+ enhance emc dmx plugin

storage/emc/symmetrix/dmx34/local/mode/components/environment.pm

@@ -1,56 +0,0 @@
-#
-# Copyright 2016 Centreon (http://www.centreon.com/)
-#
-# Centreon is a full-fledged industry-strength solution that meets
-# the needs in IT infrastructure and application monitoring for
-# service performance.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-package storage::emc::symmetrix::dmx34::local::mode::components::environment;
-
-use base qw(centreon::plugins::mode);
-
-use strict;
-use warnings;
-
-#     -------------[ Power Information ]-------------
-# 
-#  No Environmental Problems found
-sub check {
-    my ($self) = @_;
-
-    $self->{output}->output_add(long_msg => "Checking environment");
-    $self->{components}->{environment} = {name => 'environment', total => 0, skip => 0};
-    return if ($self->check_filter(section => 'environment'));
-    
-    if ($self->{content_file_health} !~ /----\[ Power Information(.*?)----\[/msi) {
-        $self->{output}->output_add(long_msg => 'skipping: cannot find environment');
-        return ;
-    }
-    
-    my $content = $1;    
-    $self->{components}->{environment}->{total}++;
-    
-    # Error if not present:
-    #    No Environmental Problems found
-    if ($content !~ /No Environmental Problems found/msi) {
-        $self->{output}->output_add(severity => 'CRITICAL',
-                                    short_msg => sprintf("environment problem detected"));
-    } else {
-        $self->{output}->output_add(long_msg => sprintf("no environment problem detected"));
-    }
-}
-
-1;

storage/emc/symmetrix/dmx34/local/mode/components/fru.pm

@@ -0,0 +1,75 @@
+#
+# Copyright 2016 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package storage::emc::symmetrix::dmx34::local::mode::components::fru;
+
+use base qw(centreon::plugins::mode);
+
+use strict;
+use warnings;
+use centreon::plugins::misc;
+
+#FRU status (alarms) table:
+#
+#+---------------------+--------------------+-----------+
+#| Description         | FRU/Alarm Status   | Comm.     |
+#+---------------------+--------------------+-----------+
+#| Dir 01              | OK                 | 01A       |
+#| Dir 02              | OK                 | 02A       |
+#...
+#| Backplane           | OK                 | 01A,16A   |
+#+---------------------+--------------------+-----------+
+#| Description         | FRU/Alarm Status   | Comm.     |
+#+---------------------+--------------------+-----------+
+#
+#
+#Analog readings:
+
+sub check {
+    my ($self) = @_;
+
+    $self->{output}->output_add(long_msg => "Checking frus");
+    $self->{components}->{fru} = {name => 'frus', total => 0, skip => 0};
+    return if ($self->check_filter(section => 'fru'));
+    
+    if ($self->{content_file_health_env} !~ /FRU status .*? table:.*?---------.*?Description.*?---------.*?\n(.*?\n)\+---------/msi) {
+        $self->{output}->output_add(long_msg => 'skipping: cannot find frus');
+        return ;
+    }
+    
+    my $content = $1;
+    while ($content =~ /^\|(.*?)\|(.*?)\|.*?\n/msig) {
+        my ($fru, $status) = (centreon::plugins::misc::trim($1), centreon::plugins::misc::trim($2));
+
+        next if ($self->check_filter(section => 'fru', instance => $fru));
+        $self->{components}->{fru}->{total}++;
+            
+        $self->{output}->output_add(long_msg => sprintf("fru '%s' status is '%s'", 
+                                                        $fru, $status));
+        my $exit = $self->get_severity(section => 'fru', value => $status);
+        if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+            $self->{output}->output_add(severity => $exit,
+                                        short_msg => sprintf("Fru '%s' status is '%s'", 
+                                                             $fru, $status));
+        }
+    }
+}
+
+1;

storage/emc/symmetrix/dmx34/local/mode/hardware.pm

@@ -54,10 +54,14 @@ sub set_system {
             ['\.\./.*', 'OK'],
             ['.*', 'CRITICAL'],
         ],
+        fru => [
+            ['OK', 'OK'],
+            ['.*', 'CRITICAL'],
+        ],
     };
     
     $self->{components_path} = 'storage::emc::symmetrix::dmx34::local::mode::components';
-    $self->{components_module} = ['director', 'xcm', 'disk', 'memory', 'config', 'environment', 'test'];
+    $self->{components_module} = ['director', 'xcm', 'disk', 'memory', 'config', 'test', 'fru'];
 }
 
 sub check_options {
@@ -100,17 +104,19 @@ sub read_files {
         $self->{output}->add_option_msg(short_msg => "Please set option --file-health and --file-health-env.");
         $self->{output}->option_exit();
     }
-    $self->{content_file_health} = do {
-        local $/ = undef;
-        if (!open my $fh, "<", $self->{option_results}->{file_health}) {
-            $self->{output}->add_option_msg(short_msg => "Could not open file $self->{option_results}->{file_health} : $!");
-            $self->{output}->option_exit();
-        }
-        <$fh>;
-    };
     
-    # We remove color syntax
-    $self->{content_file_health} =~ s/\x{1b}\[.*?m|\r//msg;
+    foreach (('file_health', 'file_health_env')) {
+        $self->{'content_' . $_} = do {
+            local $/ = undef;
+            if (!open my $fh, "<", $self->{option_results}->{$_}) {
+                $self->{output}->add_option_msg(short_msg => "Could not open file $self->{option_results}->{$_} : $!");
+                $self->{output}->option_exit();
+            }
+            <$fh>;
+        };
+        # We remove color syntax
+        $self->{'content_' . $_} =~ s/\x{1b}\[.*?m|\r//msg;
+    }
     
     # *****************************************************************
     #*            Health Check Run From Scheduler        Version 2.0 *
@@ -247,7 +253,7 @@ Check hardware.
 =item B<--component>
 
 Which component to check (Default: '.*').
-Can be: 'director', 'xcm', 'disk', 'memory', 'config', 'environment', 'test'
+Can be: 'director', 'xcm', 'disk', 'memory', 'config', 'fru', 'test'
 
 =item B<--filter>