# Migration from Icinga 1.x ## Configuration Migration The Icinga 2 configuration format introduces plenty of behavioural changes. ### Configuration Migration Script In order to migrate existing configuration in Icinga 1.x format the Icinga CLI as part of the Icinga Web 2 project will provide a configuration migration module. Details can be found in [https://dev.icinga.org/issues/5929]. ### Manual Config Migration For a long-term migration of your configuration you should consider re-creating your configuration based on the Icinga 2 proposed way of doing configuration right. Please read the [next chapter](#differences-1x-2) to get an idea about the differences between 1.x and 2. ## Differences between Icinga 1.x and 2 ### Configuration Format Icinga 1.x supports two configuration formats: key-value-based settings in the `icinga.cfg` configuration file and object-based in included files (`cfg_dir`, `cfg_file`). The path to the `icinga.cfg` configuration file must be passed to the Icinga daemon at startup. enable_notifications=1 define service { notifications_enabled 0 } Icinga 2 supports objects and (global) variables, but does not make a difference if it's the main configuration file, or any included file. const EnableNotifications = true object Service "test" { enable_notifications = 0 } #### Sample Configuration and ITL While Icinga 1.x ships sample configuration and templates spread in various object files Icinga 2 moves all templates into the Icinga Template Library (ITL) and includes that in the sample configuration. Additional plugin check commands are shipped with Icinga 2 as well. The ITL will be updated on every release and should not be edited by the user. There are still generic templates available for your convenience which may or may not be re-used in your configuration. For instance, `generic-service` includes all required attributes except `check_command` for an inline service. Sample configuration files are located in the `conf.d/` directory which is included in `icinga2.conf` by default. ### Main Config File In Icinga 1.x there are many global configuration settings available in `icinga.cfg`. Icinga 2 only uses a small set of [global constants](#global-constants) allowing you to specify certain different setting such as the `NodeName` in a cluster scenario. Aside from that, the [icinga2.conf](#icinga2-conf) should take care of including global constants, enabled [features](#features) and the object configuration. ### Include Files and Directories In Icinga 1.x the `icinga.cfg` file contains `cfg_file` and `cfg_dir` directives. The `cfg_dir` directive recursively includes all files with a `.cfg` suffix in the given directory. Only absolute paths may be used. The `cfg_file` and `cfg_dir` directives can include the same file twice which leads to configuration errors in Icinga 1.x. cfg_file=/etc/icinga/objects/commands.cfg cfg_dir=/etc/icinga/objects Icinga 2 supports wildcard includes and relative paths, e.g. for including `conf.d/*.conf` in the same directory. include "conf.d/*.conf" If you want to include files and directories recursively, you need to define a separate option and add the directory and an optional pattern. include_recursive "conf.d" A global search path for includes is available for advanced features like the Icinga Template Library (ITL) or additional monitoring plugins check command configuration. include include By convention the `.conf` suffix is used for Icinga 2 configuration files. ### Resource File and Global Macros Global macros such as for the plugin directory, usernames and passwords can be set in the `resource.cfg` configuration file in Icinga 1.x. By convention the `USER1` macro is used to define the directory for the plugins. Icinga 2 uses global constants instead. In the default config these are set in the `constants.conf` configuration file: /** * This file defines global constants which can be used in * the other configuration files. At a minimum the * PluginDir constant should be defined. */ const PluginDir = "/usr/lib/nagios/plugins" [Global macros](#global-constants) can only be defined once. Trying to modify a global constant will result in an error. ### Configuration Comments In Icinga 1.x comments are made using a leading hash (`#`) or a semi-colon (`;`) for inline comments. In Icinga 2 comments can either be encapsulated by `/*` and `*/` (allowing for multi-line comments) or starting with two slashes (`//`). A leading hash (`#`) could also be used. ### Object names Object names must not contain a colon (`!`). Use the `display_name` attribute to specify user-friendly names which should be shown in UIs (supported by Icinga 1.x Classic UI and Web). Object names are not specified using attributes (e.g. `service_description` for services) like in Icinga 1.x but directly after their type definition. define service { host_name localhost service_description ping4 } object Service "ping4" { host_name = "localhost" } ### Templates In Icinga 1.x templates are identified using the `register 0` setting. Icinga 2 uses the `template` identifier: template Service "ping4-template" { } Icinga 1.x objects inherit from templates using the `use` attribute. Icinga 2 uses the keyword `import` with template names in double quotes. define service { service_description testservice use tmpl1,tmpl2,tmpl3 } object Service "testservice" { import "tmpl1" import "tmpl2" import "tmpl3" } The last template overrides previously set values. ### Object attributes Icinga 1.x separates attribute and value pairs with whitespaces/tabs. Icinga 2 requires an equal sign (=) between them. define service { check_interval 5 } object Service "test" { check_interval = 5m } Please note that the default time value is seconds, if no duration literal is given. `check_interval = 5` behaves the same as `check_interval = 5s`. All strings require double quotes in Icinga 2. Therefore a double-quote must be escaped with a backslash (e.g. in command line). If an attribute identifier starts with a number, it must be encapsulated with double quotes as well. #### Alias vs. Display Name In Icinga 1.x a host can have an `alias` and a `display_name` attribute used for a more descriptive name. A service only can have a `display_name` attribute. The `alias` is used for group, timeperiod, etc. objects too. Icinga 2 only supports the `display_name` attribute which is also taken into account by Icinga web interfaces. ### Custom Attributes Icinga 2 allows you to define custom attributes in the `vars` dictionary. The `notes`, `notes_url`, `action_url`, `icon_image`, `icon_image_alt` attributes for host and service objects are still available in Icinga 2. `2d_coords` and `statusmap_image` are not supported in Icinga 2. #### Custom Variables Icinga 1.x custom variable attributes must be prefixed using an underscore (`_`). In Icinga 2 these attributes must be added to the `vars` dictionary as custom attributes. vars.dn = "cn=icinga2-dev-host,ou=icinga,ou=main,ou=IcingaConfig,ou=LConf,dc=icinga,dc=org" vars.cv = "my custom cmdb description" These custom attributes are also used as [command parameters](#command-passing-parameters). ### Host Service Relation In Icinga 1.x a service object is associated with a host by defining the `host_name` attribute in the service definition. Alternate methods refer to `hostgroup_name` or behavior changing regular expression. The preferred way of associating hosts with services in Icinga 2 is by using the [apply](#using-apply) keyword. ### Users Contacts have been renamed to Users (same for groups). A user does not only provide attributes and custom attributes used for notifications, but is also used for authorization checks. In Icinga 2 notification commands are not directly associated with users. Instead the notification command is specified using `Notification` objects. The `StatusDataWriter`, `IdoMySqlConnection` and `LivestatusListener` types will provide the contact and contactgroups attributes for services for compatibility reasons. These values are calculated from all services, their notifications, and their users. ### Macros Various object attributes and runtime variables can be accessed as macros in commands in Icinga 1.x - Icinga 2 supports all required [custom attributes](#custom-attributes). #### Command Arguments If you have previously used Icinga 1.x you may already be familiar with user and argument definitions (e.g., `USER1` or `ARG1`). Unlike in Icinga 1.x the Icinga 2 custom attributes may have arbitrary names and arguments are no longer specified in the `check_command` setting. In Icinga 1.x arguments are specified in the `check_command` attribute and are separated from the command name using an exclamation mark (`!`). define command { command_name ping4 command_line $USER1$/check_ping -H $address$ -w $ARG1$ -c $ARG2$ -p 5 } define service { use local-service host_name localhost service_description PING check_command ping4!100.0,20%!500.0,60% } With the freely definable custom attributes in Icinga 2 it looks like this: object CheckCommand "ping4" { command = PluginDir + "/check_ping -H $address$ -w $wrta$,$wpl%$ -c $crta$,$cpl%$" } object Service "PING" { check_command = "ping4" vars.wrta = 100 vars.wpl = 20 vars.crta = 500 vars.cpl = 60 } The Classic UI feature named `Command Expander` does not work with Icinga 2. #### Environment Macros The global configuration setting `enable_environment_macros` does not exist in Icinga 2. Macros exported into the [environment](#runtime-custom-attribute-env-vars) must be set using the `env` attribute in command objects. #### Runtime Macros Icinga 2 requires an object specific namespace when accessing configuration and stateful runtime macros. Custom attributes can be access directly. Changes to user (contact) runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- USERNAME | user.name USERDISPLAYNAME | user.display_name USEREMAIL | email if set as `email` custom attribute. USERPAGER | pager if set as `pager` custom attribute. Changes to service runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- SERVICEDESC | service.description SERVICEDISPLAYNAME | service.display_name SERVICECHECKCOMMAND | service.check_command SERVICESTATE | service.state SERVICESTATEID | service.state_id SERVICESTATETYPE | service.state_type SERVICEATTEMPT | service.check_attempt MAXSERVICEATTEMPT | service.max_check_attempts LASTSERVICESTATE | service.last_state LASTSERVICESTATEID | service.last_state_id LASTSERVICESTATETYPE | service.last_state_type LASTSERVICESTATECHANGE | service.last_state_change SERVICEDURATIONSEC | service.durations_ec SERVICELATENCY | service.latency SERVICEEXECUTIONTIME | service.execution_time SERVICEOUTPUT | service.output SERVICEPERFDATA | service.perfdata LASTSERVICECHECK | service.last_check SERVICENOTES | service.notes SERVICENOTESURL | service.notes_url SERVICEACTIONURL | service.action_url Changes to host runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- HOSTNAME | host.name HOSTDISPLAYNAME | host.display_name HOSTCHECKCOMMAND | host.check_command HOSTALIAS | (use `host.display_name` instead) HOSTSTATE | host.state HOSTSTATEID | host.state_id HOSTSTATETYPE | host.state_type HOSTATTEMPT | host.check_attempt MAXHOSTATTEMPT | host.max_check_attempts LASTHOSTSTATE | host.last_state LASTHOSTSTATEID | host.last_state_id LASTHOSTSTATETYPE | host.last_state_type LASTHOSTSTATECHANGE | host.last_state_change HOSTDURATIONSEC | host.duration_sec HOSTLATENCY | host.latency HOSTEXECUTIONTIME | host.execution_time HOSTOUTPUT | host.output HOSTPERFDATA | host.perfdata LASTHOSTCHECK | host.last_check HOSTNOTES | host.notes HOSTNOTESURL | host.notes_url HOSTACTIONURL | host.action_url HOSTADDRESS | host.address HOSTADDRESS6 | host.address6 TOTALSERVICES | host.num_services TOTALSERVICESOK | host.num_services_ok TOTALSERVICESWARNING | host.num_services_warning TOTALSERVICESUNKNOWN | host.num_services_unknown TOTALSERVICESCRITICAL | host.num_services_critical Changes to command runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- COMMANDNAME | command.name Changes to notification runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- NOTIFICATIONTYPE | notification.type NOTIFICATIONAUTHOR | notification.author NOTIFICATIONCOMMENT | notification.comment NOTIFICATIONAUTHORNAME | (use `notification.author`) NOTIFICATIONAUTHORALIAS | (use `notification.author`) Changes to global runtime macros: Icinga 1.x | Icinga 2 -----------------------|---------------------- TIMET | icinga.timet LONGDATETIME | icinga.long_date_time SHORTDATETIME | icinga.short_date_time DATE | icinga.date TIME | icinga.time PROCESSSTARTTIME | icinga.uptime Changes to global statistic macros: Icinga 1.x | Icinga 2 ----------------------------------|---------------------- TOTALHOSTSUP | icinga.num_hosts_up TOTALHOSTSDOWN | icinga.num_hosts_down TOTALHOSTSUNREACHABLE | icinga.num_hosts_unreachable TOTALHOSTSDOWNUNHANDLED | -- TOTALHOSTSUNREACHABLEUNHANDLED | -- TOTALHOSTPROBLEMS | down TOTALHOSTPROBLEMSUNHANDLED | down-(downtime+acknowledged) TOTALSERVICESOK | icinga.num_services_ok TOTALSERVICESWARNING | icinga.num_services_warning TOTALSERVICESCRITICAL | icinga.num_services_critical TOTALSERVICESUNKNOWN | icinga.num_services_unknown TOTALSERVICESWARNINGUNHANDLED | -- TOTALSERVICESCRITICALUNHANDLED | -- TOTALSERVICESUNKNOWNUNHANDLED | -- TOTALSERVICEPROBLEMS | ok+warning+critical+unknown TOTALSERVICEPROBLEMSUNHANDLED | warning+critical+unknown-(downtime+acknowledged) ### External Commands `CHANGE_CUSTOM_CONTACT_VAR` was renamed to `CHANGE_CUSTOM_USER_VAR`. `CHANGE_CONTACT_MODATTR` was renamed to `CHANGE_USER_MODATTR`. The following external commands are not supported: CHANGE_CONTACT_HOST_NOTIFICATION_TIMEPERIOD CHANGE_HOST_NOTIFICATION_TIMEPERIOD CHANGE_SVC_NOTIFICATION_TIMEPERIOD DEL_DOWNTIME_BY_HOSTGROUP_NAME DEL_DOWNTIME_BY_START_TIME_COMMENT DISABLE_ALL_NOTIFICATIONS_BEYOND_HOST DISABLE_CONTACT_HOST_NOTIFICATIONS DISABLE_CONTACT_SVC_NOTIFICATIONS DISABLE_CONTACTGROUP_HOST_NOTIFICATIONS DISABLE_CONTACTGROUP_SVC_NOTIFICATIONS DISABLE_FAILURE_PREDICTION DISABLE_HOST_AND_CHILD_NOTIFICATIONS DISABLE_HOST_FRESHNESS_CHECKS DISABLE_HOST_SVC_NOTIFICATIONS DISABLE_NOTIFICATIONS_EXPIRE_TIME DISABLE_SERVICE_FRESHNESS_CHECKS ENABLE_ALL_NOTIFICATIONS_BEYOND_HOST ENABLE_CONTACT_HOST_NOTIFICATIONS ENABLE_CONTACT_SVC_NOTIFICATIONS ENABLE_CONTACTGROUP_HOST_NOTIFICATIONS ENABLE_CONTACTGROUP_SVC_NOTIFICATIONS ENABLE_FAILURE_PREDICTION ENABLE_HOST_AND_CHILD_NOTIFICATIONS ENABLE_HOST_FRESHNESS_CHECKS ENABLE_HOST_SVC_NOTIFICATIONS ENABLE_SERVICE_FRESHNESS_CHECKS READ_STATE_INFORMATION SAVE_STATE_INFORMATION SCHEDULE_AND_PROPAGATE_HOST_DOWNTIME SCHEDULE_AND_PROPAGATE_TRIGGERED_HOST_DOWNTIME SET_HOST_NOTIFICATION_NUMBER SET_SVC_NOTIFICATION_NUMBER START_ACCEPTING_PASSIVE_HOST_CHECKS START_ACCEPTING_PASSIVE_SVC_CHECKS START_OBSESSING_OVER_HOST START_OBSESSING_OVER_HOST_CHECKS START_OBSESSING_OVER_SVC START_OBSESSING_OVER_SVC_CHECKS STOP_ACCEPTING_PASSIVE_HOST_CHECKS STOP_ACCEPTING_PASSIVE_SVC_CHECKS STOP_OBSESSING_OVER_HOST STOP_OBSESSING_OVER_HOST_CHECKS STOP_OBSESSING_OVER_SVC STOP_OBSESSING_OVER_SVC_CHECKS ### Checks #### Check Output Icinga 2 does not make a difference between `output` (first line) and `long_output` (remaining lines) like in Icinga 1.x. Performance Data is provided separately. The `StatusDataWriter`, `IdoMysqlConnection` and `LivestatusListener` types split the raw output into `output` (first line) and `long_output` (remaining lines) for compatibility reasons. #### Initial State Icinga 1.x uses the `max_service_check_spread` setting to specify a timerange where the initial state checks must have happened. Icinga 2 will use the `retry_interval` setting instead and `check_interval` divided by 5 if `retry_interval` is not defined. ### Comments Icinga 2 doesn't support non-persistent comments. ### Commands Unlike in Icinga 1.x there are 3 different command types in Icinga 2: `CheckCommand`, `NotificationCommand` and `EventCommand`. For example in Icinga 1.x it is possible to accidently use a notification command as an event handler which might cause problems depending on which runtime macros are used in the notification command. In Icinga 2 these command types are separated and will generate an error on configuration validation if used in the wrong context. While Icinga 2 still supports the complete command line in command objects, it's also possible to encapsulate all arguments into double quotes and passing them as array to the `command_line` attribute i.e. for better readability. It's also possible to define default custom attributes for the command itself which can be overridden by a service macro. ### Groups In Icinga 2 hosts, services and users are added to groups using the `groups` attribute in the object. The old way of listing all group members in the group's `members` attribute is available through `assign where` and `ignore where` conditions. object Host "web-dev" { import "generic-host" } object HostGroup "dev-hosts" { display_name = "Dev Hosts" assign where match("*-dev", host.name) } #### Add Service to Hostgroup where Host is Member In order to associate a service with all hosts in a host group the `apply` keyword can be used: apply Service "ping4" { import "generic-service" check_command = "ping4" assign where "dev-hosts" in host.groups } ### Notifications Notifications are a new object type in Icinga 2. Imagine the following notification configuration problem in Icinga 1.x: * Service A should notify contact X via SMS * Service B should notify contact X via Mail * Service C should notify contact Y via Mail and SMS * Contact X and Y should also be used for authorization (e.g. in Classic UI) The only way achieving a semi-clean solution is to * Create contact X-sms, set service_notification_command for sms, assign contact to service A * Create contact X-mail, set service_notification_command for mail, assign contact to service B * Create contact Y, set service_notification_command for sms and mail, assign contact to service C * Create contact X without notification commands, assign to service A and B Basically you are required to create duplicated contacts for either each notification method or used for authorization only. Icinga 2 attempts to solve that problem in this way * Create user X, set SMS and Mail attributes, used for authorization * Create user Y, set SMS and Mail attributes, used for authorization * Create notification A-SMS, set command for sms, add user X, assign notification A-SMS to service A * Create notification B-Mail, set command for mail, add user X, assign notification Mail to service B * Create notification C-SMS, set command for sms, add user Y, assign notification C-SMS to service C * Create notification C-Mail, set command for mail, add user Y, assign notification C-Mail to service C Previously in Icinga 1.x it looked like this: service -> (contact, contactgroup) -> notification command In Icinga 2 it will look like this: Service -> Notification -> NotificationCommand -> User, UserGroup #### Escalations Escalations in Icinga 1.x require a separated object matching on existing objects. Escalations happen between a defined start and end time which is calculated from the notification_interval: start = notification start + (notification_interval * first_notification) end = notification start + (notification_interval * last_notification) In theory first_notification and last_notification can be set to readable numbers. In practice users are manipulating those attributes in combination with notification_interval in order to get a start and end time. In Icinga 2 the notification object can be used as notification escalation if the start and end times are defined within the 'times' attribute using duration literals (e.g. 30m). The Icinga 2 escalation does not replace the current running notification. In Icinga 1.x it's required to copy the contacts from the service notification to the escalation to garantuee the normal notifications once an escalation happens. That's not necessary with Icinga 2 only requiring an additional notification object for the escalation itself. #### Notification Options Unlike Icinga 1.x with the 'notification_options' attribute with comma-separated state and type filters, Icinga 2 uses two configuration attributes for that. All state and type filter use long names or'd with a pipe together notification_options w,u,c,r,f,s states = [ Warning, Unknown, Critical ] filters = [ Problem, Recovery, FlappingStart, FlappingEnd, DowntimeStart, DowntimeEnd, DowntimeRemoved ] Icinga 2 adds more fine-grained type filters for acknowledgements, downtime and flapping type (start, end, ...). ### Dependencies and Parents In Icinga 1.x it's possible to define host parents to determine network reachability and keep a host's state unreachable rather than down. Furthermore there are host and service dependencies preventing unnecessary checks and notifications. A host must not depend on a service, and vice versa. All dependencies are configured as separate objects and cannot be set directly on the host or service object. A service can now depend on a host, and vice versa. A service has an implicit dependeny (parent) to its host. A host to host dependency acts implicit as host parent relation. The former `host_name` and `dependent_host_name` have been renamed to `parent_host_name` and `child_host_name` (same for the service attribute). When using apply rules the child attributes may be omitted. For detailed examples on how to use the dependencies please check the [dependencies](#dependencies) chapter. Dependencies can be applied to hosts or services using the [apply rules](#apply). The `StatusDataWriter`, `IdoMysqlConnection` and `LivestatusListener` types support the Icinga 1.x schema with dependencies and parent attributes for compatibility reasons. ### Flapping The Icinga 1.x flapping detection uses the last 21 states of a service. This value is hardcoded and cannot be changed. The algorithm on determining a flapping state is as follows: flapping value = (number of actual state changes / number of possible state changes) The flapping value is then compared to the low and high flapping thresholds. The algorithm used in Icinga 2 does not store the past states but calculcates the flapping threshold from a single value based on counters and half-life values. Icinga 2 compares the value with a single flapping threshold configuration attribute. ### Check Result Freshness Freshness of check results must be explicitely enabled in Icinga 1.x. The attribute `freshness_treshold` defines the threshold in seconds. Once the threshold is triggered, an active freshness check is executed defined by the `check_command` attribute. Both check methods (active and passive) use the same freshness check method. In Icinga 2 active check freshness is determined by the `check_interval` attribute and no incoming check results in that period of time (last check + check interval). Passive check freshness is calculated from the `check_interval` attribute if set. There is no extra `freshness_threshold` attribute in Icinga 2. If the freshness checks are invalid, a new service check is forced. ### State Retention Icinga 1.x uses the `retention.dat` file to save its state in order to be able to reload it after a restart. In Icinga 2 this file is called `icinga2.state`. The format objects are stored in is not compatible with Icinga 1.x. ### Logging Icinga 1.x supports syslog facilities and writes its own `icinga.log` log file and archives. These logs are used in Icinga 1.x Classic UI to generate historical reports. Icinga 2 compat library provides the CompatLogger object which writes the icinga.log and archive in Icinga 1.x format in order to stay compatible with Classic UI and other addons. The native Icinga 2 logging facilities are split into three configuration objects: SyslogLogger, FileLogger, StreamLogger. Each of them got their own severity and target configuration. The Icinga 2 daemon log does not log any alerts but is considered an application log only. ### Broker Modules and Features Icinga 1.x broker modules are incompatible with Icinga 2. In order to provide compatibility with Icinga 1.x the functionality of several popular broker modules was implemented for Icinga 2: * IDOUtils * Livestatus * Cluster (allows for high availability and load balancing) ### Distributed Monitoring Icinga 1.x uses the native "obsess over host/service" method which requires the NSCA addon passing the slave's checkresults passively onto the master's external command pipe. While this method may be used for check load distribution, it does not provide any configuration distribution out-of-the-box. Furthermore comments, downtimes and other stateful runtime data is not synced between the master and slave nodes. There are addons available solving the check and configuration distribution problems Icinga 1.x distributed monitoring currently suffers from. Icinga 2 implements a new built-in [distributed monitoring architecture](#distributed-monitoring-high-availability), including config and check distribution, IPv4/IPv6 support, SSL certificates and zone support for DMZ. High Availability and load balancing are also part of the Icinga 2 Cluster setup.