127 lines
8.0 KiB
Perl
127 lines
8.0 KiB
Perl
#
|
|
# Copyright 2019 Centreon (http://www.centreon.com/)
|
|
#
|
|
# Centreon is a full-fledged industry-strength solution that meets
|
|
# the needs in IT infrastructure and application monitoring for
|
|
# service performance.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
|
|
package hardware::server::dell::idrac::snmp::mode::components::amperage;
|
|
|
|
use strict;
|
|
use warnings;
|
|
use hardware::server::dell::idrac::snmp::mode::components::resources qw(%map_probe_status %map_state %map_amperage_type);
|
|
|
|
my $mapping = {
|
|
amperageProbeStateSettings => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.4', map => \%map_state },
|
|
amperageProbeStatus => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.5', map => \%map_probe_status },
|
|
amperageProbeReading => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.6' },
|
|
amperageProbeType => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.7', map => \%map_amperage_type },
|
|
amperageProbeLocationName => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.8' },
|
|
amperageProbeUpperCriticalThreshold => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.10' },
|
|
amperageProbeUpperNonCriticalThreshold => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.11' },
|
|
amperageProbeLowerNonCriticalThreshold => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.12' },
|
|
amperageProbeLowerCriticalThreshold => { oid => '.1.3.6.1.4.1.674.10892.5.4.600.30.1.13' },
|
|
};
|
|
my $oid_amperageProbeTableEntry = '.1.3.6.1.4.1.674.10892.5.4.600.30.1';
|
|
|
|
sub load {
|
|
my ($self) = @_;
|
|
|
|
push @{$self->{request}}, { oid => $oid_amperageProbeTableEntry };
|
|
}
|
|
|
|
sub check {
|
|
my ($self) = @_;
|
|
|
|
$self->{output}->output_add(long_msg => "Checking amperages");
|
|
$self->{components}->{amperage} = {name => 'amperages', total => 0, skip => 0};
|
|
return if ($self->check_filter(section => 'amperage'));
|
|
|
|
foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_amperageProbeTableEntry}})) {
|
|
next if ($oid !~ /^$mapping->{amperageProbeStatus}->{oid}\.(.*)$/);
|
|
my $instance = $1;
|
|
my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_amperageProbeTableEntry}, instance => $instance);
|
|
|
|
next if ($self->check_filter(section => 'amperage', instance => $instance));
|
|
$self->{components}->{amperage}->{total}++;
|
|
|
|
my ($divisor, $unit) = (1000, 'A');
|
|
if ($result->{amperageProbeType} =~ /amperageProbeTypeIsPowerSupplyAmps|amperageProbeTypeIsSystemAmps/) {
|
|
$divisor = 10;
|
|
} elsif ($result->{amperageProbeType} =~ /amperageProbeTypeIsPowerSupplyWatts|amperageProbeTypeIsSystemWatts/) {
|
|
$unit = 'W';
|
|
$divisor = 1;
|
|
}
|
|
$result->{amperageProbeReading} = (defined($result->{amperageProbeReading})) ? $result->{amperageProbeReading} / $divisor : 'unknown';
|
|
$self->{output}->output_add(long_msg => sprintf("amperage '%s' status is '%s' [instance = %s] [state = %s] [value = %s]",
|
|
$result->{amperageProbeLocationName}, $result->{amperageProbeStatus}, $instance,
|
|
$result->{amperageProbeStateSettings}, $result->{amperageProbeReading}));
|
|
|
|
my $exit = $self->get_severity(label => 'default.state', section => 'amperage.state', value => $result->{amperageProbeStateSettings});
|
|
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
|
|
$self->{output}->output_add(severity => $exit,
|
|
short_msg => sprintf("Amperage '%s' state is '%s'", $result->{amperageProbeLocationName}, $result->{amperageProbeStateSettings}));
|
|
next;
|
|
}
|
|
|
|
$exit = $self->get_severity(label => 'probe.status', section => 'amperage.status', value => $result->{amperageProbeStatus});
|
|
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
|
|
$self->{output}->output_add(severity => $exit,
|
|
short_msg => sprintf("Amperage '%s' status is '%s'", $result->{amperageProbeLocationName}, $result->{amperageProbeStatus}));
|
|
}
|
|
|
|
next if ($result->{amperageProbeType} =~ /amperageProbeTypeIsDiscrete/);
|
|
|
|
if (defined($result->{amperageProbeReading}) && $result->{amperageProbeReading} =~ /[0-9]/) {
|
|
my ($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'amperage', instance => $instance, value => $result->{amperageProbeReading});
|
|
if ($checked == 0) {
|
|
$result->{amperageProbeLowerNonCriticalThreshold} = (defined($result->{amperageProbeLowerNonCriticalThreshold}) && $result->{amperageProbeLowerNonCriticalThreshold} =~ /[0-9]/) ?
|
|
$result->{amperageProbeLowerNonCriticalThreshold} / $divisor : '';
|
|
$result->{amperageProbeLowerCriticalThreshold} = (defined($result->{amperageProbeLowerCriticalThreshold}) && $result->{amperageProbeLowerCriticalThreshold} =~ /[0-9]/) ?
|
|
$result->{amperageProbeLowerCriticalThreshold} / $divisor : '';
|
|
$result->{amperageProbeUpperNonCriticalThreshold} = (defined($result->{amperageProbeUpperNonCriticalThreshold}) && $result->{amperageProbeUpperNonCriticalThreshold} =~ /[0-9]/) ?
|
|
$result->{amperageProbeUpperNonCriticalThreshold} / $divisor : '';
|
|
$result->{amperageProbeUpperCriticalThreshold} = (defined($result->{amperageProbeUpperCriticalThreshold}) && $result->{amperageProbeUpperCriticalThreshold} =~ /[0-9]/) ?
|
|
$result->{amperageProbeUpperCriticalThreshold} / $divisor : '';
|
|
my $warn_th = $result->{amperageProbeLowerNonCriticalThreshold} . ':' . $result->{amperageProbeUpperNonCriticalThreshold};
|
|
my $crit_th = $result->{amperageProbeLowerCriticalThreshold} . ':' . $result->{amperageProbeUpperCriticalThreshold};
|
|
$self->{perfdata}->threshold_validate(label => 'warning-amperage-instance-' . $instance, value => $warn_th);
|
|
$self->{perfdata}->threshold_validate(label => 'critical-amperage-instance-' . $instance, value => $crit_th);
|
|
|
|
$exit = $self->{perfdata}->threshold_check(value => $result->{amperageProbeReading}, threshold => [ { label => 'critical-amperage-instance-' . $instance, exit_litteral => 'critical' },
|
|
{ label => 'warning-amperage-instance-' . $instance, exit_litteral => 'warning' } ]);
|
|
$warn = $self->{perfdata}->get_perfdata_for_output(label => 'warning-amperage-instance-' . $instance);
|
|
$crit = $self->{perfdata}->get_perfdata_for_output(label => 'critical-amperage-instance-' . $instance);
|
|
}
|
|
|
|
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
|
|
$self->{output}->output_add(severity => $exit,
|
|
short_msg => sprintf("Amperage '%s' is %s %s", $result->{amperageProbeLocationName}, $result->{amperageProbeReading}, $unit));
|
|
}
|
|
$self->{output}->perfdata_add(
|
|
label => 'amperage', unit => $unit,
|
|
nlabel => 'hardware.probe.amperage.' . ($unit eq 'A' ? 'ampere' : 'watt'),
|
|
instances => $result->{amperageProbeLocationName},
|
|
value => $result->{amperageProbeReading},
|
|
warning => $warn,
|
|
critical => $crit,
|
|
);
|
|
}
|
|
}
|
|
}
|
|
|
|
1;
|