# # Copyright 2020 Centreon (http://www.centreon.com/) # # Centreon is a full-fledged industry-strength solution that meets # the needs in IT infrastructure and application monitoring for # service performance. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # package centreon::common::cisco::standard::snmp::mode::cpu; use base qw(centreon::plugins::templates::counter); use strict; use warnings; sub set_counters { my ($self, %options) = @_; $self->{maps_counters_type} = [ { name => 'cpu_avg', type => 0, cb_prefix_output => 'prefix_cpu_avg_output', message_separator => ' ', skipped_code => { -10 => 1 } }, { name => 'cpu_core', type => 1, cb_prefix_output => 'prefix_cpu_core_output', message_separator => ' ', message_multiple => 'All core cpu are ok', skipped_code => { -10 => 1 } } ]; $self->{maps_counters}->{cpu_avg} = [ { label => 'average-5s', nlabel => 'cpu.utilization.5s.percentage', set => { key_values => [ { name => 'average_5s' } ], output_template => '%.2f %% (5s)', perfdatas => [ { label => 'total_cpu_5s_avg', value => 'average_5s', template => '%.2f', min => 0, max => 100, unit => '%' }, ], } }, { label => 'average-1m', nlabel => 'cpu.utilization.1m.percentage', set => { key_values => [ { name => 'average_1m' } ], output_template => '%.2f %% (1m)', perfdatas => [ { label => 'total_cpu_1m_avg', value => 'average_1m', template => '%.2f', min => 0, max => 100, unit => '%' }, ], } }, { label => 'average-5m', nlabel => 'cpu.utilization.5m.percentage', set => { key_values => [ { name => 'average_5m' } ], output_template => '%.2f %% (5m)', perfdatas => [ { label => 'total_cpu_5m_avg', value => 'average_5m', template => '%.2f', min => 0, max => 100, unit => '%' }, ], } }, ]; $self->{maps_counters}->{cpu_core} = [ { label => 'core-5s', nlabel => 'core.cpu.utilization.5s.percentage', set => { key_values => [ { name => 'cpu_5s' }, { name => 'display' } ], output_template => '%.2f %% (5s)', perfdatas => [ { label => 'cpu_5s', value => 'cpu_5s', template => '%.2f', min => 0, max => 100, unit => '%', label_extra_instance => 1, instance_use => 'display' }, ], } }, { label => 'core-1m', nlabel => 'core.cpu.utilization.1m.percentage', set => { key_values => [ { name => 'cpu_1m' }, { name => 'display' } ], output_template => '%.2f %% (1m)', perfdatas => [ { label => 'cpu_1m', value => 'cpu_1m', template => '%.2f', min => 0, max => 100, unit => '%', label_extra_instance => 1, instance_use => 'display' }, ], } }, { label => 'core-5m', nlabel => 'core.cpu.utilization.5m.percentage', set => { key_values => [ { name => 'cpu_5m' }, { name => 'display' } ], output_template => '%.2f %% (5m)', perfdatas => [ { label => 'cpu_5m', value => 'cpu_5m', template => '%.2f', min => 0, max => 100, unit => '%', label_extra_instance => 1, instance_use => 'display' }, ], } }, ]; } sub prefix_cpu_avg_output { my ($self, %options) = @_; return $self->{cpu_avg}->{count} . " CPU(s) average usage is "; } sub prefix_cpu_core_output { my ($self, %options) = @_; return "CPU '" . $options{instance_value}->{display} . "' usage "; } sub new { my ($class, %options) = @_; my $self = $class->SUPER::new(package => __PACKAGE__, %options); bless $self, $class; $options{options}->add_options(arguments => { 'check-order:s' => { name => 'check_order', default => 'process,old_sys,system_ext' }, }); return $self; } sub check_nexus_cpu { my ($self, %options) = @_; return if (!defined($options{snmp_result}->{$options{oid} . '.0'})); my $instance = 0; $self->{cpu_core}->{$instance} = { display => $instance, cpu_5m => $options{snmp_result}->{$options{oid} . '.0'}, }; $self->{checked_cpu} = 1; } sub check_table_cpu { my ($self, %options) = @_; return if ($self->{checked_cpu} == 1); my $instances = {}; foreach my $oid (keys %{$options{snmp_result}}) { $oid =~ /\.([0-9]+)$/; next if (defined($instances->{$1})); $instances->{$1} = 1; my $instance = $1; my $cpu5sec = defined($options{snmp_result}->{$options{sec5} . '.' . $instance}) ? $options{snmp_result}->{$options{sec5} . '.' . $instance} : undef; my $cpu1min = defined($options{snmp_result}->{$options{min1} . '.' . $instance}) ? $options{snmp_result}->{$options{min1} . '.' . $instance} : undef; my $cpu5min = defined($options{snmp_result}->{$options{min5} . '.' . $instance}) ? $options{snmp_result}->{$options{min5} . '.' . $instance} : undef; # Case that it's maybe other CPU oid in table for datas. next if (!defined($cpu5sec) && !defined($cpu1min) && !defined($cpu5min)); $self->{checked_cpu} = 1; $self->{cpu_core}->{$instance} = { display => $instance, cpu_5s => $cpu5sec, cpu_1m => $cpu1min, cpu_5m => $cpu5min, }; } } sub check_cpu_average { my ($self, %options) = @_; my $count = scalar(keys %{$self->{cpu_core}}); my ($avg_5s, $avg_1m, $avg_5m); foreach (values %{$self->{cpu_core}}) { $avg_5s = defined($avg_5s) ? $avg_5s + $_->{cpu_5s} : $_->{cpu_5s} if (defined($_->{cpu_5s})); $avg_1m = defined($avg_1m) ? $avg_1m + $_->{cpu_1m} : $_->{cpu_1m} if (defined($_->{cpu_1m})); $avg_5m = defined($avg_5m) ? $avg_5m + $_->{cpu_5m} : $_->{cpu_5m} if (defined($_->{cpu_5m})); } $self->{cpu_avg} = { average_5s => defined($avg_5s) ? $avg_5s / $count : undef, average_1m => defined($avg_1m) ? $avg_1m / $count : undef, average_5m => defined($avg_5m) ? $avg_5m / $count : undef, count => $count, }; } sub check_cpu_process { my ($self, %options) = @_; return if ($self->{checked_cpu} == 1); # Cisco IOS Software releases later to 12.0(3)T and prior to 12.2(3.5) my $oid_cpmCPUTotalEntry = '.1.3.6.1.4.1.9.9.109.1.1.1.1'; my $oid_cpmCPUTotal5sec = '.1.3.6.1.4.1.9.9.109.1.1.1.1.3'; my $oid_cpmCPUTotal1min = '.1.3.6.1.4.1.9.9.109.1.1.1.1.4'; my $oid_cpmCPUTotal5min = '.1.3.6.1.4.1.9.9.109.1.1.1.1.5'; # Cisco IOS Software releases 12.2(3.5) or later my $oid_cpmCPUTotal5minRev = '.1.3.6.1.4.1.9.9.109.1.1.1.1.8'; my $oid_cpmCPUTotal1minRev = '.1.3.6.1.4.1.9.9.109.1.1.1.1.7'; my $oid_cpmCPUTotal5secRev = '.1.3.6.1.4.1.9.9.109.1.1.1.1.6'; my $snmp_result = $self->{snmp}->get_table( oid => $oid_cpmCPUTotalEntry, start => $oid_cpmCPUTotal5sec, end => $oid_cpmCPUTotal5minRev ); $self->check_table_cpu(snmp_result => $snmp_result, sec5 => $oid_cpmCPUTotal5secRev, min1 => $oid_cpmCPUTotal1minRev, min5 => $oid_cpmCPUTotal5minRev); $self->check_table_cpu(snmp_result => $snmp_result, sec5 => $oid_cpmCPUTotal5sec, min1 => $oid_cpmCPUTotal1min, min5 => $oid_cpmCPUTotal5min); } sub check_cpu_old_sys { my ($self, %options) = @_; return if ($self->{checked_cpu} == 1); # Cisco IOS Software releases prior to 12.0(3)T my $oid_lcpu = '.1.3.6.1.4.1.9.2.1'; my $oid_busyPer = '.1.3.6.1.4.1.9.2.1.56'; # .0 in reality my $oid_avgBusy1 = '.1.3.6.1.4.1.9.2.1.57'; # .0 in reality my $oid_avgBusy5 = '.1.3.6.1.4.1.9.2.1.58'; # .0 in reality my $snmp_result = $self->{snmp}->get_table( oid => $oid_lcpu, start => $oid_busyPer, end => $oid_avgBusy5 ); $self->check_table_cpu(snmp_result => $snmp_result, sec5 => $oid_busyPer, min1 => $oid_avgBusy1, min5 => $oid_avgBusy5); } sub check_cpu_system_ext { my ($self, %options) = @_; return if ($self->{checked_cpu} == 1); # Cisco Nexus my $oid_cseSysCPUUtilization = '.1.3.6.1.4.1.9.9.305.1.1.1'; # .0 in reality my $snmp_result = $self->{snmp}->get_table( oid => $oid_cseSysCPUUtilization ); $self->check_nexus_cpu(snmp_result => $snmp_result, oid => $oid_cseSysCPUUtilization); } sub manage_selection { my ($self, %options) = @_; $self->{snmp} = $options{snmp}; $self->{cpu_avg} = {}; $self->{cpu_core} = {}; $self->{checked_cpu} = 0; foreach (split /,/, $self->{option_results}->{check_order}) { my $method = $self->can('check_cpu_' . $_); if ($method) { $self->$method(); } } if ($self->{checked_cpu} == 0) { $self->{output}->add_option_msg(short_msg => "Cannot find CPU informations"); $self->{output}->option_exit(); } $self->check_cpu_average(); } 1; __END__ =head1 MODE Check cpu usage (CISCO-PROCESS-MIB and CISCO-SYSTEM-EXT-MIB). =over 8 =item B<--check-order> Check cpu in standard cisco mib. If you have some issue (wrong cpu information in a specific mib), you can change the order (Default: 'process,old_sys,system_ext'). =item B<--warning-*> B<--critical-*> Thresholds. Can be: 'core-5s', 'core-1m', 'core-5m', 'average-5s', 'average-1m', 'average-5m'. =back =cut