centreon-plugins/hardware/pdu/apc/snmp/mode/components/humidity.pm

109 lines
5.2 KiB
Perl

#
# Copyright 2022 Centreon (http://www.centreon.com/)
#
# Centreon is a full-fledged industry-strength solution that meets
# the needs in IT infrastructure and application monitoring for
# service performance.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
package hardware::pdu::apc::snmp::mode::components::humidity;
use strict;
use warnings;
my %map_status = (
1 => 'notPresent',
2 => 'belowMin',
3 => 'belowLow',
4 => 'normal',
5 => 'aboveHigh',
6 => 'aboveMax',
);
my %map_type = (
1 => 'temperatureOnly',
2 => 'temperatureHumidity',
3 => 'commsLost',
4 => 'notInstalled',
);
# In MIB 'PowerNet-MIB'
my $mapping = {
rPDU2SensorTempHumidityStatusName => { oid => '.1.3.6.1.4.1.318.1.1.26.10.2.2.1.3' },
rPDU2SensorTempHumidityStatusNumber => { oid => '.1.3.6.1.4.1.318.1.1.26.10.2.2.1.4' },
rPDU2SensorTempHumidityStatusType => { oid => '.1.3.6.1.4.1.318.1.1.26.10.2.2.1.5', map => \%map_type },
rPDU2SensorTempHumidityStatusRelativeHumidity => { oid => '.1.3.6.1.4.1.318.1.1.26.10.2.2.1.10' },
rPDU2SensorTempHumidityStatusHumidityStatus => { oid => '.1.3.6.1.4.1.318.1.1.26.10.2.2.1.11', map => \%map_status },
};
my $oid_rPDU2SensorTempHumidityStatusEntry = '.1.3.6.1.4.1.318.1.1.26.10.2.2.1';
sub load {
my ($self) = @_;
foreach (@{$self->{request}}) {
return if ($_->{oid} eq $oid_rPDU2SensorTempHumidityStatusEntry);
}
push @{$self->{request}}, { oid => $oid_rPDU2SensorTempHumidityStatusEntry };
}
sub check {
my ($self) = @_;
$self->{output}->output_add(long_msg => "Checking humidities");
$self->{components}->{humidity} = {name => 'humidities', total => 0, skip => 0};
return if ($self->check_filter(section => 'humidity'));
foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}->{$oid_rPDU2SensorTempHumidityStatusEntry}})) {
next if ($oid !~ /^$mapping->{rPDU2SensorTempHumidityStatusHumidityStatus}->{oid}\.(.*)$/);
my $instance = $1;
my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}->{$oid_rPDU2SensorTempHumidityStatusEntry}, instance => $instance);
next if ($result->{rPDU2SensorTempHumidityStatusType} !~ /temperatureHumidity/i);
next if ($self->check_filter(section => 'humidity', instance => $result->{rPDU2SensorTempHumidityStatusNumber}));
next if ($result->{rPDU2SensorTempHumidityStatusHumidityStatus} !~ /notPresent/i &&
$self->absent_problem(section => 'humidity', instance => $result->{rPDU2SensorTempHumidityStatusNumber}));
$self->{components}->{humidity}->{total}++;
$self->{output}->output_add(long_msg => sprintf("Humidity '%s' status is '%s' [instance: %s, value: %s]",
$result->{rPDU2SensorTempHumidityStatusName}, $result->{rPDU2SensorTempHumidityStatusHumidityStatus},
$result->{rPDU2SensorTempHumidityStatusNumber}, $result->{rPDU2SensorTempHumidityStatusRelativeHumidity}));
my $exit = $self->get_severity(section => 'humidity', instance => $result->{rPDU2SensorTempHumidityStatusName}, value => $result->{rPDU2SensorTempHumidityStatusHumidityStatus});
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
$self->{output}->output_add(severity => $exit,
short_msg => sprintf("Humidity '%s' status is %s",
$result->{rPDU2SensorTempHumidityStatusName}, $result->{rPDU2SensorTempHumidityStatusHumidityStatus}));
}
if (defined($result->{rPDU2SensorTempHumidityStatusRelativeHumidity}) && $result->{rPDU2SensorTempHumidityStatusRelativeHumidity} =~ /[0-9]/) {
my $value = $result->{rPDU2SensorTempHumidityStatusRelativeHumidity};
my ($exit2, $warn, $crit, $checked) = $self->get_severity_numeric(section => 'humidity', instance => $result->{rPDU2SensorTempHumidityStatusNumber}, value => $value);
if (!$self->{output}->is_status(value => $exit2, compare => 'ok', litteral => 1)) {
$self->{output}->output_add(severity => $exit2,
short_msg => sprintf("Humidity '%s' value is %s %%", $result->{rPDU2SensorTempHumidityStatusName}, $value));
}
$self->{output}->perfdata_add(
label => 'hum', unit => '%',
nlabel => 'hardware.sensor.humidity.percentage',
instances => $result->{rPDU2SensorTempHumidityStatusName},
value => $value,
warning => $warn,
critical => $crit,
min => 0, max => 100
);
}
}
}
1;