Fix #409
This commit is contained in:
parent
b00491024d
commit
38e6cef13b
|
@ -20,225 +20,280 @@
|
|||
|
||||
package hardware::pdu::apc::snmp::mode::load;
|
||||
|
||||
use base qw(centreon::plugins::mode);
|
||||
use base qw(centreon::plugins::templates::counter);
|
||||
|
||||
use strict;
|
||||
use warnings;
|
||||
use centreon::plugins::misc;
|
||||
use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold);
|
||||
|
||||
my $thresholds = {
|
||||
load => [
|
||||
['phaseLoadNormal', 'OK'],
|
||||
['phaseLoadLow', 'WARNING'],
|
||||
['phaseLoadNearOverload', 'WARNING'],
|
||||
['phaseLoadOverload', 'CRITICAL'],
|
||||
],
|
||||
};
|
||||
my %map_status = (
|
||||
1 => 'phaseLoadNormal',
|
||||
2 => 'phaseLoadLow',
|
||||
3 => 'phaseLoadNearOverload',
|
||||
4 => 'phaseLoadOverload',
|
||||
);
|
||||
sub custom_status_output {
|
||||
my ($self, %options) = @_;
|
||||
|
||||
my $msg = 'status : ' . $self->{result_values}->{status};
|
||||
return $msg;
|
||||
}
|
||||
|
||||
sub custom_status_calc {
|
||||
my ($self, %options) = @_;
|
||||
|
||||
$self->{result_values}->{status} = $options{new_datas}->{$self->{instance} . '_status'};
|
||||
$self->{result_values}->{display} = $options{new_datas}->{$self->{instance} . '_display'};
|
||||
return 0;
|
||||
}
|
||||
|
||||
sub set_counters {
|
||||
my ($self, %options) = @_;
|
||||
|
||||
$self->{maps_counters_type} = [
|
||||
{ name => 'device', type => 1, cb_prefix_output => 'prefix_device_output', message_multiple => 'All devices are ok', skipped_code => { -10 => 1 } },
|
||||
{ name => 'bank', type => 1, cb_prefix_output => 'prefix_bank_output', message_multiple => 'All banks are ok', skipped_code => { -10 => 1 } },
|
||||
{ name => 'phase', type => 1, cb_prefix_output => 'prefix_phase_output', message_multiple => 'All phases are ok', skipped_code => { -10 => 1 } }
|
||||
];
|
||||
|
||||
$self->{maps_counters}->{bank} = [
|
||||
{ label => 'bank-status', threshold => 0, set => {
|
||||
key_values => [ { name => 'status' }, { name => 'display' } ],
|
||||
closure_custom_calc => $self->can('custom_status_calc'),
|
||||
closure_custom_output => $self->can('custom_status_output'),
|
||||
closure_custom_perfdata => sub { return 0; },
|
||||
closure_custom_threshold_check => \&catalog_status_threshold,
|
||||
}
|
||||
},
|
||||
{ label => 'current', nlabel => 'bank.current.ampere', set => {
|
||||
key_values => [ { name => 'current' }, { name => 'display' } ],
|
||||
output_template => 'current : %s A',
|
||||
perfdatas => [
|
||||
{ label => 'current_bank', template => '%s', value => 'current_absolute',
|
||||
unit => 'A', min => 0, label_extra_instance => 1, instance_use => 'display_absolute' },
|
||||
],
|
||||
}
|
||||
},
|
||||
];
|
||||
|
||||
$self->{maps_counters}->{phase} = [
|
||||
{ label => 'phase-status', threshold => 0, set => {
|
||||
key_values => [ { name => 'status' }, { name => 'display' } ],
|
||||
closure_custom_calc => $self->can('custom_status_calc'),
|
||||
closure_custom_output => $self->can('custom_status_output'),
|
||||
closure_custom_perfdata => sub { return 0; },
|
||||
closure_custom_threshold_check => \&catalog_status_threshold,
|
||||
}
|
||||
},
|
||||
{ label => 'current', nlabel => 'phase.current.ampere', set => {
|
||||
key_values => [ { name => 'current' }, { name => 'display' } ],
|
||||
output_template => 'current : %s A',
|
||||
perfdatas => [
|
||||
{ label => 'current_phase', template => '%s', value => 'current_absolute',
|
||||
unit => 'A', min => 0, label_extra_instance => 1, instance_use => 'display_absolute' },
|
||||
],
|
||||
}
|
||||
},
|
||||
{ label => 'power', nlabel => 'phase.power.watt', set => {
|
||||
key_values => [ { name => 'power' }, { name => 'display' } ],
|
||||
output_template => 'power : %s W',
|
||||
perfdatas => [
|
||||
{ label => 'power_phase', template => '%s', value => 'power_absolute',
|
||||
unit => 'W', min => 0, label_extra_instance => 1, instance_use => 'display_absolute' },
|
||||
],
|
||||
}
|
||||
},
|
||||
];
|
||||
|
||||
$self->{maps_counters}->{device} = [
|
||||
{ label => 'power', nlabel => 'device.power.watt', set => {
|
||||
key_values => [ { name => 'power' }, { name => 'display' } ],
|
||||
output_template => 'power : %s W',
|
||||
perfdatas => [
|
||||
{ label => 'power_phase', template => '%s', value => 'power_absolute',
|
||||
unit => 'W', min => 0, label_extra_instance => 1, instance_use => 'display_absolute' },
|
||||
],
|
||||
}
|
||||
},
|
||||
];
|
||||
}
|
||||
|
||||
sub prefix_bank_output {
|
||||
my ($self, %options) = @_;
|
||||
|
||||
return "Bank '" . $options{instance_value}->{display} . "' ";
|
||||
}
|
||||
|
||||
sub prefix_phase_output {
|
||||
my ($self, %options) = @_;
|
||||
|
||||
return "Phase '" . $options{instance_value}->{display} . "' ";
|
||||
}
|
||||
|
||||
sub prefix_device_output {
|
||||
my ($self, %options) = @_;
|
||||
|
||||
return "Device '" . $options{instance_value}->{display} . "' ";
|
||||
}
|
||||
|
||||
sub new {
|
||||
my ($class, %options) = @_;
|
||||
my $self = $class->SUPER::new(package => __PACKAGE__, %options);
|
||||
my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
|
||||
bless $self, $class;
|
||||
|
||||
$self->{version} = '1.0';
|
||||
$options{options}->add_options(arguments =>
|
||||
{
|
||||
"filter:s@" => { name => 'filter' },
|
||||
"threshold-overload:s@" => { name => 'threshold_overload' },
|
||||
"warning:s@" => { name => 'warning' },
|
||||
"critical:s@" => { name => 'critical' },
|
||||
});
|
||||
$options{options}->add_options(arguments => {
|
||||
"unknown-bank-status:s" => { name => 'unknown_bank_status', default => '' },
|
||||
"warning-bank-status:s" => { name => 'warning_bank_status', default => '%{status} =~ /low|nearOverload/i' },
|
||||
"critical-bank-status:s" => { name => 'critical_bank_status', default => '%{status} =~ /^overload/i' },
|
||||
"unknown-phase-status:s" => { name => 'unknown_phase_status', default => '' },
|
||||
"warning-phase-status:s" => { name => 'warning_phase_status', default => '%{status} =~ /low|nearOverload/i' },
|
||||
"critical-phase-status:s" => { name => 'critical_phase_status', default => '%{status} =~ /^overload/i' },
|
||||
});
|
||||
|
||||
return $self;
|
||||
}
|
||||
|
||||
sub check_options {
|
||||
my ($self, %options) = @_;
|
||||
$self->SUPER::init(%options);
|
||||
|
||||
$self->{filter} = [];
|
||||
foreach my $val (@{$self->{option_results}->{filter}}) {
|
||||
next if (!defined($val) || $val eq '');
|
||||
my @values = split (/,/, $val);
|
||||
push @{$self->{filter}}, { filter => $values[0], instance => $values[1] };
|
||||
}
|
||||
|
||||
$self->{overload_th} = {};
|
||||
foreach my $val (@{$self->{option_results}->{threshold_overload}}) {
|
||||
next if (!defined($val) || $val eq '');
|
||||
my @values = split (/,/, $val);
|
||||
if (scalar(@values) < 3) {
|
||||
$self->{output}->add_option_msg(short_msg => "Wrong threshold-overload option '" . $val . "'.");
|
||||
$self->{output}->option_exit();
|
||||
}
|
||||
my ($section, $instance, $status, $filter);
|
||||
if (scalar(@values) == 3) {
|
||||
($section, $status, $filter) = @values;
|
||||
$instance = '.*';
|
||||
} else {
|
||||
($section, $instance, $status, $filter) = @values;
|
||||
}
|
||||
if ($section !~ /^load$/) {
|
||||
$self->{output}->add_option_msg(short_msg => "Wrong threshold-overload section '" . $val . "'.");
|
||||
$self->{output}->option_exit();
|
||||
}
|
||||
if ($self->{output}->is_litteral_status(status => $status) == 0) {
|
||||
$self->{output}->add_option_msg(short_msg => "Wrong threshold-overload status '" . $val . "'.");
|
||||
$self->{output}->option_exit();
|
||||
}
|
||||
$self->{overload_th}->{$section} = [] if (!defined($self->{overload_th}->{$section}));
|
||||
push @{$self->{overload_th}->{$section}}, {filter => $filter, status => $status, instance => $instance };
|
||||
}
|
||||
|
||||
$self->{numeric_threshold} = {};
|
||||
foreach my $option (('warning', 'critical')) {
|
||||
foreach my $val (@{$self->{option_results}->{$option}}) {
|
||||
next if (!defined($val) || $val eq '');
|
||||
if ($val !~ /^(.*?),(.*?),(.*)$/) {
|
||||
$self->{output}->add_option_msg(short_msg => "Wrong $option option '" . $val . "'.");
|
||||
$self->{output}->option_exit();
|
||||
}
|
||||
my ($section, $instance, $value) = ($1, $2, $3);
|
||||
if ($section !~ /^load$/) {
|
||||
$self->{output}->add_option_msg(short_msg => "Wrong $option option '" . $val . "'.");
|
||||
$self->{output}->option_exit();
|
||||
}
|
||||
my $position = 0;
|
||||
if (defined($self->{numeric_threshold}->{$section})) {
|
||||
$position = scalar(@{$self->{numeric_threshold}->{$section}});
|
||||
}
|
||||
if (($self->{perfdata}->threshold_validate(label => $option . '-' . $section . '-' . $position, value => $value)) == 0) {
|
||||
$self->{output}->add_option_msg(short_msg => "Wrong $option threshold '" . $value . "'.");
|
||||
$self->{output}->option_exit();
|
||||
}
|
||||
$self->{numeric_threshold}->{$section} = [] if (!defined($self->{numeric_threshold}->{$section}));
|
||||
push @{$self->{numeric_threshold}->{$section}}, { label => $option . '-' . $section . '-' . $position, threshold => $option, instance => $instance };
|
||||
}
|
||||
}
|
||||
$self->SUPER::check_options(%options);
|
||||
|
||||
$self->change_macros(macros => [
|
||||
'warning_bank_status', 'critical_bank_status', 'unknown_bank_status',
|
||||
'warning_phase_status', 'critical_phase_status', 'unknown_phase_status',
|
||||
]);
|
||||
}
|
||||
|
||||
my $mapping = {
|
||||
rPDULoadStatusLoad => { oid => '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.2' },
|
||||
rPDULoadStatusLoadState => { oid => '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.3', map => \%map_status },
|
||||
rPDULoadStatusPhaseNumber => { oid => '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.4' },
|
||||
rPDULoadStatusBankNumber => { oid => '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.5' },
|
||||
my $map_rpdu_status = {
|
||||
1 => 'normal',
|
||||
2 => 'low',
|
||||
3 => 'nearOverload',
|
||||
4 => 'overload',
|
||||
};
|
||||
|
||||
sub run {
|
||||
sub check_rpdu {
|
||||
my ($self, %options) = @_;
|
||||
$self->{snmp} = $options{snmp};
|
||||
|
||||
return if (scalar(keys %{$self->{phase}}) > 0);
|
||||
|
||||
my $mapping = {
|
||||
rPDULoadStatusLoad => { oid => '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.2' },
|
||||
rPDULoadStatusLoadState => { oid => '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.3', map => $map_rpdu_status },
|
||||
rPDULoadStatusPhaseNumber => { oid => '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.4' },
|
||||
rPDULoadStatusBankNumber => { oid => '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.5' }, # Bank 0 = no bank (phase total)
|
||||
};
|
||||
|
||||
my $oid_rPDULoadStatusEntry = '.1.3.6.1.4.1.318.1.1.12.2.3.1.1';
|
||||
my $snmp_result = $options{snmp}->get_table(oid => $oid_rPDULoadStatusEntry, nothing_quit => 1);
|
||||
|
||||
$self->{results} = $self->{snmp}->get_table(oid => $oid_rPDULoadStatusEntry, nothing_quit => 1);
|
||||
|
||||
$self->{output}->output_add(severity => 'OK',
|
||||
short_msg => 'All phase/bank loads are ok');
|
||||
foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}})) {
|
||||
foreach my $oid (keys %{$snmp_result}) {
|
||||
next if ($oid !~ /^$mapping->{rPDULoadStatusLoadState}->{oid}\.(.*)$/);
|
||||
my $instance = $1;
|
||||
my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}, instance => $instance);
|
||||
|
||||
next if ($self->check_filter(section => 'load', instance => $instance));
|
||||
my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => $instance);
|
||||
|
||||
$self->{output}->output_add(long_msg => sprintf("Phase '%s' on Bank '%s' status is '%s' [instance: %s, value: %s]",
|
||||
$result->{rPDULoadStatusPhaseNumber}, $result->{rPDULoadStatusBankNumber}, $result->{rPDULoadStatusLoadState},
|
||||
$instance, defined($result->{rPDULoadStatusLoad}) ? $result->{rPDULoadStatusLoad} : '-'));
|
||||
my $exit = $self->get_severity(section => 'load', instance => $instance, value => $result->{rPDULoadStatusLoadState});
|
||||
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
|
||||
$self->{output}->output_add(severity => $exit,
|
||||
short_msg => sprintf("Phase '%s' on Bank '%s' status is '%s'",
|
||||
$result->{rPDULoadStatusPhaseNumber}, $result->{rPDULoadStatusBankNumber}, $result->{rPDULoadStatusLoadState}));
|
||||
}
|
||||
|
||||
if (defined($result->{rPDULoadStatusLoad}) && $result->{rPDULoadStatusLoad} =~ /[0-9]/) {
|
||||
$result->{rPDULoadStatusLoad} /= 10;
|
||||
my ($exit2, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'load', instance => $instance, value => $result->{rPDULoadStatusLoad});
|
||||
if (!$self->{output}->is_status(value => $exit2, compare => 'ok', litteral => 1)) {
|
||||
$self->{output}->output_add(severity => $exit2,
|
||||
short_msg => sprintf("Phase '%s' on Bank '%s' load is %s A",
|
||||
$result->{rPDULoadStatusPhaseNumber}, $result->{rPDULoadStatusBankNumber}, $result->{rPDULoadStatusLoad}));
|
||||
}
|
||||
$self->{output}->perfdata_add(label => 'load_bank_' . $result->{rPDULoadStatusBankNumber} . '_phase_' . $result->{rPDULoadStatusPhaseNumber}, unit => 'A',
|
||||
value => $result->{rPDULoadStatusLoad},
|
||||
warning => $warn,
|
||||
critical => $crit,
|
||||
min => 0);
|
||||
if ($result->{rPDULoadStatusBankNumber} == 0) {
|
||||
$self->{phase}->{$result->{rPDULoadStatusPhaseNumber}} = {
|
||||
display => $result->{rPDULoadStatusPhaseNumber},
|
||||
status => $result->{rPDULoadStatusLoadState},
|
||||
current => $result->{rPDULoadStatusLoad} / 10,
|
||||
};
|
||||
} else {
|
||||
$self->{bank}->{$result->{rPDULoadStatusBankNumber}} = { display => $result->{rPDULoadStatusBankNumber}, current => 0 }
|
||||
if (!defined($self->{bank}->{$result->{rPDULoadStatusBankNumber}}));
|
||||
$self->{bank}->{$result->{rPDULoadStatusBankNumber}}->{status} = $result->{rPDULoadStatusLoadState};
|
||||
$self->{bank}->{$result->{rPDULoadStatusBankNumber}}->{current} += $result->{rPDULoadStatusLoad} / 10;
|
||||
}
|
||||
}
|
||||
|
||||
$self->{output}->display();
|
||||
$self->{output}->exit();
|
||||
my $oid_rPDUIdentName = '.1.3.6.1.4.1.318.1.1.12.1.1.0';
|
||||
my $oid_rPDUIdentDevicePowerWatts = '.1.3.6.1.4.1.318.1.1.12.1.16.0';
|
||||
$snmp_result = $options{snmp}->get_leef(oids => [$oid_rPDUIdentName, $oid_rPDUIdentDevicePowerWatts]);
|
||||
$self->{device}->{0} = {
|
||||
display => $snmp_result->{$oid_rPDUIdentName},
|
||||
power => $snmp_result->{$oid_rPDUIdentDevicePowerWatts} * 10,
|
||||
};
|
||||
}
|
||||
|
||||
sub check_filter {
|
||||
my $map_rpdu2_status = {
|
||||
1 => 'low',
|
||||
2 => 'normal',
|
||||
3 => 'nearOverload',
|
||||
4 => 'overload',
|
||||
};
|
||||
|
||||
sub check_rpdu2 {
|
||||
my ($self, %options) = @_;
|
||||
|
||||
foreach (@{$self->{filter}}) {
|
||||
if ($options{section} =~ /$_->{filter}/) {
|
||||
if (!defined($options{instance}) && !defined($_->{instance})) {
|
||||
$self->{output}->output_add(long_msg => sprintf("Skipping $options{section} section."));
|
||||
return 1;
|
||||
} elsif (defined($options{instance}) && $options{instance} =~ /$_->{instance}/) {
|
||||
$self->{components}->{$options{section}}->{skip}++ if (defined($self->{components}->{$options{section}}));
|
||||
$self->{output}->output_add(long_msg => sprintf("Skipping $options{section} section $options{instance} instance."));
|
||||
return 1;
|
||||
}
|
||||
my $mapping_phase = {
|
||||
rPDU2PhaseStatusNumber => { oid => '.1.3.6.1.4.1.318.1.1.26.6.3.1.3' },
|
||||
rPDU2PhaseStatusLoadState => { oid => '.1.3.6.1.4.1.318.1.1.26.6.3.1.4', map => $map_rpdu2_status },
|
||||
rPDU2PhaseStatusCurrent => { oid => '.1.3.6.1.4.1.318.1.1.26.6.3.1.5' },
|
||||
rPDU2PhaseStatusPower => { oid => '.1.3.6.1.4.1.318.1.1.26.6.3.1.7' },
|
||||
};
|
||||
my $mapping_bank = {
|
||||
rPDU2BankStatusNumber => { oid => '.1.3.6.1.4.1.318.1.1.26.8.3.1.3' },
|
||||
rPDU2BankStatusLoadState => { oid => '.1.3.6.1.4.1.318.1.1.26.8.3.1.4', map => $map_rpdu2_status },
|
||||
rPDU2BankStatusCurrent => { oid => '.1.3.6.1.4.1.318.1.1.26.8.3.1.5' },
|
||||
};
|
||||
my $mapping_device = {
|
||||
rPDU2DeviceStatusName => { oid => '.1.3.6.1.4.1.318.1.1.26.4.3.1.3' },
|
||||
rPDU2DeviceStatusPower => { oid => '.1.3.6.1.4.1.318.1.1.26.4.3.1.5' },
|
||||
};
|
||||
|
||||
my $oid_rPDU2DeviceStatusEntry = '.1.3.6.1.4.1.318.1.1.26.4.3.1';
|
||||
my $oid_rPDU2PhaseStatusEntry = '.1.3.6.1.4.1.318.1.1.26.6.3.1';
|
||||
my $oid_rPDU2BankStatusEntry = '.1.3.6.1.4.1.318.1.1.26.8.3.1';
|
||||
my $snmp_result = $options{snmp}->get_multiple_table(oids => [
|
||||
{ oid => $oid_rPDU2PhaseStatusEntry, end => $mapping_phase->{rPDU2PhaseStatusPower}->{oid} },
|
||||
{ oid => $oid_rPDU2BankStatusEntry, end => $mapping_bank->{rPDU2BankStatusCurrent}->{oid} },
|
||||
{ oid => $oid_rPDU2DeviceStatusEntry, end => $mapping_bank->{rPDU2DeviceStatusPower}->{oid} },
|
||||
]);
|
||||
|
||||
foreach my $oid (keys %{$snmp_result->{$oid_rPDU2PhaseStatusEntry}}) {
|
||||
next if ($oid !~ /^$mapping_phase->{rPDU2PhaseStatusLoadState}->{oid}\.(.*)$/);
|
||||
my $instance = $1;
|
||||
my $result = $options{snmp}->map_instance(mapping => $mapping_phase, results => $snmp_result->{$oid_rPDU2PhaseStatusEntry}, instance => $instance);
|
||||
|
||||
$self->{phase}->{$result->{rPDU2PhaseStatusNumber}} = {
|
||||
display => $result->{rPDU2PhaseStatusNumber},
|
||||
status => $result->{rPDU2PhaseStatusLoadState},
|
||||
current => $result->{rPDU2PhaseStatusCurrent} / 10,
|
||||
power => $result->{rPDU2PhaseStatusPower} * 10, # hundreth of kW. So * 10 for watt
|
||||
}
|
||||
}
|
||||
|
||||
foreach my $oid (keys %{$snmp_result->{$oid_rPDU2BankStatusEntry}}) {
|
||||
next if ($oid !~ /^$mapping_phase->{rPDU2BankStatusLoadState}->{oid}\.(.*)$/);
|
||||
my $instance = $1;
|
||||
my $result = $options{snmp}->map_instance(mapping => $mapping_bank, results => $snmp_result->{$oid_rPDU2BankStatusEntry}, instance => $instance);
|
||||
|
||||
$self->{bank}->{$result->{rPDU2BankStatusNumber}} = {
|
||||
display => $result->{rPDU2BankStatusNumber},
|
||||
status => $result->{rPDU2BankStatusLoadState},
|
||||
current => $result->{rPDU2BankStatusCurrent} / 10,
|
||||
}
|
||||
}
|
||||
|
||||
foreach my $oid (keys %{$snmp_result->{$oid_rPDU2DeviceStatusEntry}}) {
|
||||
next if ($oid !~ /^$mapping_device->{rPDU2DeviceStatusPower}->{oid}\.(.*)$/);
|
||||
my $instance = $1;
|
||||
my $result = $options{snmp}->map_instance(mapping => $mapping_device, results => $snmp_result->{$oid_rPDU2DeviceStatusEntry}, instance => $instance);
|
||||
|
||||
$self->{device}->{$result->{rPDU2DeviceStatusName}} = {
|
||||
display => $result->{rPDU2DeviceStatusName},
|
||||
power => $result->{rPDU2DeviceStatusPower} * 10,
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
sub get_severity_numeric {
|
||||
sub manage_selection {
|
||||
my ($self, %options) = @_;
|
||||
my $status = 'OK'; # default
|
||||
my $thresholds = { warning => undef, critical => undef };
|
||||
my $checked = 0;
|
||||
|
||||
if (defined($self->{numeric_threshold}->{$options{section}})) {
|
||||
my $exits = [];
|
||||
foreach (@{$self->{numeric_threshold}->{$options{section}}}) {
|
||||
if ($options{instance} =~ /$_->{instance}/) {
|
||||
push @{$exits}, $self->{perfdata}->threshold_check(value => $options{value}, threshold => [ { label => $_->{label}, exit_litteral => $_->{threshold} } ]);
|
||||
$thresholds->{$_->{threshold}} = $self->{perfdata}->get_perfdata_for_output(label => $_->{label});
|
||||
$checked = 1;
|
||||
}
|
||||
}
|
||||
$status = $self->{output}->get_most_critical(status => $exits) if (scalar(@{$exits}) > 0);
|
||||
}
|
||||
|
||||
return ($status, $thresholds->{warning}, $thresholds->{critical}, $checked);
|
||||
}
|
||||
|
||||
sub get_severity {
|
||||
my ($self, %options) = @_;
|
||||
my $status = 'UNKNOWN'; # default
|
||||
$self->{bank} = {};
|
||||
$self->{phase} = {};
|
||||
$self->{device} = {};
|
||||
|
||||
if (defined($self->{overload_th}->{$options{section}})) {
|
||||
foreach (@{$self->{overload_th}->{$options{section}}}) {
|
||||
if ($options{value} =~ /$_->{filter}/i &&
|
||||
(!defined($options{instance}) || $options{instance} =~ /$_->{instance}/)) {
|
||||
$status = $_->{status};
|
||||
return $status;
|
||||
}
|
||||
}
|
||||
}
|
||||
my $label = defined($options{label}) ? $options{label} : $options{section};
|
||||
foreach (@{$thresholds->{$label}}) {
|
||||
if ($options{value} =~ /$$_[0]/i) {
|
||||
$status = $$_[1];
|
||||
return $status;
|
||||
}
|
||||
}
|
||||
$self->check_rpdu2(%options);
|
||||
$self->check_rpdu(%options);
|
||||
|
||||
return $status;
|
||||
if (scalar(keys %{$self->{device}}) <= 0) {
|
||||
$self->{output}->add_option_msg(short_msg => "No device found.");
|
||||
$self->{output}->option_exit();
|
||||
}
|
||||
}
|
||||
|
||||
1;
|
||||
|
@ -247,30 +302,45 @@ __END__
|
|||
|
||||
=head1 MODE
|
||||
|
||||
Check phase/bank load state.
|
||||
Check phase/bank load.
|
||||
|
||||
=over 8
|
||||
|
||||
=item B<--filter>
|
||||
=item B<--unknown-bank-status>
|
||||
|
||||
Exclude some parts (comma seperated list)
|
||||
Can also exclude specific instance: --filter=load,1
|
||||
Set warning threshold for status.
|
||||
Can used special variables like: %{type}, %{status}, %{display}
|
||||
|
||||
=item B<--threshold-overload>
|
||||
=item B<--warning-bank-status>
|
||||
|
||||
Set to overload default threshold values (syntax: section,[instance,]status,regexp)
|
||||
It used before default thresholds (order stays).
|
||||
Example: --threshold-overload='load,CRITICAL,^(?!(PhaseLoadNormal)$)'
|
||||
Set warning threshold for status (Default: '%{status} =~ /low|nearOverload/i').
|
||||
Can used special variables like: %{type}, %{status}, %{display}
|
||||
|
||||
=item B<--warning>
|
||||
=item B<--critical-bank-status>
|
||||
|
||||
Set warning threshold for temperatures (syntax: type,instance,threshold)
|
||||
Example: --warning='load,.*,30'
|
||||
Set critical threshold for status (Default: '%{status} =~ /^overload/').
|
||||
Can used special variables like: %{type}, %{status}, %{display}
|
||||
|
||||
=item B<--critical>
|
||||
=item B<--unknown-phase-status>
|
||||
|
||||
Set warning threshold for status.
|
||||
Can used special variables like: %{status}, %{display}
|
||||
|
||||
=item B<--warning-pĥase-status>
|
||||
|
||||
Set warning threshold for status (Default: '%{status} =~ /low|nearOverload/i').
|
||||
Can used special variables like: %{status}, %{display}
|
||||
|
||||
=item B<--critical-phase-status>
|
||||
|
||||
Set critical threshold for status (Default: '%{status} =~ /^overload/i').
|
||||
Can used special variables like: %{status}, %{display}
|
||||
|
||||
=item B<--warning-*> =item B<--critical-*>
|
||||
|
||||
Thresholds.
|
||||
Can be: 'current', 'power'.
|
||||
|
||||
Set critical threshold for temperatures (syntax: type,instance,threshold)
|
||||
Example: --critical='load,.*,40'
|
||||
=back
|
||||
|
||||
=cut
|
||||
|
|
Loading…
Reference in New Issue