Fix #1708

centreon-plugins/centreon/common/cisco/smallbusiness/snmp/mode/components/temperature.pm

@@ -0,0 +1,98 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package centreon::common::cisco::smallbusiness::snmp::mode::components::temperature;
+
+use strict;
+use warnings;
+
+my $mapping = {
+    rlPhdUnitEnvParamTempSensorValue                  => { oid => '.1.3.6.1.4.1.9.6.1.101.53.15.1.10' },
+    rlPhdUnitEnvParamTempSensorWarningThresholdValue  => { oid => '.1.3.6.1.4.1.9.6.1.101.53.15.1.12' },
+    rlPhdUnitEnvParamTempSensorCriticalThresholdValue => { oid => '.1.3.6.1.4.1.9.6.1.101.53.15.1.13' },
+};
+my $oid_rlPhdUnitEnvParamEntry = '.1.3.6.1.4.1.9.6.1.101.53.15.1';
+
+sub load {
+    my ($self) = @_;
+    
+    push @{$self->{request}}, {
+        oid => $oid_rlPhdUnitEnvParamEntry,
+        start => $mapping->{rlPhdUnitEnvParamTempSensorValue}->{oid},
+        end => $mapping->{rlPhdUnitEnvParamTempSensorCriticalThresholdValue}->{oid},
+    };
+}
+
+sub check {
+    my ($self) = @_;
+
+    $self->{output}->output_add(long_msg => "Checking temperatures");
+    $self->{components}->{temperature} = {name => 'temperatures', total => 0, skip => 0};
+    return if ($self->check_filter(section => 'temperature'));
+
+    foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_rlPhdUnitEnvParamEntry}})) {
+        next if ($oid !~ /^$mapping->{rlPhdUnitEnvParamTempSensorValue}->{oid}\.(.*)$/);
+        my $instance = $1;
+        my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_rlPhdUnitEnvParamEntry}, instance => $instance);
+        
+        next if ($self->check_filter(section => 'temperature', instance => $instance));
+        $self->{components}->{temperature}->{total}++;
+
+        $self->{output}->output_add(
+            long_msg => sprintf(
+                "temperature '%s' is %s degree centigrade [instance = %s]",
+                $instance, $result->{rlPhdUnitEnvParamTempSensorValue}, $instance, 
+            )
+        );
+
+        my ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'temperature', instance => $instance, value => $result->{rlPhdUnitEnvParamTempSensorValue});
+        if ($checked == 0) {
+            my $warn_th = ':' . $result->{rlPhdUnitEnvParamTempSensorWarningThresholdValue};
+            my $crit_th = ':' . $result->{rlPhdUnitEnvParamTempSensorCriticalThresholdValue};
+            $self->{perfdata}->threshold_validate(label => 'warning-temperature-instance-' . $instance, value => $warn_th);
+            $self->{perfdata}->threshold_validate(label => 'critical-temperature-instance-' . $instance, value => $crit_th);
+
+            $exit = $self->{perfdata}->threshold_check(
+                value => $result->{rlPhdUnitEnvParamTempSensorValue}, 
+                threshold => [
+                    { label => 'critical-temperature-instance-' . $instance, exit_litteral => 'critical' },
+                    { label => 'warning-temperature-instance-' . $instance, exit_litteral => 'warning' }
+                ]
+            );
+            $warn = $self->{perfdata}->get_perfdata_for_output(label => 'warning-temperature-instance-' . $instance);
+            $crit = $self->{perfdata}->get_perfdata_for_output(label => 'critical-temperature-instance-' . $instance);
+        }
+        
+        if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
+            $self->{output}->output_add(severity => $exit,
+                                        short_msg => sprintf("Temperature '%s' is %s degree centigrade", $instance, $result->{rlPhdUnitEnvParamTempSensorValue}));
+        }
+        $self->{output}->perfdata_add(
+            label => 'temp', unit => 'C',
+            nlabel => 'hardware.temperature.celsius',
+            instances => $instance,
+            value => $result->{rlPhdUnitEnvParamTempSensorValue},
+            warning => $warn,
+            critical => $crit,
+        );
+    }
+}
+
+1;

centreon-plugins/centreon/common/cisco/smallbusiness/snmp/mode/environment.pm

@@ -28,7 +28,8 @@ use warnings;
 sub set_system {
     my ($self, %options) = @_;
     
-    $self->{regexp_threshold_overload_check_section_option} = '^(fan|psu)$';
+    $self->{regexp_threshold_overload_check_section_option} = '^(?:fan|psu|temperature)$';
+     $self->{regexp_threshold_numeric_check_section_option} = '^temperature$';
     
     $self->{cb_hook2} = 'snmp_execute';
     
@@ -52,7 +53,7 @@ sub set_system {
     };
     
     $self->{components_path} = 'centreon::common::cisco::smallbusiness::snmp::mode::components';
-    $self->{components_module} = ['psu', 'fan'];
+    $self->{components_module} = ['psu', 'fan', 'temperature'];
 }
 
 sub snmp_execute {
@@ -64,11 +65,10 @@ sub snmp_execute {
 
 sub new {
     my ($class, %options) = @_;
-    my $self = $class->SUPER::new(package => __PACKAGE__, %options, no_performance => 1);
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
     bless $self, $class;
 
-    $options{options}->add_options(arguments =>
+    $options{options}->add_options(arguments => {
-                                {
     });
 
     return $self;
@@ -80,14 +80,14 @@ __END__
 
 =head1 MODE
 
-Check environment (Fans, Power supplies).
+Check environment.
 
 =over 8
 
 =item B<--component>
 
 Which component to check (Default: '.*').
-Can be: 'fan', 'psu'.
+Can be: 'fan', 'psu', 'temperature'.
 
 =item B<--filter>
 
@@ -110,6 +110,16 @@ Set to overload default threshold values (syntax: section,[instance,]status,rege
 It used before default thresholds (order stays).
 Example: --threshold-overload='fan,CRITICAL,^(?!(normal)$)'
 
+=item B<--warning>
+
+Set warning threshold (syntax: type,regexp,threshold)
+Example: --warning='temperature,.*,30'
+
+=item B<--critical>
+
+Set critical threshold (syntax: type,regexp,threshold)
+Example: --critical='temperature,.*,40'
+
 =back
 
 =cut