->{critical}, $checked);
-}
-
-sub get_severity {
-    my ($self, %options) = @_;
-    my $status = 'UNKNOWN'; # default 
-    
-    if (defined($self->{overload_th}->{$options{section}})) {
-        foreach (@{$self->{overload_th}->{$options{section}}}) {            
-            if ($options{value} =~ /$_->{filter}/i && 
-                (!defined($options{instance}) || $options{instance} =~ /$_->{instance}/)) {
-                $status = $_->{status};
-                return $status;
-            }
-        }
-    }
-    my $label = defined($options{label}) ? $options{label} : $options{section};
-    foreach (@{$thresholds->{$label}}) {
-        if ($options{value} =~ /$$_[0]/i) {
-            $status = $$_[1];
-            return $status;
-        }
-    }
-    
-    return $status;
-}
-
 1;
 
 __END__
@@ -345,15 +156,15 @@ Check environment (Power Supplies, Fans, Temperatures, Voltages, Modules, Physic
 Which component to check (Default: '.*').
 Can be: 'fan', 'psu', 'temperature', 'voltage', 'module', 'physical', 'sensor'.
 
-=item B<--exclude>
+=item B<--filter>
 
-Exclude some parts (comma seperated list) (Example: --exclude=fan)
+Exclude some parts (comma seperated list) (Example: --filter=fan --filter=psu)
-Can also exclude specific instance: --exclude=fan#1#,psu#3#
+Can also exclude specific instance: --filter=fan,1
 
 =item B<--absent-problem>
 
 Return an error if an entity is not 'present' (default is skipping) (comma seperated list)
-Can be specific or global: --absent-problem=fan#1#
+Can be specific or global: --absent-problem=fan,1
 
 =item B<--no-component>