apt_extra_opts | **Optional.** Read options from an ini file.
apt_upgrade | **Optional.** [Default] Perform an upgrade. If an optional OPTS argument is provided, apt-get will be run with these command line options instead of the default.
apt_dist_upgrade | **Optional.** Perform a dist-upgrade instead of normal upgrade. Like with -U OPTS can be provided to override the default options.
apt_include | **Optional.** Include only packages matching REGEXP. Can be specified multiple times the values will be combined together.
apt_exclude | **Optional.** Exclude packages matching REGEXP from the list of packages that would otherwise be included. Can be specified multiple times.
apt_critical | **Optional.** If the full package information of any of the upgradable packages match this REGEXP, the plugin will return CRITICAL status. Can be specified multiple times.
apt_timeout | **Optional.** Seconds before plugin times out (default: 10).
breeze_hostname | **Required.** Name or IP address of host to check. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
breeze_community | **Optional.** SNMPv1 community. Defaults to "public".
breeze_warning | **Required.** Percentage strength below which a WARNING status will result. Defaults to 50.
breeze_critical | **Required.** Percentage strength below which a WARNING status will result. Defaults to 20.
by_ssh_command | **Required.** The command that should be executed. Can be an array if multiple arguments should be passed to `check_by_ssh`.
by_ssh_arguments| **Optional.** A dictionary with arguments for the command. This works exactly like the 'arguments' dictionary for ordinary CheckCommands.
clamd_certificate | **Optional.** Minimum number of days a certificate has to be valid. 1st value is number of days for warning, 2nd is critical (if not specified: 0) -- separated by comma.
disk\_group | **Optional.** Group paths. Thresholds apply to (free-)space of all partitions together.
disk\_kilobytes | **Optional.** Same as --units kB. May be true or false.
disk\_local | **Optional.** Only check local filesystems. May be true or false.
disk\_stat\_remote\_fs | **Optional.** Only check local filesystems against thresholds. Yet call stat on remote filesystems to test if they are accessible (e.g. to detect Stale NFS Handles). May be true or false.
disk\_mountpoint | **Optional.** Display the mountpoint instead of the partition. May be true or false.
disk\_megabytes | **Optional.** Same as --units MB. May be true or false.
disk\_all | **Optional.** Explicitly select all paths. This is equivalent to -R '.\*'. May be true or false.
disk\_eregi\_path | **Optional.** Case insensitive regular expression for path/partition. Multiple regular expression strings must be defined as array.
disk\_ereg\_path | **Optional.** Regular expression for path or partition. Multiple regular expression strings must be defined as array.
disk\_ignore\_eregi\_path | **Optional.** Regular expression to ignore selected path/partition (case insensitive). Multiple regular expression strings must be defined as array.
disk\_ignore\_ereg\_path | **Optional.** Regular expression to ignore selected path or partition. Multiple regular expression strings must be defined as array.
disk\_timeout | **Optional.** Seconds before connection times out (default: 10).
disk\_exclude\_type | **Optional.** Ignore all filesystems of indicated type. Multiple regular expression strings must be defined as array. Defaults to "none", "tmpfs", "sysfs", "proc", "devtmpfs", "devfs", "mtmfs", "tracefs", "cgroup", "fuse.gvfsd-fuse", "fuse.gvfs-fuse-daemon", "fdescfs".
ftp_certificate | **Optional.** Minimum number of days a certificate has to be valid. 1st value is number of days for warning, 2nd is critical (if not specified: 0) -- separated by comma.
http_proxy_auth_pair | **Optional.** Add 'username:password' authorization pair for proxy.
http_ignore_body | **Optional.** Don't download the body, just the headers.
http_linespan | **Optional.** Allow regex to span newline.
http_expect_body_regex | **Optional.** A regular expression which the body must match against. Incompatible with http_ignore_body.
http_expect_body_eregi | **Optional.** A case-insensitive expression which the body must match against. Incompatible with http_ignore_body.
http_invertregex | **Optional.** Changes behaviour of http_expect_body_regex and http_expect_body_eregi to return CRITICAL if found, OK if not.
http_warn_time | **Optional.** The warning threshold.
http_critical_time | **Optional.** The critical threshold.
http_expect | **Optional.** Comma-delimited list of strings, at least one of them is expected in the first (status) line of the server response. Default: HTTP/1.
http_certificate | **Optional.** Minimum number of days a certificate has to be valid. This parameter explicitely sets the port to 443 and ignores the URL if passed.
http_maxage | **Optional.** Warn if document is more than seconds old.
http_contenttype | **Optional.** Specify Content-Type header when POSTing.
http_useragent | **Optional.** String to be sent in http header as User Agent.
http_header | **Optional.** Any other tags to be sent in http header.
http_extendedperfdata | **Optional.** Print additional perfdata. Defaults to false.
http_onredirect | **Optional.** How to handle redirect pages. Possible values: "ok" (default), "warning", "critical", "follow", "sticky" (like follow but stick to address), "stickyport" (like sticky but also to port)
imap_escape | **Optional.** Can use \\n, \\r, \\t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \\r\\n added to end of quit.
ldap_address | **Optional.** Host name, IP Address, or unix socket (must be an absolute path). Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
ldap_port | **Optional.** Port number. Defaults to 389.
ldap_attr | **Optional.** LDAP attribute to search for (default: "(objectclass=*)"
ldap_base | **Required.** LDAP base (eg. ou=myunit,o=myorg,c=at).
pop_escape | **Optional.** Can use \\n, \\r, \\t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \\r\\n added to end of quit.
simap_escape | **Optional.** Can use \\n, \\r, \\t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \\r\\n added to end of quit.
spop_escape | **Optional.** Can use \\n, \\r, \\t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \\r\\n added to end of quit.
ssl_port | **Required.** The port that should be checked.
ssl_timeout | **Optional.** Timeout in seconds for the connect and handshake. The plugin default is 10 seconds.
ssl_cert_valid_days_warn | **Optional.** Warning threshold for days before the certificate will expire. When used, ssl_cert_valid_days_critical must also be set.
ssl_cert_valid_days_critical | **Optional.** Critical threshold for days before the certificate will expire. When used, ssl_cert_valid_days_warn must also be set.
ssmtp_escape | **Optional.** Can use \\n, \\r, \\t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \\r\\n added to end of quit.
swap_wfree | **Optional.** The free swap space warning threshold in % (enable `swap_integer` for number values). Defaults to `50%`.
swap_cfree | **Optional.** The free swap space critical threshold in % (enable `swap_integer` for number values). Defaults to `25%`.
swap_integer | **Optional.** Specifies whether the thresholds are passed as number or percent value. Defaults to false (percent values).
swap_allswaps | **Optional.** Conduct comparisons for all swap partitions, one by one. Defaults to false.
swap_noswap | **Optional.** Resulting state when there is no swap regardless of thresholds. Possible values are "ok", "warning", "critical", "unknown". Defaults to "critical".
tcp_certificate | **Optional.** Minimum number of days a certificate has to be valid. 1st value is number of days for warning, 2nd is critical (if not specified: 0) -- separated by comma.
ups_address | **Required.** The address of the host running upsd. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
ups_name | **Required.** The UPS name. Defaults to `ups`.
ups_port | **Optional.** The port to which to connect. Defaults to 3493.
ups_variable | **Optional.** The variable to monitor. Must be one of LINE, TEMP, BATTPCT or LOADPCT. If this is not set, the check only relies on the value of `ups.status`.
ups_warning | **Optional.** The warning threshold for the selected variable.
ups_critical | **Optional.** The critical threshold for the selected variable.
ups_celsius | **Optional.** Display the temperature in degrees Celsius instead of Fahrenheit. Defaults to `false`.
ups_timeout | **Optional.** The number of seconds before the connection times out. Defaults to 10.
To allow a basic monitoring of Windows clients Icinga 2 comes with a set of Windows only plugins. While trying to mirror the functionalities of their linux cousins from the monitoring-plugins package, the differences between Windows and Linux are too big to be able use the same CheckCommands for both systems.
A check-commands-windows.conf comes with Icinga 2, it asumes that the Windows Plugins are installed in the PluginDir set in your constants.conf. To enable them the following include directive is needed in you icinga2.conf:
One of the differences between the Windows plugins and their linux counterparts is that they consistently do not require thresholds to run, functioning like dummies without.
Aggregates the free disk space of all volumes and mount points it can find, or the ones defined in `disk_win_path`. Ignores removable storage like fash drives and discs (CD, DVD etc.).
disk\_win\_warn | **Optional**. The warning threshold.
disk\_win\_crit | **Optional**. The critical threshold.
disk\_win\_path | **Optional**. Check only these paths, default checks all.
disk\_win\_unit | **Optional**. Use this unit to display disk space, thresholds are interpreted in this unit. Defaults to "mb", possible values are: b, kb, mb, gb and tb.
disk\_win\_exclude | **Optional**. Exclude these drives from check.
This plugin collects the inverse of the performance counter `\Processor(_Total)\% Idle Time` two times, with a wait time of one second between the collection. To change this wait time use [`perfmon-windows`](10-icinga-template-library.md#windows-plugins-load-windows).
memory\_win\_warn | **Optional**. The warning threshold.
memory\_win\_crit | **Optional**. The critical threshold.
memory\_win\_unit | **Optional**. The unit to display the received value in, thresholds are interpreted in this unit. Defaults to "mb" (megabye), possible values are: b, kb, mb, gb and tb.
Collects the total Bytes inbount and outbound for all interfaces in one second, to itemise interfaces or use a different collection interval use [`perfmon-windows`](10-icinga-template-library.md#windows-plugins-load-windows).
This plugins allows to collect data from a Performance Counter. After the first data collection a second one is done after `perfmon_win_wait` milliseconds. When you know `perfmon_win_counter` only requires one set of data to provide valid data you can set `perfmon_win_wait` to `0`.
To recieve a list of possible Performance Counter Objects run `check_perfmon.exe --print-objects` and to view an objects instances and counters run `check_perfmon.exe --print-object-info -P "name of object"`
Custom attributes:
Name | Description
:---------------------|:------------
perfmon\_win\_warn | **Optional**. The warning threshold.
perfmon\_win\_crit | **Optional**. The critical threshold.
perfmon\_win\_counter | **Required**. The Performance Counter to use. Ex. `\Processor(_Total)\% Idle Time`.
perfmon\_win\_wait | **Optional**. Time in milliseconds to wait between data collection (default: 1000).
perfmon\_win\_type | **Optional**. Format in which to expect perfomance values. Possible are: long, int64 and double (default).
ping-windows should automaticly detect whether `ping_win_address` is an IPv4 or IPv6 address. If not, use ping4-windows and ping6-windows. Also note that check\_ping.exe waits at least `ping_win_timeout` milliseconds between the pings.
When useing `procs_win_user` this plugins needs adminstratice privileges to access the processes of other users, to just enumerate them no additional privileges are required.
Custom attributes:
Name | Description
:----------------|:------------
procs\_win\_warn | **Optional**. The warning threshold.
procs\_win\_crit | **Optional**. The critical threshold.
procs\_win\_user | **Optional**. Count this useres processes.
This checks thresholds work different since the binary decision whether a service is running or not does not allow for three states. As a default `check_service.exe` will return CRITICAL when `service_win_service` is not running, the `service_win_warn` flag changes this to WARNING.
Custom attributes:
Name | Description
:---------------------|:------------
service\_win\_warn | **Optional**. Warn when service is not running.
service\_win\_service | **Required**. The critical threshold.
Querying Microsoft for Windows updates can take multiple seconds to minutes. An update is treated as important when it has the WSUS flag for SecurityUpdates or CriticalUpdates.
update\_win\_warn | **Optional**. If set, returns warning when important updates are available.
update\_win\_crit | **Optional**. If set, return critical when important updates that require a reboot are available.
update\_win\_reboot | **Optional**. Set to treat 'may need update' as 'definitely needs update'. Please Note that this is true for almost every update and is therefore not recommended.
In contrast to most other plugins, the values of check_update's custom attributes do not set thresholds, but just enable/disable the behaviour described in the table above.
It can be enabled/disabled for example by setting them to "true" or "false", "1" or "0" would also work.
Thresholds will always be "1".
**Hint**: If they are enabled, performance data will be shown in the webinterface.
If run without the optional parameters, the plugin will output critical if any important updates are available.
Uses GetTickCount64 to get the uptime, so boot time is not included.
Custom attributes:
Name | Description
:-----------------|:------------
uptime\_win\_warn | **Optional**. The warning threshold.
uptime\_win\_crit | **Optional**. The critical threshold.
uptime\_win\_unit | **Optional**. The unit to display the received value in, thresholds are interpreted in this unit. Defaults to "s"(seconds), possible values are ms (milliseconds), s, m (minutes), h (hours).
nscp_memory_committed | **Optional.** Check for committed memory, default to false.
nscp_memory_physical | **Optional.** Check for physical memory, default to true.
nscp_memory_free | **Optional.** Switch between checking free (true) or used memory (false), default to false.
nscp_memory_warning | **Optional.** Threshold for WARNING state in percent or absolut (use MB, GB, ...), default to 80 (free=false) or 20 (free=true).
nscp_memory_critical | **Optional.** Threshold for CRITICAL state in percent or absolut (use MB, GB, ...), default to 90 (free=false) or 10 (free=true).
nscp_counter_perfsyntax | **Optional.** Apply performance data label, e.g. `Total Processor Time` to avoid special character problems. Defaults to `nscp_counter_name`.
snmp_authprotocol | **Optional.** SNMP version 3 authentication protocol. Defaults to "md5,des".
snmp_privpass | **Required.** SNMP version 3 priv password. No value defined as default.
snmp_warn | **Optional.** The warning threshold. Change the `snmp_load_type` var to "netsl" for using 3 values.
snmp_crit | **Optional.** The critical threshold. Change the `snmp_load_type` var to "netsl" for using 3 values.
snmp_load_type | **Optional.** Load type. Defaults to "stand". Check all available types in the [snmp load](http://nagios.manubulon.com/snmp_load.html) documentation.
snmp_authprotocol | **Optional.** SNMP version 3 authentication protocol. Defaults to "md5,des".
snmp_privpass | **Required.** SNMP version 3 priv password. No value defined as default.
snmp_warn | **Optional.** The warning threshold.
snmp_crit | **Optional.** The critical threshold.
snmp_storage_name | **Optional.** Storage name. Default to regex "^/$$". More options available in the [snmp storage](http://nagios.manubulon.com/snmp_storage.html) documentation.
snmp_interface_bits_bytes | **Optional.** Output performance data in bits/s or Bytes/s. **Depends** on snmp_interface_kbits set to true. Defaults to true.
snmp_interface_percent | **Optional.** Output performance data in % of max speed. Defaults to false.
snmp_interface_kbits | **Optional.** Make the warning and critical levels in KBits/s. Defaults to true.
snmp_interface_megabytes | **Optional.** Make the warning and critical levels in Mbps or MBps. **Depends** on snmp_interface_kbits set to true. Defaults to true.
snmp_interface_64bit | **Optional.** Use 64 bits counters instead of the standard counters when checking bandwidth & performance data for interface >= 1Gbps. Defaults to false.
snmp_interface_errors | **Optional.** Add error & discard to Perfparse output. Defaults to true.
snmp_interface_noregexp | **Optional.** Do not use regexp to match interface name in description OID. Defaults to false.
snmp_interface_warncrit_percent | **Optional.** Make the warning and critical levels in % of reported interface speed. If set, **snmp_interface_megabytes** needs to be set to false. Defaults to false.
snmp_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
snmp_nocrypt | **Optional.** Define SNMP encryption. If set, **snmp_v3** needs to be set. Defaults to false.
snmp_community | **Optional.** The SNMP community. Defaults to "public".
snmp_port | **Optional.** The SNMP port connection.
snmp_v2 | **Optional.** SNMP version to 2c. Defaults to false.
snmp_v3 | **Optional.** SNMP version to 3. Defaults to false.
snmp_login | **Optional.** SNMP version 3 username. Defaults to "snmpuser".
snmp_password | **Required.** SNMP version 3 password. No value defined as default.
snmp_v3_use_privpass | **Optional.** Define to use SNMP version 3 priv password. Defaults to false.
snmp_v3_use_authprotocol | **Optional.** Define to use SNMP version 3 authentication protocol. Defaults to false.
snmp_authprotocol | **Optional.** SNMP version 3 authentication protocol. Defaults to "md5,des".
snmp_privpass | **Required.** SNMP version 3 priv password. No value defined as default..
snmp_warn | **Optional.** The warning threshold.
snmp_crit | **Optional.** The critical threshold.
snmp_process_name | **Optional.** Name of the process (regexp). No trailing slash!. Defaults to ".*".
snmp_perf | **Optional.** Enable perfdata values. Defaults to true.
snmp_timeout | **Optional.** The command timeout in seconds. Defaults to 5 seconds.
snmp_process_use_params | **Optional.** Add process parameters to process name for regexp matching. Example: "named.*-t /var/named/chroot" will only select named process with this parameter. Defaults to false.
snmp_process_mem_usage | **Optional.** Define to check memory usage for the process. Defaults to false.
snmp_process_mem_threshold | **Optional.** Defines the warning and critical thresholds in Mb when snmp_process_mem_usage set to true. Example "512,1024". Defaults to "0,0".
snmp_process_cpu_usage | **Optional.** Define to check CPU usage for the process. Defaults to false.
snmp_process_cpu_threshold | **Optional.** Defines the warning and critical thresholds in % when snmp_process_cpu_usage set to true. If more than one CPU, value can be > 100% : 100%=1 CPU. Example "15,50". Defaults to "0,0".
db2_health_database | **Required.** The name of the database. (If it was catalogued locally, this parameter is the only you need. Otherwise you must specify database, hostname and port)
db2_health_username | **Optional.** The username for the database connection.
db2_health_password | **Optional.** The password for the database connection.
db2_health_port | **Optional.** The port where DB2 is listening.
db2_health_warning | **Optional.** The warning threshold depending on the mode.
db2_health_critical | **Optional.** The critical threshold depending on the mode.
db2_health_mode | **Required.** The mode uses predefined keywords for the different checks. For example "connection-time", "database-usage" or "sql".
db2_health_method | **Optional.** This tells the plugin how to connect to the database. The only method implemented yet is “dbi” which is the default. (It means, the plugin uses the perl module DBD::DB2).
db2_health_name | **Optional.** The tablespace, datafile, wait event, latch, enqueue depending on the mode or SQL statement to be executed with "db2_health_mode" sql.
db2_health_name2 | **Optional.** If "db2_health_name" is a sql statement, "db2_health_name2" can be used to appear in the output and the performance data.
db2_health_regexp | **Optional.** If set to true, "db2_health_name" will be interpreted as a regular expression. Defaults to false.
db2_health_units | **Optional.** This is used for a better output of mode=sql and for specifying thresholds for mode=tablespace-free. Possible values are "%", "KB", "MB" and "GB".
db2_health_maxinactivity | **Optional.** Used for the maximum amount of time a certain event has not happened.
db2_health_mitigation | **Optional.** Classifies the severity of an offline tablespace.
db2_health_lookback | **Optional.** How many days in the past db2_health check should look back to calculate exitcode.
db2_health_env_db2_home | **Required.** Specifies the location of the db2 client libraries as environment variable `DB2_HOME`. Defaults to "/opt/ibm/db2/V10.5".
db2_health_env_db2_version | **Optional.** Specifies the DB2 version as environment variable `DB2_VERSION`.
mssql_health_method | **Optional.** How the plugin should connect to the database (dbi for the perl module `DBD::Sybase` (default) and `sqlrelay` for the SQLRelay proxy).
mssql_health_name | **Optional.** Depending on the mode this could be the database name or a SQL statement.
mssql_health_name2 | **Optional.** If "mssql_health_name" is a sql statement, "mssql_health_name2" can be used to appear in the output and the performance data.
mssql_health_units | **Optional.** This is used for a better output of mode=sql and for specifying thresholds for mode=tablespace-free. Possible values are "%", "KB", "MB" and "GB".
mysql_health_hostname | **Required.** Specifies the database hostname or address. Defaults to "$address$" or "$address6$" if the `address` attribute is not set.
mysql_health_port | **Optional.** Specifies the database port. Defaults to 3306 (or 1186 for "mysql_health_mode" cluster).
mysql_health_socket | **Optional.** Specifies the database unix socket. No default.
mysql_health_username | **Optional.** The username for the database connection.
mysql_health_password | **Optional.** The password for the database connection.
mysql_health_database | **Optional.** The database to connect to. Defaults to information_schema.
mysql_health_warning | **Optional.** The warning threshold depending on the mode.
mysql_health_critical | **Optional.** The critical threshold depending on the mode.
mysql_health_method | **Optional.** How the plugin should connect to the database (`dbi` for using DBD::Mysql (default), `mysql` for using the mysql-Tool).
mysql_health_units | **Optional.** This is used for a better output of mode=sql and for specifying thresholds for mode=tablespace-free. Possible values are "%", "KB", "MB" and "GB".
mysql_health_labelformat | **Optional.** One of those formats pnp4nagios or groundwork. Defaults to pnp4nagios.
oracle_health_connect | **Required.** Specifies the database connection string (from tnsnames.ora).
oracle_health_username | **Optional.** The username for the database connection.
oracle_health_password | **Optional.** The password for the database connection.
oracle_health_warning | **Optional.** The warning threshold depending on the mode.
oracle_health_critical | **Optional.** The critical threshold depending on the mode.
oracle_health_mode | **Required.** The mode uses predefined keywords for the different checks. For example "connection-time", "flash-recovery-area-usage" or "sql".
oracle_health_method | **Optional.** How the plugin should connect to the database (`dbi` for using DBD::Oracle (default), `sqlplus` for using the sqlplus-Tool).
oracle_health_name | **Optional.** The tablespace, datafile, wait event, latch, enqueue depending on the mode or SQL statement to be executed with "oracle_health_mode" sql.
oracle_health_name2 | **Optional.** If "oracle_health_name" is a sql statement, "oracle_health_name2" can be used to appear in the output and the performance data.
oracle_health_units | **Optional.** This is used for a better output of mode=sql and for specifying thresholds for mode=tablespace-free. Possible values are "%", "KB", "MB" and "GB".
ORACLE_HOME | **Required.** Specifies the location of the oracle instant client libraries. Defaults to "/usr/lib/oracle/11.2/client64/lib". Can be overridden by setting "oracle_home".
TNS_ADMIN | **Required.** Specifies the location of the tnsnames.ora including the database connection strings. Defaults to "/etc/icinga2/plugin-configs". Can be overridden by setting "oracle_tns_admin".
postgres_host | **Optional.** Specifies the database hostname or address. Defaults to "$address$" or "$address6$" if the `address` attribute is not set. If "postgres_unixsocket" is set to true, falls back to unix socket.
postgres_tempdir | **Optional.** Specify directory for temporary files. The default directory is dependent on the OS. More details [here](https://perldoc.perl.org/File/Spec.html).
elasticsearch_failuredomain | **Optional.** A comma-separated list of ElasticSearch attributes that make up your cluster's failure domain.
elasticsearch_host | **Optional.** Hostname or network address to probe. Defaults to 'localhost'.
elasticsearch_masternodes | **Optional.** Issue a warning if the number of master-eligible nodes in the cluster drops below this number. By default, do not monitor the number of nodes in the cluster.
elasticsearch_port | **Optional.** TCP port to probe. The ElasticSearch API should be listening here. Defaults to 9200.
elasticsearch_prefix | **Optional.** Optional prefix (e.g. 'es') for the ElasticSearch API. Defaults to ''.
elasticsearch_yellowcritical | **Optional.** Instead of issuing a 'warning' for a yellow cluster state, issue a 'critical' alert. Defaults to false.
redis_hostname | **Required.** Hostname or IP Address to check. Defaults to "127.0.0.1".
redis_port | **Optional.** Port number to query. Default to "6379".
redis_database | **Optional.** Database name (usually a number) to query, needed for **redis_query**.
redis_password | **Optional.** Password for Redis authentication. Safer alternative is to put them in a file and use **redis_credentials**.
redis_credentials | **Optional.** Credentials file to read for Redis authentication.
redis_timeout | **Optional.** Allows to set timeout for execution of this plugin.
redis_variables | **Optional.** List of variables from info data to do threshold checks on.
redis_warn | **Optional.** This option can only be used if **redis_variables** is used and the number of values listed here must exactly match number of variables specified.
redis_crit | **Optional.** This option can only be used if **redis_variables** is used and the number of values listed here must exactly match number of variables specified.
redis_perfparse | **Optional.** This should only be used with variables and causes variable data not only to be printed as part of main status line but also as perfparse compatible output. Defaults to false.
redis_perfvars | **Optional.** This allows to list variables which values will go only into perfparse output (and not for threshold checking).
redis_prev_perfdata | **Optional.** If set to true, previous performance data are used to calculate rate of change for counter statistics variables and for proper calculation of hitrate. Defaults to false.
redis_rate_label | **Optional.** Prefix or Suffix label used to create a new variable which has rate of change of another base variable. You can specify PREFIX or SUFFIX or both as one string separated by ",". Default if not specified is suffix "_rate".
redis_response_time | **Optional.** If this is used, plugin will measure and output connection response time in seconds. With **redis_perfparse** this would also be provided on perf variables.
redis_hitrate | **Optional.** Calculates Hitrate and specify values are interpreted as WARNING and CRITICAL thresholds.
redis_memory_utilization | **Optional.** This calculates percent of total memory on system used by redis. Total_memory on server must be specified with **redis_total_memory**. If you specify by itself, the plugin will just output this info. Parameter values are interpreted as WARNING and CRITICAL thresholds.
redis_total_memory | **Optional.** Amount of memory on a system for memory utilization calculation. Use system memory or max_memory setting of redis.
redis_replication_delay | **Optional.** Allows to set threshold on replication delay info.
hpasm_customthresholds | **Optional.** Use custom thresholds for certain temperatures.
hpasm_eventrange | **Optional.** Period of time before critical IML events respecively become warnings or vanish. A range is descibed as a number and a unit (s, m, h, d), e.g. --eventrange 1h/20m.
hpasm_perfdata | **Optional.** Output performance data. If your performance data string becomes too long and is truncated by Nagios, then you can use --perfdata=short instead. This will output temperature tags without location information.
hpasm_username | **Optional.** The securityName for the USM security model (SNMPv3 only).
hpasm_authpassword | **Optional.** The authentication password for SNMPv3.
hpasm_eval-nics | **Optional.** Check network interfaces (and groups). Try it and report me whyt you think about it. I need to build up some know how on this subject. If you get an error and think, it is not justified for your configuration, please tell me about it. (alwasy send the output of "snmpwalk -On .... 1.3.6.1.4.1.232" and a description how you setup your nics and why it is correct opposed to the plugins error message.
icingacli_businessprocess_details | **Optional.** Get details for root cause analysis. Defaults to false.
icingacli_businessprocess_statetype | **Optional.** Define which state type to look at, `soft` or `hard`. Overrides the default value inside the businessprocess module, if configured.
ipmi_sensor_type | **Optional.** Limit sensors to query based on IPMI sensor type. Examples for IPMI sensor types are 'Fan', 'Temperature' and 'Voltage'.
ipmi_sel_type | **Optional.** Limit SEL entries to specific types, run 'ipmi-sel -L' for a list of types. All sensors are populated to the SEL and per default all sensor types are monitored.
ping_address | **Optional.** The address of the IPMI interface. Defaults to "$address$" if the IPMI interface's `address` attribute is set, "$address6$" otherwise.
ping_wrta | **Optional.** The RTA warning threshold in milliseconds. Defaults to 5000.
ping_wpl | **Optional.** The packet loss warning threshold in %. Defaults to 100.
ping_crta | **Optional.** The RTA critical threshold in milliseconds. Defaults to 5000.
ping_cpl | **Optional.** The packet loss critical threshold in %. Defaults to 100.
ping_packets | **Optional.** The number of packets to send. Defaults to 1.
ping_timeout | **Optional.** The plugin timeout in seconds. Defaults to 0 (no timeout).
graphite_units | **Optional.** Adds a text tag to the metric count in the plugin output. Useful to identify the metric units. Doesn't affect data queries.
graphite_message | **Optional.** Text message to output (default: "metric count:").
graphite_zero_on_error | **Optional.** Return 0 on a graphite 500 error.
graphite_link_graph |**Optional.** Add a link in the plugin output, showing a 24h graph for this metric in graphite.
interfacetable_hostquery | **Required.** Specifies the remote host to poll. Defaults to "$address$".
interfacetable_hostdisplay | **Optional.** Specifies the hostname to display in the HTML link. Defaults to "$host.display_name$".
interfacetable_regex | **Optional.** Interface names and property names for some other options will be interpreted as regular expressions. Defaults to false.
interfacetable_outputshort | **Optional.** Reduce the verbosity of the plugin output. Defaults to false.
interfacetable_exclude | **Optional.** Comma separated list of interfaces globally excluded from the monitoring.
interfacetable_include | **Optional.** Comma separated list of interfaces globally included in the monitoring.
interfacetable_aliasmatching | **Optional.** Allow you to specify alias in addition to interface names. Defaults to false.
interfacetable_excludetraffic | **Optional.** Comma separated list of interfaces excluded from traffic checks.
interfacetable_includetraffic | **Optional.** Comma separated list of interfaces included for traffic checks.
interfacetable_warningtraffic | **Optional.** Interface traffic load percentage leading to a warning alert.
interfacetable_criticaltraffic | **Optional.** Interface traffic load percentage leading to a critical alert.
interfacetable_pkt | **Optional.** Add unicast/non-unicast pkt stats for each interface.
interfacetable_trafficwithpkt | **Optional.** Enable traffic calculation using pkt counters instead of octet counters. Useful when using 32-bit counters to track the load on > 1GbE interfaces. Defaults to false.
interfacetable_snmpmaxmsgsize | **Optional.** Size of the SNMP message in octets, usefull in case of too long responses. Be carefull with network filters. Range 484 - 65535. Apply only to netsnmp perl bindings. The default is 1472 octets for UDP/IPv4, 1452 octets for UDP/IPv6, 1460 octets for TCP/IPv4, and 1440 octets for TCP/IPv6.
interfacetable_unixsnmp | **Optional.** Use unix snmp utilities for snmp requests. Defaults to false, which means use the perl bindings.
interfacetable_enableperfdata | **Optional.** Enable port performance data. Defaults to false.
interfacetable_perfdataformat | **Optional.** Define which performance data will be generated. Possible values are "full" (default), "loadonly", "globalonly".
interfacetable_perfdatathreshold | **Optional.** Define which thresholds are printed in the generated performance data. Possible values are "full" (default), "loadonly", "globalonly".
interfacetable_perfdatadir | **Optional.** When specified, the performance data are also written directly to a file, in the specified location.
interfacetable_perfdataservicedesc | **Optional.** Specify additional parameters for output performance data to PNP. Defaults to "$service.name$", only affects **interfacetable_perfdatadir**.
interfacetable_grapher | **Optional.** Specify the used graphing solution. Possible values are "pnp4nagios" (default), "nagiosgrapher", "netwaysgrapherv2" and "ingraph".
interfacetable_grapherurl | **Optional.** Graphing system url. Default depends on **interfacetable_grapher**.
interfacetable_portperfunit | **Optional.** Traffic could be reported in bits (counters) or in bps (calculated value).
interfacetable_nodetype | **Optional.** Specify the node type, for specific information to be printed / specific oids to be used. Possible values: "standard" (default), "cisco", "hp", "netscreen", "netapp", "bigip", "bluecoat", "brocade", "brocade-nos", "nortel", "hpux".
interfacetable_duplex | **Optional.** Add the duplex mode property for each interface in the interface table. Defaults to false.
interfacetable_stp | **Optional.** Add the stp state property for each interface in the interface table. Defaults to false.
interfacetable_vlan | **Optional.** Add the vlan attribution property for each interface in the interface table. Defaults to false. This option is available only for the following nodetypes: "cisco", "hp", "nortel"
interfacetable_noipinfo | **Optional.** Remove the ip information for each interface from the interface table. Defaults to false.
interfacetable_alias | **Optional.** Add the alias information for each interface in the interface table. Defaults to false.
interfacetable_accessmethod | **Optional.** Access method for a shortcut to the host in the HTML page. Format is : <method>[:<target>] Where method can be: ssh, telnet, http or https.
interfacetable_htmltablelinktarget | **Optional.** Specifies the windows or the frame where the [details] link will load the generated html page. Possible values are: "_blank", "_self" (default), "_parent", "_top", or a frame name.
interfacetable_delta | **Optional.** Set the delta used for interface throuput calculation in seconds.
interfacetable_ifs | **Optional.** Input field separator. Defaults to ",".
interfacetable_cache | **Optional.** Define the retention time of the cached data in seconds.
interfacetable_noifloadgradient | **Optional.** Disable color gradient from green over yellow to red for the load percentage. Defaults to false.
interfacetable_nohuman | **Optional.** Do not translate bandwidth usage in human readable format. Defaults to false.
interfacetable_snapshot | **Optional.** Force the plugin to run like if it was the first launch. Defaults to false.
interfacetable_timeout | **Optional.** Define the global timeout limit of the plugin in seconds. Defaults to "15s".
interfacetable_css | **Optional.** Define the css stylesheet used by the generated html files. Possible values are "classic", "icinga", "icinga-alternate1" or "nagiosxi".
interfacetable_config | **Optional.** Specify a config file to load.
interfacetable_noconfigtable | **Optional.** Disable configuration table on the generated HTML page. Defaults to false.
interfacetable_notips | **Optional.** Disable the tips in the generated html tables. Defaults to false.
interfacetable_defaulttablesorting | **Optional.** Default table sorting can be "index" (default) or "name".
interfacetable_tablesplit | **Optional.** Generate multiple interface tables, one per interface type. Defaults to false.
interfacetable_notype | **Optional.** Remove the interface type for each interface. Defaults to false.
nwc_health_hostname | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
nwc_health_mode | **Optional.** The plugin mode. A list of all available modes can be found in the [plugin documentation](https://labs.consol.de/nagios/check_nwc_health/index.html).
nwc_health_timeout | **Optional.** Seconds before plugin times out (default: 15)
nwc_health_blacklist | **Optional.** Blacklist some (missing/failed) components.
nwc_health_port | **Optional.** The SNMP port to use (default: 161).
nwc_health_domain | **Optional.** The transport domain to use (default: udp/ipv4, other possible values: udp6, udp/ipv6, tcp, tcp4, tcp/ipv4, tcp6, tcp/ipv6).
nwc_health_protocol | **Optional.** The SNMP protocol to use (default: 2c, other possibilities: 1,3).
nwc_health_community | **Optional.** SNMP community of the server (SNMP v1/2 only).
nwc_health_username | **Optional.** The securityName for the USM security model (SNMPv3 only).
nwc_health_authpassword | **Optional.** The authentication password for SNMPv3.
nwc_health_contextengineid | **Optional.** The context engine id for SNMPv3 (10 to 64 hex characters).
nwc_health_contextname | **Optional.** The context name for SNMPv3 (empty represents the default context).
nwc_health_name | **Optional.** The name of an interface (ifDescr).
nwc_health_drecksptkdb | **Optional.** This parameter must be used instead of --name, because Devel::ptkdb is stealing the latter from the command line.
nwc_health_alias | **Optional.** The alias name of a 64bit-interface (ifAlias)
nwc_health_regexp | **Optional.** A flag indicating that --name is a regular expression
nwc_health_ifspeedin | **Optional.** Override the ifspeed oid of an interface (only inbound)
nwc_health_ifspeedout | **Optional.** Override the ifspeed oid of an interface (only outbound)
nwc_health_ifspeed | **Optional.** Override the ifspeed oid of an interface
nwc_health_units | **Optional.** One of %, B, KB, MB, GB, Bit, KBi, MBi, GBi. (used for e.g. mode interface-usage)
nwc_health_name2 | **Optional.** The secondary name of a component.
nwc_health_role | **Optional.** The role of this device in a hsrp group (active/standby/listen).
nwc_health_report | **Optional.** Can be used to shorten the output. Possible values are: 'long' (default), 'short' (to shorten if available), or 'html' (to produce some html outputs if available)
nwc_health_lookback | **Optional.** The amount of time you want to look back when calculating average rates. Use it for mode interface-errors or interface-usage. Without --lookback the time between two runs of check_nwc_health is the base for calculations. If you want your checkresult to be based for example on the past hour, use --lookback 3600.
nwc_health_warning | **Optional.** The warning threshold
nwc_health_critical | **Optional.** The critical threshold
nwc_health_warningx | **Optional.** The extended warning thresholds
nwc_health_criticalx | **Optional.** The extended critical thresholds
nwc_health_selectedperfdata | **Optional.** The parameter allows you to limit the list of performance data. It's a perl regexp. Only matching perfdata show up in the output.
nwc_health_morphperfdata | **Optional.** The parameter allows you to change performance data labels. It's a perl regexp and a substitution. --morphperfdata '(.*)ISATAP(.*)'='$1patasi$2'
nwc_health_negate | **Optional.** The parameter allows you to map exit levels, such as warning=critical.
nwc_health_mymodules-dyn-dir | **Optional.** A directory where own extensions can be found.
nwc_health_servertype | **Optional.** The type of the network device: cisco (default). Use it if auto-detection is not possible.
nwc_health_statefilesdir | **Optional.** An alternate directory where the plugin can save files.
nwc_health_oids | **Optional.** A list of oids which are downloaded and written to a cache file. Use it together with --mode oidcache.
nwc_health_offline | **Optional.** The maximum number of seconds since the last update of cache file before it is considered too old.
The [check_mem.pl](https://github.com/justintime/nagios-plugins) plugin checks the
memory usage on linux and unix hosts. It is able to count cache memory as free when
compared to thresholds. More details can be found on [this blog entry]((http://sysadminsjourney.com/content/2009/06/04/new-and-improved-checkmempl-nagios-plugin).
yum_all_updates | **Optional.** Set to true to not distinguish between security and non-security updates, but returns critical for any available update. This may be used if the YUM security plugin is absent or you want to maintain every single package at the latest version. You may want to use **yum_warn_on_any_update** instead of this option. Defaults to false.
yum_warn_on_any_update | **Optional.** Set to true to warn if there are any (non-security) package updates available. Defaults to false.
yum_cache_only | **Optional.** If set to true, plugin runs entirely from cache and does not update the cache when running YUM. Useful if you have `yum makecache` cronned. Defaults to false.
yum_no_warn_on_lock | **Optional.** If set to true, returns OK instead of WARNING when YUM is locked and fails to check for updates due to another instance running. Defaults to false.
yum_no_warn_on_updates | **Optional.** If set to true, returns OK instead of WARNING even when updates are available. The plugin output still shows the number of available updates. Defaults to false.
yum_enablerepo | **Optional.** Explicitly enables a reposity when calling YUM. Can take a comma separated list of repositories. Note that enabling repositories can lead to unexpected results, for example when protected repositories are enabled.
yum_disablerepo | **Optional.** Explicitly disables a reposity when calling YUM. Can take a comma separated list of repositories. Note that enabling repositories can lead to unexpected results, for example when protected repositories are enabled.
yum_installroot | **Optional.** Specifies another installation root directory (for example a chroot).
yum_timeout | **Optional.** Set a timeout in seconds after which the plugin will exit (defaults to 55 seconds).
esxi_hardware_host | **Required.** Specifies the host to monitor. Defaults to "$address$".
esxi_hardware_user | **Required.** Specifies the user for polling. Must be a local user of the root group on the system. Can also be provided as a file path file:/path/to/.passwdfile, then first string of file is used.
esxi_hardware_pass | **Required.** Password of the user. Can also be provided as a file path file:/path/to/.passwdfile, then second string of file is used.
esxi_hardware_vendor | **Optional.** Defines the vendor of the server: "auto", "dell", "hp", "ibm", "intel", "unknown" (default).
esxi_hardware_html | **Optional.** Add web-links to hardware manuals for Dell servers (use your country extension). Only useful with **esxi_hardware_vendor** = dell.
esxi_hardware_ignore | **Optional.** Comma separated list of elements to ignore.
esxi_hardware_perfdata | **Optional.** Add performcedata for graphers like PNP4Nagios to the output. Defaults to false.
esxi_hardware_nopower | **Optional.** Do not collect power performance data, when **esxi_hardware_perfdata** is set to true. Defaults to false.
esxi_hardware_novolts | **Optional.** Do not collect voltage performance data, when **esxi_hardware_perfdata** is set to true. Defaults to false.
esxi_hardware_nocurrent | **Optional.** Do not collect current performance data, when **esxi_hardware_perfdata** is set to true. Defaults to false.
esxi_hardware_notemp | **Optional.** Do not collect temperature performance data, when **esxi_hardware_perfdata** is set to true. Defaults to false.
esxi_hardware_nofan | **Optional.** Do not collect fan performance data, when **esxi_hardware_perfdata** is set to true. Defaults to false.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_subselect | **Optional.** Volume name to be checked the free space.
vmware_gigabyte | **Optional.** Output in GB instead of MB.
vmware_usedspace | **Optional.** Output used space instead of free. Defaults to "false".
vmware_alertonly | **Optional.** List only alerting volumes. Defaults to "false".
vmware_exclude | **Optional.** Blacklist volumes name. No value defined as default.
vmware_include | **Optional.** Whitelist volumes name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_dc_volume_used | **Optional.** Output used space instead of free. Defaults to "true".
vmware_warn | **Optional.** The warning threshold for volumes. Defaults to "80%".
vmware_crit | **Optional.** The critical threshold for volumes. Defaults to "90%".
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
Check command object for the `check_vmware_esx` plugin. List of vmware machines and their power state. BEWARE!! In larger environments systems can cause trouble displaying the informations needed due to the mass of data. Use **vmware_alertonly** to avoid this.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_alertonly | **Optional.** List only alerting VMs. Important here to avoid masses of data.
vmware_exclude | **Optional.** Blacklist VMs name. No value defined as default.
vmware_include | **Optional.** Whitelist VMs name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_alertonly | **Optional.** List only alerting hosts. Important here to avoid masses of data.
vmware_exclude | **Optional.** Blacklist VMware ESX hosts. No value defined as default.
vmware_include | **Optional.** Whitelist VMware ESX hosts. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_alertonly | **Optional.** List only alerting hosts. Important here to avoid masses of data.
vmware_exclude | **Optional.** Blacklist VMware cluster. No value defined as default.
vmware_include | **Optional.** Whitelist VMware cluster. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist issues. No value defined as default.
vmware_include | **Optional.** Whitelist issues. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_poweredonly | **Optional.** List only VMs which are powered on. No value defined as default.
vmware_alertonly | **Optional.** List only alerting VMs. Important here to avoid masses of data.
vmware_exclude | **Optional.** Blacklist VMs. No value defined as default.
vmware_include | **Optional.** Whitelist VMs. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in percent. Defaults to "80%".
vmware_crit | **Optional.** The critical threshold in percent. Defaults to "90%".
Check command object for the `check_vmware_esx` plugin. Percentage of time that the virtual machine was ready, but could not get scheduled to run on the physical CPU. CPU ready time is dependent on the number of virtual machines on the host and their CPU loads. High or growing ready time can be a hint CPU bottlenecks.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
Check command object for the `check_vmware_esx` plugin. CPU time spent in wait state. The wait total includes time spent the CPU idle, CPU swap wait, and CPU I/O wait states. High or growing wait time can be a hint I/O bottlenecks.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
Check command object for the `check_vmware_esx` plugin. Actively used CPU of the host, as a percentage of the total available CPU. Active CPU is approximately equal to the ratio of the used CPU to the available CPU.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in percent. Defaults to "80%".
vmware_crit | **Optional.** The critical threshold in percent. Defaults to "90%".
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in percent. Defaults to "80%".
vmware_crit | **Optional.** The critical threshold in percent. Defaults to "90%".
Check command object for the `check_vmware_esx` plugin. Amount of machine memory used on the host. Consumed memory includes Includes memory used by the Service Console, the VMkernel vSphere services, plus the total consumed metrics for all running virtual machines in MB.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in percent. No value defined as default.
vmware_crit | **Optional.** The critical threshold in percent. No value defined as default.
Check command object for the `check_vmware_esx` plugin. Amount of memory that is used by swap. Sum of memory swapped of all powered on VMs and vSphere services on the host in MB. In case of an error all VMs with their swap used will be displayed.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in percent. No value defined as default.
vmware_crit | **Optional.** The critical threshold in percent. No value defined as default.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in percent. No value defined as default.
vmware_crit | **Optional.** The critical threshold in percent. No value defined as default.
Check command object for the `check_vmware_esx` plugin. The sum of all vmmemctl values in MB for all powered-on virtual machines, plus vSphere services on the host. If the balloon target value is greater than the balloon value, the VMkernel inflates the balloon, causing more virtual machine memory to be reclaimed. If the balloon target value is less than the balloon value, the VMkernel deflates the balloon, which allows the virtual machine to consume additional memory if needed (used by VM memory control driver). In case of an error all VMs with their vmmemctl values will be displayed.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in percent. No value defined as default.
vmware_crit | **Optional.** The critical threshold in percent. No value defined as default.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist NICs. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist expression as regexp.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in KBps(Kilobytes per Second). No value defined as default.
vmware_crit | **Optional.** The critical threshold in KBps(Kilobytes per Second). No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in KBps(Kilobytes per Second). No value defined as default.
vmware_crit | **Optional.** The critical threshold in KBps(Kilobytes per Second). No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold in KBps(Kilobytes per Second). No value defined as default.
vmware_crit | **Optional.** The critical threshold in KBps(Kilobytes per Second). No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist NICs. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist expression as regexp.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_subselect | **Optional.** Volume name to be checked the free space.
vmware_gigabyte | **Optional.** Output in GB instead of MB.
vmware_usedspace | **Optional.** Output used space instead of free. Defaults to "false".
vmware_alertonly | **Optional.** List only alerting volumes. Defaults to "false".
vmware_exclude | **Optional.** Blacklist volumes name. No value defined as default.
vmware_include | **Optional.** Whitelist volumes name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_warn | **Optional.** The warning threshold for volumes. Defaults to "80%".
vmware_crit | **Optional.** The critical threshold for volumes. Defaults to "90%".
vmware_spaceleft | **Optional.** This has to be used in conjunction with thresholds as mentioned above.
Check command object for the `check_vmware_esx` plugin. Shows all disk io info. Without subselect no thresholds can be given. All I/O values are aggregated from historical intervals over the past 24 hours with a 5 minute sample rate.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. Average amount of time (ms) to process a SCSI read command issued from the Guest OS to the virtual machine.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. Average amount of time (ms) taken to process a SCSI write command issued by the Guest OS to the virtual machine.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. Aggregated disk I/O rate. For hosts, this metric includes the rates for all virtual machines running on the host.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. Average amount of time (ms) taken during the collection interval to process a SCSI command issued by the guest OS to the virtual machine. The sum of kernelWriteLatency and deviceWriteLatency.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. List vm's with attached host mounted media like cd,dvd or floppy drives. This is important for monitoring because a virtual machine with a mount cd or dvd drive can not be moved to another host.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist VMs name. No value defined as default.
vmware_include | **Optional.** Whitelist VMs name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist services name. No value defined as default.
vmware_include | **Optional.** Whitelist services name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
Check command object for the `check_vmware_esx` plugin. Shows runtime info: VMs, overall status, connection state, health, storagehealth, temperature and sensor are represented as one value and without thresholds.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist VMs name. No value defined as default.
vmware_include | **Optional.** Whitelist VMs name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist status name. No value defined as default.
vmware_include | **Optional.** Whitelist status name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist status name. No value defined as default.
vmware_include | **Optional.** Whitelist status name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
Check command object for the `check_vmware_esx` plugin. This is to avoid a double alarm if you use **vmware-esx-soap-host-runtime-health** and **vmware-esx-soap-host-runtime-storagehealth**.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist status name. No value defined as default.
vmware_include | **Optional.** Whitelist status name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist storage name. No value defined as default.
vmware_include | **Optional.** Whitelist storage name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist sensor name. No value defined as default.
vmware_include | **Optional.** Whitelist sensor name. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist configuration issues. No value defined as default.
vmware_include | **Optional.** Whitelist configuration issues. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist adapters, luns and paths. No value defined as default.
vmware_include | **Optional.** Whitelist adapters, luns and paths. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist adapters. No value defined as default.
vmware_include | **Optional.** Whitelist adapters. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
Check command object for the `check_vmware_esx` plugin. List SCSI logical units. The listing will include: LUN, canonical name of the disc, all of displayed name which is not part of the canonical name and status.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_exclude | **Optional.** Blacklist luns. No value defined as default.
vmware_include | **Optional.** Whitelist luns. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_alertonly | **Optional.** List only alerting units. Important here to avoid masses of data. Defaults to "false".
vmware_exclude | **Optional.** Blacklist paths. No value defined as default.
vmware_include | **Optional.** Whitelist paths. No value defined as default.
vmware_isregexp | **Optional.** Treat blacklist and whitelist expressions as regexp.
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
Check command object for the `check_vmware_esx` plugin. Percentage of time that the virtual machine was ready, but could not get scheduled to run on the physical CPU.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. CPU time spent in wait state. The wait total includes time spent the CPU idle, CPU swap wait, and CPU I/O wait states. High or growing wait time can be a hint I/O bottlenecks.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. Amount of actively used virtual CPU, as a percentage of total available CPU. This is the host's view of the CPU usage, not the guest operating system view. It is the average CPU utilization over all available virtual CPUs in the virtual machine.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** Warning threshold in percent. Defaults to "80%".
vmware_crit | **Optional.** Critical threshold in percent. Defaults to "90%".
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** Warning threshold in percent. Defaults to "80%".
vmware_crit | **Optional.** Critical threshold in percent. Defaults to "90%".
Check command object for the `check_vmware_esx` plugin. Amount of guest physical memory in MB consumed by the virtual machine for guest memory. Consumed memory does not include overhead memory. It includes shared memory and memory that might be reserved, but not actually used. Use this metric for charge-back purposes.<br>
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. Amount of guest physical memory that is currently reclaimed from the virtual machine through ballooning. This is the amount of guest physical memory that has been allocated and pinned by the balloon driver.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
Check command object for the `check_vmware_esx` plugin. SShows all disk io info. Without subselect no thresholds can be given. All I/O values are aggregated from historical intervals over the past 24 hours with a 5 minute sample rate.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_nosession | **Optional.** No auth session - IT SHOULD BE USED FOR TESTING PURPOSES ONLY!. Defaults to "false".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_warn | **Optional.** The warning threshold. No value defined as default.
vmware_crit | **Optional.** The critical threshold. No value defined as default.
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_sslport | **Optional.** SSL port connection. Defaults to "443".
vmware_ignoreunknown | **Optional.** Sometimes 3 (unknown) is returned from a component. But the check itself is ok. With this option the plugin will return OK (0) instead of UNKNOWN (3). Defaults to "false".
vmware_ignorewarning | **Optional.** Sometimes 2 (warning) is returned from a component. But the check itself is ok (from an operator view). With this option the plugin will return OK (0) instead of WARNING (1). Defaults to "false".
vmware_timeout | **Optional.** Seconds before plugin times out. Defaults to "90".
vmware_trace | **Optional.** Set verbosity level of vSphere API request/respond trace.
vmware_sessionfile | **Optional.** Session file name enhancement.
vmware_sessionfiledir | **Optional.** Path to store the **vmware_sessionfile** file. Defaults to "/var/spool/icinga2/tmp".
vmware_username | **Optional.** The username to connect to Host or vCenter server. No value defined as default.
vmware_password | **Optional.** The username's password. No value defined as default.
vmware_authfile | **Optional.** Use auth file instead username/password to session connect. No effect if **vmware_username** and **vmware_password** are defined <br>**Autentication file content:**<br> username=vmuser <br> password=p@ssw0rd
vmware_multiline | **Optional.** Multiline output in overview. This mean technically that a multiline output uses a HTML **\<br\>** for the GUI. No value defined as default.
webinject_config_file | **Optional.** There is a configuration file named 'config.xml' that is used to store configuration settings for your project. You can use this to specify which test case files to run and to set some constants and settings to be used by WebInject.
webinject_output | **Optional.** This option is followed by a directory name or a prefix to prepended to the output files. This is used to specify the location for writing output files (http.log, results.html, and results.xml). If a directory name is supplied (use either an absolute or relative path and make sure to add the trailing slash), all output files are written to this directory. If the trailing slash is ommitted, it is assumed to a prefix and this will be prepended to the output files. You may also use a combination of a directory and prefix.
webinject_no_output | **Optional.** Suppresses all output to STDOUT except the results summary.
webinject_timeout | **Optional.** The value [given in seconds] will be compared to the global time elapsed to run all the tests. If the tests have all been successful, but have taken more time than the 'globaltimeout' value, a warning message is sent back to Icinga.
webinject_report_type | **Optional.** This setting is used to enable output formatting that is compatible for use with specific external programs. The available values you can set this to are: nagios, mrtg, external and standard.
webinject_testcase_file | **Optional.** When you launch WebInject in console mode, you can optionally supply an argument for a testcase file to run. It will look for this file in the directory that webinject.pl resides in. If no filename is passed from the command line, it will look in config.xml for testcasefile declarations. If no files are specified, it will look for a default file named 'testcases.xml' in the current [webinject] directory. If none of these are found, the engine will stop and give you an error.
jmx4perl_url | **Required.** URL to agent web application. Defaults to "http://$address$:8080/jolokia".
jmx4perl_product | **Optional.** Name of app server product (e.g. jboss), by default is uses an autodetection facility.
jmx4perl_alias | **Optional.** Alias name for attribute (e.g. MEMORY_HEAP_USED). All availables aliases can be viewed by executing `jmx4perl aliases` on the command line.
jmx4perl_mbean | **Optional.** MBean name (e.g. java.lang:type=Memory).
jmx4perl_attribute | **Optional.** Attribute name (e.g. HeapMemoryUsage).
jmx4perl_operation | **Optional.** Operation to execute.
jmx4perl_value | **Optional.** Shortcut for specifying mbean/attribute/path. Slashes within names must be escaped with backslash.
jmx4perl_delta | **Optional.** Switches on incremental mode. Optional argument are seconds used for normalizing.
jmx4perl_path | **Optional.** Inner path for extracting a single value from a complex attribute or return value (e.g. used).
jmx4perl_target | **Optional.** JSR-160 Service URL specifing the target server.
jmx4perl_target_user | **Optional.** Username to use for JSR-160 connection.
jmx4perl_target_password | **Optional.** Password to use for JSR-160 connection.
jmx4perl_proxy | **Optional.** Proxy to use.
jmx4perl_user | **Optional.** User for HTTP authentication.
jmx4perl_password | **Optional.** Password for HTTP authentication.
jmx4perl_name | **Optional.** Name to use for output, by default a standard value based on the MBean and attribute will be used.
jmx4perl_method | **Optional.** HTTP method to use, either get or post. By default a method is determined automatically based on the request type.
jmx4perl_base | **Optional.** Base name, which when given, interprets critical and warning values as relative in the range 0 .. 100%. Must be given in the form mbean/attribute/path.
jmx4perl_base_mbean | **Optional.** Base MBean name, interprets critical and warning values as relative in the range 0 .. 100%. Requires "jmx4perl_base_attribute".
jmx4perl_base_attribute | **Optional.** Base attribute for a relative check. Requires "jmx4perl_base_mbean".
jmx4perl_base_path | **Optional.** Base path for relative checks, where this path is used on the base attribute's value.
jmx4perl_unit | **Optional.** Unit of measurement of the data retreived. Recognized values are [B\|KB\|MN\|GB\|TB] for memory values and [us\|ms\|s\|m\|h\|d] for time values.
jmx4perl_null | **Optional.** Value which should be used in case of a null return value of an operation or attribute. Defaults to null.
jmx4perl_string | **Optional.** Force string comparison for critical and warning checks. Defaults to false.
jmx4perl_numeric | **Optional.** Force numeric comparison for critical and warning checks. Defaults to false.
jmx4perl_critical | **Optional.** Critical threshold for value.
jmx4perl_warning | **Optional.** Warning threshold for value.
jmx4perl_label | **Optional.** Label to be used for printing out the result of the check. For placeholders which can be used see the documentation.
jmx4perl_perfdata | **Optional.** Whether performance data should be omitted, which are included by default. Defaults to "on" for numeric values, to "off" for strings.
jmx4perl_unknown_is_critical | **Optional.** Map UNKNOWN errors to errors with a CRITICAL status. Defaults to false.
jmx4perl_timeout | **Optional.** Seconds before plugin times out. Defaults to "15".
jmx4perl_config | **Optional.** Path to configuration file.
jmx4perl_server | **Optional.** Symbolic name of server url to use, which needs to be configured in the configuration file.
jmx4perl_check | **Optional.** Name of a check configuration as defined in the configuration file, use array if you need arguments.
squid_hostname | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
squid_data | **Optional.** Data to fetch (default: Connections) available data: Connections Cache Resources Memory FileDescriptors.
squid_port | **Optional.** Port number (default: 3128).
squid_user | **Optional.** WWW user
squid_password | **Optional.** WWW password
squid_warning | **Optional.** Warning threshold. See http://nagiosplug.sourceforge.net/developer-guidelines.html#THRESHOLDFORMAT for the threshold format.
squid_critical | **Optional.** Critical threshold. See http://nagiosplug.sourceforge.net/developer-guidelines.html#THRESHOLDFORMAT for the threshold format.
squid_client | **Optional.** Path of squidclient (default: /usr/bin/squidclient).
squid_timeout | **Optional.** Seconds before plugin times out (default: 15).
nginx_status_url | **Optional.** URL to use, instead of the default (http://`nginx_status_hostname`/nginx_status).
nginx_status_servername | **Optional.** ServerName to use if you specified an IP to match the good Virtualhost in your target
nginx_status_ssl | **Optional.** set to use ssl connection
nginx_status_disable_sslverify | **Optional.** set to disable SSL hostname verification
nginx_status_user | **Optional.** Username for basic auth
nginx_status_pass | **Optional.** Password for basic auth
nginx_status_realm | **Optional.** Realm for basic auth
nginx_status_maxreach | **Optional.** Number of max processes reached (since last check) that should trigger an alert
nginx_status_timeout | **Optional.** timeout in seconds
nginx_status_warn | **Optional.** Warning threshold (number of active connections, ReqPerSec or ConnPerSec that will cause a WARNING) like '10000,100,200'.
nginx_status_critical | **Optional.** Critical threshold (number of active connections, ReqPerSec or ConnPerSec that will cause a CRITICAL) like '20000,200,300'.
apache_status_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, `address6` otherwise.
apache_status_port | **Optional.** the http port.
apache_status_url | **Optional.** URL to use, instead of the default (http://`apache_status_address`/server-status).
apache_status_ssl | **Optional.** set to use ssl connection
apache_status_timeout | **Optional.** timeout in seconds
apache_status_warning | **Optional.** Warning threshold (number of open slots, busy workers and idle workers that will cause a WARNING) like ':20,50,:50'.
apache_status_critical | **Optional.** Critical threshold (number of open slots, busy workers and idle workers that will cause a CRITICAL) like ':10,25,:20'.
rbl_hostname | **Optional.** The address or name of the SMTP server to check. Defaults to "$address$" if the host's `address` attribute is set, `address6` otherwise.
rbl_server | **Required** List of RBL servers as an array.
rbl_warning | **Optional** Number of blacklisting servers for a warning.
rbl_critical | **Optional** Number of blacklisting servers for a critical.
tbl_timeout | **Optional** Seconds before plugin times out (default: 15).
