diff --git a/debian/icinga2-common.icinga2.init b/debian/icinga2-common.icinga2.init
index e3be727ac..bd5561c0c 100644
--- a/debian/icinga2-common.icinga2.init
+++ b/debian/icinga2-common.icinga2.init
@@ -40,18 +40,18 @@ SCRIPTNAME=/etc/init.d/$NAME
 
 # check run directory
 check_run () {
-    test -d '/var/run/icinga2' || mkdir /var/run/icinga2
-    test -d '/var/run/icinga2/cmd' || mkdir /var/run/icinga2/cmd
+  test -d '/var/run/icinga2' || mkdir /var/run/icinga2
+  test -d '/var/run/icinga2/cmd' || mkdir /var/run/icinga2/cmd
 
-    chown nagios:nagios /var/run/icinga2
-    chmod 0755 /var/run/icinga2
+  chown nagios:nagios /var/run/icinga2
+  chmod 0755 /var/run/icinga2
 
-    chown nagios:www-data /var/run/icinga2/cmd
-    chmod 2710 /var/run/icinga2/cmd
+  chown nagios:www-data /var/run/icinga2/cmd
+  chmod 2710 /var/run/icinga2/cmd
 }
 
 check_config () {
-    $DAEMON --validate -u "$DAEMON_USER" -g "$DAEMON_GROUP" -c "$DAEMON_CONFIG"
+  $DAEMON --validate -u "$DAEMON_USER" -g "$DAEMON_GROUP" -c "$DAEMON_CONFIG"
 }
 
 #
@@ -59,18 +59,18 @@ check_config () {
 #
 do_start()
 {
-	# Return
-	#   0 if daemon has been started
-	#   1 if daemon was already running
-	#   2 if daemon could not be started
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
-		|| return 1
-	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
-		-c "$DAEMON_CONFIG" -u "$DAEMON_USER" -g "$DAEMON_GROUP" -d $DAEMON_ARGS \
-		|| return 2
-	# Add code here, if necessary, that waits for the process to be ready
-	# to handle requests from services started subsequently which depend
-	# on this one.  As a last resort, sleep for some time.
+  # Return
+  #   0 if daemon has been started
+  #   1 if daemon was already running
+  #   2 if daemon could not be started
+  start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
+    || return 1
+  start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
+    -c "$DAEMON_CONFIG" -u "$DAEMON_USER" -g "$DAEMON_GROUP" -d $DAEMON_ARGS \
+    || return 2
+  # Add code here, if necessary, that waits for the process to be ready
+  # to handle requests from services started subsequently which depend
+  # on this one.  As a last resort, sleep for some time.
 }
 
 #
@@ -78,52 +78,52 @@ do_start()
 #
 do_stop()
 {
-	# Return
-	#   0 if daemon has been stopped
-	#   1 if daemon was already stopped
-	#   2 if daemon could not be stopped
-	#   other if a failure occurred
-	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
-	RETVAL="$?"
-	[ "$RETVAL" = 2 ] && return 2
-	# Wait for children to finish too if this is a daemon that forks
-	# and if the daemon is only ever run from this initscript.
-	# If the above conditions are not satisfied then add some other code
-	# that waits for the process to drop all resources that could be
-	# needed by services started subsequently.  A last resort is to
-	# sleep for some time.
-	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
-	[ "$?" = 2 ] && return 2
-	# Many daemons don't delete their pidfiles when they exit.
-	rm -f $PIDFILE
-	return "$RETVAL"
+  # Return
+  #   0 if daemon has been stopped
+  #   1 if daemon was already stopped
+  #   2 if daemon could not be stopped
+  #   other if a failure occurred
+  start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
+  RETVAL="$?"
+  [ "$RETVAL" = 2 ] && return 2
+  # Wait for children to finish too if this is a daemon that forks
+  # and if the daemon is only ever run from this initscript.
+  # If the above conditions are not satisfied then add some other code
+  # that waits for the process to drop all resources that could be
+  # needed by services started subsequently.  A last resort is to
+  # sleep for some time.
+  start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+  [ "$?" = 2 ] && return 2
+  # Many daemons don't delete their pidfiles when they exit.
+  rm -f $PIDFILE
+  return "$RETVAL"
 }
 
 #
 # Function that sends a SIGHUP to the daemon/service
 #
 do_reload() {
-	#
-	# If the daemon can reload its configuration without
-	# restarting (for example, when it is sent a SIGHUP),
-	# then implement that here.
-	#
-	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
-	return 0
+  #
+  # If the daemon can reload its configuration without
+  # restarting (for example, when it is sent a SIGHUP),
+  # then implement that here.
+  #
+  start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
+  return 0
 }
 
 do_check_config () {
-    DOEXITONOK="$1"
-    log_begin_msg "checking Icinga2 configuration"
-    if ! check_config >/dev/null 2>&1; then
-        echo
-        check_config
-        log_failure_msg "checking Icinga2 configuration"
-        exit 1
-    else
-        log_end_msg 0
-        [ -n "$DOEXITONOK" ] && exit 0
-    fi
+  DOEXITONOK="$1"
+  log_begin_msg "checking Icinga2 configuration"
+  if ! check_config >/dev/null 2>&1; then
+    echo
+    check_config
+    log_failure_msg "checking Icinga2 configuration"
+    exit 1
+  else
+    log_end_msg 0
+    [ -n "$DOEXITONOK" ] && exit 0
+  fi
 }
 
 check_run
@@ -131,56 +131,57 @@ check_run
 case "$1" in
   start)
     do_check_config
-	log_daemon_msg "Starting $DESC" "$NAME"
-	do_start
-	case "$?" in
-		0|1) log_end_msg 0 ;;
-		2) log_end_msg 1 ;;
-	esac
-	;;
+    log_daemon_msg "Starting $DESC" "$NAME"
+    do_start
+    case "$?" in
+      0|1) log_end_msg 0 ;;
+      2) log_end_msg 1 ;;
+    esac
+    ;;
   stop)
-	log_daemon_msg "Stopping $DESC" "$NAME"
-	do_stop
-	case "$?" in
-		0|1) log_end_msg 0 ;;
-		2) log_end_msg 1 ;;
-	esac
-	;;
+    log_daemon_msg "Stopping $DESC" "$NAME"
+    do_stop
+    case "$?" in
+      0|1) log_end_msg 0 ;;
+      2) log_end_msg 1 ;;
+    esac
+    ;;
   status)
-	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
-	;;
+    status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+    ;;
   reload|force-reload)
     do_check_config
-	log_daemon_msg "Reloading $DESC" "$NAME"
-	do_reload
-	log_end_msg $?
-	;;
+    log_daemon_msg "Reloading $DESC" "$NAME"
+    do_reload
+    log_end_msg $?
+    ;;
   restart)
     do_check_config
-	log_daemon_msg "Restarting $DESC" "$NAME"
-	do_stop
-	case "$?" in
-	  0|1)
-		do_start
-		case "$?" in
-			0) log_end_msg 0 ;;
-			1) log_end_msg 1 ;; # Old process is still running
-			*) log_end_msg 1 ;; # Failed to start
-		esac
-		;;
-	  *)
-		# Failed to stop
-		log_end_msg 1
-		;;
-	esac
-	;;
+    log_daemon_msg "Restarting $DESC" "$NAME"
+    do_stop
+    case "$?" in
+      0|1)
+        do_start
+        case "$?" in
+          0) log_end_msg 0 ;;
+          1) log_end_msg 1 ;; # Old process is still running
+          *) log_end_msg 1 ;; # Failed to start
+        esac
+        ;;
+      *)
+        # Failed to stop
+        log_end_msg 1
+        ;;
+    esac
+  ;;
   checkconfig)
     do_check_config 1
     ;;
   *)
-	echo "Usage: $SCRIPTNAME {start|stop|status|reload|force-reload|restart|checkconfig}" >&2
-	exit 3
-	;;
+    echo "Usage: $SCRIPTNAME {start|stop|status|reload|force-reload|restart|checkconfig}" >&2
+    exit 3
+    ;;
 esac
 
+# vi: ts=2 sw=2 expandtab :
 :