482 lines
23 KiB
Perl
482 lines
23 KiB
Perl
#
|
|
# Copyright 2018 Centreon (http://www.centreon.com/)
|
|
#
|
|
# Centreon is a full-fledged industry-strength solution that meets
|
|
# the needs in IT infrastructure and application monitoring for
|
|
# service performance.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
|
|
package network::f5::bigip::snmp::mode::trunks;
|
|
|
|
use base qw(centreon::plugins::templates::counter);
|
|
|
|
use strict;
|
|
use warnings;
|
|
use Digest::MD5 qw(md5_hex);
|
|
|
|
my $instance_mode;
|
|
|
|
my $thresholds = {
|
|
trunk => [
|
|
['up', 'OK'],
|
|
['down', 'CRITICAL'],
|
|
['disable', 'CRITICAL'],
|
|
['uninitialized', 'CRITICAL'],
|
|
['loopback', 'OK'],
|
|
['unpopulated', 'OK'],
|
|
],
|
|
};
|
|
|
|
sub custom_threshold_output {
|
|
my ($self, %options) = @_;
|
|
|
|
return $instance_mode->get_severity(section => 'trunk', value => $self->{result_values}->{sysTrunkStatus});
|
|
}
|
|
|
|
sub custom_status_calc {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{result_values}->{sysTrunkStatus} = $options{new_datas}->{$self->{instance} . '_sysTrunkStatus'};
|
|
return 0;
|
|
}
|
|
|
|
sub custom_traffic_perfdata {
|
|
my ($self, %options) = @_;
|
|
|
|
my $extra_label = '';
|
|
if (!defined($options{extra_instance}) || $options{extra_instance} != 0) {
|
|
$extra_label .= '_' . $self->{result_values}->{display};
|
|
}
|
|
|
|
my ($warning, $critical);
|
|
if ($instance_mode->{option_results}->{units_traffic} eq '%' && defined($self->{result_values}->{speed}) && $self->{result_values}->{speed} > 0) {
|
|
$warning = $self->{perfdata}->get_perfdata_for_output(label => 'warning-traffic-' . $self->{result_values}->{label}, total => $self->{result_values}->{speed}, cast_int => 1);
|
|
$critical = $self->{perfdata}->get_perfdata_for_output(label => 'critical-traffic-' . $self->{result_values}->{label}, total => $self->{result_values}->{speed}, cast_int => 1);
|
|
} elsif ($instance_mode->{option_results}->{units_traffic} eq 'b/s') {
|
|
$warning = $self->{perfdata}->get_perfdata_for_output(label => 'warning-traffic-' . $self->{result_values}->{label});
|
|
$critical = $self->{perfdata}->get_perfdata_for_output(label => 'critical-traffic-' . $self->{result_values}->{label});
|
|
}
|
|
|
|
my $speed = $self->{result_values}->{speed} > 0 ? $self->{result_values}->{speed} : undef;
|
|
|
|
$self->{output}->perfdata_add(label => 'traffic_' . $self->{result_values}->{label} . $extra_label, unit => 'b/s',
|
|
value => sprintf("%.2f", $self->{result_values}->{traffic_per_seconds}),
|
|
warning => $warning,
|
|
critical => $critical,
|
|
min => 0, max => $speed);
|
|
}
|
|
|
|
sub custom_traffic_threshold {
|
|
my ($self, %options) = @_;
|
|
|
|
my $exit = 'ok';
|
|
if ($instance_mode->{option_results}->{units_traffic} eq '%' && defined($self->{result_values}->{speed}) && $self->{result_values}->{speed} > 0) {
|
|
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{traffic_prct}, threshold => [ { label => 'critical-traffic-' . $self->{result_values}->{label}, exit_litteral => 'critical' }, { label => 'warning-traffic-' . $self->{result_values}->{label}, exit_litteral => 'warning' } ]);
|
|
} elsif ($instance_mode->{option_results}->{units_traffic} eq 'b/s') {
|
|
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{traffic_per_seconds}, threshold => [ { label => 'critical-traffic-' . $self->{result_values}->{label}, exit_litteral => 'critical' }, { label => 'warning-traffic-' . $self->{result_values}->{label}, exit_litteral => 'warning' } ]);
|
|
}
|
|
return $exit;
|
|
}
|
|
|
|
sub custom_traffic_output {
|
|
my ($self, %options) = @_;
|
|
|
|
my ($traffic_value, $traffic_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{traffic_per_seconds}, network => 1);
|
|
my $msg = sprintf("Traffic %s : %s/s (%s)",
|
|
ucfirst($self->{result_values}->{label}), $traffic_value . $traffic_unit,
|
|
defined($self->{result_values}->{traffic_prct}) ? sprintf("%.2f%%", $self->{result_values}->{traffic_prct}) : '-');
|
|
return $msg;
|
|
}
|
|
|
|
sub custom_traffic_calc {
|
|
my ($self, %options) = @_;
|
|
|
|
if (!defined($options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{label_ref}})) {
|
|
$self->{error_msg} = "buffer creation";
|
|
return -2;
|
|
}
|
|
|
|
my $diff_traffic = ($options{new_datas}->{$self->{instance} . '_' . $options{extra_options}->{label_ref}} - $options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{label_ref}});
|
|
|
|
$self->{result_values}->{speed} = defined($instance_mode->{option_results}->{speed}) && $instance_mode->{option_results}->{speed} ne '' ? $instance_mode->{option_results}->{speed} : $options{new_datas}->{$self->{instance} . '_' . $options{extra_options}->{speed}};
|
|
$self->{result_values}->{speed} = $self->{result_values}->{speed} * 1000 * 1000; # bits
|
|
$self->{result_values}->{traffic_per_seconds} = $diff_traffic * 8 / $options{delta_time};
|
|
$self->{result_values}->{traffic_prct} = $self->{result_values}->{traffic_per_seconds} * 100 / $self->{result_values}->{speed} if ($self->{result_values}->{speed} > 0);
|
|
$self->{result_values}->{label} = $options{extra_options}->{label};
|
|
$self->{result_values}->{display} = $options{new_datas}->{$self->{instance} . '_display'};
|
|
return 0;
|
|
}
|
|
|
|
sub custom_errors_perfdata {
|
|
my ($self, %options) = @_;
|
|
|
|
my $extra_label = '';
|
|
if (!defined($options{extra_instance}) || $options{extra_instance} != 0) {
|
|
$extra_label .= '_' . $self->{result_values}->{display};
|
|
}
|
|
|
|
my $warning = $self->{perfdata}->get_perfdata_for_output(label => 'warning-packets-error-' . $self->{result_values}->{label});
|
|
my $critical = $self->{perfdata}->get_perfdata_for_output(label => 'critical-packets-error-' . $self->{result_values}->{label});
|
|
|
|
$self->{output}->perfdata_add(label => 'packets_error_' . $self->{result_values}->{label} . $extra_label, unit => '%',
|
|
value => sprintf("%.2f", $self->{result_values}->{errors_prct}),
|
|
warning => $warning,
|
|
critical => $critical,
|
|
min => 0, max => 100);
|
|
}
|
|
|
|
sub custom_errors_threshold {
|
|
my ($self, %options) = @_;
|
|
|
|
my $exit = 'ok';
|
|
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{errors_prct}, threshold => [ { label => 'critical-packets-error-' . $self->{result_values}->{label}, exit_litteral => 'critical' }, { label => 'warning-packets-error-' . $self->{result_values}->{label}, exit_litteral => 'warning' } ]);
|
|
|
|
return $exit;
|
|
}
|
|
|
|
sub custom_errors_output {
|
|
my ($self, %options) = @_;
|
|
|
|
my $msg = sprintf("Packets %s Error : %s",
|
|
ucfirst($self->{result_values}->{label}), defined($self->{result_values}->{errors_prct}) ? sprintf("%.2f%%", $self->{result_values}->{errors_prct}) : '-');
|
|
return $msg;
|
|
}
|
|
|
|
sub custom_errors_calc {
|
|
my ($self, %options) = @_;
|
|
|
|
if (!defined($options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{errors}})) {
|
|
$self->{error_msg} = "buffer creation";
|
|
return -2;
|
|
}
|
|
|
|
my $diff_errors = ($options{new_datas}->{$self->{instance} . '_' . $options{extra_options}->{errors}} - $options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{errors}});
|
|
my $diff_packets = ($options{new_datas}->{$self->{instance} . '_' . $options{extra_options}->{packets}} - $options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{packets}});
|
|
|
|
$self->{result_values}->{errors_prct} = ($diff_packets != 0) ? $diff_errors * 100 / $diff_packets : 0;
|
|
$self->{result_values}->{label} = $options{extra_options}->{label};
|
|
$self->{result_values}->{display} = $options{new_datas}->{$self->{instance} . '_display'};
|
|
return 0;
|
|
}
|
|
|
|
sub custom_drops_perfdata {
|
|
my ($self, %options) = @_;
|
|
|
|
my $extra_label = '';
|
|
if (!defined($options{extra_instance}) || $options{extra_instance} != 0) {
|
|
$extra_label .= '_' . $self->{result_values}->{display};
|
|
}
|
|
|
|
my $warning = $self->{perfdata}->get_perfdata_for_output(label => 'warning-packets-drop-' . $self->{result_values}->{label});
|
|
my $critical = $self->{perfdata}->get_perfdata_for_output(label => 'critical-packets-drop-' . $self->{result_values}->{label});
|
|
|
|
$self->{output}->perfdata_add(label => 'packets_drop_' . $self->{result_values}->{label} . $extra_label, unit => '%',
|
|
value => sprintf("%.2f", $self->{result_values}->{drops_prct}),
|
|
warning => $warning,
|
|
critical => $critical,
|
|
min => 0, max => 100);
|
|
}
|
|
|
|
sub custom_drops_threshold {
|
|
my ($self, %options) = @_;
|
|
|
|
my $exit = 'ok';
|
|
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{drops_prct}, threshold => [ { label => 'critial-packets-drop-' . $self->{result_values}->{label}, exit_litteral => 'critical' }, { label => 'warning-packets-drop-' . $self->{result_values}->{label}, exit_litteral => 'warning' } ]);
|
|
|
|
return $exit;
|
|
}
|
|
|
|
sub custom_drops_output {
|
|
my ($self, %options) = @_;
|
|
|
|
my $msg = sprintf("Packets %s Drop : %s",
|
|
ucfirst($self->{result_values}->{label}), defined($self->{result_values}->{drops_prct}) ? sprintf("%.2f%%", $self->{result_values}->{drops_prct}) : '-');
|
|
return $msg;
|
|
}
|
|
|
|
sub custom_drops_calc {
|
|
my ($self, %options) = @_;
|
|
|
|
if (!defined($options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{drops}})) {
|
|
$self->{error_msg} = "buffer creation";
|
|
return -2;
|
|
}
|
|
|
|
my $diff_drops = ($options{new_datas}->{$self->{instance} . '_' . $options{extra_options}->{drops}} - $options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{drops}});
|
|
my $diff_packets = ($options{new_datas}->{$self->{instance} . '_' . $options{extra_options}->{packets}} - $options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{packets}});
|
|
|
|
$self->{result_values}->{drops_prct} = ($diff_packets != 0) ? $diff_drops * 100 / $diff_packets : 0;
|
|
$self->{result_values}->{label} = $options{extra_options}->{label};
|
|
$self->{result_values}->{display} = $options{new_datas}->{$self->{instance} . '_display'};
|
|
return 0;
|
|
}
|
|
|
|
sub set_counters {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{maps_counters_type} = [
|
|
{ name => 'trunks', type => 1, cb_prefix_output => 'prefix_trunks_output', message_multiple => 'All trunks are ok', skipped_code => { -10 => 1 } },
|
|
];
|
|
|
|
$self->{maps_counters}->{trunks} = [
|
|
{ label => 'status', threshold => 0, set => {
|
|
key_values => [ { name => 'sysTrunkStatus' } ],
|
|
closure_custom_calc => $self->can('custom_status_calc'),
|
|
output_template => "status is '%s'", output_error_template => 'Status : %s',
|
|
output_use => 'sysTrunkStatus',
|
|
closure_custom_perfdata => sub { return 0; },
|
|
closure_custom_threshold_check => $self->can('custom_threshold_output'),
|
|
}
|
|
},
|
|
{ label => 'traffic-in', set => {
|
|
key_values => [ { name => 'sysTrunkStatBytesIn', diff => 1 }, { name => 'sysTrunkOperBw', diff => 1 }, { name => 'display' } ],
|
|
closure_custom_calc => $self->can('custom_traffic_calc'), per_second => 1,
|
|
closure_custom_calc_extra_options => { label_ref => 'sysTrunkStatBytesIn', speed => 'sysTrunkOperBw', label => 'in' },
|
|
closure_custom_output => $self->can('custom_traffic_output'), output_error_template => 'Traffic In : %s',
|
|
closure_custom_perfdata => $self->can('custom_traffic_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_traffic_threshold'),
|
|
}
|
|
},
|
|
{ label => 'traffic-out', set => {
|
|
key_values => [ { name => 'sysTrunkStatBytesOut', diff => 1 }, { name => 'sysTrunkOperBw', diff => 1 }, { name => 'display' } ],
|
|
closure_custom_calc => $self->can('custom_traffic_calc'), per_second => 1,
|
|
closure_custom_calc_extra_options => { label_ref => 'sysTrunkStatBytesOut', speed => 'sysTrunkOperBw', label => 'out' },
|
|
closure_custom_output => $self->can('custom_traffic_output'), output_error_template => 'Traffic Out : %s',
|
|
closure_custom_perfdata => $self->can('custom_traffic_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_traffic_threshold'),
|
|
}
|
|
},
|
|
{ label => 'packets-error-in', set => {
|
|
key_values => [ { name => 'sysTrunkStatErrorsIn', diff => 1 }, { name => 'sysTrunkStatPktsIn', diff => 1 }, { name => 'display' } ],
|
|
closure_custom_calc => $self->can('custom_errors_calc'),
|
|
closure_custom_calc_extra_options => { errors => 'sysTrunkStatErrorsIn', packets => 'sysTrunkStatPktsIn', label => 'in' },
|
|
closure_custom_output => $self->can('custom_errors_output'), output_error_template => 'Packets In Error : %s',
|
|
closure_custom_perfdata => $self->can('custom_errors_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_errors_threshold'),
|
|
}
|
|
},
|
|
{ label => 'packets-error-out', set => {
|
|
key_values => [ { name => 'sysTrunkStatErrorsOut', diff => 1 }, { name => 'sysTrunkStatPktsOut', diff => 1 }, { name => 'display' } ],
|
|
closure_custom_calc => $self->can('custom_errors_calc'),
|
|
closure_custom_calc_extra_options => { errors => 'sysTrunkStatErrorsOut', packets => 'sysTrunkStatPktsOut', label => 'out' },
|
|
closure_custom_output => $self->can('custom_errors_output'), output_error_template => 'Packets Out Error : %s',
|
|
closure_custom_perfdata => $self->can('custom_errors_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_errors_threshold'),
|
|
}
|
|
},
|
|
{ label => 'packets-drop-in', set => {
|
|
key_values => [ { name => 'sysTrunkStatDropsIn', diff => 1 }, { name => 'sysTrunkStatPktsIn', diff => 1 }, { name => 'display' } ],
|
|
closure_custom_calc => $self->can('custom_drops_calc'),
|
|
closure_custom_calc_extra_options => { drops => 'sysTrunkStatDropsIn', packets => 'sysTrunkStatPktsIn', label => 'in' },
|
|
closure_custom_output => $self->can('custom_drops_output'), output_error_template => 'Packets In Drop : %s',
|
|
closure_custom_perfdata => $self->can('custom_drops_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_drops_threshold'),
|
|
}
|
|
},
|
|
{ label => 'packets-drop-out', set => {
|
|
key_values => [ { name => 'sysTrunkStatDropsOut', diff => 1 }, { name => 'sysTrunkStatPktsOut', diff => 1 }, { name => 'display' } ],
|
|
closure_custom_calc => $self->can('custom_drops_calc'),
|
|
closure_custom_calc_extra_options => { drops => 'sysTrunkStatDropsOut', packets => 'sysTrunkStatPktsOut', label => 'out' },
|
|
closure_custom_output => $self->can('custom_drops_output'), output_error_template => 'Packets Out Drop : %s',
|
|
closure_custom_perfdata => $self->can('custom_drops_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_drops_threshold'),
|
|
}
|
|
},
|
|
];
|
|
}
|
|
|
|
sub prefix_trunks_output {
|
|
my ($self, %options) = @_;
|
|
|
|
return "Trunk '" . $options{instance_value}->{display} . "' ";
|
|
}
|
|
|
|
sub new {
|
|
my ($class, %options) = @_;
|
|
my $self = $class->SUPER::new(package => __PACKAGE__, %options, statefile => 1);
|
|
bless $self, $class;
|
|
|
|
$self->{version} = '1.0';
|
|
$options{options}->add_options(arguments =>
|
|
{
|
|
"filter-name:s" => { name => 'filter_name' },
|
|
"threshold-overload:s@" => { name => 'threshold_overload' },
|
|
"units-traffic:s" => { name => 'units_traffic', default => '%' },
|
|
"speed:s" => { name => 'speed' },
|
|
});
|
|
|
|
return $self;
|
|
}
|
|
|
|
sub check_options {
|
|
my ($self, %options) = @_;
|
|
$self->SUPER::check_options(%options);
|
|
|
|
$instance_mode = $self;
|
|
|
|
$self->{overload_th} = {};
|
|
foreach my $val (@{$self->{option_results}->{threshold_overload}}) {
|
|
if ($val !~ /^(.*?),(.*?),(.*)$/) {
|
|
$self->{output}->add_option_msg(short_msg => "Wrong threshold-overload option '" . $val . "'.");
|
|
$self->{output}->option_exit();
|
|
}
|
|
my ($section, $status, $filter) = ($1, $2, $3);
|
|
if ($self->{output}->is_litteral_status(status => $status) == 0) {
|
|
$self->{output}->add_option_msg(short_msg => "Wrong threshold-overload status '" . $val . "'.");
|
|
$self->{output}->option_exit();
|
|
}
|
|
$self->{overload_th}->{$section} = [] if (!defined($self->{overload_th}->{$section}));
|
|
push @{$self->{overload_th}->{$section}}, {filter => $filter, status => $status};
|
|
}
|
|
}
|
|
|
|
sub get_severity {
|
|
my ($self, %options) = @_;
|
|
my $status = 'UNKNOWN'; # default
|
|
|
|
if (defined($self->{overload_th}->{$options{section}})) {
|
|
foreach (@{$self->{overload_th}->{$options{section}}}) {
|
|
if ($options{value} =~ /$_->{filter}/i) {
|
|
$status = $_->{status};
|
|
return $status;
|
|
}
|
|
}
|
|
}
|
|
foreach (@{$thresholds->{$options{section}}}) {
|
|
if ($options{value} =~ /$$_[0]/i) {
|
|
$status = $$_[1];
|
|
return $status;
|
|
}
|
|
}
|
|
|
|
return $status;
|
|
}
|
|
|
|
my %map_trunk_status = (
|
|
0 => 'up',
|
|
1 => 'down',
|
|
2 => 'disable',
|
|
3 => 'uninitialized',
|
|
4 => 'loopback',
|
|
5 => 'unpopulated',
|
|
);
|
|
|
|
my $mapping_sysTrunk = {
|
|
sysTrunkName => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.1.2.1.1' },
|
|
sysTrunkStatus => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.1.2.1.2', map => \%map_trunk_status },
|
|
sysTrunkOperBw => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.1.2.1.5' },
|
|
};
|
|
my $oid_sysTrunkTable = '.1.3.6.1.4.1.3375.2.1.2.12.1.2';
|
|
|
|
my $mapping_sysTrunkStat = {
|
|
sysTrunkStatPktsIn => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.2.3.1.2' },
|
|
sysTrunkStatBytesIn => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.2.3.1.3' }, # Bytes
|
|
sysTrunkStatPktsOut => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.2.3.1.4' },
|
|
sysTrunkStatBytesOut => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.2.3.1.5' }, # Bytes
|
|
sysTrunkStatErrorsIn => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.2.3.1.8' },
|
|
sysTrunkStatErrorsOut => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.2.3.1.9' },
|
|
sysTrunkStatDropsIn => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.2.3.1.10' },
|
|
sysTrunkStatDropsOut => { oid => '.1.3.6.1.4.1.3375.2.1.2.12.2.3.1.11' },
|
|
};
|
|
my $oid_sysTrunkStatTable = '.1.3.6.1.4.1.3375.2.1.2.12.2.3';
|
|
|
|
sub manage_selection {
|
|
my ($self, %options) = @_;
|
|
|
|
if ($options{snmp}->is_snmpv1()) {
|
|
$self->{output}->add_option_msg(short_msg => "Need to use SNMP v2c or v3.");
|
|
$self->{output}->option_exit();
|
|
}
|
|
|
|
my $results = $options{snmp}->get_multiple_table(oids => [
|
|
{ oid => $oid_sysTrunkTable },
|
|
{ oid => $oid_sysTrunkStatTable },
|
|
], nothing_quit => 1);
|
|
|
|
$self->{trunks} = {};
|
|
foreach my $oid (keys %{$results->{$oid_sysTrunkTable}}) {
|
|
next if ($oid !~ /^$mapping_sysTrunk->{sysTrunkName}->{oid}\.(.*)$/);
|
|
my $instance = $1;
|
|
my $result_sysTrunk = $options{snmp}->map_instance(mapping => $mapping_sysTrunk, results => $results->{$oid_sysTrunkTable}, instance => $instance);
|
|
my $result_sysTrunkStat = $options{snmp}->map_instance(mapping => $mapping_sysTrunkStat, results => $results->{$oid_sysTrunkStatTable}, instance => $instance);
|
|
|
|
if (defined($self->{option_results}->{filter_name}) && $self->{option_results}->{filter_name} ne '' &&
|
|
$result_sysTrunk->{sysTrunkName} !~ /$self->{option_results}->{filter_name}/) {
|
|
$self->{output}->output_add(long_msg => "skipping '" . $result_sysTrunk->{sysTrunkName} . "': no matching filter name.", debug => 1);
|
|
next;
|
|
}
|
|
|
|
$self->{trunks}->{$result_sysTrunk->{sysTrunkName}} = {
|
|
display => $result_sysTrunk->{sysTrunkName},
|
|
%$result_sysTrunk, %$result_sysTrunkStat,
|
|
};
|
|
}
|
|
|
|
if (scalar(keys %{$self->{trunks}}) <= 0) {
|
|
$self->{output}->add_option_msg(short_msg => "No trunks found.");
|
|
$self->{output}->option_exit();
|
|
}
|
|
|
|
$self->{cache_name} = "f5_bipgip_" . $options{snmp}->get_hostname() . '_' . $options{snmp}->get_port() . '_' . $self->{mode} . '_' .
|
|
(defined($self->{option_results}->{filter_name}) ? md5_hex($self->{option_results}->{filter_name}) : md5_hex('all')) . '_' .
|
|
(defined($self->{option_results}->{filter_counters}) ? md5_hex($self->{option_results}->{filter_counters}) : md5_hex('all'));
|
|
}
|
|
|
|
1;
|
|
|
|
__END__
|
|
|
|
=head1 MODE
|
|
|
|
Check Trunks usage.
|
|
|
|
=over 8
|
|
|
|
=item B<--filter-name>
|
|
|
|
Filter by trunks name (regexp can be used).
|
|
|
|
=item B<--threshold-overload>
|
|
|
|
Set to overload default threshold values (syntax: section,status,regexp)
|
|
It used before default thresholds (order stays).
|
|
Example: --threshold-overload='trunk,CRITICAL,^(?!(up)$)'
|
|
|
|
=item B<--units-traffic>
|
|
|
|
Units of thresholds for the traffic (Default: '%') ('%', 'b/s').
|
|
|
|
=item B<--warning-*>
|
|
|
|
Threshold warning.
|
|
Can be: 'traffic-in', 'traffic-out', 'packets-error-in' (%),
|
|
'packets-error-out' (%), 'packets-drop-in' (%), 'packets-drop-out' (%)
|
|
|
|
=item B<--critical-*>
|
|
|
|
Threshold critical.
|
|
Can be: 'traffic-in', 'traffic-out', 'packets-error-in' (%),
|
|
'packets-error-out' (%), 'packets-drop-in' (%), 'packets-drop-out' (%)
|
|
|
|
=item B<--speed>
|
|
|
|
Set trunk speed in Mbps (Default: sysTrunkOperBw).
|
|
If not set and sysTrunkOperBw OID value is 0,
|
|
percentage thresholds will not be applied on traffic metrics.
|
|
|
|
=back
|
|
|
|
=cut
|