# # Copyright 2017 Centreon (http://www.centreon.com/) # # Centreon is a full-fledged industry-strength solution that meets # the needs in IT infrastructure and application monitoring for # service performance. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # package centreon::common::sun::snmp::mode::components::entity; use strict; use warnings; my %map_class = ( 1 => 'other', 2 => 'unknown', 3 => 'chassis', 4 => 'backplane', 5 => 'container', 6 => 'powerSupply', 7 => 'fan', 8 => 'sensor', 9 => 'module', 10 => 'port', 11 => 'stack', ); my %map_oper_state = (1 => 'disabled', 2 => 'enabled'); my %map_alarm = ( 1 => 'critical', 2 => 'major', 3 => 'minor', 4 => 'indeterminate', 5 => 'warning', 6 => 'pending', 7 => 'cleared' ); my %map_sensor_type = (1 => 'other', 2 => 'unknown', 3 => 'temperature', 4 => 'voltage', 5 => 'current', 6 => 'tachometer', 7 => 'counter', 8 => 'switch', 9 => 'lock', 10 => 'humidity', 11 => 'smokeDetection', 12 => 'presence', 13 => 'airFlow'); my %mapping_units = ( 1 => '', 2 => '', 3 => 'C', # Degrees C 4 => 'F', # Degrees F 5 => 'K', # Degrees K 6 => 'V', # Volts 7 => 'A', # Amps, 8 => 'W', # Watts 9 => 'Joules', 10 => 'Coulombs', 11 => 'VA', 12 => 'Nits', 13 => 'Lumens', 14 => 'Lux', 15 => 'Candelas', 16 => 'kPa', 17 => 'PSI', 18 => 'Newtons', 19 => 'CFM', 20 => 'rpm', 21 => 'Hz', # Hertz 22 => 'Seconds', 23 => 'Minutes', 24 => 'Hours', 25 => 'Days', 26 => 'Weeks', 27 => 'Mils', 28 => 'Inches', 29 => 'Feet', 30 => 'Cubic_Inches', 31 => 'Cubic_Feet', 32 => 'Meters', 33 => 'Cubic_Centimeters', 34 => 'Cubic_Meters', 35 => 'Liters', 36 => 'Fluid_Ounces', 37 => 'Radians', 38 => 'Steradians', 39 => 'Revolutions', 40 => 'Cycles', 41 => 'Gravities', 42 => 'Ounces', 43 => 'Pounds', 44 => 'Foot_Pounds', 45 => 'Ounce_Inches', 46 => 'Gauss', 47 => 'Gilberts', 48 => 'Henries', 49 => 'Farads', 50 => 'Ohms', 51 => 'Siemens', 52 => 'Moles', 53 => 'Becquerels', 54 => 'PPM', 55 => 'Decibels', 56 => 'DbA', 57 => 'DbC', 58 => 'Grays', 59 => 'Sieverts', 60 => 'Color_Temperature_Degrees_K', 61 => 'b', # bits 62 => 'B', # Bytes 63 => 'Words', 64 => 'DoubleWords', 65 => 'QuadWords', 66 => '%', # Percentage, 67 => 'Pascals', ); my $mapping = { entPhysicalClass => { oid => '.1.3.6.1.2.1.47.1.1.1.1.5', map => \%map_class }, entPhysicalName => { oid => '.1.3.6.1.2.1.47.1.1.1.1.7' }, sunPlatEquipmentOperationalState => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.2.1.2', map => \%map_oper_state }, sunPlatEquipmentAlarmStatus => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.2.1.3', map => \%map_alarm }, sunPlatSensorType => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.6.1.2', map => \%map_sensor_type }, sunPlatNumericSensorBaseUnits => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.8.1.1', map => \%mapping_units }, sunPlatNumericSensorExponent => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.8.1.2' }, sunPlatNumericSensorCurrent => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.8.1.4' }, }; my $oid_sunPlatEquipmentEntry = '.1.3.6.1.4.1.42.2.70.101.1.1.2.1'; my $oid_sunPlatNumericSensorEntry = '.1.3.6.1.4.1.42.2.70.101.1.1.8.1'; sub load { my ($self) = @_; push @{$self->{request}}, { oid => $mapping->{entPhysicalName}->{oid} }, { oid => $mapping->{entPhysicalClass}->{oid} }, { oid => $oid_sunPlatEquipmentEntry }, { oid => $oid_sunPlatNumericSensorEntry }, { oid => $mapping->{sunPlatSensorType}->{oid} }; } sub check { my ($self) = @_; $self->{output}->output_add(long_msg => "Checking entities"); $self->{components}->{entity} = {name => 'entity', total => 0, skip => 0}; return if ($self->check_filter(section => 'entity')); my ($exit, $warn, $crit, $checked); foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}})) { next if ($oid !~ /^$mapping->{entPhysicalName}->{oid}\.(.*)$/); my $instance = $1; my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}, instance => $instance); next if ($self->check_filter(section => 'entity', instance => $result->{entPhysicalClass} . '.' . $instance)); next if ($result->{sunPlatEquipmentOperationalState} eq 'disabled'); if (defined($result->{sunPlatNumericSensorCurrent})) { $result->{sunPlatNumericSensorCurrent} *= 10 ** $result->{sunPlatNumericSensorExponent} } $self->{components}->{entity}->{total}++; $self->{output}->output_add(long_msg => sprintf("%s '%s' status is '%s' [instance = %s, value = %s]", $result->{entPhysicalClass}, $result->{entPhysicalName}, $result->{sunPlatEquipmentAlarmStatus}, $result->{entPhysicalClass} . '.' . $instance, defined($result->{sunPlatNumericSensorCurrent}) ? $result->{sunPlatNumericSensorCurrent} : '-')); $exit = $self->get_severity(label => 'default', section => 'entity', instance => $result->{entPhysicalClass} . '.' . $instance, value => $result->{sunPlatEquipmentAlarmStatus}); if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { $self->{output}->output_add(severity => $exit, short_msg => sprintf("%s '%s' status is '%s'", $result->{entPhysicalClass}, $result->{entPhysicalName}, $result->{sunPlatEquipmentAlarmStatus})); } next if (!defined($result->{sunPlatNumericSensorCurrent})); ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => $result->{sunPlatSensorType}, instance => $result->{entPhysicalClass} . '.' . $instance,, value => $result->{sunPlatNumericSensorCurrent}); if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { $self->{output}->output_add(severity => $exit, short_msg => sprintf("%s '%s' is '%s' %s", $result->{sunPlatSensorType}, $result->{entPhysicalName}, $result->{sunPlatNumericSensorCurrent}, $result->{sunPlatNumericSensorBaseUnits})); } $self->{output}->perfdata_add(label => $result->{sunPlatSensorType} . '_' . $result->{entPhysicalName},, unit => $result->{sunPlatNumericSensorBaseUnits}, value => $result->{sunPlatNumericSensorCurrent}, warning => $warn, critical => $crit ); } } 1;