Update README.md and README-CN.md

README-CN.md

@@ -154,14 +154,22 @@ EXCEPTIONS=""
 执行如下的命令进行部署:
 ```
 $ INTERFACENAME="your network interfacename(Example eth0)"
-$ sed -i "s/PUB_IFS=.*/PUB_IFS=\"$INTERFACENAME\"/g" docs/configurations/etc.iptables.rules.v4.sh 
-$ sudo bash docs/configurations/etc.iptables.rules.v4.sh 
+$ sudo bash docs/configurations/etc.iptables.rules.v4.sh $INTERFACENAME
 $ sudo -s
 # iptables-save > /etc/iptables/rules.v4 
 # ip6tables-save > /etc/iptables/rules.v6 
 ```
 5) 使用passwd命令改变所有用户的密码，以满足pam_cracklib模块配置的密码复杂度及健壮性。
 
+6) 必须在第一次修复应用后进行修复的项
+```
+8.1.32  因为此项一旦设置，审计规则将不能够再进行添加。
+```
+7） 必须在所有项都修复应用后进行修复的项
+```
+8.4.1  8.4.2 这都是与aide检测文件完整性相关的项，最好是在所有项都修复好后再进行修复，以修复好的系统中的文件进行完整性的数据库的初始化。
+```
+
 ## 特别注意 
 一些检查项需要依赖多次修复，且操作系统需要多次重启。需要进行两次修复的项有： 
 8.1.1.2  

README.md

@@ -169,13 +169,24 @@ Set the corresponding firewall rules according to the applications used. Hardene
 to do the following:
 ```
 $ INTERFACENAME="your network interfacename(Example eth0)"
-$ sed -i "s/PUB_IFS=.*/PUB_IFS=\"$INTERFACENAME\"/g" docs/configurations/etc.iptables.rules.v4.sh 
-$ sudo bash docs/configurations/etc.iptables.rules.v4.sh 
+$ sudo bash docs/configurations/etc.iptables.rules.v4.sh $INTERFACENAME
 $ sudo -s
 # iptables-save > /etc/iptables/rules.v4 
 # ip6tables-save > /etc/iptables/rules.v6 
 ```
 
+5) Use the passwd command to change the passwords of all users to apply the password complexity and robustness of the pam_cracklib module configuration.
+
+6) Items that must be applied after the first application(reboot after is better)
+```
+8.1.32  Because this item is set, the audit rules will not be added. 
+```
+
+7) Items that must be applied after all application is ok
+```
+8.4.1  8.4.2  These are all related to the aide. It is best to fix all the items after they have been fixed to fix the integrity of the database in the system.
+``` 
+
 ### nft format rules:
 [nftables.conf](https://github.com/hardenedlinux/harbian-audit/blob/master/docs/configurations/etc.nftables.conf)
 to do the following(your network interfacename(Example eth0)):

docs/complianced_image/QEMU/how_to_creating_and_making_a_QEMU_img.mkd

@@ -42,14 +42,14 @@ Then follow the wizard to install step by step.
 
 ### Pre-Install  
 ```
-root@harbian:/home/harbian-audit# apt update && apt install -y bc net-tools vim unzip
+root@harbian:/home/harbian-audit# apt update && apt install -y bc net-tools vim unzip pciutils network-manager
 ```
 
 ### Get harbian-audit project 
 ```
 $ cd /opt
 root@harbian:/opt# wget https://github.com/hardenedlinux/harbian-audit/archive/master.zip 
-root@harbian:/opt# sudo unzip master.zip 
+root@harbian:/opt# unzip master.zip 
 root@harbian:/opt# cd harbian-audit-master/ 
 ``` 
 
@@ -59,7 +59,8 @@ root@harbian:/opt# cd harbian-audit-master/
 ```
 root@harbian:/opt/harbian-audit-master# cp debian/default /etc/default/cis-hardening 
 root@harbian:/opt/harbian-audit-master# sed -i "s#CIS_ROOT_DIR=.*#CIS_ROOT_DIR='$(pwd)'#" /etc/default/cis-hardening  
-root@harbian:/opt/harbian-audit-master# ./bin/hardening.sh --audit-all 
+root@harbian:/opt/harbian-audit-master#  bash bin/hardening.sh --init  
+root@harbian:/opt/harbian-audit-master# ./bin/hardening.sh --audit-all  
 root@harbian:/opt/harbian-audit-master# ./bin/hardening.sh --set-hardening-level 5 
 root@harbian:/opt/harbian-audit-master# sed -i 's/^status=.*/status=disabled/' etc/conf.d/7.4.4_hosts_deny.cfg 
 root@harbian:/opt/harbian-audit-master# ./bin/hardening.sh --apply 
@@ -84,7 +85,7 @@ $ sudo sed -i "s/Debian GNU\/Linux 9/harbian-audit complianced for Debian GNU\/L
 
 ### Set grub passwd   
 superusers: harbiansuper   
-passwd: harbian_AUDIT,12@)  
+passwd: harbian_AUDIT,09)(  
 
 Related how to config grub2 password protection, please reference:   
 [how_to_config_grub2_password_protection.mkd](https://github.com/hardenedlinux/harbian-audit/blob/master/docs/configurations/manual-operation-docs/how_to_config_grub2_password_protection.mkd)