141 lines
7.2 KiB
Perl
141 lines
7.2 KiB
Perl
#
|
|
# Copyright 2017 Centreon (http://www.centreon.com/)
|
|
#
|
|
# Centreon is a full-fledged industry-strength solution that meets
|
|
# the needs in IT infrastructure and application monitoring for
|
|
# service performance.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
#
|
|
|
|
package centreon::common::sun::snmp::mode::components::entity;
|
|
|
|
use strict;
|
|
use warnings;
|
|
|
|
my %map_class = (
|
|
1 => 'other', 2 => 'unknown', 3 => 'chassis',
|
|
4 => 'backplane', 5 => 'container', 6 => 'powerSupply',
|
|
7 => 'fan', 8 => 'sensor', 9 => 'module',
|
|
10 => 'port', 11 => 'stack',
|
|
);
|
|
my %map_oper_state = (1 => 'disabled', 2 => 'enabled');
|
|
my %map_alarm = (
|
|
1 => 'critical', 2 => 'major', 3 => 'minor', 4 => 'indeterminate',
|
|
5 => 'warning', 6 => 'pending', 7 => 'cleared'
|
|
);
|
|
my %map_sensor_type = (1 => 'other',
|
|
2 => 'unknown', 3 => 'temperature', 4 => 'voltage', 5 => 'current', 6 => 'tachometer',
|
|
7 => 'counter', 8 => 'switch', 9 => 'lock', 10 => 'humidity',
|
|
11 => 'smokeDetection', 12 => 'presence', 13 => 'airFlow');
|
|
my %mapping_units = (
|
|
1 => '', 2 => '',
|
|
3 => 'C', # Degrees C
|
|
4 => 'F', # Degrees F
|
|
5 => 'K', # Degrees K
|
|
6 => 'V', # Volts
|
|
7 => 'A', # Amps,
|
|
8 => 'W', # Watts
|
|
9 => 'Joules', 10 => 'Coulombs', 11 => 'VA', 12 => 'Nits',
|
|
13 => 'Lumens', 14 => 'Lux', 15 => 'Candelas',
|
|
16 => 'kPa', 17 => 'PSI', 18 => 'Newtons',
|
|
19 => 'CFM', 20 => 'rpm',
|
|
21 => 'Hz', # Hertz
|
|
22 => 'Seconds', 23 => 'Minutes', 24 => 'Hours',
|
|
25 => 'Days', 26 => 'Weeks', 27 => 'Mils',
|
|
28 => 'Inches', 29 => 'Feet', 30 => 'Cubic_Inches',
|
|
31 => 'Cubic_Feet', 32 => 'Meters', 33 => 'Cubic_Centimeters',
|
|
34 => 'Cubic_Meters', 35 => 'Liters', 36 => 'Fluid_Ounces',
|
|
37 => 'Radians', 38 => 'Steradians', 39 => 'Revolutions',
|
|
40 => 'Cycles', 41 => 'Gravities', 42 => 'Ounces',
|
|
43 => 'Pounds', 44 => 'Foot_Pounds', 45 => 'Ounce_Inches',
|
|
46 => 'Gauss', 47 => 'Gilberts', 48 => 'Henries',
|
|
49 => 'Farads', 50 => 'Ohms', 51 => 'Siemens',
|
|
52 => 'Moles', 53 => 'Becquerels', 54 => 'PPM',
|
|
55 => 'Decibels', 56 => 'DbA', 57 => 'DbC',
|
|
58 => 'Grays', 59 => 'Sieverts', 60 => 'Color_Temperature_Degrees_K',
|
|
61 => 'b', # bits
|
|
62 => 'B', # Bytes
|
|
63 => 'Words', 64 => 'DoubleWords', 65 => 'QuadWords',
|
|
66 => '%', # Percentage,
|
|
67 => 'Pascals',
|
|
);
|
|
|
|
my $mapping = {
|
|
entPhysicalClass => { oid => '.1.3.6.1.2.1.47.1.1.1.1.5', map => \%map_class },
|
|
entPhysicalName => { oid => '.1.3.6.1.2.1.47.1.1.1.1.7' },
|
|
sunPlatEquipmentOperationalState => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.2.1.2', map => \%map_oper_state },
|
|
sunPlatEquipmentAlarmStatus => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.2.1.3', map => \%map_alarm },
|
|
sunPlatSensorType => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.6.1.2', map => \%map_sensor_type },
|
|
sunPlatNumericSensorBaseUnits => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.8.1.1', map => \%mapping_units },
|
|
sunPlatNumericSensorExponent => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.8.1.2' },
|
|
sunPlatNumericSensorCurrent => { oid => '.1.3.6.1.4.1.42.2.70.101.1.1.8.1.4' },
|
|
};
|
|
my $oid_sunPlatEquipmentEntry = '.1.3.6.1.4.1.42.2.70.101.1.1.2.1';
|
|
my $oid_sunPlatNumericSensorEntry = '.1.3.6.1.4.1.42.2.70.101.1.1.8.1';
|
|
|
|
sub load {
|
|
my ($self) = @_;
|
|
|
|
push @{$self->{request}}, { oid => $mapping->{entPhysicalName}->{oid} }, { oid => $mapping->{entPhysicalClass}->{oid} },
|
|
{ oid => $oid_sunPlatEquipmentEntry }, { oid => $oid_sunPlatNumericSensorEntry },
|
|
{ oid => $mapping->{sunPlatSensorType}->{oid} };
|
|
}
|
|
|
|
sub check {
|
|
my ($self) = @_;
|
|
|
|
$self->{output}->output_add(long_msg => "Checking entities");
|
|
$self->{components}->{entity} = {name => 'entity', total => 0, skip => 0};
|
|
return if ($self->check_filter(section => 'entity'));
|
|
|
|
my ($exit, $warn, $crit, $checked);
|
|
foreach my $oid ($self->{snmp}->oid_lex_sort(keys %{$self->{results}})) {
|
|
next if ($oid !~ /^$mapping->{entPhysicalName}->{oid}\.(.*)$/);
|
|
my $instance = $1;
|
|
my $result = $self->{snmp}->map_instance(mapping => $mapping, results => $self->{results}, instance => $instance);
|
|
|
|
next if ($self->check_filter(section => 'entity', instance => $result->{entPhysicalClass} . '.' . $instance));
|
|
next if ($result->{sunPlatEquipmentOperationalState} eq 'disabled');
|
|
|
|
if (defined($result->{sunPlatNumericSensorCurrent})) {
|
|
$result->{sunPlatNumericSensorCurrent} *= 10 ** $result->{sunPlatNumericSensorExponent}
|
|
}
|
|
|
|
$self->{components}->{entity}->{total}++;
|
|
$self->{output}->output_add(long_msg => sprintf("%s '%s' status is '%s' [instance = %s, value = %s]",
|
|
$result->{entPhysicalClass}, $result->{entPhysicalName},
|
|
$result->{sunPlatEquipmentAlarmStatus}, $result->{entPhysicalClass} . '.' . $instance,
|
|
defined($result->{sunPlatNumericSensorCurrent}) ? $result->{sunPlatNumericSensorCurrent} : '-'));
|
|
$exit = $self->get_severity(label => 'default', section => 'entity', instance => $result->{entPhysicalClass} . '.' . $instance, value => $result->{sunPlatEquipmentAlarmStatus});
|
|
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
|
|
$self->{output}->output_add(severity => $exit,
|
|
short_msg => sprintf("%s '%s' status is '%s'", $result->{entPhysicalClass}, $result->{entPhysicalName}, $result->{sunPlatEquipmentAlarmStatus}));
|
|
}
|
|
|
|
next if (!defined($result->{sunPlatNumericSensorCurrent}));
|
|
($exit, $warn, $crit, $checked) = $self->get_severity_numeric(section => $result->{sunPlatSensorType}, instance => $result->{entPhysicalClass} . '.' . $instance,, value => $result->{sunPlatNumericSensorCurrent});
|
|
if (!$self->{output}->is_status(value => $exit, compare => 'ok', litteral => 1)) {
|
|
$self->{output}->output_add(severity => $exit,
|
|
short_msg => sprintf("%s '%s' is '%s' %s", $result->{sunPlatSensorType},
|
|
$result->{entPhysicalName}, $result->{sunPlatNumericSensorCurrent}, $result->{sunPlatNumericSensorBaseUnits}));
|
|
}
|
|
$self->{output}->perfdata_add(label => $result->{sunPlatSensorType} . '_' . $result->{entPhysicalName},, unit => $result->{sunPlatNumericSensorBaseUnits},
|
|
value => $result->{sunPlatNumericSensorCurrent},
|
|
warning => $warn,
|
|
critical => $crit
|
|
);
|
|
}
|
|
}
|
|
|
|
1; |