# # Copyright 2017 Centreon (http://www.centreon.com/) # # Centreon is a full-fledged industry-strength solution that meets # the needs in IT infrastructure and application monitoring for # service performance. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # package network::alcatel::isam::snmp::mode::components::sfp; use strict; use warnings; use network::alcatel::isam::snmp::mode::components::resources qw($mapping_slot); my %map_los = (1 => 'los', 2 => 'noLos', 3 => 'notAvailable'); my $mapping = { sfpDiagLOS => { oid => '.1.3.6.1.4.1.637.61.1.56.5.1.4', map => \%map_los }, sfpDiagTxPower => { oid => '.1.3.6.1.4.1.637.61.1.56.5.1.6' }, sfpDiagRxPower => { oid => '.1.3.6.1.4.1.637.61.1.56.5.1.7' }, sfpDiagTxBiasCurrent => { oid => '.1.3.6.1.4.1.637.61.1.56.5.1.8' }, sfpDiagSupplyVoltage => { oid => '.1.3.6.1.4.1.637.61.1.56.5.1.9' }, sfpDiagTemperature => { oid => '.1.3.6.1.4.1.637.61.1.56.5.1.10' }, }; my $oid_sfpDiagEntry = '.1.3.6.1.4.1.637.61.1.56.5.1'; sub load { my ($self) = @_; foreach (keys %$mapping) { push @{$self->{request}}, { oid => $mapping->{$_}->{oid} }; } } sub check { my ($self) = @_; $self->{output}->output_add(long_msg => "Checking sfp"); $self->{components}->{sfp} = {name => 'sfp', total => 0, skip => 0}; return if ($self->check_filter(section => 'sfp')); my $results = {}; foreach (keys %$mapping) { $results = { %$results, %{$self->{results}->{$mapping->{$_}->{oid}}} }; } my ($exit, $warn, $crit, $checked); foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$mapping->{sfpDiagLOS}->{oid}}})) { $oid =~ /^$mapping->{sfpDiagLOS}->{oid}\.(.*?)\.(.*?)$/; my ($slot_id, $sfp_faceplate_num) = ($1, $2); my $result = $self->{snmp}->map_instance(mapping => $mapping_slot, results => { %{$self->{results}->{$mapping_slot->{eqptSlotActualType}->{oid}}}, %{$self->{results}->{$mapping_slot->{eqptBoardInventorySerialNumber}->{oid}}} }, instance => $slot_id); my $result2 = $self->{snmp}->map_instance(mapping => $mapping, results => $results, instance => $slot_id . '.' . $sfp_faceplate_num); next if ($self->check_filter(section => 'sfp', instance => $slot_id . '.' . $sfp_faceplate_num)); my $name = $result->{eqptSlotActualType} . '/' . $result->{eqptBoardInventorySerialNumber} . '/' . $sfp_faceplate_num; $self->{components}->{sfp}->{total}++; $self->{output}->output_add(long_msg => sprintf("sfp '%s' signal status is '%s' [instance = %s]", $name, $result2->{sfpDiagLOS}, $slot_id . '.' . $sfp_faceplate_num)); $exit = $self->get_severity(section => 'sfp', instance => $slot_id . '.' . $sfp_faceplate_num, value => $result2->{sfpDiagLOS}); if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { $self->{output}->output_add(severity => $exit, short_msg => sprintf("sfp '%s' signal status is '%s'", $name, $result2->{sfpDiagLOS})); } if ($result2->{sfpDiagSupplyVoltage} =~ /(\S+)\s+VDC/i) { my $value = $1; ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'sfp.voltage', instance => $slot_id . '.' . $sfp_faceplate_num, value => $value); if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { $self->{output}->output_add(severity => $exit, short_msg => sprintf("Sfp '%s' voltage is %s VDC", $name, $value)); } $self->{output}->perfdata_add(label => 'sfp_voltage_' . $name, unit => 'VDC', value => $value, warning => $warn, critical => $crit ); } if ($result2->{sfpDiagTemperature} =~ /(\S+)\s+degrees Celsius/i) { my $value = $1; ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'sfp.temperature', instance => $slot_id . '.' . $sfp_faceplate_num, value => $value); if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { $self->{output}->output_add(severity => $exit, short_msg => sprintf("Sfp '%s' temperature is %s C", $name, $value)); } $self->{output}->perfdata_add(label => 'sfp_temperature_' . $name, unit => 'C', value => $value, warning => $warn, critical => $crit ); } if ($result2->{sfpDiagTxPower} =~ /(\S+)\s+dBm/i) { my $value = $1; ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'sfp.txpower', instance => $slot_id . '.' . $sfp_faceplate_num, value => $value); if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { $self->{output}->output_add(severity => $exit, short_msg => sprintf("Sfp '%s' tx power is %s dBm", $name, $value)); } $self->{output}->perfdata_add(label => 'sfp_txpower_' . $name, unit => 'dBm', value => $value, warning => $warn, critical => $crit ); } if ($result2->{sfpDiagRxPower} =~ /(\S+)\s+dBm/i) { my $value = $1; ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'sfp.rxpower', instance => $slot_id . '.' . $sfp_faceplate_num, value => $value); if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { $self->{output}->output_add(severity => $exit, short_msg => sprintf("Sfp '%s' rx power is %s dBm", $name, $value)); } $self->{output}->perfdata_add(label => 'sfp_rxpower_' . $name, unit => 'dBm', value => $value, warning => $warn, critical => $crit ); } if ($result2->{sfpDiagTxBiasCurrent} =~ /(\S+)\s+mA/i) { my $value = $1; ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'sfp.current', instance => $slot_id . '.' . $sfp_faceplate_num, value => $value); if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) { $self->{output}->output_add(severity => $exit, short_msg => sprintf("Sfp '%s' current is %s mA", $name, $value)); } $self->{output}->perfdata_add(label => 'sfp_current_' . $name, unit => 'mA', value => $value, warning => $warn, critical => $crit ); } } } 1;