#
# Copyright 2020 Centreon (http://www.centreon.com/)
#
# Centreon is a full-fledged industry-strength solution that meets
# the needs in IT infrastructure and application monitoring for
# service performance.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

package storage::emc::celerra::local::mode::getreason;

use base qw(centreon::plugins::templates::hardware);

use strict;
use warnings;

sub set_system {
    my ($self, %options) = @_;

    $self->{cb_hook2} = 'cmd_execute';
    
    $self->{thresholds} = {
        controlstation => [
            ['Primary Control Station', 'OK'], # 10
            ['Secondary Control Station', 'OK'], # 11
            ['Control Station is ready, but is not running NAS service', 'CRITICAL'] # 6
        ],
        datamover => [
            ['Reset (or unknown state)', 'WARNING'],
            ['DOS boot phase, BIOS check, boot sequence', 'WARNING'],
            ['SIB POST failures (that is, hardware failures)', 'CRITICAL'],
            ['DART is loaded on Data Mover, DOS boot and execution of boot.bat, boot.cfg', 'WARNING'],
            ['DART is ready on Data Mover, running, and MAC threads started', 'WARNING'],
            ['DART is in contact with Control Station box monitor', 'OK'],
            ['DART is in panic state', 'CRITICAL'],
            ['DART reboot is pending or in halted state', 'WARNING'],
            ['DART panicked and completed memory dump', 'CRITICAL'],
            ['DM Misc problems', 'CRITICAL'], # code 14
            ['Data Mover is flashing firmware. DART is flashing BIOS and/or POST firmware. Data Mover cannot be reset', 'CRITICAL'],
            ['Data Mover Hardware fault detected', 'CRITICAL'],
            ['DM Memory Test Failure. BIOS detected memory error', 'CRITICAL'],
            ['DM POST Test Failure. General POST error', 'CRITICAL'],
            ['DM POST NVRAM test failure. Invalid NVRAM content error', 'CRITICAL'],
            ['DM POST invalid peer Data Mover type', 'CRITICAL'],
            ['DM POST invalid Data Mover part number', 'CRITICAL'],
            ['DM POST Fibre Channel test failure. Error in blade Fibre connection', 'CRITICAL'],
            ['DM POST network test failure. Error in Ethernet controller', 'CRITICAL'],
            ['DM T2NET Error. Unable to get blade reason code due to management switch problems', 'CRITICAL']
        ]
    };
    
    $self->{components_path} = 'storage::emc::celerra::local::mode::components';
    $self->{components_module} = ['controlstation', 'datamover'];
}

sub cmd_execute {
    my ($self, %options) = @_;

    ($self->{stdout}, my $exit_code) = $options{custom}->execute_command(
        command => 'getreason',
        command_path => '/nas/sbin',
        command_options => '2>&1',
        no_quit => 1
    );

    if ($exit_code != 0 && $exit_code != 255) {
        $self->{output}->add_option_msg(short_msg => "Command error: $self->{stdout}");
        $self->{output}->option_exit();
    }
}

sub new {
    my ($class, %options) = @_;
    my $self = $class->SUPER::new(package => __PACKAGE__, %options, no_absent => 1, no_performance => 1);
    bless $self, $class;

    $options{options}->add_options(arguments => {
    });

    return $self;
}

1;

__END__

=head1 MODE

Check control stations and data movers status.

Command used: /nas/sbin/getreason 2>&1

=over 8

=item B<--component>

Which component to check (Default: '.*').
Can be: 'controlstation', 'datamover'.

=item B<--filter>

Exclude some parts (comma seperated list) (Example: --filter=datamover)
Can also exclude specific instance: --filter=datamover,slot_2

=item B<--no-component>

Return an error if no compenents are checked.
If total (with skipped) is 0. (Default: 'critical' returns).

=item B<--threshold-overload>

Set to overload default threshold values (syntax: section,[instance,]status,regexp)
It used before default thresholds (order stays).
Example: --threshold-overload='datamover,CRITICAL,^(?!(normal)$)'

=back

=cut