diff --git a/docs/configurations/etc.iptables.rules.v4.sh b/docs/configurations/etc.iptables.rules.v4.sh
index 694b134..599f23d 100644
--- a/docs/configurations/etc.iptables.rules.v4.sh
+++ b/docs/configurations/etc.iptables.rules.v4.sh
@@ -85,11 +85,10 @@ do
     $IPT -A INPUT -p icmp -m icmp --icmp-type 4 -j ACCEPT
     $IPT -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT
 
-    # allow ssh/http/ntp/dhclint only
+    # allow ssh/ntp/dhclint/http/https only
     $IPT -A INPUT -p tcp --dport 22 -m state --state NEW -j ACCEPT
     $IPT -A INPUT -p udp --dport 123 -m state --state NEW -j ACCEPT
     $IPT -A INPUT -p udp --dport 68 -m state --state NEW -j ACCEPT
-    ip6tables -A INPUT -p udp --dport 123 -m state --state NEW -j ACCEPT
 #    $IPT -A INPUT -p tcp --dport 80 -m state --state NEW -j ACCEPT
 #    $IPT -A INPUT -p tcp --dport 443 -m state --state NEW -j ACCEPT
  
diff --git a/docs/configurations/etc.iptables.rules.v6.sh b/docs/configurations/etc.iptables.rules.v6.sh
new file mode 100644
index 0000000..e7bb67b
--- /dev/null
+++ b/docs/configurations/etc.iptables.rules.v6.sh
@@ -0,0 +1,107 @@
+#!/bin/bash
+IPT="/sbin/ip6tables"
+PUB_IFS="ens33"
+if [ $# -lt 1 ]; then
+	echo "Must be set to greater than or equal to a public network interface. usage: $0 eth0, or $0 eth0 eth1"
+	exit 1
+else
+	PUB_IFS="$@"
+	echo "Public interface is $PUB_IFS"
+fi
+
+ echo "Starting IPv6 Wall..."
+ $IPT -F
+ $IPT -X
+ $IPT -t nat -F
+ $IPT -t nat -X
+ $IPT -t mangle -F
+ $IPT -t mangle -X
+ $IPT -N LOGDROP
+ modprobe ip_conntrack
+  
+   
+#unlimited 
+$IPT -A INPUT -i lo -j ACCEPT
+$IPT -A OUTPUT -o lo -j ACCEPT
+# DROP all incomming traffic
+$IPT -P INPUT DROP
+$IPT -P OUTPUT DROP
+$IPT -P FORWARD DROP
+
+$IPT -A INPUT -i lo -j ACCEPT
+$IPT -A OUTPUT -o lo -j ACCEPT
+$IPT -A INPUT -s fe80::/64 -j DROP
+
+$IPT -A OUTPUT -p tcp -m state --state NEW,ESTABLISHED -j ACCEPT
+$IPT -A OUTPUT -p udp -m state --state NEW,ESTABLISHED -j ACCEPT
+$IPT -A OUTPUT -p icmp -m state --state NEW,ESTABLISHED -j ACCEPT
+$IPT -A INPUT -p tcp -m state --state ESTABLISHED -j ACCEPT
+$IPT -A INPUT -p udp -m state --state ESTABLISHED -j ACCEPT
+$IPT -A INPUT -p icmp -m state --state ESTABLISHED -j ACCEPT
+$IPT -A INPUT -p icmp -m state --state RELATED -j ACCEPT
+
+
+$IPT -A INPUT -m limit --limit 3/min -j LOG --log-prefix "SFW2-IN-ILL-TARGET " --log-tcp-options --log-ip-options
+$IPT -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT
+$IPT -A FORWARD -m limit --limit 3/min -j LOG --log-prefix "SFW2-FWD-ILL-ROUTING " --log-tcp-options --log-ip-options
+
+for PUB_IF in $PUB_IFS
+do 
+# sync
+    $IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW  -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Drop Syn"     
+    $IPT -A INPUT -i ${PUB_IF} -p tcp ! --syn -m state --state NEW -j DROP
+           
+# Fragments
+    $IPT -A INPUT -i ${PUB_IF} -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fragments Packets"
+    $IPT -A INPUT -i ${PUB_IF} -j DROP
+            
+             
+# block bad stuff
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL FIN,URG,PSH -j DROP
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL ALL -j DROP
+              
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "NULL Packets"
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL NONE -j DROP # NULL packets
+               
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,RST SYN,RST -j DROP
+                
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "XMAS Packets"
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP #XMAS
+                 
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -m limit --limit 5/m --limit-burst 7 -j LOG --log-level 4 --log-prefix "Fin Packets Scan"
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags FIN,ACK FIN -j DROP # FIN packet scans
+                  
+    $IPT  -A INPUT -i ${PUB_IF} -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j DROP
+                   
+    # No smb/windows sharing packets - too much logging
+    $IPT -A INPUT -p tcp -i ${PUB_IF} --dport 137:139 -j REJECT
+    $IPT -A INPUT -p udp -i ${PUB_IF} --dport 137:139 -j REJECT
+    $IPT -I INPUT -p tcp --dport 22 -i ${PUB_IF} -m state --state NEW -m recent --set
+    $IPT -I INPUT -p tcp --dport 22 -i ${PUB_IF} -m state --state NEW -m recent  --update --seconds 60 --hitcount 4 -j LOGDROP
+ done
+    # Allow full outgoing connection but no incomming stuff
+    $IPT -A INPUT -p ipv6-icmp -m ipv6-icmp  --icmpv6-type 4 -j ACCEPT
+    $IPT -A OUTPUT -p ipv6-icmp -m ipv6-icmp --icmpv6-type 8 -j ACCEPT
+
+    # allow ssh/ntp/dhclint/http/https only
+    $IPT -A INPUT -p tcp --dport 22 -m state --state NEW -j ACCEPT
+    $IPT -A INPUT -p udp --dport 123 -m state --state NEW -j ACCEPT
+    $IPT -A INPUT -d fe80::/64 -p udp -m udp --dport 546 -m conntrack --ctstate NEW -j ACCEPT
+#    $IPT -A INPUT -p tcp --dport 80 -m state --state NEW -j ACCEPT
+#    $IPT -A INPUT -p tcp --dport 443 -m state --state NEW -j ACCEPT
+ 
+    # allow incoming ICMP ping pong stuff
+    $IPT -A INPUT -p ipv6-icmp -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
+    $IPT -A OUTPUT -p ipv6-icmp -m state --state ESTABLISHED,RELATED -j ACCEPT
+     
+    # prevent ssh brute force attack
+    $IPT -A LOGDROP -j LOG
+    $IPT -A LOGDROP -j DROP
+
+# Log everything else
+# *** Required for psad ****
+$IPT -A INPUT -j LOG
+$IPT -A FORWARD -j LOG
+$IPT -A INPUT -j DROP
+ 
+exit 0