#
# Copyright 2020 Centreon (http://www.centreon.com/)
#
# Centreon is a full-fledged industry-strength solution that meets
# the needs in IT infrastructure and application monitoring for
# service performance.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

package hardware::ups::apc::snmp::mode::inputlines;

use base qw(centreon::plugins::templates::counter);

use strict;
use warnings;
use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold catalog_status_calc);

sub custom_status_output {
    my ($self, %options) = @_;

    return sprintf("last input line fail cause is '%s'", $self->{result_values}->{last_cause});
}

sub set_counters {
    my ($self, %options) = @_;

    $self->{maps_counters_type} = [
        { name => 'global', type => 0 },
    ];

    $self->{maps_counters}->{global} = [
        { label => 'voltage', set => {
                key_values => [ { name => 'voltage' } ],
                output_template => 'voltage: %s V',
                perfdatas => [
                    { label => 'voltage', value => 'voltage', template => '%s', 
                      unit => 'V' },
                ],
            }
        },
        { label => 'frequence', set => {
                key_values => [ { name => 'frequency' } ],
                output_template => 'frequence: %s Hz',
                perfdatas => [
                    { label => 'frequence', value => 'frequency', template => '%s', 
                      unit => 'Hz' },
                ],
            }
        },
        { label => 'status', threshold => 0, set => {
                key_values => [ { name => 'last_cause' } ],
                closure_custom_calc => \&catalog_status_calc,
                closure_custom_output => $self->can('custom_status_output'),
                closure_custom_perfdata => sub { return 0; },
                closure_custom_threshold_check => \&catalog_status_threshold,
            }
        },
    ];
}

sub new {
    my ($class, %options) = @_;
    my $self = $class->SUPER::new(package => __PACKAGE__, %options);
    bless $self, $class;

    $options{options}->add_options(arguments => {
        'warning-status:s'  => { name => 'warning_status', default => '' },
        'critical-status:s' => { name => 'critical_status', default => '' },
    });

    return $self;
}

sub check_options {
    my ($self, %options) = @_;
    $self->SUPER::check_options(%options);

    $self->change_macros(macros => ['warning_status', 'critical_status']);
}

my $map_status = {
    1 => 'noTransfer', 2 => 'highLineVoltage', 3 => 'brownout', 4 => 'blackout',
    5 => 'smallMomentarySag', 6 => 'deepMomentarySag', 7 => 'smallMomentarySpike',
    8 => 'largeMomentarySpike', 9 => 'selfTest', 10 => 'rateOfVoltageChange',
};

my $mapping = {
    upsAdvInputLineVoltage       => { oid => '.1.3.6.1.4.1.318.1.1.1.3.2.1' },
    upsAdvInputFrequency         => { oid => '.1.3.6.1.4.1.318.1.1.1.3.2.4' },
    upsAdvInputLineFailCause     => { oid => '.1.3.6.1.4.1.318.1.1.1.3.2.5', map => $map_status },
    upsAdvConfigHighTransferVolt => { oid => '.1.3.6.1.4.1.318.1.1.1.5.2.2' },
    upsAdvConfigLowTransferVolt  => { oid => '.1.3.6.1.4.1.318.1.1.1.5.2.3' },
    upsHighPrecInputLineVoltage  => { oid => '.1.3.6.1.4.1.318.1.1.1.3.3.1' },
    upsHighPrecInputFrequency    => { oid => '.1.3.6.1.4.1.318.1.1.1.3.3.4' },
};

sub manage_selection {
    my ($self, %options) = @_;

    my $snmp_result = $options{snmp}->get_leef(
        oids => [ map($_->{oid} . '.0', values(%$mapping)) ],
        nothing_quit => 1
    );

    my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => '0');
    if ((!defined($self->{option_results}->{'warning-voltage'}) || $self->{option_results}->{'warning-voltage'} eq '') &&
        (!defined($self->{option_results}->{'critical-voltage'}) || $self->{option_results}->{'critical-voltage'} eq '')
    ) {
        my $th = '';
        $th .= $result->{upsAdvConfigHighTransferVolt} if (defined($result->{upsAdvConfigHighTransferVolt}) && $result->{upsAdvConfigHighTransferVolt} =~ /\d+/);
        $th = $result->{upsAdvConfigLowTransferVolt} . ':' . $th if (defined($result->{upsAdvConfigLowTransferVolt}) && $result->{upsAdvConfigLowTransferVolt} =~ /\d+/);
        $self->{perfdata}->threshold_validate(label => 'critical-voltage', value => $th) if ($th ne '');
    }

    $self->{global} = {
        last_cause => $result->{upsAdvInputLineFailCause},
        voltage => defined($result->{upsHighPrecInputLineVoltage}) && $result->{upsHighPrecInputLineVoltage} =~ /\d/ ?
            $result->{upsHighPrecInputLineVoltage} * 0.1 : $result->{upsAdvInputLineVoltage},
        frequency => defined($result->{upsHighPrecInputFrequency}) && $result->{upsHighPrecInputFrequency} =~ /\d/ ?
            $result->{upsHighPrecInputFrequency} * 0.1 : $result->{upsAdvInputFrequency},
    };
}

1;

__END__

=head1 MODE

Check input lines.

=over 8

=item B<--filter-counters>

Only display some counters (regexp can be used).
Example: --filter-counters='^frequence|voltage$'

=item B<--warning-status>

Set warning threshold for status (Default: '').
Can used special variables like: %{last_cause}

=item B<--critical-status>

Set critical threshold for status (Default: '').
Can used special variables like: %{last_cause}

=item B<--warning-*> B<--critical-*>

Thresholds.
Can be: 'voltage', 'frequence'.

=back

=cut