# # Copyright 2021 Centreon (http://www.centreon.com/) # # Centreon is a full-fledged industry-strength solution that meets # the needs in IT infrastructure and application monitoring for # service performance. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # package hardware::ups::apc::snmp::mode::outputlines; use base qw(centreon::plugins::templates::counter); use strict; use warnings; use centreon::plugins::templates::catalog_functions qw(catalog_status_threshold catalog_status_calc); sub custom_status_output { my ($self, %options) = @_; return sprintf("output status is '%s'", $self->{result_values}->{status}); } sub set_counters { my ($self, %options) = @_; $self->{maps_counters_type} = [ { name => 'global', type => 0, skipped_code => { -10 => 1 } }, ]; $self->{maps_counters}->{global} = [ { label => 'status', threshold => 0, set => { key_values => [ { name => 'status' } ], closure_custom_calc => \&catalog_status_calc, closure_custom_output => $self->can('custom_status_output'), closure_custom_perfdata => sub { return 0; }, closure_custom_threshold_check => \&catalog_status_threshold, } }, { label => 'load', set => { key_values => [ { name => 'load' } ], output_template => 'load: %s %%', perfdatas => [ { label => 'load', value => 'load', template => '%s', min => 0, max => 100, unit => '%' }, ], } }, { label => 'current', set => { key_values => [ { name => 'current' } ], output_template => 'current: %s A', perfdatas => [ { label => 'current', value => 'current', template => '%s', min => 0, unit => 'A' }, ], } }, { label => 'voltage', set => { key_values => [ { name => 'voltage' } ], output_template => 'voltage: %s V', perfdatas => [ { label => 'voltage', value => 'voltage', template => '%s', unit => 'V' }, ], } }, { label => 'frequence', set => { key_values => [ { name => 'frequency' } ], output_template => 'frequence: %s Hz', perfdatas => [ { label => 'frequence', value => 'frequency', template => '%s', unit => 'Hz' }, ], } }, ]; } sub new { my ($class, %options) = @_; my $self = $class->SUPER::new(package => __PACKAGE__, %options); bless $self, $class; $options{options}->add_options(arguments => { 'unknown-status:s' => { name => 'unknown_status', default => '%{status} =~ /unknown/i' }, 'warning-status:s' => { name => 'warning_status', default => '' }, 'critical-status:s' => { name => 'critical_status', default => '%{status} !~ /onLine|rebooting/i' }, }); return $self; } sub check_options { my ($self, %options) = @_; $self->SUPER::check_options(%options); $self->change_macros(macros => ['warning_status', 'critical_status', 'unknown_status']); } my $map_status = { 1 => 'unknown', 2 => 'onLine', 3 => 'onBattery', 4 => 'onSmartBoost', 5 => 'timedSleeping', 6 => 'softwareBypass', 7 => 'off', 8 => 'rebooting', 9 => 'switchedBypass', 10 => 'hardwareFailureBypass', 11 => 'sleepingUntilPowerReturn', 12 => 'onSmartTrim', }; my $mapping = { upsBasicOutputStatus => { oid => '.1.3.6.1.4.1.318.1.1.1.4.1.1', map => $map_status }, upsAdvOutputVoltage => { oid => '.1.3.6.1.4.1.318.1.1.1.4.2.1' }, upsAdvOutputFrequency => { oid => '.1.3.6.1.4.1.318.1.1.1.4.2.2' }, upsAdvOutputLoad => { oid => '.1.3.6.1.4.1.318.1.1.1.4.2.3' }, upsAdvOutputCurrent => { oid => '.1.3.6.1.4.1.318.1.1.1.4.2.4' }, upsHighPrecOutputVoltage => { oid => '.1.3.6.1.4.1.318.1.1.1.4.3.1' }, # tenths of VAC upsHighPrecOutputFrequency => { oid => '.1.3.6.1.4.1.318.1.1.1.4.3.2' }, # tenths of Hz upsHighPrecOutputLoad => { oid => '.1.3.6.1.4.1.318.1.1.1.4.3.3' }, # tenths of percent upsHighPrecOutputCurrent => { oid => '.1.3.6.1.4.1.318.1.1.1.4.3.4' }, # tenths of amperes }; sub manage_selection { my ($self, %options) = @_; my $snmp_result = $options{snmp}->get_leef( oids => [ map($_->{oid} . '.0', values(%$mapping)) ], nothing_quit => 1 ); my $result = $options{snmp}->map_instance(mapping => $mapping, results => $snmp_result, instance => '0'); $self->{global} = { status => $result->{upsBasicOutputStatus}, voltage => defined($result->{upsHighPrecOutputVoltage}) && $result->{upsHighPrecOutputVoltage} =~ /\d/ ? $result->{upsHighPrecOutputVoltage} * 0.1 : $result->{upsAdvOutputVoltage}, frequency => defined($result->{upsHighPrecOutputFrequency}) && $result->{upsHighPrecOutputFrequency} =~ /\d/ ? $result->{upsHighPrecOutputFrequency} * 0.1 : $result->{upsAdvOutputFrequency}, load => defined($result->{upsHighPrecOutputLoad}) && $result->{upsHighPrecOutputLoad} =~ /\d/ ? $result->{upsHighPrecOutputLoad} * 0.1 : $result->{upsAdvOutputLoad}, current => defined($result->{upsHighPrecOutputCurrent}) && $result->{upsHighPrecOutputCurrent} =~ /\d/ ? $result->{upsHighPrecOutputCurrent} * 0.1 : $result->{upsAdvOutputCurrent}, }; } 1; __END__ =head1 MODE Check output lines. =over 8 =item B<--filter-counters> Only display some counters (regexp can be used). Example: --filter-counters='^status|load$' =item B<--unknown-status> Set unknown threshold for status (Default: '%{status} =~ /unknown/i'). Can used special variables like: %{status} =item B<--warning-status> Set warning threshold for status (Default: ''). Can used special variables like: %{status} =item B<--critical-status> Set critical threshold for status (Default: '%{status} !~ /onLine|rebooting/i'). Can used special variables like: %{status} =item B<--warning-*> B<--critical-*> Thresholds. Can be: 'load', 'voltage', 'current', 'frequence'. =back =cut