diff --git a/connectors/vmware/doc/en/installation/index.rst b/connectors/vmware/doc/en/installation/index.rst
index 237e5bc5c..6a96e651e 100644
--- a/connectors/vmware/doc/en/installation/index.rst
+++ b/connectors/vmware/doc/en/installation/index.rst
@@ -35,6 +35,118 @@ Hardware prerequisites will depend of check numbers. Minimal used resources are
 * RAM : 512 Mo (May slightly increase with the number of checks).
 * CPU : same as poller server.
 
+Centreon-vmware Installation - Debian Wheezy
+============================================
+
+SDK Perl VMWare Installation
+````````````````````````````
+
+The "centreon-vmware" connector uses SDK Perl VMWare for its operation. So we install it with VMWare recommandation (only tested with version below).
+
+========================== ===================== ======================
+Dependency                  Version               Repository
+========================== ===================== ======================
+libwww-perl                   6.04                wheezy
+libxml-libxml-perl            2.0001              wheezy
+libclass-methodmaker-perl     2.18                wheezy
+libcrypt-ssleay-perl          0.58                wheezy
+libsoap-lite-perl             0.714               wheezy
+libuuid-perl                  0.02                wheezy
+========================== ===================== ======================
+
+Install following dependency:
+::
+
+  # aptitude install make libxml-libxml-perl libwww-perl libclass-methodmaker-perl libcrypt-ssleay-perl libsoap-lite-perl libuuid-perl
+  
+Download the Perl SDK VMWare and install it:
+::
+
+  # tar zxf VMware-vSphere-Perl-SDK-6.0.0-2503617.x86_64.tar.gz && cd vmware-vsphere-cli-distrib
+  # perl Makefile.PL
+  # make && make install
+
+Requirements
+`````````````
+
+Following prerequisites are mandatory for « centreon_vmware »:
+
+* « perl-centreon-base »:  module since Centreon 2.5
+* « centreon-plugins-base »: the client and some dependencies
+* « zeromq » and Perl binding
+
+Following prerequisites are optional for « centreon_vmware »:
+
+*  « libtimedate-perl »
+
+centreon-vmware Installation with source
+````````````````````````````````````````
+
+Install the following package:
+::
+
+  # aptitude install libtimedate-perl
+
+Add the following line in « /etc/apt/sources.list » file:
+::
+
+  deb http://http.debian.net/debian wheezy-backports main
+
+Install « zeromq » dependency:
+::
+
+  # aptitude install libzmq3-dev gcc
+  # wget https://cpan.metacpan.org/authors/id/D/DM/DMAKI/ZMQ-LibZMQ3-1.19.tar.gz
+  # tar zxf ZMQ-LibZMQ3-1.19.tar.gz && cd ZMQ-LibZMQ3-1.19
+  # perl Makefile.PL
+  # make && make install
+  # wget https://cpan.metacpan.org/authors/id/D/DM/DMAKI/ZMQ-Constants-1.04.tar.gz
+  # tar zxf ZMQ-Constants-1.04.tar.gz && cd ZMQ-Constants-1.04
+  # perl Makefile.PL
+  # make && make install
+
+Download « centreon-vmware » archive, then install:
+::
+  
+  # tar zxvf centreon-vmware-2.0.0.tar.gz
+  # cd centreon-vmware-2.0.0
+  # cp centreon_vmware.pl /usr/bin/
+  
+  # mkdir -p /etc/centreon
+  # cp contrib/config/centreon_vmware-conf.pm /etc/centreon/centreon_vmware.pm
+  # cp contrib/debian/centreon_vmware-init /etc/init.d/centreon_vmware
+  # cp contrib/debian/centreon_vmware-default /etc/default/centreon_vmware
+  # chmod 775 /etc/init.d/centreon_vmware /usr/bin/centreon_vmware.pl
+  
+  # mkdir -p /usr/share/perl5/centreon/vmware/ /usr/share/perl5/centreon/script/
+  # cp centreon/vmware/* /usr/share/perl5/centreon/vmware/
+  # cp centreon/script/centreon_vmware.pm /usr/share/perl5/centreon/script/
+
+Configure "centreon-vmware" daemon to start at boot:
+::
+  
+  # update-rc.d centreon_vmware defaults
+
+Install « perl-centreon-base » dependency:
+::
+
+  # git clone -b 2.6.x --single-branch https://github.com/centreon/centreon.git centreon
+  # cd centreon
+  # cp lib/perl/centreon/script.pm /usr/share/perl5/centreon/
+  # cp -R lib/perl/centreon/common /usr/share/perl5/centreon/
+  
+Install the client and dependency:
+::
+
+  # git clone http://git.centreon.com/centreon-plugins.git
+  # cd centreon-plugins
+  # cp -R centreon/plugins /usr/share/perl5/centreon/
+  # mkdir -p /usr/lib/nagios/plugins/centreon/plugins/
+  # cp centreon/plugins/* /usr/lib/nagios/plugins/centreon/plugins/
+  # mkdir -p /usr/lib/nagios/plugins/apps/vmware/
+  # cp -R apps/vmware/* /usr/lib/nagios/plugins/apps/vmware/
+  # cp centreon_plugins.pl /usr/lib/nagios/plugins/
+
 Centreon-vmware Installation - centos/rhel 5 systems
 ====================================================
 
@@ -55,7 +167,8 @@ perl-UUID                    0.04             ces standard
 perl-VMware-vSphere          5.1.0-780721.1   ces standard
 ======================= ===================== ======================
 
-Install following dependency::
+Install following dependency:
+::
 
   # yum install perl-VMware-vSphere
 
@@ -88,7 +201,8 @@ Install the client:
 centreon-vmware Installation with source
 ````````````````````````````````````````
 
-Download « centreon-vmware » archive, then install ::
+Download « centreon-vmware » archive, then install:
+::
   
   # tar zxvf centreon-vmware-2.0.0.tar.gz
   # cd centreon-vmware-2.0.0
@@ -100,7 +214,7 @@ Download « centreon-vmware » archive, then install ::
   # cp contrib/redhat/centreon_vmware-sysconfig /etc/sysconfig/centreon_vmware
   # chmod 775 /etc/init.d/centreon_vmware /usr/bin/centreon_vmware.pl
   
-  # mkdir -p /usr/lib/perl5/vendor_perl/5.8.8/centreon/vmware/
+  # mkdir -p /usr/lib/perl5/vendor_perl/5.8.8/centreon/vmware/ /usr/lib/perl5/vendor_perl/5.8.8/centreon/script/
   # cp centreon/vmware/* /usr/lib/perl5/vendor_perl/5.8.8/centreon/vmware/
   # cp centreon/script/centreon_vmware.pm /usr/lib/perl5/vendor_perl/5.8.8/centreon/script/
 
@@ -117,11 +231,12 @@ Install « perl-centreon-base » dependency:
   # cp lib/perl/centreon/script.pm /usr/lib/perl5/vendor_perl/5.8.8/centreon/
   # cp -R lib/perl/centreon/common /usr/lib/perl5/vendor_perl/5.8.8/centreon/
   
-Install the client:
+Install the client and dependency:
 ::
 
   # git clone http://git.centreon.com/centreon-plugins.git
   # cd centreon-plugins
+  # cp -R centreon/plugins /usr/lib/perl5/vendor_perl/5.8.8/centreon/
   # mkdir -p /usr/lib/nagios/plugins/centreon/plugins/
   # cp centreon/plugins/* /usr/lib/nagios/plugins/centreon/plugins/
   # mkdir -p /usr/lib/nagios/plugins/apps/vmware/
@@ -195,7 +310,7 @@ Download « centreon-vmware » archive, then install:
   # cp contrib/redhat/centreon_vmware-sysconfig /etc/sysconfig/centreon_vmware
   # chmod 775 /etc/init.d/centreon_vmware /usr/bin/centreon_vmware.pl
   
-  # mkdir -p /usr/share/perl5/vendor_perl/centreon/vmware/
+  # mkdir -p /usr/share/perl5/vendor_perl/centreon/vmware/ /usr/share/perl5/vendor_perl/centreon/script/
   # cp centreon/vmware/* /usr/share/perl5/vendor_perl/centreon/vmware/
   # cp centreon/script/centreon_vmware.pm /usr/share/perl5/vendor_perl/centreon/script/
 
@@ -212,11 +327,12 @@ Install « perl-centreon-base » dependency:
   # cp lib/perl/centreon/script.pm /usr/share/perl5/vendor_perl/centreon/
   # cp -R lib/perl/centreon/common /usr/share/perl5/vendor_perl/centreon/
   
-Install the client:
+Install the client and dependency:
 ::
 
   # git clone http://git.centreon.com/centreon-plugins.git
   # cd centreon-plugins
+  # cp -R centreon/plugins /usr/share/perl5/vendor_perl/centreon/
   # mkdir -p /usr/lib/nagios/plugins/centreon/plugins/
   # cp centreon/plugins/* /usr/lib/nagios/plugins/centreon/plugins/
   # mkdir -p /usr/lib/nagios/plugins/apps/vmware/
diff --git a/connectors/vmware/doc/fr/installation/index.rst b/connectors/vmware/doc/fr/installation/index.rst
index 38686807b..113559dfb 100644
--- a/connectors/vmware/doc/fr/installation/index.rst
+++ b/connectors/vmware/doc/fr/installation/index.rst
@@ -35,6 +35,118 @@ Le matériel nécessaire dépend du nombre de demandes de vérifications. Par d
 * mémoire vive : 512 Mo minimum (Peut sensiblement augmenter en fonction du nombre de contrôle).
 * CPU : même pré-requis que pour le serveur de collecte.
 
+Centreon-vmware Installation - Debian Wheezy
+============================================
+
+Installation du SDK Perl VMWare
+```````````````````````````````
+
+Le connecteur « centreon-vmware » utilise le SDK Perl VMWare pour son fonctionnement. Nous allons donc l'installer en suivant les versions recommandées par VMWare (en dehors de ces versions, le fonctionnement n'est pas garanti).
+
+========================== ===================== ======================
+Dependency                  Version               Repository
+========================== ===================== ======================
+libwww-perl                   6.04                wheezy
+libxml-libxml-perl            2.0001              wheezy
+libclass-methodmaker-perl     2.18                wheezy
+libcrypt-ssleay-perl          0.58                wheezy
+libsoap-lite-perl             0.714               wheezy
+libuuid-perl                  0.02                wheezy
+========================== ===================== ======================
+
+Installer les dépendances suivantes:
+::
+
+  # aptitude install make libxml-libxml-perl libwww-perl libclass-methodmaker-perl libcrypt-ssleay-perl libsoap-lite-perl libuuid-perl
+
+Télécharger et installer le Perl SDK VMWare:
+::
+
+  # tar zxf VMware-vSphere-Perl-SDK-6.0.0-2503617.x86_64.tar.gz && cd vmware-vsphere-cli-distrib
+  # perl Makefile.PL
+  # make && make install
+
+Pré-requis
+``````````
+
+Les dépendances suivantes sont nécessaires pour le fonctionnement de « centreon_vmware »:
+
+* « perl-centreon-base »:  module depuis Centreon 2.5
+* « centreon-plugins-base »: le client et des dépendances
+* « zeromq » et son module Perl
+
+Les dépendances suivantes sont optionnelles pour le fonctionnement de « centreon_vmware »:
+
+*  « libtimedate-perl »
+
+Installation de centreon-vmware par les sources
+```````````````````````````````````````````````
+
+Installer le paquet suivant:
+::
+
+  # aptitude install libtimedate-perl
+
+Ajouter la ligne suivante dans le fichier  « /etc/apt/sources.list »:
+::
+
+  deb http://http.debian.net/debian wheezy-backports main
+
+Installer la dépendance « zeromq »:
+::
+
+  # aptitude install libzmq3-dev gcc
+  # wget https://cpan.metacpan.org/authors/id/D/DM/DMAKI/ZMQ-LibZMQ3-1.19.tar.gz
+  # tar zxf ZMQ-LibZMQ3-1.19.tar.gz && cd ZMQ-LibZMQ3-1.19
+  # perl Makefile.PL
+  # make && make install
+  # wget https://cpan.metacpan.org/authors/id/D/DM/DMAKI/ZMQ-Constants-1.04.tar.gz
+  # tar zxf ZMQ-Constants-1.04.tar.gz && cd ZMQ-Constants-1.04
+  # perl Makefile.PL
+  # make && make install
+
+Télécharger l'archive de « centreon-vmware » et installer le connecteur:
+::
+
+  # tar zxvf centreon-vmware-2.0.0.tar.gz
+  # cd centreon-vmware-2.0.0
+  # cp centreon_vmware.pl /usr/bin/
+  
+  # mkdir -p /etc/centreon
+  # cp contrib/config/centreon_vmware-conf.pm /etc/centreon/centreon_vmware.pm
+  # cp contrib/debian/centreon_vmware-init /etc/init.d/centreon_vmware
+  # cp contrib/debian/centreon_vmware-default /etc/default/centreon_vmware
+  # chmod 775 /etc/init.d/centreon_vmware /usr/bin/centreon_vmware.pl
+  
+  # mkdir -p /usr/share/perl5/centreon/vmware/ /usr/share/perl5/centreon/script/
+  # cp centreon/vmware/* /usr/share/perl5/centreon/vmware/
+  # cp centreon/script/centreon_vmware.pm /usr/share/perl5/centreon/script/
+
+Activer le daemon « centreon-vmware » au démarrage:
+::
+  
+  # update-rc.d centreon_vmware defaults
+
+Installer la dépendance « perl-centreon-base »:
+::
+
+  # git clone -b 2.6.x --single-branch https://github.com/centreon/centreon.git centreon
+  # cd centreon
+  # cp lib/perl/centreon/script.pm /usr/share/perl5/centreon/
+  # cp -R lib/perl/centreon/common /usr/share/perl5/centreon/
+  
+Installer le client et les dépendances:
+::
+
+  # git clone http://git.centreon.com/centreon-plugins.git
+  # cd centreon-plugins
+  # cp -R centreon/plugins /usr/share/perl5/centreon/
+  # mkdir -p /usr/lib/nagios/plugins/centreon/plugins/
+  # cp centreon/plugins/* /usr/lib/nagios/plugins/centreon/plugins/
+  # mkdir -p /usr/lib/nagios/plugins/apps/vmware/
+  # cp -R apps/vmware/* /usr/lib/nagios/plugins/apps/vmware/
+  # cp centreon_plugins.pl /usr/lib/nagios/plugins/
+
 Installation de centreon-vmware - Environnement centos/rhel 5
 =============================================================
 
@@ -55,7 +167,8 @@ perl-UUID                    0.04             ces standard
 perl-VMware-vSphere          5.1.0-780721.1   ces standard
 ======================= ===================== ======================
 
-Installer la dépendance suivante::
+Installer la dépendance suivante:
+::
 
   # yum install perl-VMware-vSphere
 
@@ -90,7 +203,8 @@ Installation de centreon-vmware par les sources
 
 Télécharger l'archive de « centreon-vmware ».
 
-Installer les fichiers::
+Installer les fichiers:
+::
   
   # tar zxvf centreon-vmware-2.0.0.tar.gz
   # cd centreon-vmware-2.0.0
@@ -102,11 +216,12 @@ Installer les fichiers::
   # cp contrib/redhat/centreon_vmware-sysconfig /etc/sysconfig/centreon_vmware
   # chmod 775 /etc/init.d/centreon_vmware /usr/bin/centreon_vmware.pl
   
-  # mkdir -p /usr/lib/perl5/vendor_perl/5.8.8/centreon/vmware/
+  # mkdir -p /usr/lib/perl5/vendor_perl/5.8.8/centreon/vmware/ /usr/lib/perl5/vendor_perl/5.8.8/centreon/script/
   # cp centreon/vmware/* /usr/lib/perl5/vendor_perl/5.8.8/centreon/vmware/
   # cp centreon/script/centreon_vmware.pm /usr/lib/perl5/vendor_perl/5.8.8/centreon/script/
 
-Activer le daemon « centreon-vmware » au démarrage::
+Activer le daemon « centreon-vmware » au démarrage:
+::
   
   # chkconfig --level 2345 centreon_vmware on
 
@@ -118,11 +233,12 @@ Installer la dépendance « perl-centreon-base »:
   # cp lib/perl/centreon/script.pm /usr/lib/perl5/vendor_perl/5.8.8/centreon/
   # cp -R lib/perl/centreon/common /usr/lib/perl5/vendor_perl/5.8.8/centreon/
   
-Installer le client:
+Installer le client et les dépendances:
 ::
 
   # git clone http://git.centreon.com/centreon-plugins.git
   # cd centreon-plugins
+  # cp -R centreon/plugins /usr/lib/perl5/vendor_perl/5.8.8/centreon/
   # mkdir -p /usr/lib/nagios/plugins/centreon/plugins/
   # cp centreon/plugins/* /usr/lib/nagios/plugins/centreon/plugins/
   # mkdir -p /usr/lib/nagios/plugins/apps/vmware/
@@ -198,10 +314,15 @@ Installer le connecteur:
   # cp contrib/redhat/centreon_vmware-sysconfig /etc/sysconfig/centreon_vmware
   # chmod 775 /etc/init.d/centreon_vmware /usr/bin/centreon_vmware.pl
   
-  # mkdir -p /usr/share/perl5/vendor_perl/centreon/vmware/
+  # mkdir -p /usr/share/perl5/vendor_perl/centreon/vmware/ /usr/share/perl5/vendor_perl/centreon/script/
   # cp centreon/vmware/* /usr/share/perl5/vendor_perl/centreon/vmware/
   # cp centreon/script/centreon_vmware.pm /usr/share/perl5/vendor_perl/centreon/script/
 
+Activer le daemon « centreon-vmware » au démarrage:
+::
+  
+  # chkconfig --level 2345 centreon_vmware on
+  
 Installer la dépendance « perl-centreon-base »:
 ::
 
@@ -210,11 +331,12 @@ Installer la dépendance « perl-centreon-base »:
   # cp lib/perl/centreon/script.pm /usr/share/perl5/vendor_perl/centreon/
   # cp -R lib/perl/centreon/common /usr/share/perl5/vendor_perl/centreon/
   
-Installer le client:
+Installer le client et les dépendances:
 ::
 
   # git clone http://git.centreon.com/centreon-plugins.git
   # cd centreon-plugins
+  # cp -R centreon/plugins /usr/share/perl5/vendor_perl/centreon/
   # mkdir -p /usr/lib/nagios/plugins/centreon/plugins/
   # cp centreon/plugins/* /usr/lib/nagios/plugins/centreon/plugins/
   # mkdir -p /usr/lib/nagios/plugins/apps/vmware/
diff --git a/connectors/vmware/packaging/debian/centreon_vmware-default b/connectors/vmware/packaging/debian/centreon_vmware-default
new file mode 100644
index 000000000..a5aca771a
--- /dev/null
+++ b/connectors/vmware/packaging/debian/centreon_vmware-default
@@ -0,0 +1,9 @@
+# Configuration for /etc/init.d/centreon_vmware
+
+# If run centcore at startup default: YES
+RUN_AT_STARTUP="YES"
+
+# Centreon user default: root
+CENTREON_USER="root"
+
+OPTIONS="--logfile=/var/log/centreon_vmware.log --severity=error"
\ No newline at end of file
diff --git a/connectors/vmware/packaging/debian/centreon_vmware-init b/connectors/vmware/packaging/debian/centreon_vmware-init
new file mode 100644
index 000000000..7a44d6d80
--- /dev/null
+++ b/connectors/vmware/packaging/debian/centreon_vmware-init
@@ -0,0 +1,105 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides:		centreon_vmware.pl
+# Required-Start:	$local_fs $network
+# Required-Stop:	$local_fs $network
+# Default-Start:	2 3 4 5
+# Default-Stop:		0 1 6
+# Should-Start:		
+# Should-Stop:
+# Short-Description:	Start daemon centreon_vmware.pl at boot
+# Description:		
+### END INIT INFO
+
+PKGNAME=centreon_vmware
+DESC="centreon-vmware"
+DAEMON=/usr/bin/centreon_vmware.pl
+PIDFILE=/var/run/centreon/centreon_vmware.pid
+FOLDER=/var/run/centreon/
+if [ ! -d "$FOLDER" ]; then # Control will enter here if $DIRECTORY doesn't exist.
+    mkdir $FOLDER
+fi
+
+if [ ! -x "${DAEMON}" ]; then
+  echo "The program ${DAEMON} does not exists or is not executable"
+  exit 3
+fi
+
+# Include the default user configuration if exists
+[ -r /etc/default/${PKGNAME} ] && . /etc/default/${PKGNAME}
+
+# Load the VERBOSE setting and other rcS variables
+[ -f /etc/init/vars.sh ] && . /etc/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+if [ -z "${RUN_AT_STARTUP}" -o "${RUN_AT_STARTUP}" != "YES" ]; then
+    log_warning_msg "Not starting $PKGNAME, edit /etc/default/$PKGNAME to start it."
+    exit 0
+fi
+
+if [ -z "${CENTREON_USER}" ]; then
+    log_warning_msg "Not starting $PKGNAME, CENTREON_USER not set in /etc/default/$PKGNAME."
+    exit 0
+fi
+
+do_start()
+{
+  start-stop-daemon --start --background --quiet --pidfile ${PIDFILE} --exec ${DAEMON} \
+    --chuid ${CENTREON_USER} --user ${CENTREON_USER} --test -- $OPTIONS
+  [ "$?" = "0" ] || return 1
+  start-stop-daemon --start --background --quiet --pidfile ${PIDFILE} --exec ${DAEMON} \
+    --make-pidfile --chuid ${CENTREON_USER} --user ${CENTREON_USER} -- $OPTIONS
+  [ "$?" = "0" ] || return 2
+  return 0
+}
+
+do_stop()
+{
+  start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --user ${CENTREON_USER} --pidfile ${PIDFILE}
+  [ "$?" = "2" ] && return 2
+  rm -rf ${PIDFILE}
+  [ "$?" = 0 ] && return 0 || return 1
+}
+
+case "$1" in
+  start)
+    [ "${VERBOSE}" != "no" ] && log_daemon_msg "Starting ${DESC}" "${PKGNAME}"
+    do_start
+    case "$?" in
+      0|1) [ "${VERBOSE}" != "no" ] && log_end_msg 0 ;;
+      2) [ "${VERBOSE}" != "no" ] && log_end_msg 1 ;;
+    esac
+    ;;
+   stop)
+     [ "${VERBOSE}" != no ] && log_daemon_msg "Stopping ${DESC}" "${PKGNAME}"
+     do_stop
+     case "$?" in
+       0|1) [ "${VERBOSE}" != no ] && log_end_msg 0 ;;
+       2) [ "${VERBOSE}" != no ] && log_end_msg 1 ;;
+     esac
+     ;;
+   status)
+     status_of_proc ${DAEMON} ${PKGNAME} -p ${PIDFILE}
+     ;;
+   restart|force-reload)
+     [ "${VERBOSE}" != no ] && log_daemon_msg "Restarting ${DESC}" "${PKGNAME}"
+     do_stop
+     case "$?" in
+       0|1)
+        do_start
+        case "$?" in
+          0) log_end_msg 0 ;;
+          1) log_end_msg 1 ;;
+          *) log_end_msg 1 ;;
+        esac
+        ;;
+       *) log_end_msg 1 ;;
+     esac
+     ;;
+   *)
+     echo "Usage: ${SCRIPTNAME} (start|stop|status|restart|force-reload)" >&2
+     exit 3
+esac
\ No newline at end of file