################################################################################
# Copyright 2005-2013 MERETHIS
# Centreon is developped by : Julien Mathis and Romain Le Merlus under
# GPL Licence 2.0.
#
# This program is free software; you can redistribute it and/or modify it under
# the terms of the GNU General Public License as published by the Free Software
# Foundation ; either version 2 of the License.
#
# This program is distributed in the hope that it will be useful, but WITHOUT ANY
# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE. See the GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along with
# this program; if not, see <http://www.gnu.org/licenses>.
#
# Linking this program statically or dynamically with other modules is making a
# combined work based on this program. Thus, the terms and conditions of the GNU
# General Public License cover the whole combination.
#
# As a special exception, the copyright holders of this program give MERETHIS
# permission to link this program with independent modules to produce an executable,
# regardless of the license terms of these independent modules, and to copy and
# distribute the resulting executable under terms of MERETHIS choice, provided that
# MERETHIS also meet, for each linked independent module, the terms and conditions
# of the license of that module. An independent module is a module which is not
# derived from this program. If you modify this program, you may extend this
# exception to your version of the program, but you are not obliged to do so. If you
# do not wish to do so, delete this exception statement from your version.
#
# For more information : contact@centreon.com
# Authors : Florian Asche <info@florian-asche.de>
#
####################################################################################
#
# see http://manned.org/apcaccess
#
#sprung:~# apcaccess #
#APC : 001,048,1163 # version, number of records and number of bytes following
#DATE : 2014-03-15 19:30:58 +0100 # Date and time of last update from UPS
#HOSTNAME : sprung # hostname of computer running apcupsd
#VERSION : 3.14.8 (16 January 2010) debian # apcupsd version number, date and operating system
#UPSNAME : APC_ESX_SERVER # UPS name from configuration file (dumb) or EEPROM (smart)
#CABLE : Custom Cable Smart # Cable type specified in the configuration file
#MODEL : Smart-UPS 620 # UPS model derived from UPS information
#UPSMODE : ShareUPS Master # Mode in which UPS is operating
#STARTTIME: 2014-03-13 22:40:39 +0100 # Date and time apcupsd was started
#STATUS : ONLINE # UPS status (online, charging, on battery etc)
#LINEV : 224.6 Volts # Current input line voltage
#LOADPCT : 58.5 Percent Load Capacity # Percentage of UPS load capacity used as estimated by UPS
#BCHARGE : 100.0 Percent # Current battery capacity charge percentage
#TIMELEFT : 11.0 Minutes # Remaining runtime left on battery as estimated by UPS
#MBATTCHG : 10 Percent # Min battery charge % (BCHARGE) required for system shutdown
#MINTIMEL : 4 Minutes # Min battery runtime (MINUTES) required for system shutdown
#MAXTIME : 0 Seconds # Max battery runtime (TIMEOUT) after which system is shutdown
#MAXLINEV : 227.5 Volts # Maximum input line voltage since apcupsd startup
#MINLINEV : 224.6 Volts # Minimum input line voltage since apcupsd startup
#OUTPUTV : 227.5 Volts # UPS output voltage
#SENSE : High # Current UPS sensitivity setting for voltage fluctuations
#DWAKE : 060 Seconds # Time UPS waits after power off when the power is restored
#DSHUTD : 600 Seconds # Delay before UPS powers down after command received
#DLOWBATT : 02 Minutes # Low battery signal sent when this much runtime remains
#LOTRANS : 208.0 Volts # Input line voltage below which UPS will switch to battery
#HITRANS : 253.0 Volts # Input line voltage above which UPS will switch to battery
#RETPCT : 015.0 Percent # Battery charge % required after power off to restore power
#ALARMDEL : 30 seconds # Delay period before UPS starts sounding alarm
#BATTV : 13.8 Volts # Current battery voltage
#LINEFREQ : 50.0 Hz # Current line frequency in Hertz
#LASTXFER : No transfers since turnon # Reason for last transfer to battery since apcupsd startup
#NUMXFERS : 0 # Number of transfers to battery since apcupsd startup
#TONBATT : 0 seconds # Seconds currently on battery
#CUMONBATT: 0 seconds # Cumulative seconds on battery since apcupsd startup
#XOFFBATT : N/A # Date, time of last transfer off battery since apcupsd startup
#SELFTEST : NO # Date and time of last self test since apcupsd startup
#STESTI : OFF # Self-test interval
#STATFLAG : 0x07000008 Status Flag # UPS status flag in hex
#REG1 : 0x00 Register 1 # Fault register 1 in hex
#REG2 : 0x00 Register 2 # Fault register 2 in hex
#REG3 : 0x00 Register 3 # Fault register 3 in hex
#MANDATE : 08/09/01 # UPS date of manufacture
#SERIALNO : NS0132263041 # UPS serial number
#BATTDATE : 11/01/08 # Date battery last replaced (if set)
#NOMOUTV : 230 Volts # Nominal output voltage to supply when on battery power
#NOMBATTV : 12.0 Volts # Nominal battery voltage
#FIRMWARE : 22.6.I # UPS firmware version
#APCMODEL : CWI # APC model information
#END APC : 2014-03-15 19:31:00 +0100 # Date and time of status information was written
package apps::apcupsd::local::plugin;
use strict;
use warnings;
use base qw(centreon::plugins::script_simple);
sub new {
my ($class, %options) = @_;
my $self = $class->SUPER::new(package => __PACKAGE__, %options);
bless $self, $class;
# $options->{options} = options object
$self->{version} = '0.1';
%{$self->{modes}} = (
'batterycharge' => 'apps::apcupsd::local::mode::batterycharge', # BCHARGE
'temperature' => 'apps::apcupsd::local::mode::temperature', # ITEMP
'timeleft' => 'apps::apcupsd::local::mode::timeleft', # TIMELEFT MAXTIME MINTIMEL
'linevoltage' => 'apps::apcupsd::local::mode::linevoltage', # LINEV
'batteryvoltage' => 'apps::apcupsd::local::mode::batteryvoltage', # BATTV
'outputvoltage' => 'apps::apcupsd::local::mode::outputvoltage', # OUTPUTV
'linefrequency' => 'apps::apcupsd::local::mode::linefrequency', # LINEFREQ
'loadpercentage' => 'apps::apcupsd::local::mode::loadpercentage', # LOADPCT
);
return $self;
}
1;
__END__
=head1 PLUGIN DESCRIPTION
Check apcupsd through local commands (the plugin can use SSH).
=cut