diff --git a/centreon/common/cps/ups/snmp/mode/batterystatus.pm b/centreon/common/cps/ups/snmp/mode/batterystatus.pm
new file mode 100644
index 000000000..07b28ebba
--- /dev/null
+++ b/centreon/common/cps/ups/snmp/mode/batterystatus.pm
@@ -0,0 +1,166 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package centreon::common::cps::ups::snmp::mode::batterystatus;
+
+use base qw(centreon::plugins::templates::counter);
+
+use strict;
+use warnings;
+use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold catalog_status_calc);
+
+sub custom_status_output {
+    my ($self, %options) = @_;
+
+    return sprintf('battery status is %s', $self->{result_values}->{status});
+}
+
+sub custom_load_output {
+    my ($self, %options) = @_;
+
+    return sprintf("charge remaining: %s%% (%s minutes remaining)", 
+        $self->{result_values}->{charge_remain_absolute},
+        $self->{result_values}->{minute_remain_absolute}
+    );
+}
+
+sub set_counters {
+    my ($self, %options) = @_;
+
+    $self->{maps_counters_type} = [
+        { name => 'global', type => 0, message_separator => ' - ', skipped_code => { -10 => 1 } },
+    ];
+
+    $self->{maps_counters}->{global} = [
+        { label => 'status', threshold => 0, set => {
+                key_values => [ { name => 'status' } ],
+                closure_custom_calc => \&catalog_status_calc,
+                closure_custom_output => $self->can('custom_status_output'),
+                closure_custom_perfdata => sub { return 0; },
+                closure_custom_threshold_check => \&catalog_status_threshold,
+            }
+        },
+        { label => 'charge-remaining', nlabel => 'battery.charge.remaining.percent', set => {
+                key_values => [ { name => 'charge_remain' }, { name => 'minute_remain' } ],
+                closure_custom_output => $self->can('custom_load_output'),
+                perfdatas => [
+                    { value => 'charge_remain_absolute', template => '%s', min => 0, max => 100, unit => '%' },
+                ],
+            }
+        },
+        { label => 'voltage', nlabel => 'battery.voltage.volt', display_ok => 0, set => {
+                key_values => [ { name => 'voltage', no_value => 0 } ],
+                output_template => 'voltage: %s V',
+                perfdatas => [
+                    { value => 'voltage_absolute', template => '%s', unit => 'V' },
+                ],
+            }
+        },
+        { label => 'temperature', nlabel => 'battery.temperature.celsius', display_ok => 0, set => {
+                key_values => [ { name => 'temperature', no_value => 0 } ],
+                output_template => 'temperature: %s C',
+                perfdatas => [
+                    { value => 'temperature_absolute', template => '%s', unit => 'C' },
+                ],
+            }
+        },
+    ];
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+    
+    $options{options}->add_options(arguments => { 
+        'unknown-status:s'      => { name => 'unknown_status', default => '%{status} =~ /unknown|notPresent/i' },
+        'warning-status:s'      => { name => 'warning_status', default => '%{status} =~ /low/i' },
+        'critical-status:s'     => { name => 'critical_status', default => '' },
+    });
+
+    return $self;
+}
+
+sub check_options {
+    my ($self, %options) = @_;
+    $self->SUPER::check_options(%options);
+
+    $self->change_macros(macros => ['unknown_status', 'warning_status', 'critical_status']);
+}
+
+my $map_status = { 1 => 'unknown', 2 => 'normal', 3 => 'low', 4 => 'notPresent' };
+
+my $mapping = {
+    upsBaseBatteryStatus              => { oid => '.1.3.6.1.4.1.3808.1.1.1.2.1.1', map => $map_status },
+    upsAdvanceBatteryCapacity         => { oid => '.1.3.6.1.4.1.3808.1.1.1.2.2.1' },
+    upsAdvanceBatteryVoltage          => { oid => '.1.3.6.1.4.1.3808.1.1.1.2.2.2' }, # in dV
+    upsAdvanceBatteryTemperature      => { oid => '.1.3.6.1.4.1.3808.1.1.1.2.2.3' }, # in degrees Centigrade
+    upsAdvanceBatteryRunTimeRemaining => { oid => '.1.3.6.1.4.1.3808.1.1.1.2.2.4' },
+};
+
+sub manage_selection {
+    my ($self, %options) = @_;
+    
+    my $oid_upsBattery = '.1.3.6.1.4.1.3808.1.1.1.2';
+    my $snmp_result = $options{snmp}->get_table(oid => $oid_upsBattery, nothing_quit => 1);
+    my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => '0');
+
+    $self->{global} = {
+        voltage => (defined($result->{upsAdvanceBatteryVoltage}) && $result->{upsAdvanceBatteryVoltage} =~ /\d/) ? $result->{upsAdvanceBatteryVoltage} * 0.1 : 0,
+        temperature => $result->{upsAdvanceBatteryTemperature},
+        minute_remain => (defined($result->{upsAdvanceBatteryRunTimeRemaining}) && $result->{upsAdvanceBatteryRunTimeRemaining} =~ /\d/) ? ($result->{upsAdvanceBatteryRunTimeRemaining} / 100 / 60) : 'unknown',
+        charge_remain => (defined($result->{upsAdvanceBatteryCapacity}) && $result->{upsAdvanceBatteryCapacity} =~ /\d/) ? $result->{upsAdvanceBatteryCapacity} : undef,
+        status => $result->{upsBaseBatteryStatus},
+    };
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check battery status and charge remaining.
+
+=over 8
+
+=item B<--unknown-status>
+
+Set warning threshold for status (Default: '%{status} =~ /unknown|notPresent/i').
+Can used special variables like: %{status}
+
+=item B<--warning-status>
+
+Set warning threshold for status (Default: '%{status} =~ /low/i').
+Can used special variables like: %{status}
+
+=item B<--critical-status>
+
+Set critical threshold for status (Default: '').
+Can used special variables like: %{status}
+
+=item B<--warning-*> B<--critical-*>
+
+Thresholds.
+Can be: 'charge-remaining' (%), 'voltage' (V), 'temperature' (C).
+
+=back
+
+=cut
diff --git a/centreon/common/cps/ups/snmp/mode/inputlines.pm b/centreon/common/cps/ups/snmp/mode/inputlines.pm
new file mode 100644
index 000000000..6494446a8
--- /dev/null
+++ b/centreon/common/cps/ups/snmp/mode/inputlines.pm
@@ -0,0 +1,154 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package centreon::common::cps::ups::snmp::mode::inputlines;
+
+use base qw(centreon::plugins::templates::counter);
+
+use strict;
+use warnings;
+use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold catalog_status_calc);
+
+sub custom_status_output {
+    my ($self, %options) = @_;
+
+    return sprintf("status is '%s'", $self->{result_values}->{status});
+}
+
+sub set_counters {
+    my ($self, %options) = @_;
+    
+    $self->{maps_counters_type} = [
+        { name => 'ilines', type => 0, cb_prefix_output => 'prefix_ilines_output', skipped_code => { -10 => 1 } },
+    ];
+
+    $self->{maps_counters}->{ilines} = [
+        { label => 'status', threshold => 0, set => {
+                key_values => [ { name => 'status' } ],
+                closure_custom_calc => \&catalog_status_calc,
+                closure_custom_output => $self->can('custom_status_output'),
+                closure_custom_perfdata => sub { return 0; },
+                closure_custom_threshold_check => \&catalog_status_threshold,
+            }
+        },
+        { label => 'voltage', nlabel => 'lines.input.voltage.volt', set => {
+                key_values => [ { name => 'voltage' } ],
+                output_template => 'Voltage : %.2f V',
+                perfdatas => [
+                    { value => 'voltage_absolute', template => '%.2f', unit => 'V' },
+                ],
+            }
+        },
+        { label => 'frequence', nlabel => 'lines.input.frequence.hertz', set => {
+                key_values => [ { name => 'frequence' } ],
+                output_template => 'Frequence : %.2f Hz',
+                perfdatas => [
+                    { value => 'frequence_absolute', template => '%.2f', min => 0, unit => 'Hz' },
+                ],
+            }
+        },
+    ];
+}
+
+sub prefix_ilines_output {
+    my ($self, %options) = @_;
+
+    return 'Input ';
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+    
+    $options{options}->add_options(arguments => {
+        'unknown-status:s'      => { name => 'unknown_status', default => '' },
+        'warning-status:s'      => { name => 'warning_status', default => '' },
+        'critical-status:s'     => { name => 'critical_status', default => '%{status} !~ /normal/' },
+    });
+
+    return $self;
+}
+
+sub check_options {
+    my ($self, %options) = @_;
+    $self->SUPER::check_options(%options);
+
+    $self->change_macros(macros => ['unknown_status', 'warning_status', 'critical_status']);
+}
+
+my $map_status = { 
+    1 => 'normal', 2 => 'overVoltage',
+    3 => 'underVoltage', 4 => 'frequencyFailure', 5 => 'blackout',
+};
+
+my $mapping = {
+    upsAdvanceInputLineVoltage => { oid => '.1.3.6.1.4.1.3808.1.1.1.3.2.1' }, # in dV
+    upsAdvanceInputFrequency   => { oid => '.1.3.6.1.4.1.3808.1.1.1.3.2.4' }, # in dHz
+    upsAdvanceInputStatus      => { oid => '.1.3.6.1.4.1.3808.1.1.1.3.2.6', map => $map_status },
+};
+
+sub manage_selection {
+    my ($self, %options) = @_;
+
+    my $oid_upsAdvanceInput = '.1.3.6.1.4.1.3808.1.1.1.3.2';
+    my $snmp_result = $options{snmp}->get_table(oid => $oid_upsAdvanceInput, nothing_quit => 1);
+    my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => '0');
+
+    $self->{ilines} = {
+        frequence => (defined($result->{upsAdvanceInputFrequency}) && $result->{upsAdvanceInputFrequency} =~ /\d/) ? $result->{upsAdvanceInputFrequency} * 0.1 : undef,
+        voltage => (defined($result->{upsAdvanceInputLineVoltage}) && $result->{upsAdvanceInputLineVoltage} =~ /\d/) ? $result->{upsAdvanceInputLineVoltage} * 0.1 : undef,
+        status => $result->{upsAdvanceInputStatus},
+    };
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check INPUT lines metrics.
+
+=over 8
+
+=item B<--unknown-status>
+
+Set warning threshold for status (Default: '').
+Can used special variables like: %{status}
+
+=item B<--warning-status>
+
+Set warning threshold for status (Default: '').
+Can used special variables like: %{status}
+
+=item B<--critical-status>
+
+Set critical threshold for status (Default: '%{status} !~ /normal/').
+Can used special variables like: %{status}
+
+=item B<--warning-*> B<--critical-*>
+
+Thresholds.
+Can be: 'voltage', 'frequence'.
+
+=back
+
+=cut
diff --git a/centreon/common/cps/ups/snmp/mode/outputlines.pm b/centreon/common/cps/ups/snmp/mode/outputlines.pm
new file mode 100644
index 000000000..7efe70d9a
--- /dev/null
+++ b/centreon/common/cps/ups/snmp/mode/outputlines.pm
@@ -0,0 +1,188 @@
+#
+# Copyright 2019 Centreon (http://www.centreon.com/)
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package centreon::common::cps::ups::snmp::mode::outputlines;
+
+use base qw(centreon::plugins::templates::counter);
+
+use strict;
+use warnings;
+use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold catalog_status_calc);
+
+sub custom_status_output {
+    my ($self, %options) = @_;
+
+    return sprintf("status is '%s'", $self->{result_values}->{status});
+}
+
+sub set_counters {
+    my ($self, %options) = @_;
+    
+    $self->{maps_counters_type} = [
+        { name => 'olines', type => 0, cb_prefix_output => 'prefix_olines_output', skipped_code => { -10 => 1 } },
+    ];
+
+    $self->{maps_counters}->{olines} = [
+        { label => 'status', threshold => 0, set => {
+                key_values => [ { name => 'status' } ],
+                closure_custom_calc => \&catalog_status_calc,
+                closure_custom_output => $self->can('custom_status_output'),
+                closure_custom_perfdata => sub { return 0; },
+                closure_custom_threshold_check => \&catalog_status_threshold,
+            }
+        },
+        { label => 'load', nlabel => 'lines.output.load.percentage', set => {
+                key_values => [ { name => 'load' } ],
+                output_template => 'Load : %.2f %%',
+                perfdatas => [
+                    { value => 'load_absolute', template => '%.2f', min => 0, max => 100, unit => '%' },
+                ],
+            }
+        },
+        { label => 'current', nlabel => 'lines.output.current.ampere', set => {
+                key_values => [ { name => 'current' } ],
+                output_template => 'Current : %.2f A',
+                perfdatas => [
+                    { value => 'current_absolute', template => '%.2f', min => 0, unit => 'A' },
+                ],
+            }
+        },
+        { label => 'voltage', nlabel => 'lines.output.voltage.volt', set => {
+                key_values => [ { name => 'voltage' } ],
+                output_template => 'Voltage : %.2f V',
+                perfdatas => [
+                    { value => 'voltage_absolute', template => '%.2f', unit => 'V' },
+                ],
+            }
+        },
+        { label => 'power', nlabel => 'lines.output.power.watt', set => {
+                key_values => [ { name => 'power' } ],
+                output_template => 'Power : %.2f W',
+                perfdatas => [
+                    { value => 'power_absolute', template => '%.2f', min => 0, unit => 'W' },
+                ],
+            }
+        },
+        { label => 'frequence', nlabel => 'lines.output.frequence.hertz', set => {
+                key_values => [ { name => 'frequence' } ],
+                output_template => 'Frequence : %.2f Hz',
+                perfdatas => [
+                    { value => 'frequence_absolute', template => '%.2f', min => 0, unit => 'Hz' },
+                ],
+            }
+        },
+    ];
+}
+
+sub prefix_olines_output {
+    my ($self, %options) = @_;
+
+    return 'Output ';
+}
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options, force_new_perfdata => 1);
+    bless $self, $class;
+    
+    $options{options}->add_options(arguments => {
+        'unknown-status:s'      => { name => 'unknown_status', default => '%{status} =~ /unknown/i' },
+        'warning-status:s'      => { name => 'warning_status', default => '%{status} =~ /rebooting|onBattery|onBypass/i' },
+        'critical-status:s'     => { name => 'critical_status', default => '' },
+    });
+
+    return $self;
+}
+
+sub check_options {
+    my ($self, %options) = @_;
+    $self->SUPER::check_options(%options);
+
+    $self->change_macros(macros => ['unknown_status', 'warning_status', 'critical_status']);
+}
+
+my $map_status = { 
+    1 => 'unknown', 2 => 'onLine',
+    3 => 'onBattery', 4 => 'onBoost',
+    5 => 'onSleep', 6 => 'off',
+    7 => 'rebooting', 8 => 'onECO',
+    9 => 'onBypass', 10 => 'onBuck',
+    11 => 'onOverload', 
+};
+
+my $mapping = {
+    upsBaseOutputStatus         => { oid => '.1.3.6.1.4.1.3808.1.1.1.4.1.1', map => $map_status },
+    upsAdvanceOutputVoltage     => { oid => '.1.3.6.1.4.1.3808.1.1.1.4.2.1' }, # in dV
+    upsAdvanceOutputFrequency   => { oid => '.1.3.6.1.4.1.3808.1.1.1.4.2.2' }, # in dHz
+    upsAdvanceOutputLoad        => { oid => '.1.3.6.1.4.1.3808.1.1.1.4.2.3' }, # in %
+    upsAdvanceOutputCurrent     => { oid => '.1.3.6.1.4.1.3808.1.1.1.4.2.4' }, # in dA
+    upsAdvanceOutputPower       => { oid => '.1.3.6.1.4.1.3808.1.1.1.4.2.5' }, # in W
+};
+
+sub manage_selection {
+    my ($self, %options) = @_;
+
+    my $oid_upsOutput = '.1.3.6.1.4.1.3808.1.1.1.4';
+    my $snmp_result = $options{snmp}->get_table(oid => $oid_upsOutput, nothing_quit => 1);
+    my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => '0');
+
+    $self->{olines} = {
+        frequence => (defined($result->{upsAdvanceOutputFrequency}) && $result->{upsAdvanceOutputFrequency} =~ /\d/) ? $result->{upsAdvanceOutputFrequency} * 0.1 : undef,
+        voltage => (defined($result->{upsAdvanceOutputVoltage}) && $result->{upsAdvanceOutputVoltage} =~ /\d/) ? $result->{upsAdvanceOutputVoltage} * 0.1 : undef,
+        current => (defined($result->{upsAdvanceOutputCurrent}) && $result->{upsAdvanceOutputCurrent} =~ /\d/) ? $result->{upsAdvanceOutputCurrent} * 0.1 : undef,
+        load => (defined($result->{upsAdvanceOutputLoad}) && $result->{upsAdvanceOutputLoad} =~ /\d/) ? $result->{upsAdvanceOutputLoad} : undef,
+        power => (defined($result->{upsAdvanceOutputPower}) && $result->{upsAdvanceOutputPower} =~ /\d/) ? $result->{upsAdvanceOutputPower} : undef,
+        status => $result->{upsBaseOutputStatus},
+    };
+}
+
+1;
+
+__END__
+
+=head1 MODE
+
+Check output lines metrics.
+
+=over 8
+
+=item B<--unknown-status>
+
+Set warning threshold for status (Default: '%{status} =~ /unknown/i').
+Can used special variables like: %{status}
+
+=item B<--warning-status>
+
+Set warning threshold for status (Default: '%{status} =~ /rebooting|onBattery|onBypass/i').
+Can used special variables like: %{status}
+
+=item B<--critical-status>
+
+Set critical threshold for status (Default: '').
+Can used special variables like: %{status}
+
+=item B<--warning-*> B<--critical-*>
+
+Thresholds.
+Can be: 'load', 'voltage', 'current', 'power', 'frequence'.
+
+=back
+
+=cut
diff --git a/hardware/ups/nitram/snmp/plugin.pm b/hardware/ups/nitram/snmp/plugin.pm
new file mode 100644
index 000000000..0954a2b88
--- /dev/null
+++ b/hardware/ups/nitram/snmp/plugin.pm
@@ -0,0 +1,48 @@
+#
+# Centreon is a full-fledged industry-strength solution that meets
+# the needs in IT infrastructure and application monitoring for
+# service performance.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+package hardware::ups::nitram::snmp::plugin;
+
+use strict;
+use warnings;
+use base qw(centreon::plugins::script_snmp);
+
+sub new {
+    my ($class, %options) = @_;
+    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
+    bless $self, $class;
+    
+    $self->{version} = '0.1';
+    %{$self->{modes}} = (
+        'battery-status'    => 'centreon::common::cps::ups::snmp::mode::batterystatus',
+        'input-lines'       => 'centreon::common::cps::ups::snmp::mode::inputlines',
+        'output-lines'      => 'centreon::common::cps::ups::snmp::mode::outputlines',
+    );
+
+    return $self;
+}
+
+1;
+
+__END__
+
+=head1 PLUGIN DESCRIPTION
+
+Check UPS Nitram in SNMP.
+
+=cut