#
# Copyright 2021 Centreon (http://www.centreon.com/)
#
# Centreon is a full-fledged industry-strength solution that meets
# the needs in IT infrastructure and application monitoring for
# service performance.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

package network::extreme::snmp::mode::interfaces;

use base qw(snmp_standard::mode::interfaces);

use strict;
use warnings;

sub set_oids_errors {
    my ($self, %options) = @_;

    $self->SUPER::set_oids_errors(%options);
    $self->{oid_ifOutCongDropPkts} = '.1.3.6.1.4.1.1916.1.4.14.1.1'; # extremePortCongDropPkts
}

sub set_counters_errors {
    my ($self, %options) = @_;

    $self->SUPER::set_counters_errors(%options);
    
    push @{$self->{maps_counters}->{int}}, 
        { label => 'out-congdropped', filter => 'add_errors', nlabel => 'interface.packets.out.congestion.dropped.count', set => {
                key_values => [ { name => 'outcongdropped', diff => 1 }, { name => 'total_out_packets', diff => 1 }, { name => 'display' }, { name => 'mode_cast' } ],
                closure_custom_calc => $self->can('custom_errors_calc'), closure_custom_calc_extra_options => { label_ref1 => 'out', label_ref2 => 'congdropped' },
                closure_custom_output => $self->can('custom_errors_output'), output_error_template => 'Packets Out Congestion Dropped : %s',
                closure_custom_perfdata => $self->can('custom_errors_perfdata'),
                closure_custom_threshold_check => $self->can('custom_errors_threshold')
            }
        }
    ;
}

sub load_errors {
    my ($self, %options) = @_;

    $self->set_oids_errors();
    $self->{snmp}->load(
        oids => [
            $self->{oid_ifInDiscards}, $self->{oid_ifInErrors},
            $self->{oid_ifOutDiscards}, $self->{oid_ifOutErrors},
            $self->{oid_ifOutCongDropPkts}
        ],
        instances => $self->{array_interface_selected}
    );
}

sub add_result_errors {
    my ($self, %options) = @_;
    
    $self->{int}->{$options{instance}}->{indiscard} = $self->{results}->{ $self->{oid_ifInDiscards} . '.' . $options{instance} };
    $self->{int}->{$options{instance}}->{inerror} = $self->{results}->{ $self->{oid_ifInErrors} . '.' . $options{instance} };
    $self->{int}->{$options{instance}}->{outdiscard} = $self->{results}->{ $self->{oid_ifOutDiscards} . '.' . $options{instance} };
    $self->{int}->{$options{instance}}->{outerror} = $self->{results}->{ $self->{oid_ifOutErrors} . '.' . $options{instance} };
    $self->{int}->{$options{instance}}->{outcongdropped} = $self->{results}->{ $self->{oid_ifOutCongDropPkts} . '.' . $options{instance} };
}

1;

__END__

=head1 MODE

Check interfaces.

=over 8

=item B<--add-global>

Check global port statistics (By default if no --add-* option is set).

=item B<--add-status>

Check interface status.

=item B<--add-duplex-status>

Check duplex status (with --warning-status and --critical-status).

=item B<--add-traffic>

Check interface traffic.

=item B<--add-errors>

Check interface errors.

=item B<--add-cast>

Check interface cast.

=item B<--add-speed>

Check interface speed.

=item B<--add-volume>

Check interface data volume between two checks (not supposed to be graphed, useful for BI reporting).

=item B<--warning-status>

Set warning threshold for status.
Can used special variables like: %{admstatus}, %{opstatus}, %{duplexstatus}, %{display}

=item B<--critical-status>

Set critical threshold for status (Default: '%{admstatus} eq "up" and %{opstatus} ne "up"').
Can used special variables like: %{admstatus}, %{opstatus}, %{duplexstatus}, %{display}

=item B<--warning-*> B<--critical-*>

Thresholds.
Can be: 'total-port', 'total-admin-up', 'total-admin-down', 'total-oper-up', 'total-oper-down',
'in-traffic', 'out-traffic', 'in-error', 'in-discard', 'out-congdropped', 'out-error', 'out-discard',
'in-ucast', 'in-bcast', 'in-mcast', 'out-ucast', 'out-bcast', 'out-mcast',
'speed' (b/s).

=item B<--units-traffic>

Units of thresholds for the traffic (Default: 'percent_delta') ('percent_delta', 'bps', 'counter').

=item B<--units-errors>

Units of thresholds for errors/discards (Default: 'percent_delta') ('percent_delta', 'percent', 'delta', 'counter').

=item B<--units-cast>

Units of thresholds for communication types (Default: 'percent_delta') ('percent_delta', 'percent', 'delta', 'counter').

=item B<--nagvis-perfdata>

Display traffic perfdata to be compatible with nagvis widget.

=item B<--interface>

Set the interface (number expected) ex: 1,2,... (empty means 'check all interface').

=item B<--name>

Allows to use interface name with option --interface instead of interface oid index (Can be a regexp)

=item B<--speed>

Set interface speed for incoming/outgoing traffic (in Mb).

=item B<--speed-in>

Set interface speed for incoming traffic (in Mb).

=item B<--speed-out>

Set interface speed for outgoing traffic (in Mb).

=item B<--force-counters32>

Force to use 32 bits counters (even in snmp v2c and v3). Should be used when 64 bits counters are buggy.

=item B<--reload-cache-time>

Time in minutes before reloading cache file (default: 180).

=item B<--oid-filter>

Choose OID used to filter interface (default: ifName) (values: ifDesc, ifAlias, ifName, IpAddr).

=item B<--oid-display>

Choose OID used to display interface (default: ifName) (values: ifDesc, ifAlias, ifName, IpAddr).

=item B<--oid-extra-display>

Add an OID to display.

=item B<--display-transform-src>

Regexp src to transform display value.

=item B<--display-transform-dst>

Regexp dst to transform display value.

=item B<--show-cache>

Display cache interface datas.

=back

=cut