Merge pull request #3154 from aanand/move-ip-docs-to-reference

Move ipv4_address/ipv6_address docs to reference section

docs/compose-file.md

@@ -545,6 +545,38 @@ In the example below, three services are provided (`web`, `worker`, and `db`), a
       new:
       legacy:
 
+#### ipv4_address, ipv6_address
+
+Specify a static IP address for containers for this service when joining the network.
+
+The corresponding network configuration in the [top-level networks section](#network-configuration-reference) must have an `ipam` block with subnet and gateway configurations covering each static address. If IPv6 addressing is desired, the `com.docker.network.enable_ipv6` driver option must be set to `true`.
+
+An example:
+
+    version: '2'
+
+    services:
+      app:
+        image: busybox
+        command: ifconfig
+        networks:
+          app_net:
+            ipv4_address: 172.16.238.10
+            ipv6_address: 2001:3984:3989::10
+
+    networks:
+      app_net:
+        driver: bridge
+        driver_opts:
+          com.docker.network.enable_ipv6: "true"
+        ipam:
+          driver: default
+          config:
+          - subnet: 172.16.238.0/24
+            gateway: 172.16.238.1
+          - subnet: 2001:3984:3989::/64
+            gateway: 2001:3984:3989::1
+
 ### pid
 
     pid: "host"

docs/networking.md

@@ -116,29 +116,7 @@ Here's an example Compose file defining two custom networks. The `proxy` service
           foo: "1"
           bar: "2"
 
-Networks can be configured with static IP addresses by setting the ipv4_address and/or ipv6_address for each attached network. The corresponding `network` section must have an `ipam` config entry with subnet and gateway configurations for each static address. If IPv6 addressing is desired, the `com.docker.network.enable_ipv6` driver option must be set to `true`. An example:
-
-    version: '2'
-
-    services:
-      app:
-        networks:
-          app_net:
-            ipv4_address: 172.16.238.10
-            ipv6_address: 2001:3984:3989::10
-
-    networks:
-      app_net:
-        driver: bridge
-        driver_opts:
-          com.docker.network.enable_ipv6: "true"
-        ipam:
-          driver: default
-          config:
-          - subnet: 172.16.238.0/24
-            gateway: 172.16.238.1
-          - subnet: 2001:3984:3989::/64
-            gateway: 2001:3984:3989::1
+Networks can be configured with static IP addresses by setting the [ipv4_address and/or ipv6_address](compose-file.md#ipv4-address-ipv6-address) for each attached network.
 
 For full details of the network configuration options available, see the following references: