481 lines
19 KiB
Perl
481 lines
19 KiB
Perl
#
|
|
# Copyright 2020 Centreon (http://www.centreon.com/)
|
|
#
|
|
# Centreon is a full-fledged industry-strength solution that meets
|
|
# the needs in IT infrastructure and application monitoring for
|
|
# service performance.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
|
|
package network::atrica::snmp::mode::connections;
|
|
|
|
use base qw(snmp_standard::mode::interfaces);
|
|
|
|
use strict;
|
|
use warnings;
|
|
|
|
sub set_oids_label {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{oids_label} = {
|
|
'atrconncepgendescr' => { oid => '.1.3.6.1.4.1.6110.2.7.5.1.1', cache => 'reload_cache_index_value' },
|
|
'atrconningdescr' => { oid => '.1.3.6.1.4.1.6110.2.2.1.1.2', cache => 'reload_cache_index_value' },
|
|
};
|
|
}
|
|
|
|
sub set_oids_status {
|
|
my ($self, %options) = @_;
|
|
|
|
if ($self->{option_results}->{oid_filter} eq 'atrconncepgendescr') {
|
|
$self->{oid_adminstatus} = '.1.3.6.1.4.1.6110.2.7.5.1.7';
|
|
$self->{oid_adminstatus_mapping} = {
|
|
1 => 'up', 2 => 'down',
|
|
};
|
|
$self->{oid_opstatus} = '.1.3.6.1.4.1.6110.2.7.5.1.8';
|
|
$self->{oid_opstatus_mapping} = {
|
|
1 => 'up', 2 => 'down', 3 => 'oneWay', 4 => 'twoWay', 5 => 'fastProtected',
|
|
};
|
|
if (!defined($self->{option_results}->{critical_status})) {
|
|
$self->{option_results}->{critical_status} = '%{admstatus} eq "up" and %{opstatus} ne "up"';
|
|
}
|
|
} else {
|
|
$self->{oid_adminstatus} = '.1.3.6.1.4.1.6110.2.2.1.1.3';
|
|
$self->{oid_adminstatus_mapping} = {
|
|
2 => 'off', 3 => 'on',
|
|
};
|
|
$self->{oid_opstatus} = '.1.3.6.1.4.1.6110.2.2.1.1.4';
|
|
$self->{oid_opstatus_mapping} = {
|
|
2 => 'off', 3 => 'systemBusy', 4 => 'dependencyBusy', 5 => 'inService', 6 => 'alterInService', 7 => 'failed',
|
|
8 => 'mainInServiceViaCoreLinkProtec', 9 => 'alterInServiceViaCoreLinkProtec',
|
|
10 => 'mainAndAltDownConnUpSendingToMain', 11 => 'mainAndAltDownConnUpSendingToAlt',
|
|
};
|
|
if (!defined($self->{option_results}->{critical_status})) {
|
|
$self->{option_results}->{critical_status} = '%{admstatus} eq "on" and %{opstatus} ne "inService"';
|
|
}
|
|
}
|
|
}
|
|
|
|
sub set_speed {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{oid_speed} = '.1.3.6.1.4.1.6110.2.9.1.1.14'; # in Kb/s
|
|
}
|
|
|
|
sub set_oids_errors {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{oid_ing_eir_discard} = '.1.3.6.1.4.1.6110.2.2.4.1.1.7'; # in B
|
|
$self->{oid_eg_eir_discard} = '.1.3.6.1.4.1.6110.2.3.2.1.1.6'; # in B
|
|
}
|
|
|
|
sub set_oids_traffic {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{oid_ing_cir} = '.1.3.6.1.4.1.6110.2.2.4.1.1.4'; # in B
|
|
$self->{oid_ing_eir} = '.1.3.6.1.4.1.6110.2.2.4.1.1.5'; # in B
|
|
$self->{oid_eg_cir} = '.1.3.6.1.4.1.6110.2.3.2.1.1.4'; # in B
|
|
$self->{oid_eg_eir} = '.1.3.6.1.4.1.6110.2.3.2.1.1.5'; # in B
|
|
}
|
|
|
|
sub default_warning_status {
|
|
my ($self, %options) = @_;
|
|
|
|
return undef;
|
|
}
|
|
|
|
sub default_critical_status {
|
|
my ($self, %options) = @_;
|
|
|
|
return undef;
|
|
}
|
|
|
|
sub default_check_status {
|
|
my ($self, %options) = @_;
|
|
|
|
return '%{opstatus} eq "up" or %{opstatus} eq "inService"';
|
|
}
|
|
|
|
sub default_global_admin_up_rule {
|
|
my ($self, %options) = @_;
|
|
|
|
return '%{admstatus} eq "up" or %{admstatus} eq "on"';
|
|
}
|
|
|
|
sub default_global_admin_down_rule {
|
|
my ($self, %options) = @_;
|
|
|
|
return '%{admstatus} ne "up" and %{admstatus} ne "on"';
|
|
}
|
|
|
|
sub default_global_oper_up_rule {
|
|
my ($self, %options) = @_;
|
|
|
|
return '%{opstatus} eq "up" or %{opstatus} eq "inService"';
|
|
}
|
|
|
|
sub default_global_oper_down_rule {
|
|
my ($self, %options) = @_;
|
|
|
|
return '%{opstatus} ne "up" and %{opstatus} ne "inService"';
|
|
}
|
|
|
|
sub default_oid_filter_name {
|
|
my ($self, %options) = @_;
|
|
|
|
return 'atrConnCepGenDescr';
|
|
}
|
|
|
|
sub default_oid_display_name {
|
|
my ($self, %options) = @_;
|
|
|
|
return 'atrConnCepGenDescr';
|
|
}
|
|
|
|
sub set_counters_traffic {
|
|
my ($self, %options) = @_;
|
|
|
|
push @{$self->{maps_counters}->{int}},
|
|
{ label => 'in-cir', filter => 'add_traffic', nlabel => 'interface.traffic.in.cir.bitspersecond', set => {
|
|
key_values => [ { name => 'in_cir', diff => 1 }, { name => 'speed_in'}, { name => 'display' } ],
|
|
per_second => 1,
|
|
closure_custom_calc => $self->can('custom_traffic_calc'), closure_custom_calc_extra_options => { label_ref => 'in_cir' },
|
|
closure_custom_output => $self->can('custom_traffic_output'), output_error_template => 'Traffic In CIR : %s',
|
|
closure_custom_perfdata => $self->can('custom_traffic_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_traffic_threshold'),
|
|
}
|
|
},
|
|
{ label => 'in-eir', filter => 'add_traffic', nlabel => 'interface.traffic.in.eir.bitspersecond', set => {
|
|
key_values => [ { name => 'in_eir', diff => 1 }, { name => 'speed_in'}, { name => 'display' } ],
|
|
per_second => 1,
|
|
closure_custom_calc => $self->can('custom_traffic_calc'), closure_custom_calc_extra_options => { label_ref => 'in_eir' },
|
|
closure_custom_output => $self->can('custom_traffic_output'), output_error_template => 'Traffic In EIR : %s',
|
|
closure_custom_perfdata => $self->can('custom_traffic_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_traffic_threshold'),
|
|
}
|
|
},
|
|
{ label => 'out-cir', filter => 'add_traffic', nlabel => 'interface.traffic.out.cir.bitspersecond', set => {
|
|
key_values => [ { name => 'out_cir', diff => 1 }, { name => 'speed_out'}, { name => 'display' } ],
|
|
per_second => 1,
|
|
closure_custom_calc => $self->can('custom_traffic_calc'), closure_custom_calc_extra_options => { label_ref => 'out_cir' },
|
|
closure_custom_output => $self->can('custom_traffic_output'), output_error_template => 'Traffic Out CIR : %s',
|
|
closure_custom_perfdata => $self->can('custom_traffic_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_traffic_threshold'),
|
|
}
|
|
},
|
|
{ label => 'out-eir', filter => 'add_traffic', nlabel => 'interface.traffic.out.eir.bitspersecond', set => {
|
|
key_values => [ { name => 'out_eir', diff => 1 }, { name => 'speed_out'}, { name => 'display' } ],
|
|
per_second => 1,
|
|
closure_custom_calc => $self->can('custom_traffic_calc'), closure_custom_calc_extra_options => { label_ref => 'out_eir' },
|
|
closure_custom_output => $self->can('custom_traffic_output'), output_error_template => 'Traffic Out EIR : %s',
|
|
closure_custom_perfdata => $self->can('custom_traffic_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_traffic_threshold'),
|
|
}
|
|
},
|
|
;
|
|
}
|
|
|
|
sub set_counters_errors {
|
|
my ($self, %options) = @_;
|
|
|
|
push @{$self->{maps_counters}->{int}},
|
|
{ label => 'in-eir-discard', filter => 'add_errors', nlabel => 'interface.packets.in.eir.discards.count', set => {
|
|
key_values => [ { name => 'in_eir_discard', diff => 1 }, { name => 'speed_in'}, { name => 'display' } ],
|
|
per_second => 1,
|
|
closure_custom_calc => $self->can('custom_traffic_calc'), closure_custom_calc_extra_options => { label_ref => 'in_eir_discard' },
|
|
closure_custom_output => $self->can('custom_traffic_output'), output_error_template => 'Traffic In EIR Discard : %s',
|
|
closure_custom_perfdata => $self->can('custom_traffic_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_traffic_threshold'),
|
|
}
|
|
},
|
|
{ label => 'out-eir-discard', filter => 'add_errors', nlabel => 'interface.packets.out.eir.discards.count', set => {
|
|
key_values => [ { name => 'out_eir_discard', diff => 1 }, { name => 'speed_out'}, { name => 'display' } ],
|
|
per_second => 1,
|
|
closure_custom_calc => $self->can('custom_traffic_calc'), closure_custom_calc_extra_options => { label_ref => 'out_eir_discard' },
|
|
closure_custom_output => $self->can('custom_traffic_output'), output_error_template => 'Traffic Out EIR Discard : %s',
|
|
closure_custom_perfdata => $self->can('custom_traffic_perfdata'),
|
|
closure_custom_threshold_check => $self->can('custom_traffic_threshold'),
|
|
}
|
|
},
|
|
;
|
|
}
|
|
|
|
sub custom_traffic_perfdata {
|
|
my ($self, %options) = @_;
|
|
|
|
my ($warning, $critical);
|
|
if ($self->{instance_mode}->{option_results}->{units_traffic} eq '%' && defined($self->{result_values}->{speed})) {
|
|
$warning = $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{label}, total => $self->{result_values}->{speed}, cast_int => 1);
|
|
$critical = $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{label}, total => $self->{result_values}->{speed}, cast_int => 1);
|
|
} elsif ($self->{instance_mode}->{option_results}->{units_traffic} eq 'b/s') {
|
|
$warning = $self->{perfdata}->get_perfdata_for_output(label => 'warning-' . $self->{label});
|
|
$critical = $self->{perfdata}->get_perfdata_for_output(label => 'critical-' . $self->{label});
|
|
}
|
|
|
|
$self->{output}->perfdata_add(
|
|
label => $self->{result_values}->{label}, unit => 'b/s',
|
|
nlabel => $self->{nlabel},
|
|
instances => $self->use_instances(extra_instance => $options{extra_instance}) ? $self->{result_values}->{display} : undef,
|
|
value => sprintf("%.2f", $self->{result_values}->{traffic_per_seconds}),
|
|
warning => $warning,
|
|
critical => $critical,
|
|
min => 0, max => $self->{result_values}->{speed}
|
|
);
|
|
}
|
|
|
|
sub custom_traffic_threshold {
|
|
my ($self, %options) = @_;
|
|
|
|
my $exit = 'ok';
|
|
if ($self->{instance_mode}->{option_results}->{units_traffic} eq '%' && defined($self->{result_values}->{speed})) {
|
|
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{traffic_prct}, threshold => [ { label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, { label => 'warning-' . $self->{thlabel}, exit_litteral => 'warning' } ]);
|
|
} elsif ($self->{instance_mode}->{option_results}->{units_traffic} eq 'b/s') {
|
|
$exit = $self->{perfdata}->threshold_check(value => $self->{result_values}->{traffic_per_seconds}, threshold => [ { label => 'critical-' . $self->{thlabel}, exit_litteral => 'critical' }, { label => 'warning-' . $self->{thlabel}, exit_litteral => 'warning' } ]);
|
|
}
|
|
return $exit;
|
|
}
|
|
|
|
sub custom_traffic_output {
|
|
my ($self, %options) = @_;
|
|
|
|
my $label = $self->{result_values}->{label};
|
|
$label =~ s/_/ /g;
|
|
$label =~ s/(\w+)/\u$1/g;
|
|
my ($traffic_value, $traffic_unit) = $self->{perfdata}->change_bytes(value => $self->{result_values}->{traffic_per_seconds}, network => 1);
|
|
my $msg = sprintf("Traffic %s : %s/s (%s)",
|
|
$label, $traffic_value . $traffic_unit,
|
|
defined($self->{result_values}->{traffic_prct}) ? sprintf("%.2f%%", $self->{result_values}->{traffic_prct}) : '-');
|
|
return $msg;
|
|
}
|
|
|
|
sub custom_traffic_calc {
|
|
my ($self, %options) = @_;
|
|
|
|
return -10 if (defined($self->{instance_mode}->{last_status}) && $self->{instance_mode}->{last_status} == 0);
|
|
|
|
my $diff_traffic = ($options{new_datas}->{$self->{instance} . '_' . $options{extra_options}->{label_ref}} - $options{old_datas}->{$self->{instance} . '_' . $options{extra_options}->{label_ref}});
|
|
if ($diff_traffic == 0 && !defined($self->{instance_mode}->{option_results}->{no_skipped_counters})) {
|
|
$self->{error_msg} = "skipped";
|
|
return -2;
|
|
}
|
|
|
|
$self->{result_values}->{traffic_per_seconds} = $diff_traffic / $options{delta_time};
|
|
if (defined($options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}}) &&
|
|
$options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}} > 0) {
|
|
$self->{result_values}->{traffic_prct} = $self->{result_values}->{traffic_per_seconds} * 100 / $options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}};
|
|
$self->{result_values}->{speed} = $options{new_datas}->{$self->{instance} . '_speed_' . $options{extra_options}->{label_ref}};
|
|
}
|
|
|
|
$self->{result_values}->{label} = $options{extra_options}->{label_ref};
|
|
$self->{result_values}->{display} = $options{new_datas}->{$self->{instance} . '_display'};
|
|
return 0;
|
|
}
|
|
|
|
sub new {
|
|
my ($class, %options) = @_;
|
|
my $self = $class->SUPER::new(package => __PACKAGE__, %options,
|
|
no_set_traffic => 1, no_set_errors => 1, no_cast => 1);
|
|
bless $self, $class;
|
|
|
|
return $self;
|
|
}
|
|
|
|
sub load_speed {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{speed_loaded} = 1;
|
|
$self->{snmp}->load(oids => [$self->{oid_speed}], instances => $self->{array_interface_selected});
|
|
}
|
|
|
|
sub load_traffic {
|
|
my ($self, %options) = @_;
|
|
|
|
if ($self->{snmp}->is_snmpv1()) {
|
|
$self->{output}->add_option_msg(short_msg => "Can't check SNMP 64 bits counters with SNMPv1.");
|
|
$self->{output}->option_exit();
|
|
}
|
|
|
|
if (!defined($self->{speed_loaded})) {
|
|
$self->set_speed();
|
|
$self->load_speed(%options);
|
|
}
|
|
$self->set_oids_traffic();
|
|
$self->{snmp}->load(oids => [$self->{oid_ing_cir}, $self->{oid_ing_eir},
|
|
$self->{oid_eg_cir}, $self->{oid_eg_eir}], instances => $self->{array_interface_selected});
|
|
}
|
|
|
|
sub load_errors {
|
|
my ($self, %options) = @_;
|
|
|
|
if ($self->{snmp}->is_snmpv1()) {
|
|
$self->{output}->add_option_msg(short_msg => "Can't check SNMP 64 bits counters with SNMPv1.");
|
|
$self->{output}->option_exit();
|
|
}
|
|
if (!defined($self->{speed_loaded})) {
|
|
$self->set_speed();
|
|
$self->load_speed(%options);
|
|
}
|
|
$self->set_oids_errors();
|
|
$self->{snmp}->load(oids => [$self->{oid_ing_eir_discard}, $self->{oid_eg_eir_discard}], instances => $self->{array_interface_selected});
|
|
}
|
|
|
|
sub add_result_speed {
|
|
my ($self, %options) = @_;
|
|
|
|
return if (defined($self->{int}->{$options{instance}}->{speed_in}));
|
|
$self->{int}->{$options{instance}}->{speed_in} = 0;
|
|
$self->{int}->{$options{instance}}->{speed_out} = 0;
|
|
if ($self->{get_speed} == 0) {
|
|
if (defined($self->{option_results}->{speed}) && $self->{option_results}->{speed} ne '') {
|
|
$self->{int}->{$options{instance}}->{speed_in} = $self->{option_results}->{speed} * 1000000;
|
|
$self->{int}->{$options{instance}}->{speed_out} = $self->{option_results}->{speed} * 1000000;
|
|
}
|
|
$self->{int}->{$options{instance}}->{speed_in} = $self->{option_results}->{speed_in} * 1000000 if (defined($self->{option_results}->{speed_in}) && $self->{option_results}->{speed_in} ne '');
|
|
$self->{int}->{$options{instance}}->{speed_out} = $self->{option_results}->{speed_out} * 1000000 if (defined($self->{option_results}->{speed_out}) && $self->{option_results}->{speed_out} ne '');
|
|
} else {
|
|
my $interface_speed = defined($self->{results}->{$self->{oid_speed} . "." . $options{instance}}) ? $self->{results}->{$self->{oid_speed} . "." . $options{instance}} : 0;
|
|
$interface_speed *= 1000;
|
|
$self->{int}->{$options{instance}}->{speed_in} = $interface_speed;
|
|
$self->{int}->{$options{instance}}->{speed_out} = $interface_speed;
|
|
$self->{int}->{$options{instance}}->{speed_in} = $self->{option_results}->{speed_in} * 1000000 if (defined($self->{option_results}->{speed_in}) && $self->{option_results}->{speed_in} ne '');
|
|
$self->{int}->{$options{instance}}->{speed_out} = $self->{option_results}->{speed_out} * 1000000 if (defined($self->{option_results}->{speed_out}) && $self->{option_results}->{speed_out} ne '');
|
|
}
|
|
}
|
|
|
|
sub add_result_errors {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{int}->{$options{instance}}->{in_eir_discard} = $self->{results}->{$self->{oid_ing_eir_discard} . '.' . $options{instance}} * 8;
|
|
$self->{int}->{$options{instance}}->{out_eir_discard} = $self->{results}->{$self->{oid_eg_eir_discard} . '.' . $options{instance}} * 8;
|
|
$self->add_result_speed(%options);
|
|
}
|
|
|
|
sub add_result_traffic {
|
|
my ($self, %options) = @_;
|
|
|
|
$self->{int}->{$options{instance}}->{in_cir} = $self->{results}->{$self->{oid_ing_cir} . '.' . $options{instance}} * 8;
|
|
$self->{int}->{$options{instance}}->{in_eir} = $self->{results}->{$self->{oid_ing_eir} . '.' . $options{instance}} * 8;
|
|
$self->{int}->{$options{instance}}->{out_cir} = $self->{results}->{$self->{oid_eg_cir} . '.' . $options{instance}} * 8;
|
|
$self->{int}->{$options{instance}}->{out_eir} = $self->{results}->{$self->{oid_eg_eir} . '.' . $options{instance}} * 8;
|
|
$self->add_result_speed(%options);
|
|
}
|
|
|
|
1;
|
|
|
|
__END__
|
|
|
|
=head1 MODE
|
|
|
|
Check connections (A-Series.mib).
|
|
|
|
=over 8
|
|
|
|
=item B<--add-status>
|
|
|
|
Check interface status (By default if no --add-* option is set).
|
|
|
|
=item B<--add-traffic>
|
|
|
|
Check interface traffic.
|
|
|
|
=item B<--add-errors>
|
|
|
|
Check interface errors.
|
|
|
|
=item B<--warning-status>
|
|
|
|
Set warning threshold for status.
|
|
Can used special variables like: %{admstatus}, %{opstatus}, %{display}
|
|
|
|
=item B<--critical-status>
|
|
|
|
Set critical threshold for status.
|
|
Default (depends of the atrica release):
|
|
'%{admstatus} eq "on" and %{opstatus} ne "inService"'
|
|
'%{admstatus} eq "up" and %{opstatus} ne "up"'
|
|
Can used special variables like: %{admstatus}, %{opstatus}, %{display}
|
|
|
|
=item B<--warning-*>
|
|
|
|
Threshold warning.
|
|
Can be: 'in-cir', 'in-eir', 'out-cir', 'out-eir', 'in-eir-discard', 'out-eir-discard'.
|
|
|
|
=item B<--critical-*>
|
|
|
|
Threshold critical.
|
|
Can be: 'in-cir', 'in-eir', 'out-cir', 'out-eir', 'in-eir-discard', 'out-eir-discard'.
|
|
|
|
=item B<--units-traffic>
|
|
|
|
Units of thresholds for the traffic (Default: '%') ('%', 'b/s').
|
|
|
|
=item B<--units-errors>
|
|
|
|
Units of thresholds for discards (Default: '%') ('%', 'b/s').
|
|
|
|
=item B<--interface>
|
|
|
|
Set the interface (number expected) ex: 1,2,... (empty means 'check all interface').
|
|
|
|
=item B<--name>
|
|
|
|
Allows to use interface name with option --interface instead of interface oid index (Can be a regexp)
|
|
|
|
=item B<--speed>
|
|
|
|
Set interface speed for incoming/outgoing traffic (in Mb).
|
|
|
|
=item B<--speed-in>
|
|
|
|
Set interface speed for incoming traffic (in Mb).
|
|
|
|
=item B<--speed-out>
|
|
|
|
Set interface speed for outgoing traffic (in Mb).
|
|
|
|
=item B<--no-skipped-counters>
|
|
|
|
Don't skip counters when no change.
|
|
|
|
=item B<--reload-cache-time>
|
|
|
|
Time in seconds before reloading cache file (default: 180).
|
|
|
|
=item B<--oid-filter>
|
|
|
|
Choose OID used to filter interface (default: atrConnCepGenDescr) (values: atrConnIngDescr, atrConnCepGenDescr).
|
|
|
|
=item B<--oid-display>
|
|
|
|
Choose OID used to display interface (default: atrConnCepGenDescr) (values: atrConnIngDescr, atrConnCepGenDescr).
|
|
|
|
=item B<--oid-extra-display>
|
|
|
|
Add an OID to display.
|
|
|
|
=item B<--display-transform-src>
|
|
|
|
Regexp src to transform display value.
|
|
|
|
=item B<--display-transform-dst>
|
|
|
|
Regexp dst to transform display value.
|
|
|
|
=item B<--show-cache>
|
|
|
|
Display cache interface datas.
|
|
|
|
=back
|
|
|
|
=cut
|