/******************************************************************************
 * Icinga 2                                                                   *
 * Copyright (C) 2012-2015 Icinga Development Team (http://www.icinga.org)    *
 *                                                                            *
 * This program is free software; you can redistribute it and/or              *
 * modify it under the terms of the GNU General Public License                *
 * as published by the Free Software Foundation; either version 2             *
 * of the License, or (at your option) any later version.                     *
 *                                                                            *
 * This program is distributed in the hope that it will be useful,            *
 * but WITHOUT ANY WARRANTY; without even the implied warranty of             *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the              *
 * GNU General Public License for more details.                               *
 *                                                                            *
 * You should have received a copy of the GNU General Public License          *
 * along with this program; if not, write to the Free Software Foundation     *
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.             *
 ******************************************************************************/

template CheckCommand "ping-common" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_ping" ]

	arguments = {
		"-H" = "$ping_address$"
		"-w" = "$ping_wrta$,$ping_wpl$%"
		"-c" = "$ping_crta$,$ping_cpl$%"
		"-p" = "$ping_packets$"
		"-t" = "$ping_timeout$"
	}

	vars.ping_wrta = 100
	vars.ping_wpl = 5
	vars.ping_crta = 200
	vars.ping_cpl = 15
}

object CheckCommand "ping4" {
	import "ping-common"

	command += [ "-4" ]

	vars.ping_address = "$address$"
}

object CheckCommand "ping6" {
	import "ping-common"

	command += [ "-6" ]

	vars.ping_address = "$address6$"
}

object CheckCommand "hostalive" {
	import "ping4"

	vars.ping_wrta = 3000.0
	vars.ping_wpl = 80

	vars.ping_crta = 5000.0
	vars.ping_cpl = 100
}

template CheckCommand "fping-common" {
	import "plugin-check-command"

	command = [
		PluginDir + "/check_fping",
		"$fping_address$"
	]

	arguments = {
		"-w" = "$fping_wrta$,$fping_wpl$%"
		"-c" = "$fping_crta$,$fping_cpl$%"
		"-n" = "$fping_number$"
		"-i" = "$fping_interval$"
		"-b" = "$fping_bytes$"
		"-T" = "$fping_target_timeout$"
		"-S" = "$fping_source_ip$"
		"-I" = "$fping_source_interface$"
	}

	vars.fping_wrta = 100
	vars.fping_wpl = 5
	vars.fping_crta = 200
	vars.fping_cpl = 15
	vars.fping_number = 5
	vars.fping_interval = 500
}

object CheckCommand "fping4" {
        import "fping-common"

        command += [ "-4" ]

        vars.fping_address = "$address$"
}

object CheckCommand "fping6" {
        import "fping-common"

        command += [ "-6" ]

        vars.fping_address = "$address6$"
}

object CheckCommand "dummy" {
	import "plugin-check-command"

	command = [
		PluginDir + "/check_dummy",
		"$dummy_state$",
		"$dummy_text$"
	]

	vars.dummy_state = 0
	vars.dummy_text = "Check was successful."
}

object CheckCommand "passive" {
	import "dummy"

	vars.dummy_state = 3
	vars.dummy_text = "No Passive Check Result Received."
}

object CheckCommand "tcp" {
	import "plugin-check-command"

	command = [
		PluginDir + "/check_tcp",
		"-H", "$tcp_address$",
		"-p", "$tcp_port$"
	]

	vars.tcp_address = "$address$"
}

object CheckCommand "ssl" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_tcp" ]

	arguments = {
		"-H" = "$ssl_address$"
		"-p" = "$ssl_port$"
		"--ssl" = { }
		"--timeout" = "$ssl_timeout$"
		"-D" = "$ssl_cert_valid_days_warn$,$ssl_cert_valid_days_critical$"
	}

	vars.ssl_address = "$address$"
}

object CheckCommand "udp" {
	import "plugin-check-command"

	command = [
		PluginDir + "/check_udp",
		"-H", "$udp_address$",
		"-p", "$udp_port$"
	]

	vars.udp_address = "$address$"
}

object CheckCommand "http" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_http" ]

	arguments = {
		"-H" = "$http_vhost$"
		"-I" = "$http_address$"
		"-u" = "$http_uri$"
		"-p" = "$http_port$"
		"-S" = {
			set_if = "$http_ssl$"
		}
		"--sni" = {
			set_if = "$http_sni$"
		}
		"-C" = {
			value = "$http_certificate$"
			description = "Minimum number of days a certificate has to be valid. Port defaults to 443."
		}
		"-J" = {
			value = "$http_clientcert$"
			description = "Name of file contains the client certificate (PEM format)"
		}
		"-K" = {
			value = "$http_privatekey$"
			description = "Name of file contains the private key (PEM format)"
		}
		"-a" = {
			value = "$http_auth_pair$"
			description = "Username:password on sites with basic authentication"
		}
		"--no-body" = {
			set_if = "$http_ignore_body$"
		}
		"-w" = "$http_warn_time$"
		"-c" = "$http_critical_time$"
		"-e" = "$http_expect$"
		"-d" = {
			value = "$http_headerstring$"
			description = "String to expect in the response headers"
		}
		"-s" = {
			value = "$http_string$"
			description = "String to expect in the content"
		}
		"-P" = {
			value = "$http_post$"
			description = "URL encoded http POST data"
		}
		"-j" = {
			value = "$http_method$"
			description = "Set http method (for example: HEAD, OPTIONS, TRACE, PUT, DELETE)"
		}
		"-M" = {
			value = "$http_maxage$"
			description = "Warn if document is more than seconds old"
		}
		"-T" = {
			value = "$http_contenttype$"
			description = "Specify Content-Type header when POSTing"
		}
		"-l" = {
			set_if = "$http_linespan$"
			description = "Allow regex to span newline"
			order = 1
		}
		"-r" = {
			value = "$http_expect_body_regex$"
			description = "Search page for regex"
			order = 2
		}
		"-R" = {
			value = "$http_expect_body_eregi$"
			description = "Search page for case-insensitive regex"
			order = 2
		}
		"--invert-regex" = {
			set_if = "$http_invertregex$"
			description = "Return CRITICAL if found, OK if not"
		}
		"-b" = {
			value = "$http_proxy_auth_pair$"
			description = "Username:password on proxy-servers with basic authentication"
		}
		"-A" = {
			value = "$http_useragent$"
			description = "String to be sent in http header as User Agent"
		}
		"-k" = {
			value = "$http_header$"
			description = "Any other tags to be sent in http header"
		}
		"-E" = {
			set_if = "$http_extendedperfdata$"
			description = "Print additional perfdata"
		}
		"-f" = {
			value = "$http_onredirect$"
			description = "How to handle redirect pages"
		}
		"-m" = {
			value = "$http_pagesize$"
			description = "Minim page size required:Maximum page size required"
		}
		"-t" = {
			value = "$http_timeout$"
			description = "Seconds before connection times out"
		}
	}

	vars.http_address = "$address$"
	vars.http_ssl = false
	vars.http_sni = false
	vars.http_linespan = false
	vars.http_invertregex = false
}

object CheckCommand "ftp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_ftp" ]

	arguments = {
		"-H" = "$ftp_address$"
	}

	vars.ftp_address = "$address$"
}

object CheckCommand "smtp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_smtp" ]

	arguments = {
		"-H" = "$smtp_address$"
		"-p" = "$smtp_port$"
		"-f" = "$smtp_mail_from$"
	}

	vars.smtp_address = "$address$"
}

object CheckCommand "ssmtp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_ssmtp" ]
	arguments = {
		"-H" = "$ssmtp_address$"
		"-p" = "$ssmtp_port$"
	}

	vars.ssmtp_address = "$address$"
}

object CheckCommand "imap" {
  	import "plugin-check-command"

  	command = [ PluginDir + "/check_imap" ]

	arguments = {
		"-H" = "$imap_address$"
		"-p" = "$imap_port$"
	}

  	vars.imap_address = "$address$"
}

object CheckCommand "simap" {
  	import "plugin-check-command"

	  command = [ PluginDir + "/check_simap" ]

	arguments = {
		"-H" = "$simap_address$"
		"-p" = "$simap_port$"
	}

	vars.simap_address = "$address$"
}

object CheckCommand "pop" {
	import "plugin-check-command"

  	command = [ PluginDir + "/check_pop" ]

	arguments = {
		"-H" = "$pop_address$"
		"-p" = "$pop_port$"
	}

	vars.pop_address = "$address$"
}

object CheckCommand "spop" {
  	import "plugin-check-command"

	command = [ PluginDir + "/check_spop" ]

	arguments = {
		"-H" = "$spop_address$"
		"-p" = "$spop_port$"
	}

	vars.spop_address = "$address$"
}

object CheckCommand "ntp_time" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_ntp_time" ]

	arguments = {
		"-H" = "$ntp_address$"
	}

	vars.ntp_address = "$address$"
}

object CheckCommand "ssh" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_ssh" ]

	arguments = {
		"-p" = "$ssh_port$"
		"-t" = "$ssh_timeout$"
		"host" = {
			value = "$ssh_address$"
			skip_key = true
			order = 1
		}
	}

	vars.ssh_address = "$address$"
}

object CheckCommand "disk" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_disk" ]

	arguments = {
		"-w" = {
			value = "$disk_wfree$"
			description = "Exit with WARNING status if less than INTEGER units of disk are free or Exit with WARNING status if less than PERCENT of disk space is free"
			required = true
		}

		"-c" = {
			value = "$disk_cfree$"
			description = "Exit with CRITICAL status if less than INTEGER units of disk are free or Exit with CRITCAL status if less than PERCENT of disk space is free"
			required = true
		}

		"-W" = {
			value = "$disk_inode_wfree$"
			description = "Exit with WARNING status if less than PERCENT of inode space is free"
		}

		"-K" = {
			value = "$disk_inode_cfree$"
			description = "Exit with CRITICAL status if less than PERCENT of inode space is free"
		}

		"-p" = {
			value = "$disk_partition$"
			description = "Path or partition (may be repeated)"
			repeat_key = true
		}

		"-p_old" = {
			key = "-p"
			value = "$disk_partition$"
		}

		"-x" = {
			value = "$disk_partitions_excluded$"
			description = "Ignore device (only works if -p unspecified)"
		}

		"-x_old" = {
			key = "-x"
			value = "$disk_partition_excluded$"
		}

		"-C" = {
			set_if = "$disk_clear$"
			description = "Clear thresholds"
		}

		"-E" = {
			set_if = "$disk_exact_match$"
			description = "For paths or partitions specified with -p, only check for exact paths"
		}

		"-e" = {
			set_if = "$disk_errors_only$"
			description = "Display only devices/mountpoints with errors"
		}

		"-g" = {
			value = "$disk_group$"
			description = "Group paths. Thresholds apply to (free-)space of all partitions together"
		}

		"-k" = {
			set_if = "$disk_kilobytes$"
			description = "Same as --units kB"
		}

		"-l" = {
			set_if = "$disk_local$"
			description = " Only check local filesystems"
		}

		"-L" = {
			set_if = "$disk_stat_remote_fs$"
			description = "Only check local filesystems against thresholds. Yet call stat on remote filesystems to test if they are accessible (e.g. to detect Stale NFS Handles)"
		}

		"-M" = {
			set_if = "$disk_mountpoint$"
			description = "Display the mountpoint instead of the partition"
		}

		"-m" = {
			set_if = "$disk_megabytes$"
			description = "Same as --units MB"
		}

		"-A" = {
			set_if = "$disk_all$"
			description = "Explicitly select all paths. This is equivalent to -R .*"
		}

		"-R" = {
			value = "$disk_eregi_path$"
			description = "Case insensitive regular expression for path/partition (may be repeated)"
			repeat_key = true
		}

		"-r" = {
			value = "$disk_ereg_path$"
			description = "Regular expression for path or partition (may be repeated)"
			repeat_key = true
		}

		"-I" = {
			value = "$disk_ignore_eregi_path$"
			description = "Regular expression to ignore selected path/partition (case insensitive) (may be repeated)"
			repeat_key = true
		}

		"-i" = {
			value = "$disk_ignore_ereg_path$"
			description = "Regular expression to ignore selected path or partition (may be repeated)"
			repeat_key = true
		}

		"-t" = {
			value = "$disk_timeout$"
			description = "Seconds before connection times out (default: 10)"
		}

		"-u" = {
			value = "$disk_units$"
			description = "Choose bytes, kB, MB, GB, TB (default: MB)"
		}

		"-X" = {
			value = "$disk_exclude_type$"
			description = "Ignore all filesystems of indicated type (may be repeated)"
			repeat_key = true
		}
	}

	vars.disk_wfree = 20
	vars.disk_cfree = 10
	vars.disk_megabytes = true
	vars.disk_exclude_type = ["none", "tmpfs", "sysfs", "proc", "devtmpfs"]
}

object CheckCommand "users" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_users" ]

	arguments = {
		"-w" = "$users_wgreater$"
		"-c" = "$users_cgreater$"
	}

	vars.users_wgreater = 20
	vars.users_cgreater = 50
}

object CheckCommand "procs" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_procs" ]

    arguments = {
        "-w" = {
            value = "$procs_warning$"
            description = "Generate warning state if metric is outside this range" 
        }
        "-c" = {
            value = "$procs_critical$"
            description = "Generate critical state if metric is outside this range" 
        }
        "-m" = {
            value = "$procs_metric$"
            description = "Check thresholds against metric" 
        }
        "-t" = {
            value = "$procs_timeout$"
            description = "Seconds before plugin times out"
        }
        "-T" = {
            set_if = "$procs_traditional$"
            description = "Filter own process the traditional way by PID instead of /proc/pid/exe"
        }
        "-s" = {
            value = "$procs_state$"
            description = "Only scan for processes that have one or more of the status flags you specify"
        }
        "-p" = {
            value = "$procs_ppid$"
            description = "Only scan for children of the parent process ID indicated"
        }
        "-z" = {
            value = "$procs_vsz$"
            description = "Only scan for processes with VSZ higher than indicated"
        }
        "-r" = {
            value = "$procs_rss$"
            description = "Only scan for processes with RSS higher than indicated"
        }
        "-P" = {
            value = "$procs_pcpu$"
            description = "Only scan for processes with PCPU higher than indicated"
        }
        "-u" = {
            value = "$procs_user$"
            description = "Only scan for processes with user name or ID indicated"
        }
        "-a" = {
            value = "$procs_argument$"
            description = "Only scan for processes with args that contain STRING"
        }
        "--ereg-argument-array" = {
            value = "$procs_argument_regex$"
            description = "Only scan for processes with args that contain the regex STRING"
        }
        "-C" = {
            value = "$procs_command$"
            description = "Only scan for exact matches of COMMAND (without path)"
        }
        "-k" = {
            set_if = "$procs_nokthreads$"
            description = "Only scan for non kernel threads"
        }
    }

    vars.procs_traditional = false
    vars.procs_nokthreads = false
    vars.procs_warning = 250
    vars.procs_critical = 400
}

object CheckCommand "swap" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_swap" ]

	arguments = {
		"-w" = "$swap_wfree$%"
		"-c" = "$swap_cfree$%"
	}

	vars.swap_wfree = 50
	vars.swap_cfree = 25
}

object CheckCommand "load" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_load" ]

	arguments = {
		"-w" = "$load_wload1$,$load_wload5$,$load_wload15$"
		"-c" = "$load_cload1$,$load_cload5$,$load_cload15$"
	}

	vars.load_wload1 = 5.0
	vars.load_wload5 = 4.0
	vars.load_wload15 = 3.0

	vars.load_cload1 = 10.0
	vars.load_cload5 = 6.0
	vars.load_cload15 = 4.0
}

object CheckCommand "snmp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_snmp" ]

	arguments = {
		"-H" = "$snmp_address$"
		"-o" = "$snmp_oid$"
		"-C" = "$snmp_community$"
		"-c" = "$snmp_crit$"
		"-w" = "$snmp_warn$"
		"-s" = "$snmp_string$"
		"-r" = "$snmp_ereg$"
		"-R" = "$snmp_eregi$"
		"-l" = "$snmp_label$"
		"-u" = "$snmp_units$"
		"-t" = "$snmp_timeout$"
		"--invert-search" = {
			set_if = "$snmp_invert_search$"
			description = "Invert search result and return CRITICAL if found"
		}
	}

	vars.snmp_address = "$address$"
	vars.snmp_community = "public"
	vars.snmp_invert_search = false
	vars.snmp_timeout = "10"
}

object CheckCommand "snmpv3" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_snmp" ]

	arguments = {
		"-H" = "$snmpv3_address$"
		"-P" = 3
		"--seclevel" = "authPriv"
		"-U" = "$snmpv3_user$"
		"-a" = "$snmpv3_auth_alg$"
		"-A" = "$snmpv3_auth_key$"
		"-x" = "$snmpv3_priv_alg$"
		"-X" = "$snmpv3_priv_key$"
		"-o" = "$snmpv3_oid$"
		"-c" = "$snmpv3_crit$"
		"-w" = "$snmpv3_warn$"
		"-l" = "$snmpv3_label$"
	}

	vars.snmpv3_address = "$address$"
	vars.snmpv3_auth_alg = "SHA"
	vars.snmpv3_priv_alg = "AES"
}

object CheckCommand "snmp-uptime" {
	import "snmp"

	vars.snmp_oid = "1.3.6.1.2.1.1.3.0"
}

object CheckCommand "apt" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_apt" ]
}

object CheckCommand "dhcp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_dhcp" ]

	arguments = {
		"-s" = "$dhcp_serverip$"
		"-r" = "$dhcp_requestedip$"
		"-t" = "$dhcp_timeout$"
		"-i" = "$dhcp_interface$"
		"-m" = "$dhcp_mac$"
		"-u" = {
			set_if = "$dhcp_unicast$"
		}
	}

	vars.dhcp_unicast = false
}

object CheckCommand "dns" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_dns" ]

	arguments = {
		"-H" = "$dns_lookup$"
		"-s" = "$dns_server$"
		"-a" = "$dns_expected_answers$"
		"-a_old" = {
			key = "-a"
			value ="$dns_expected_answer$"
		}
		"-A" = {
			set_if = "$dns_authoritative$"
		}
	}

	vars.dns_lookup = "$host_name$"
	vars.dns_expected_answer = "$address$"
}

object CheckCommand "dig" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_dig" ]

	arguments = {
		"-H" = "$dig_server$"
		"-l" = "$dig_lookup$"
	}

	vars.dig_server = "$address$"
}

object CheckCommand "nscp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_nt" ]

	arguments = {
		"-H" = "$nscp_address$"
		"-p" = "$nscp_port$"
		"-s" = "$nscp_password$"
		"-v" = {
			value = "$nscp_variable$"
			required = true
		}
		"-l" = {
			value = "$nscp_params$"
			repeat_key = false
		}
		"-w" = "$nscp_warn$"
		"-c" = "$nscp_crit$"
		"-t" = "$nscp_timeout$"
	}

	vars.nscp_address = "$address$"
	vars.nscp_port = 12489
}

object CheckCommand "by_ssh" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_by_ssh" ]

	arguments = {
		"-H" = "$by_ssh_address$"
		"-p" = "$by_ssh_port$"
		"-C" = "$by_ssh_command$"
		"-l" = "$by_ssh_logname$"
		"-i" = "$by_ssh_identity$"
		"-q" = {
			set_if = "$by_ssh_quiet$"
		}
		"-w" = "$by_ssh_warn$"
		"-c" = "$by_ssh_crit$"
		"-t" = "$by_ssh_timeout$"
	}

	vars.by_ssh_address = "$address$"
	vars.by_ssh_quiet = false
}

object CheckCommand "ups" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_ups" ]

	arguments = {
		"-H" = "$ups_address$"
		"-u" = "$ups_name$"
	}

	vars.ups_address = "$address$"
	vars.ups_name = "ups"
}

object CheckCommand "nrpe" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_nrpe" ]

 	arguments = {
		"-H" = "$nrpe_address$"
		"-p" = "$nrpe_port$"
		"-c" = "$nrpe_command$"
		"-n" = {
			set_if = "$nrpe_no_ssl$"
			description = "Do not use SSL."
		}
		"-u" = {
			set_if = "$nrpe_timeout_unknown$"
			description = "Make socket timeouts return an UNKNOWN state instead of CRITICAL"
		}
		"-t" = "$nrpe_timeout$"
		"-a" = {
			value = "$nrpe_arguments$"
			repeat_key = false
			order = 1
		}
	}

	vars.nrpe_address = "$address$"
	vars.nrpe_no_ssl = false
	vars.nrpe_timeout_unknown = false

	timeout = 5m
}

object CheckCommand "hpjd" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_hpjd" ]

	arguments = {
		"-H" = "$hpjd_address$"
		"-C" = "$hpjd_community$"
		"-p" = "$hpjd_port$"
	}

	vars.hpjd_address = "$address$"
}

object CheckCommand "icmp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_icmp" ]

	arguments = {
		"-H" = {
			value = "$icmp_address$"
			repeat_key = false
			order = 1
		}
		"-w" = "$icmp_wrta$,$icmp_wpl$%"
		"-c" = "$icmp_crta$,$icmp_cpl$%"
		"-s" = "$icmp_source$"
		"-n" = "$icmp_packets$"
		"-i" = "$icmp_packet_interval$"
		"-I" = "$icmp_target_interval$"
		"-m" = "$icmp_hosts_alive$"
		"-b" = "$icmp_data_bytes$"
		"-t" = "$icmp_timeout$"
	}

	vars.icmp_address = "$address$"
	vars.icmp_wrta = 100
	vars.icmp_wpl = 5
	vars.icmp_crta = 200
	vars.icmp_cpl = 15
}

/* Contrib plugins */
object CheckCommand "running_kernel" {
	import "plugin-check-command"

	command = [ "sudo", PluginDir + "/check_running_kernel" ]
}