diff --git a/centreon/common/avaya/snmp/mode/cpu.pm b/centreon/common/avaya/snmp/mode/cpu.pm
new file mode 100644
index 000000000..a76432b1e
--- /dev/null
+++ b/centreon/common/avaya/snmp/mode/cpu.pm
@@ -0,0 +1,120 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package centreon::common::avaya::snmp::mode::cpu;
+
+use base qw(centreon::plugins::templates::counter);
+
+use strict;
+use warnings;
+
+sub set_counters {
+    my ($self, %options) = @_;
+    
+    $self->{maps_counters_type} = [
+        { name => 'cpu', type => 1, cb_prefix_output => 'prefix_cpu_output', message_multiple => 'All CPUs are ok' },
+    ];
+    
+    $self->{maps_counters}->{cpu} = [
+        { label => 'usage', nlabel => 'cpu.utilization.percentage', set => {
+                key_values => [ { name => 'cpu' }, { name => 'display' } ],
+                output_template => 'usage : %s %%',
+                perfdatas => [
+                    { label => 'cpu_usage', value => 'cpu_absolute',  template => '%s',
+                      unit => '%', min => 0, max => 100, label_extra_instance => 1, instance_use => 'display_absolute' },
+                ],
+            }
+        },
+    ];
+}
+
+sub prefix_cpu_output {
+    my ($self, %options) = @_;
+    
+    return "CPU '" . $options{instance_value}->{display} . "' ";
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
+    bless $self, $class;
+    
+    $self->{version} = '1.0';
+    $options{options}->add_options(arguments => {
+    });
+    
+    return $self;
+}
+
+my $map_cpu_monitoring = { 1 => 'disabled', 2 => 'enabled' };
+
+my $mapping = {
+    genCpuUtilizationEnableMonitoring   => { oid => '.1.3.6.1.4.1.6889.2.1.11.1.1.1.1.2', map => $map_cpu_monitoring },
+    genCpuAverageUtilization            => { oid => '.1.3.6.1.4.1.6889.2.1.11.1.1.1.1.5' },
+};
+
+sub manage_selection {
+    my ($self, %options) = @_;
+    
+    my $oid_genCpuUtilizationEntry = '.1.3.6.1.4.1.6889.2.1.11.1.1.1.1';
+    my $results = $options{snmp}->get_table(oid => $oid_genCpuUtilizationEntry, nothing_quit => 1);
+    $self->{cpu} = {};
+    foreach my $oid (keys %{$results}) {
+        next if ($oid !~ /^$mapping->{genCpuAverageUtilization}->{oid}\.(.*)/);
+        my $instance = $1;
+        my $result = $options{snmp}->map_instance(mapping => $mapping, results => $results, instance => $instance);
+        
+        if ($result->{genCpuUtilizationEnableMonitoring} eq 'disabled') {
+            next;
+        }
+
+        $self->{cpu}->{$instance} = {
+            display => $instance,
+            cpu => $result->{genCpuAverageUtilization},
+        };
+    }
+    
+    if (scalar(keys %{$self->{cpu}}) <= 0) {
+        $self->{output}->add_option_msg(short_msg => "No entry found (or cpu monitoring is disabled).");
+        $self->{output}->option_exit();
+    }
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check CPU usage.
+
+=over 8
+
+=item B<--warning-usage>
+
+Threshold warning.
+
+=item B<--critical-usage>
+
+Threshold critical.
+
+=back
+
+=cut
diff --git a/centreon/common/avaya/snmp/mode/memory.pm b/centreon/common/avaya/snmp/mode/memory.pm
new file mode 100644
index 000000000..5ad0144e7
--- /dev/null
+++ b/centreon/common/avaya/snmp/mode/memory.pm
@@ -0,0 +1,166 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package centreon::common::avaya::snmp::mode::memory;
+
+use base qw(centreon::plugins::templates::counter);
+
+use strict;
+use warnings;
+
+sub custom_usage_perfdata {
+    my ($self, %options) = @_;
+
+    $self->{output}->perfdata_add(
+        label => 'used', unit => 'B',
+        nlabel =>  $self->{nlabel},
+        instances => $self->use_instances(extra_instance => $options{extra_instance}) ? $self->{result_values}->{display} : undef,
+        value => $self->{result_values}->{used},
+        warning => $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{thlabel}, total => $self->{result_values}->{total}, cast_int => 1),
+        critical => $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{thlabel}, total => $self->{result_values}->{total}, cast_int => 1),
+        min => 0, max => $self->{result_values}->{total}
+    );
+}
+
+sub custom_usage_threshold {
+    my ($self, %options) = @_;
+    
+    my $exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{prct_used}, threshold => [ { label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, { label => 'warning-' . $self->{thlabel}, exit_litteral => 'warning' } ]);
+    return $exit;
+}
+
+sub custom_usage_output {
+    my ($self, %options) = @_;
+    
+    my ($total_size_value, $total_size_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{total});
+    my ($total_used_value, $total_used_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{used});
+    my ($total_free_value, $total_free_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{free});
+    
+    my $msg = sprintf("Total: %s Used: %s (%.2f%%) Free: %s (%.2f%%)",
+                      $total_size_value . " " . $total_size_unit,
+                      $total_used_value . " " . $total_used_unit, $self->{result_values}->{prct_used},
+                      $total_free_value . " " . $total_free_unit, $self->{result_values}->{prct_free});
+    return $msg;
+}
+
+sub custom_usage_calc {
+    my ($self, %options) = @_;
+
+    $self->{result_values}->{display} = $options{new_datas}->{$self->{instance} . '_display'};
+    $self->{result_values}->{total} = $options{new_datas}->{$self->{instance} . '_total'};
+    $self->{result_values}->{used} = $options{new_datas}->{$self->{instance} . '_used'};
+    $self->{result_values}->{free} = $self->{result_values}->{total} - $self->{result_values}->{used};
+    $self->{result_values}->{prct_free} = $self->{result_values}->{free} * 100 / $self->{result_values}->{total};
+    $self->{result_values}->{prct_used} = $self->{result_values}->{used} * 100 / $self->{result_values}->{total};
+    return 0;
+}
+
+sub set_counters {
+    my ($self, %options) = @_;
+    
+    $self->{maps_counters_type} = [
+        { name => 'memory', type => 1, cb_prefix_output => 'prefix_memory_output', message_multiple => 'All memory usages are ok' }
+    ];
+    
+    $self->{maps_counters}->{memory} = [
+        { label => 'usage', nlabel => 'memory.usage.bytes', set => {
+                key_values => [ { name => 'display' }, { name => 'total' }, { name => 'used' } ],
+                closure_custom_calc => $self->can('custom_usage_calc'),
+                closure_custom_output => $self->can('custom_usage_output'),
+                closure_custom_perfdata => $self->can('custom_usage_perfdata'),
+                closure_custom_threshold_check => $self->can('custom_usage_threshold'),
+            }
+        },
+    ];
+}
+
+sub prefix_memory_output {
+    my ($self, %options) = @_;
+    
+    if ($self->{multiple} == 1) {
+        return "Memory '" . $options{instance_value}->{display} . "' "; 
+    }
+    return '';
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
+    bless $self, $class;
+    
+    $self->{version} = '1.0';
+    $options{options}->add_options(arguments => { 
+    });
+    
+    return $self;
+}
+
+my $mapping = {
+    genMemUtilizationPhyRam         => { oid => '.1.3.6.1.4.1.6889.2.1.11.1.2.6.1.2' }, # in Bytes
+    genMemUtilizationPercentUsed    => { oid => '.1.3.6.1.4.1.6889.2.1.11.1.2.6.1.3' },
+};
+
+sub manage_selection {
+    my ($self, %options) = @_;
+    
+    my $oid_genMemUtilizationEntry = '.1.3.6.1.4.1.6889.2.1.11.1.2.6.1';
+    my $results = $options{snmp}->get_table(oid => $oid_genMemUtilizationEntry, nothing_quit => 1);
+    $self->{memory} = {};
+    foreach my $oid (keys %{$results}) {
+        next if ($oid !~ /^$mapping->{genMemUtilizationPercentUsed}->{oid}\.(.*)/);
+        my $instance = $1;
+        my $result = $options{snmp}->map_instance(mapping => $mapping, results => $results, instance => $instance);
+        
+        my $total = $result->{genMemUtilizationPhyRam};
+        my $used = sprintf('%d', $total * $result->{genMemUtilizationPercentUsed} / 100);
+        $self->{memory}->{$instance} = {
+            display => $instance,
+            used => $used,
+            total => $total
+        };
+    }
+    
+    if (scalar(keys %{$self->{memory}}) <= 0) {
+        $self->{output}->add_option_msg(short_msg => "No entry found.");
+        $self->{output}->option_exit();
+    }
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check memory usages.
+
+=over 8
+
+=item B<--warning-usage>
+
+Threshold warning (in percent).
+
+=item B<--critical-usage>
+
+Threshold critical (in percent).
+
+=back
+
+=cut
diff --git a/hardware/telephony/avaya/mediagateway/snmp/mode/components/alarm.pm b/hardware/telephony/avaya/mediagateway/snmp/mode/components/alarm.pm
new file mode 100644
index 000000000..2423529f8
--- /dev/null
+++ b/hardware/telephony/avaya/mediagateway/snmp/mode/components/alarm.pm
@@ -0,0 +1,88 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package hardware::telephony::avaya::mediagateway::snmp::mode::components::alarm;
+
+use strict;
+use warnings;
+
+sub load {}
+
+my $bits_alarm = {
+    0 => 'at least two fans have been operating at less than 90% of their nominal speed for 5 minutes or more',
+    1 => 'the power supply fan has been operating at less than 90% of its nominal speed for 10 minutes or more, but less than 15 minutes',
+    2 => 'the power supply fan has been operating at less than 90% of its nominal speed for 15 minutes or more',
+    4 => 'cmgCpuTemp has exceeded its warning threshold',
+    5 => 'mgDspTemp has exceeded its warning threshold',
+    7 => 'Power On Status Test failure -NCE, QUICC test failures on power up',
+    8 => 'The +5.1 v power supply to the MG processor is out of range',
+    9 => 'The +3.3 v power supply to the VoIP complexes is out of range',
+    10 => 'The +3.3 v power supply to the VoIP complexes is out of range',
+    11 => 'The +1.58 v power supply to the DSP units is out of range',
+    12 => 'The +2.5 v power supply to the 8260 processor is out of range',
+    13 => 'The -48 v auxiliary power supply to the endpoints is out of range',
+    14 => 'The +12 v power supply to the fans is out of range',
+    16 => 'Clock synchronization signal is lost',
+    17 => 'Clock synchronization signal warning. Only one clock syncronization signal source remains',
+    18 => 'Clock synchronization signal excessive switching',
+    19 => 'TDM Test Expansion Box 1 Failure',
+    20 => 'TDM Test Expansion Box 2 Failure',
+    21 => 'PoE Power Supply Base Box Failure',
+    22 => 'PoE Power Supply Expansion Box 1 Failure',
+    23 => 'PoE Power Supply Expansion Box 2 Failure',
+};
+
+sub check {
+    my ($self) = @_;
+    
+    $self->{output}->output_add(long_msg => "Checking alarms");
+    $self->{components}->{alarm} = { name => 'alarms', total => 0, skip => 0 };
+    return if ($self->check_filter(section => 'alarm'));
+
+    my $oid_cmgHardwareFaultMask = '.1.3.6.1.4.1.6889.2.9.1.1.10.12.0';
+    return if (!defined($self->{results}->{$oid_cmgHardwareFaultMask}));
+
+    $self->{results}->{$oid_cmgHardwareFaultMask} = oct("0b" . unpack('b*', $self->{results}->{$oid_cmgHardwareFaultMask}));
+    foreach (sort { $a <=> $b }  keys %$bits_alarm) {
+        my $instance = $_;
+        my $status = 'disabled';
+        if (($self->{results}->{$oid_cmgHardwareFaultMask} & (1 << $_))) {
+            $status = 'enabled';
+        }
+
+        next if ($self->check_filter(section => 'alarm', instance => $instance));
+        $self->{components}->{alarm}->{total}++;
+
+        $self->{output}->output_add(
+            long_msg => sprintf(
+                "alarm '%s' status is '%s' [instance: %s]",
+                $bits_alarm->{$_}, $status, $instance
+            )
+        );
+        my $exit = $self->get_severity(section => 'alarm', instance => $instance, value => $status);
+        if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+            $self->{output}->output_add(severity =>  $exit,
+                                        short_msg => sprintf("Alarm '%s' status is '%s'",
+                                                             $bits_alarm->{$_}, $status));
+        }
+    }
+}
+
+1;
diff --git a/hardware/telephony/avaya/mediagateway/snmp/mode/controllerstatus.pm b/hardware/telephony/avaya/mediagateway/snmp/mode/controllerstatus.pm
new file mode 100644
index 000000000..46f1c9fe5
--- /dev/null
+++ b/hardware/telephony/avaya/mediagateway/snmp/mode/controllerstatus.pm
@@ -0,0 +1,139 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package hardware::telephony::avaya::mediagateway::snmp::mode::controllerstatus;
+
+use base qw(centreon::plugins::templates::counter);
+
+use strict;
+use warnings;
+use centreon::plugins::templates::catalog_functions;
+
+sub custom_status_output {
+    my ($self, %options) = @_;
+    
+    my $msg = sprintf("controller registration state is '%s' [h248 link status: '%s']", $self->{result_values}->{registration_state}, $self->{result_values}->{h248_link_status});
+    return $msg;
+}
+
+sub custom_status_calc {
+    my ($self, %options) = @_;
+    
+    $self->{result_values}->{registration_state} = $options{new_datas}->{$self->{instance} . '_cmgRegistrationState'};
+    $self->{result_values}->{h248_link_status} = $options{new_datas}->{$self->{instance} . '_cmgH248LinkStatus'};
+    return 0;
+}
+
+sub set_counters {
+    my ($self, %options) = @_;
+    
+    $self->{maps_counters_type} = [
+        { name => 'global', type => 0 },
+    ];
+        
+    $self->{maps_counters}->{global} = [
+         { label => 'status', threshold => 0, set => {
+                key_values => [ { name => 'cmgRegistrationState' }, { name => 'cmgH248LinkStatus' } ],
+                closure_custom_calc => $self->can('custom_status_calc'),
+                closure_custom_output => $self->can('custom_status_output'),
+                closure_custom_perfdata => sub { return 0; },
+                closure_custom_threshold_check => \&centreon::plugins::templates::catalog_functions::catalog_status_threshold,
+            }
+        },
+    ];
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
+    bless $self, $class;
+    
+    $self->{version} = '1.0';
+    $options{options}->add_options(arguments => {
+        "unknown-status:s"        => { name => 'unknown_status', default => '' },
+        "warning-status:s"        => { name => 'warning_status', default => '' },
+        "critical-status:s"       => { name => 'critical_status', default => '%{h248_link_status} =~ /down/i || %{registration_state} =~ /notRegistred/i' },
+    });
+
+    return $self;
+}
+
+sub check_options {
+    my ($self, %options) = @_;
+    $self->SUPER::check_options(%options);
+
+    $self->change_macros(macros => ['warning_status', 'critical_status', 'unknown_status']);
+}
+
+my %map_registration_state = (
+    1 => 'registred',
+    2 => 'notRegistred',
+);
+my %map_h248_link_status = (
+    1 => 'up',
+    2 => 'down',
+);
+
+my $mapping = {
+    cmgRegistrationState    => { oid => '.1.3.6.1.4.1.6889.2.9.1.3.1', map => \%map_registration_state },
+    cmgH248LinkStatus       => { oid => '.1.3.6.1.4.1.6889.2.9.1.3.3', map => \%map_h248_link_status },
+};
+
+sub manage_selection {
+    my ($self, %options) = @_;
+
+    
+    my $snmp_result = $options{snmp}->get_leef(
+        oids => [$mapping->{cmgRegistrationState}->{oid}, $mapping->{cmgH248LinkStatus}->{oid}],
+        nothing_quit => 1
+    );
+
+    my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => '0');
+    $self->{global} = { %$result };
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check controller status.
+
+=over 8
+
+=item B<--unknown-status>
+
+Set warning threshold for status (Default: '%{status} =~ /unknown/i').
+Can used special variables like: %{h248_link_status}, %{registration_state}
+
+=item B<--warning-status>
+
+Set warning threshold for status (Default: '%{status} =~ /batteryLow/i').
+Can used special variables like: %{h248_link_status}, %{registration_state}
+
+=item B<--critical-status>
+
+Set critical threshold for status (Default: '%{h248_link_status} =~ /down/i || %{registration_state} =~ /notRegistred/i').
+Can used special variables like: %{h248_link_status}, %{registration_state}
+
+=back
+
+=cut
diff --git a/hardware/telephony/avaya/mediagateway/snmp/mode/hardware.pm b/hardware/telephony/avaya/mediagateway/snmp/mode/hardware.pm
new file mode 100644
index 000000000..e6611155a
--- /dev/null
+++ b/hardware/telephony/avaya/mediagateway/snmp/mode/hardware.pm
@@ -0,0 +1,98 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package hardware::telephony::avaya::mediagateway::snmp::mode::hardware;
+
+use base qw(centreon::plugins::templates::hardware);
+
+use strict;
+use warnings;
+
+sub set_system {
+    my ($self, %options) = @_;
+    
+    $self->{regexp_threshold_overload_check_section_option} = '^(alarm)$';
+    
+    $self->{cb_hook2} = 'snmp_execute';
+    
+    $self->{thresholds} = {
+        alarm => [
+            ['enabled', 'CRITICAL'],
+            ['disabled', 'OK'],
+        ],
+    };
+    
+    $self->{components_path} = 'hardware::telephony::avaya::mediagateway::snmp::mode::components';
+    $self->{components_module} = ['alarm'];
+}
+
+sub snmp_execute {
+    my ($self, %options) = @_;
+    
+    my $oid_cmgHardwareFaultMask = '.1.3.6.1.4.1.6889.2.9.1.1.10.12.0';
+    $self->{results} = $options{snmp}->get_leef(oids => [$oid_cmgHardwareFaultMask]);
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, no_absent => 1, no_performance => 1);
+    bless $self, $class;
+    
+    $self->{version} = '1.0';
+    $options{options}->add_options(arguments => { 
+    });
+    
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check hardware.
+
+=over 8
+
+=item B<--component>
+
+Which component to check (Default: '.*').
+Can be: 'alarm'.
+
+=item B<--filter>
+
+Exclude some parts (comma seperated list) (Example: --filter=alarm)
+Can also exclude specific instance: --filter=alarm,1
+
+=item B<--no-component>
+
+Return an error if no compenents are checked.
+If total (with skipped) is 0. (Default: 'critical' returns).
+
+=item B<--threshold-overload>
+
+Set to overload default threshold values (syntax: section,[instance,]status,regexp)
+It used before default thresholds (order stays).
+Example: --threshold-overload='alarm,1,OK,enabled'
+
+=back
+
+=cut
diff --git a/hardware/telephony/avaya/mediagateway/snmp/plugin.pm b/hardware/telephony/avaya/mediagateway/snmp/plugin.pm
new file mode 100644
index 000000000..76efdfd5b
--- /dev/null
+++ b/hardware/telephony/avaya/mediagateway/snmp/plugin.pm
@@ -0,0 +1,51 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package hardware::telephony::avaya::mediagateway::snmp::plugin;
+
+use strict;
+use warnings;
+use base qw(centreon::plugins::script_snmp);
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
+    bless $self, $class;
+
+    $self->{version} = '1.0';
+    %{$self->{modes}} = (
+        'controller-status' => 'hardware::telephony::avaya::mediagateway::snmp::mode::controllerstatus',
+        'cpu'               => 'centreon::common::avaya::snmp::mode::cpu',
+        'hardware'          => 'hardware::telephony::avaya::mediagateway::snmp::mode::hardware',
+        'memory'            => 'centreon::common::avaya::snmp::mode::memory',
+    );
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 PLUGIN DESCRIPTION
+
+Check avaya mediagateway equipment in SNMP.
+
+=cut