diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/components/fan.pm b/centreon-plugins/network/microsens/g6/snmp/mode/components/fan.pm
new file mode 100644
index 000000000..c4efad11a
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/components/fan.pm
@@ -0,0 +1,57 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::components::fan;
+
+use strict;
+use warnings;
+
+sub load {}
+
+sub check {
+    my ($self) = @_;
+
+    $self->{output}->output_add(long_msg => 'checking fans');
+    $self->{components}->{fan} = { name => 'fans', total => 0, skip => 0 };
+    return if ($self->check_filter(section => 'fan'));
+
+    return if (!defined($self->{results}->{fan_status}) || $self->check_filter(section => 'fan', instance => 1));
+
+    $self->{output}->output_add(
+        long_msg => sprintf(
+            "fan '1' status is %s",
+            $self->{results}->{fan_status}
+        )
+    );
+    $self->{components}->{fan}->{total}++;
+
+    my $exit = $self->get_severity(section => 'fan', instance => 1, value => $self->{results}->{fan_status});
+    if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+        $self->{output}->output_add(
+            severity =>  $exit,
+            short_msg => sprintf(
+                "fan '1' status is %s",
+                $self->{results}->{fan_status}
+            )
+        );
+    }
+}
+
+1;
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/components/psu.pm b/centreon-plugins/network/microsens/g6/snmp/mode/components/psu.pm
new file mode 100644
index 000000000..2f49ad39e
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/components/psu.pm
@@ -0,0 +1,76 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::components::psu;
+
+use strict;
+use warnings;
+
+sub load {}
+
+sub check_psu {
+    my ($self, %options) = @_;
+
+    $self->{output}->output_add(
+        long_msg => sprintf(
+            "power supply '%s' status is %s",
+            $options{name},
+            $options{value}
+        )
+    );
+    $self->{components}->{psu}->{total}++;
+
+    my $exit = $self->get_severity(section => 'psu', instance => $options{name}, value => $options{value});
+    if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+        $self->{output}->output_add(
+            severity =>  $exit,
+            short_msg => sprintf(
+                "power supply '1' status is %s",
+                $options{name},
+                $options{value}
+            )
+        );
+    }
+}
+
+sub check {
+    my ($self) = @_;
+
+    $self->{output}->output_add(long_msg => 'checking power supplies');
+    $self->{components}->{psu} = { name => 'psu', total => 0, skip => 0 };
+    return if ($self->check_filter(section => 'psu'));
+
+    if (defined($self->{results}->{psu1_status}) && !$self->check_filter(section => 'psu', instance => 1)) {
+        check_psu(
+            $self,
+            value => $self->{results}->{psu1_status},
+            name => 1
+        );
+    }
+    if (defined($self->{results}->{psu2_status}) && !$self->check_filter(section => 'psu', instance => 2)) {
+        check_psu(
+            $self,
+            value => $self->{results}->{psu2_status},
+            name => 2
+        );
+    }
+}
+
+1;
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/components/sdcard.pm b/centreon-plugins/network/microsens/g6/snmp/mode/components/sdcard.pm
new file mode 100644
index 000000000..9fd69fc62
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/components/sdcard.pm
@@ -0,0 +1,57 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::components::sdcard;
+
+use strict;
+use warnings;
+
+sub load {}
+
+sub check {
+    my ($self) = @_;
+
+    $self->{output}->output_add(long_msg => 'checking sd cards');
+    $self->{components}->{sdcard} = { name => 'sdcard', total => 0, skip => 0 };
+    return if ($self->check_filter(section => 'sdcard'));
+
+    return if (!defined($self->{results}->{sdcard_status}) || $self->check_filter(section => 'sdcard', instance => 1));
+
+    $self->{output}->output_add(
+        long_msg => sprintf(
+            "sd card '1' status is %s",
+            $self->{results}->{sdcard_status}
+        )
+    );
+    $self->{components}->{sdcard}->{total}++;
+
+    my $exit = $self->get_severity(section => 'sdcard', instance => 1, value => $self->{results}->{sdcard_status});
+    if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+        $self->{output}->output_add(
+            severity =>  $exit,
+            short_msg => sprintf(
+                "sd card '1' status is %s",
+                $self->{results}->{sdcard_status}
+            )
+        );
+    }
+}
+
+1;
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/components/temperature.pm b/centreon-plugins/network/microsens/g6/snmp/mode/components/temperature.pm
new file mode 100644
index 000000000..db0ccde02
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/components/temperature.pm
@@ -0,0 +1,65 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::components::temperature;
+
+use strict;
+use warnings;
+
+sub load {}
+
+sub check {
+    my ($self) = @_;
+
+    $self->{output}->output_add(long_msg => 'checking temperatures');
+    $self->{components}->{temperature} = { name => 'temperature', total => 0, skip => 0 };
+    return if ($self->check_filter(section => 'temperature'));
+
+    return if (!defined($self->{results}->{system_temp}) || $self->check_filter(section => 'temperature', instance => 1));
+
+    $self->{output}->output_add(
+        long_msg => sprintf(
+            "temperature system is %s C",
+            $self->{results}->{system_temp}
+        )
+    );
+    $self->{components}->{temperature}->{total}++;
+
+    my ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'temperature', instance => 'system', value => $self->{results}->{system_temp});            
+    if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+        $self->{output}->output_add(
+            severity => $exit,
+            short_msg => sprintf(
+                "temperature system is '%s' C", $self->{results}->{system_temp}
+            )
+        );
+    }
+    $self->{output}->perfdata_add(
+        nlabel => 'hardware.temperature.celsius',
+        unit => 'C',
+        instances => 'system',
+        value => $self->{results}->{system_temp},
+        warning => $warn,
+        critical => $crit,
+        min => 0
+    );
+}
+
+1;
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/cpudetailed.pm b/centreon-plugins/network/microsens/g6/snmp/mode/cpudetailed.pm
new file mode 100644
index 000000000..55abfb29f
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/cpudetailed.pm
@@ -0,0 +1,59 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::cpudetailed;
+
+use base qw(snmp_standard::mode::cpudetailed);
+
+use strict;
+use warnings;
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check system CPUs (UCD-SNMP-MIB) (User, Nice, System, Idle, Wait, Kernel, Interrupt, SoftIRQ, Steal, Guest, GuestNice)
+An average of all CPUs.
+
+=over 8
+
+=item B<--warning-*>
+
+Threshold warning in percent.
+Can be: 'user', 'nice', 'system', 'idle', 'wait', 'kernel', 'interrupt', 'softirq', 'steal', 'guest', 'guestnice'.
+
+=item B<--critical-*>
+
+Threshold critical in percent.
+Can be: 'user', 'nice', 'system', 'idle', 'wait', 'kernel', 'interrupt', 'softirq', 'steal', 'guest', 'guestnice'.
+
+=back
+
+=cut
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/hardware.pm b/centreon-plugins/network/microsens/g6/snmp/mode/hardware.pm
new file mode 100644
index 000000000..e85a50595
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/hardware.pm
@@ -0,0 +1,144 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::hardware;
+
+use base qw(centreon::plugins::templates::hardware);
+
+use strict;
+use warnings;
+
+sub set_system {
+    my ($self, %options) = @_;
+
+    $self->{regexp_threshold_numeric_check_section_option} = '^(?:temperature)$';
+    
+    $self->{cb_hook2} = 'snmp_execute';
+    
+    $self->{thresholds} = {
+        fan => [
+            ['ok', 'OK'],
+            ['unused', 'OK'],
+            ['degraded', 'WARNING'],
+            ['fail', 'CRITICAL'],
+            ['missing', 'OK']
+        ],
+        psu => [
+            ['ok', 'OK'],
+            ['overload', 'WARNING'],
+            ['inputLow', 'OK'],
+            ['fuseFail', 'CRITICAL'],
+            ['notApplicable', 'OK'],
+            ['unmanaged', 'OK'],
+            ['notInstalled', 'OK'],
+        ],
+        sdcard => [
+            ['empty', 'OK'],
+            ['inserted', 'OK'],
+            ['writeProtected', 'OK'],
+            ['writing', 'OK']
+        ]
+    };
+    
+    $self->{components_path} = 'network::microsens::g6::snmp::mode::components';
+    $self->{components_module} = ['fan', 'psu', 'sdcard', 'temperature'];
+}
+
+sub snmp_execute {
+    my ($self, %options) = @_;
+
+    my $map_psu_status = {
+        0 => 'ok', 1 => 'overload', 2 => 'inputLow',
+        3 => 'fuseFail', 4 => 'notApplicable',
+        5 => 'unmanaged', 6 => 'notInstalled'
+    };
+    my $map_fan_status = {
+        0 => 'unused', 1 => 'ok', 2 => 'degraded',
+        3 => 'fail', 4 => 'missing'
+    };
+    my $map_sdcard_status = {
+        0 => 'empty', 1 => 'inserted', 2 => 'writeProtected', 3 => 'writing'
+    };
+    my $mapping = {
+        system_temp   => { oid => '.1.3.6.1.4.1.3181.10.6.1.30.104' }, # systemTemperature
+        psu1_status   => { oid => '.1.3.6.1.4.1.3181.10.6.1.31.100', map => $map_psu_status }, # hardwarePowerSupply1Status
+        psu2_status   => { oid => '.1.3.6.1.4.1.3181.10.6.1.31.101', map => $map_psu_status }, # hardwarePowerSupply2Status
+        fan_status    => { oid => '.1.3.6.1.4.1.3181.10.6.1.31.103', map => $map_fan_status }, # hardwareFanStatus
+        sdcard_status => { oid => '.1.3.6.1.4.1.3181.10.6.1.31.104', map => $map_sdcard_status }  # hardwareSdCardStatus
+    };
+
+    my $snmp_result = $options{snmp}->get_leef(oids => [ map($_->{oid} . '.0', values(%$mapping)) ]);
+    $self->{results} = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => 0);
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, no_absent => 1, force_new_perfdata => 1);
+    bless $self, $class;
+
+    $options{options}->add_options(arguments => {});
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check hardware.
+
+=over 8
+
+=item B<--component>
+
+Which component to check (Default: '.*').
+Can be: 'fan', 'psu', 'sdcard', 'temperature'.
+
+=item B<--filter>
+
+Exclude some parts (comma seperated list) (Example: --filter=fan)
+Can also exclude specific instance: --filter=psu,2
+
+=item B<--no-component>
+
+Return an error if no compenents are checked.
+If total (with skipped) is 0. (Default: 'critical' returns).
+
+=item B<--threshold-overload>
+
+Set to overload default threshold values (syntax: section,[instance,]status,regexp)
+It used before default thresholds (order stays).
+Example: --threshold-overload='sdcard,WARNING,empty'
+
+=item B<--warning>
+
+Set warning threshold for 'temperature' (syntax: type,regexp,threshold)
+Example: --warning='temperature,.*,40'
+
+=item B<--critical>
+
+Set critical threshold for 'temperature' (syntax: type,regexp,threshold)
+Example: --critical='temperature,.*,50'
+
+=back
+
+=cut
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/interfaces.pm b/centreon-plugins/network/microsens/g6/snmp/mode/interfaces.pm
new file mode 100644
index 000000000..260743e4b
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/interfaces.pm
@@ -0,0 +1,178 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::interfaces;
+
+use base qw(snmp_standard::mode::interfaces);
+
+use strict;
+use warnings;
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check interfaces.
+
+=over 8
+
+=item B<--add-global>
+
+Check global port statistics (By default if no --add-* option is set).
+
+=item B<--add-status>
+
+Check interface status.
+
+=item B<--add-duplex-status>
+
+Check duplex status (with --warning-status and --critical-status).
+
+=item B<--add-traffic>
+
+Check interface traffic.
+
+=item B<--add-errors>
+
+Check interface errors.
+
+=item B<--add-cast>
+
+Check interface cast.
+
+=item B<--add-speed>
+
+Check interface speed.
+
+=item B<--add-volume>
+
+Check interface data volume between two checks (not supposed to be graphed, useful for BI reporting).
+
+=item B<--warning-status>
+
+Set warning threshold for status.
+Can used special variables like: %{admstatus}, %{opstatus}, %{duplexstatus}, %{display}
+
+=item B<--critical-status>
+
+Set critical threshold for status (Default: '%{admstatus} eq "up" and %{opstatus} ne "up"').
+Can used special variables like: %{admstatus}, %{opstatus}, %{duplexstatus}, %{display}
+
+=item B<--warning-*> B<--critical-*>
+
+Thresholds.
+Can be: 'total-port', 'total-admin-up', 'total-admin-down', 'total-oper-up', 'total-oper-down',
+'in-traffic', 'out-traffic', 'in-error', 'in-discard', 'out-error', 'out-discard',
+'in-ucast', 'in-bcast', 'in-mcast', 'out-ucast', 'out-bcast', 'out-mcast',
+'speed' (b/s).
+
+=item B<--units-traffic>
+
+Units of thresholds for the traffic (Default: 'percent_delta') ('percent_delta', 'bps', 'counter').
+
+=item B<--units-errors>
+
+Units of thresholds for errors/discards (Default: 'percent_delta') ('percent_delta', 'percent', 'delta', 'counter').
+
+=item B<--units-cast>
+
+Units of thresholds for communication types (Default: 'percent_delta') ('percent_delta', 'percent', 'delta', 'counter').
+
+=item B<--nagvis-perfdata>
+
+Display traffic perfdata to be compatible with nagvis widget.
+
+=item B<--interface>
+
+Set the interface (number expected) ex: 1,2,... (empty means 'check all interface').
+
+=item B<--name>
+
+Allows to use interface name with option --interface instead of interface oid index (Can be a regexp)
+
+=item B<--speed>
+
+Set interface speed for incoming/outgoing traffic (in Mb).
+
+=item B<--speed-in>
+
+Set interface speed for incoming traffic (in Mb).
+
+=item B<--speed-out>
+
+Set interface speed for outgoing traffic (in Mb).
+
+=item B<--map-speed-dsl>
+
+Get interface speed configuration for interface type 'adsl' and 'vdsl2'.
+
+Syntax: --map-speed-dsl=interface-src-name,interface-dsl-name
+
+E.g: --map-speed-dsl=Et0.835,Et0-vdsl2
+
+=item B<--force-counters64>
+
+Force to use 64 bits counters only. Can be used to improve performance.
+
+=item B<--force-counters32>
+
+Force to use 32 bits counters (even in snmp v2c and v3). Should be used when 64 bits counters are buggy.
+
+=item B<--reload-cache-time>
+
+Time in minutes before reloading cache file (default: 180).
+
+=item B<--oid-filter>
+
+Choose OID used to filter interface (default: ifName) (values: ifDesc, ifAlias, ifName, IpAddr).
+
+=item B<--oid-display>
+
+Choose OID used to display interface (default: ifName) (values: ifDesc, ifAlias, ifName, IpAddr).
+
+=item B<--oid-extra-display>
+
+Add an OID to display.
+
+=item B<--display-transform-src>
+
+Regexp src to transform display value.
+
+=item B<--display-transform-dst>
+
+Regexp dst to transform display value.
+
+=item B<--show-cache>
+
+Display cache interface datas.
+
+=back
+
+=cut
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/listsfp.pm b/centreon-plugins/network/microsens/g6/snmp/mode/listsfp.pm
new file mode 100644
index 000000000..7460c0edb
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/listsfp.pm
@@ -0,0 +1,134 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::listsfp;
+
+use base qw(centreon::plugins::mode);
+
+use strict;
+use warnings;
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
+    bless $self, $class;
+
+    $options{options}->add_options(arguments => {});
+
+    return $self;
+}
+
+sub check_options {
+    my ($self, %options) = @_;
+    $self->SUPER::init(%options);
+}
+
+my $map_status = {
+    0 => 'ok', 1 => 'laserDisabled', 2 => 'lossOfSignal',
+    3 => 'txFailure', 4 => 'readError'
+};
+my $map_type = {
+    0 => 'empty', 1 => 'unknown', 2 => 'sfp',
+    3 => 'gbic', 4 => 'sff', 5 => 'dwdmSfp',
+    7 => 'xfp', 8 => 'csfpA', 9 => 'csfpB',
+    10 => 'dwdmXfp', 11 => 'sfpPlus'
+};
+my $mapping = {
+    port     => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.2' }, # informationPort
+    location => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.3' }, # informationLocation
+    status   => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.4', map => $map_status }, # informationLocation
+    type     => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.5', map => $map_type } # informationLocation
+};
+my $oid_sfp_entry = '.1.3.6.1.4.1.3181.10.6.1.34.100.1'; # informationEntry
+
+sub manage_selection {
+    my ($self, %options) = @_;
+
+    my $snmp_result = $options{snmp}->get_table(
+        oid => $oid_sfp_entry,
+        start => $mapping->{port}->{oid},
+        end => $mapping->{type}->{oid}
+    );
+
+    my $ports = {};
+    foreach my $oid (keys %$snmp_result) {
+        next if ($oid !~ /^$mapping->{port}->{oid}\.(.*)$/);
+        my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => $1);
+        $ports->{$1} = $result;
+    }
+
+    return $ports;
+}
+
+sub run {
+    my ($self, %options) = @_;
+  
+    my $ports = $self->manage_selection(%options);
+    foreach (sort keys %$ports) {
+        $self->{output}->output_add(
+            long_msg => sprintf(
+                '[port: %s] [location: %s] [status: %s] [type: %s]',
+                $ports->{$_}->{port},
+                $ports->{$_}->{location},
+                $ports->{$_}->{status},
+                $ports->{$_}->{type}
+            )
+        );
+    }
+
+    $self->{output}->output_add(
+        severity => 'OK',
+        short_msg => 'List sfp ports:'
+    );
+    $self->{output}->display(nolabel => 1, force_ignore_perfdata => 1, force_long_output => 1);
+    $self->{output}->exit();
+}
+
+sub disco_format {
+    my ($self, %options) = @_;
+
+    $self->{output}->add_disco_format(elements => [keys %$mapping]);
+}
+
+sub disco_show {
+    my ($self, %options) = @_;
+
+    my $ports = $self->manage_selection(%options);
+    foreach (sort keys %$ports) { 
+        $self->{output}->add_disco_entry(
+            %{$ports->{$_}}
+        );
+    }
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+List sfp ports.
+
+=over 8
+
+=back
+
+=cut
+    
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/load.pm b/centreon-plugins/network/microsens/g6/snmp/mode/load.pm
new file mode 100644
index 000000000..557d1beb3
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/load.pm
@@ -0,0 +1,60 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::load;
+
+use base qw(snmp_standard::mode::loadaverage);
+
+use strict;
+use warnings;
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check system load-average.
+
+=over 8
+
+=item B<--warning>
+
+Threshold warning (1min,5min,15min).
+
+=item B<--critical>
+
+Threshold critical (1min,5min,15min).
+
+=item B<--average>
+
+Load average for the number of CPUs.
+
+=back
+
+=cut
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/memory.pm b/centreon-plugins/network/microsens/g6/snmp/mode/memory.pm
new file mode 100644
index 000000000..46d0f5c93
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/memory.pm
@@ -0,0 +1,67 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::memory;
+
+use base qw(snmp_standard::mode::memory);
+
+use strict;
+use warnings;
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check memory usage (UCD-SNMP-MIB).
+
+=over 8
+
+=item B<--units>
+
+Units of thresholds (Default: '%') ('%', 'absolute') (Deprecated. Please use new counters directly)
+
+=item B<--free>
+
+Thresholds are on free space left (Deprecated. Please use new counters directly)
+
+=item B<--swap>
+
+Check swap also.
+
+=item B<--warning-*> B<--critical-*>
+
+Thresholds.
+Can be: 'usage' (B), 'usage-free' (B), 'usage-prct' (%), 
+'swap' (B), 'swap-free' (B), 'swap-prct' (%),
+'buffer' (B), 'cached' (B), 'shared' (B).
+
+=back
+
+=cut
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/sfp.pm b/centreon-plugins/network/microsens/g6/snmp/mode/sfp.pm
new file mode 100644
index 000000000..a5d8ff0cf
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/sfp.pm
@@ -0,0 +1,215 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::sfp;
+
+use base qw(centreon::plugins::templates::counter);
+
+use strict;
+use warnings;
+use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold_ng);
+
+sub sfp_long_output {
+    my ($self, %options) = @_;
+
+    return sprintf(
+        "checking sfp port '%s'%s",
+        $options{instance},
+        $options{instance_value}->{location} ne '' ? ' [location: ' . $options{instance_value}->{location} . ']' : ''
+    );
+}
+
+sub prefix_sfp_output {
+    my ($self, %options) = @_;
+
+    return return sprintf(
+        "sfp port '%s'%s ",
+        $options{instance},
+        $options{instance_value}->{location} ne '' ? ' [location: ' . $options{instance_value}->{location} . ']' : ''
+    );
+}
+
+sub set_counters {
+    my ($self, %options) = @_;
+
+    $self->{maps_counters_type} = [
+        { name => 'sfp', type => 3, cb_prefix_output => 'prefix_sfp_output', cb_long_output => 'sfp_long_output', indent_long_output => '    ', message_multiple => 'All sfp ports are ok',
+            group => [
+                { name => 'status', type => 0, skipped_code => { -10 => 1 } },
+                { name => 'power', type => 0, skipped_code => { -10 => 1 } },
+                { name => 'temperature', type => 0, skipped_code => { -10 => 1 } }
+            ]
+        }
+    ];
+    
+    $self->{maps_counters}->{status} = [
+        { label => 'status', type => 2, critical_default => '%{status} =~ /txFailure|lossOfSignal|readError/', set => {
+                key_values => [ { name => 'status' }, { name => 'location' }, { name => 'port' } ],
+                output_template => 'status: %s',
+                closure_custom_perfdata => sub { return 0; },
+                closure_custom_threshold_check => \&catalog_status_threshold_ng
+            }
+        }
+    ];
+
+    $self->{maps_counters}->{power} = [
+        { label => 'input-power', nlabel => 'port.input.power.dbm', set => {
+                key_values => [ { name => 'input' } ],
+                output_template => 'input power: %s dBm',
+                perfdatas => [
+                    { template => '%s', unit => 'dBm', label_extra_instance => 1 }
+                ]
+            }
+        },
+        { label => 'output-power', nlabel => 'port.output.power.dbm', set => {
+                key_values => [ { name => 'output' } ],
+                output_template => 'output power: %s dBm',
+                perfdatas => [
+                    { template => '%s', unit => 'dBm', label_extra_instance => 1 }
+                ]
+            }
+        }
+    ];
+
+    $self->{maps_counters}->{temperature} = [
+        { label => 'temperature', nlabel => 'port.temperature.celsius', set => {
+                key_values => [ { name => 'temperature' } ],
+                output_template => 'temperature: %.2f C',
+                perfdatas => [
+                    { template => '%s', unit => 'C', label_extra_instance => 1 }
+                ]
+            }
+        }
+    ];
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+    
+    $options{options}->add_options(arguments => { 
+        'filter-port:s' => { name => 'filter_port' }
+    });
+
+    return $self;
+}
+
+my $map_status = {
+    0 => 'ok', 1 => 'laserDisabled', 2 => 'lossOfSignal',
+    3 => 'txFailure', 4 => 'readError'
+};
+my $mapping = {
+    location     => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.3' }, # informationLocation
+    status       => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.4', map => $map_status }, # informationStatus
+    output_power => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.18' }, # informationTxPower
+    input_power  => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.19' }, # informationRxPower
+    temperature  => { oid => '.1.3.6.1.4.1.3181.10.6.1.34.100.1.20' }  # informationTemperature
+};
+
+sub manage_selection {
+    my ($self, %options) = @_;
+
+    my $oid_port = '.1.3.6.1.4.1.3181.10.6.1.34.100.1.2'; # informationPort
+    my $snmp_result = $options{snmp}->get_table(
+        oid => $oid_port,
+        nothing_quit => 1
+    );
+
+    $self->{sfp} = {};
+    foreach my $oid (keys %$snmp_result) {
+        $oid =~ /^$oid_port\.(.*)$/;
+        my $instance = $1;
+
+        my $port = $snmp_result->{$oid};
+        next if ($port == 0);
+
+        if (defined($self->{option_results}->{filter_port}) && $self->{option_results}->{filter_port} ne '' &&
+            $port !~ /$self->{option_results}->{filter_port}/) {
+            $self->{output}->output_add(long_msg => "skipping '" . $port . "': no matching filter.", debug => 1);
+            next;
+        }
+        
+        $self->{sfp}->{$port} = {
+            instance => $instance,
+            status => { port => $port },
+            power => {},
+            temperature => {}
+        };
+    }
+
+    if (scalar(keys %{$self->{sfp}}) <= 0) {
+        $self->{output}->add_option_msg(short_msg => 'No sfp port found.');
+        $self->{output}->option_exit();
+    }
+
+    $options{snmp}->load(
+        oids => [
+            map($_->{oid}, values(%$mapping))
+        ],
+        instances => [ map($_->{instance}, values(%{$self->{sfp}})) ],
+        instance_regexp => '^(.*)$'
+    );
+    $snmp_result = $options{snmp}->get_leef(nothing_quit => 1);
+
+    foreach (keys %{$self->{sfp}}) {
+        my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => $self->{sfp}->{$_}->{instance});
+        $self->{sfp}->{$_}->{status}->{status} = $result->{status};
+        $self->{sfp}->{$_}->{location} = $result->{location};
+        $self->{sfp}->{$_}->{status}->{location} = $result->{location};
+
+        $self->{sfp}->{$_}->{power}->{output} = $1 if ($result->{output_power} =~ /([0-9\.]+)/);
+        $self->{sfp}->{$_}->{power}->{input} = $1 if ($result->{input_power} =~ /([0-9\.]+)/);
+        $self->{sfp}->{$_}->{temperature}->{temperature} = $1 if ($result->{temperature} =~ /([0-9\.]+)\s*C/);     
+    }
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check sfp ports.
+
+=over 8
+
+=item B<--filter-port>
+
+Filter ports by index (can be a regexp).
+
+=item B<--warning-status>
+
+Set warning threshold for status.
+Can used special variables like: %{status}, %{name}, %{location}
+
+=item B<--critical-status>
+
+Set critical threshold for status (Default: '%{status} =~ /txFailure|lossOfSignal|readError/').
+Can used special variables like: %{status}, %{port}, %{location}
+
+=item B<--warning-*> B<--critical-*>
+
+Thresholds.
+Can be: 'temperature', 'input-power', 'output-power'.
+
+=back
+
+=cut
diff --git a/centreon-plugins/network/microsens/g6/snmp/mode/uptime.pm b/centreon-plugins/network/microsens/g6/snmp/mode/uptime.pm
new file mode 100644
index 000000000..79e4d3f18
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/mode/uptime.pm
@@ -0,0 +1,77 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::mode::uptime;
+
+use base qw(snmp_standard::mode::uptime);
+
+use strict;
+use warnings;
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check system uptime.
+
+=over 8
+
+=item B<--warning-uptime>
+
+Threshold warning.
+
+=item B<--critical-uptime>
+
+Threshold critical.
+
+=item B<--add-sysdesc>
+
+Display system description.
+
+=item B<--force-oid>
+
+Can choose your oid (numeric format only).
+
+=item B<--check-overload>
+
+Uptime counter limit is 4294967296 and overflow.
+With that option, we manage the counter going back. But there is a few chance we can miss a reboot.
+
+=item B<--reboot-window>
+
+To be used with check-overload option. Time in milliseconds (Default: 5000)
+You increase the chance of not missing a reboot if you decrease that value.
+
+=item B<--unit>
+
+Select the unit for performance data and thresholds. May be 's' for seconds, 'm' for minutes,
+'h' for hours, 'd' for days, 'w' for weeks.  Default is seconds
+
+=back
diff --git a/centreon-plugins/network/microsens/g6/snmp/plugin.pm b/centreon-plugins/network/microsens/g6/snmp/plugin.pm
new file mode 100644
index 000000000..9ddf82f3b
--- /dev/null
+++ b/centreon-plugins/network/microsens/g6/snmp/plugin.pm
@@ -0,0 +1,55 @@
+#
+# Copyright 2021 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package network::microsens::g6::snmp::plugin;
+
+use strict;
+use warnings;
+use base qw(centreon::plugins::script_snmp);
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
+    bless $self, $class;
+
+    $self->{modes} = {
+        'cpu-detailed'    => 'network::microsens::g6::snmp::mode::cpudetailed',
+        'hardware'        => 'network::microsens::g6::snmp::mode::hardware',
+        'interfaces'      => 'network::microsens::g6::snmp::mode::interfaces',
+        'list-interfaces' => 'snmp_standard::mode::listinterfaces',
+        'list-sfp'        => 'network::microsens::g6::snmp::mode::listsfp',
+        'load'            => 'network::microsens::g6::snmp::mode::load',
+        'memory'          => 'network::microsens::g6::snmp::mode::memory',
+        'sfp'             => 'network::microsens::g6::snmp::mode::sfp',
+        'uptime'          => 'network::microsens::g6::snmp::mode::uptime'
+    };
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 PLUGIN DESCRIPTION
+
+Check Microsens Generation 6 Ethernet Switches in SNMP.
+
+=cut