/******************************************************************************
 * Icinga 2                                                                   *
 * Copyright (C) 2012-2015 Icinga Development Team (http://www.icinga.org)    *
 *                                                                            *
 * This program is free software; you can redistribute it and/or              *
 * modify it under the terms of the GNU General Public License                *
 * as published by the Free Software Foundation; either version 2             *
 * of the License, or (at your option) any later version.                     *
 *                                                                            *
 * This program is distributed in the hope that it will be useful,            *
 * but WITHOUT ANY WARRANTY; without even the implied warranty of             *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the              *
 * GNU General Public License for more details.                               *
 *                                                                            *
 * You should have received a copy of the GNU General Public License          *
 * along with this program; if not, write to the Free Software Foundation     *
 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.             *
 ******************************************************************************/

template CheckCommand "ipv4-or-ipv6" {
	vars.check_address = {{
		var addr_v4 = macro("$address$")
		var addr_v6 = macro("$address6$")

		if (addr_v4) {
			return addr_v4
		} else {
			return addr_v6
		}
	}}
}

template CheckCommand "ping-common" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_ping" ]

	arguments = {
		"-H" = "$ping_address$"
		"-w" = "$ping_wrta$,$ping_wpl$%"
		"-c" = "$ping_crta$,$ping_cpl$%"
		"-p" = "$ping_packets$"
		"-t" = "$ping_timeout$"
	}

	vars.ping_wrta = 100
	vars.ping_wpl = 5
	vars.ping_crta = 200
	vars.ping_cpl = 15
}

object CheckCommand "ping" {
	import "ping-common"
	import "ipv4-or-ipv6"

	vars.ping_address = "$check_address$"
}

object CheckCommand "ping4" {
	import "ping-common"

	command += [ "-4" ]

	vars.ping_address = "$address$"
}

object CheckCommand "ping6" {
	import "ping-common"

	command += [ "-6" ]

	vars.ping_address = "$address6$"
}

template CheckCommand "hostalive-common" {
	vars.ping_wrta = 3000.0
	vars.ping_wpl = 80

	vars.ping_crta = 5000.0
	vars.ping_cpl = 100
}

object CheckCommand "hostalive" {
	import "ping"
	import "hostalive-common"
}

object CheckCommand "hostalive4" {
	import "ping4"
	import "hostalive-common"
}

object CheckCommand "hostalive6" {
	import "ping6"
	import "hostalive-common"
}

template CheckCommand "fping-common" {
	import "plugin-check-command"

	command = [
		PluginDir + "/check_fping",
		"$fping_address$"
	]

	arguments = {
		"-w" = "$fping_wrta$,$fping_wpl$%"
		"-c" = "$fping_crta$,$fping_cpl$%"
		"-n" = "$fping_number$"
		"-i" = "$fping_interval$"
		"-b" = "$fping_bytes$"
		"-T" = "$fping_target_timeout$"
		"-S" = "$fping_source_ip$"
		"-I" = "$fping_source_interface$"
	}

	vars.fping_wrta = 100
	vars.fping_wpl = 5
	vars.fping_crta = 200
	vars.fping_cpl = 15
	vars.fping_number = 5
	vars.fping_interval = 500
}

object CheckCommand "fping4" {
	import "fping-common"

	command += [ "-4" ]

	vars.fping_address = "$address$"
}

object CheckCommand "fping6" {
	import "fping-common"

	command += [ "-6" ]

	vars.fping_address = "$address6$"
}

object CheckCommand "dummy" {
	import "plugin-check-command"

	command = [
		PluginDir + "/check_dummy",
		"$dummy_state$",
		"$dummy_text$"
	]

	vars.dummy_state = 0
	vars.dummy_text = "Check was successful."
}

object CheckCommand "passive" {
	import "dummy"

	vars.dummy_state = 3
	vars.dummy_text = "No Passive Check Result Received."
}

object CheckCommand "tcp" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_tcp" ]

	arguments = {
		"-H" = {
			value =  "$tcp_address$"
			description = "Host name, IP Address, or unix socket (must be an absolute path)."
		}
		"-p" = {
			value =  "$tcp_port$"
			description = "The TCP port number."
		}
		"-e" = {
			value = "$tcp_expect$"
			description = "String to expect in server response (may be repeated)."
		}
		"-A" = {
			set_if = "$tcp_all$"
			description = "All expect strings need to occur in server response. Defaults to false."
		}
		"-E_send" = {
			key = "-E"
			order = 1
			set_if = "$tcp_escape_send$"
			description = "Enable usage of \n, \r, \t or \\ in send string."
		}
		"-s" = {
			order = 2
			value = "$tcp_send$"
			description = "String to send to the server."
		}
		"-E_quit" = {
			key = "-E"
			order = 3
			set_if = "$tcp_escape_quit$"
			description = "Enable usage of \n, \r, \t or \\ in quit string."
		}
		"-q" = {
			order = 4
			value = "$tcp_quit$"
			description = "String to send server to initiate a clean close of the connection."
		}
		"-r" = {
			value = "$tcp_refuse$"
			description = "Accept TCP refusals with states ok, warn, crit. Defaults to crit."
		}
		"-M" = {
			value = "$tcp_mismatch$"
			description = "Accept expected string mismatches with states ok, warn, crit. Defaults to warn."
		}
		"-j" = {
			set_if = "$tcp_jail$"
			description = "Hide output from TCP socket."
		}
		"-m" = {
			value = "$tcp_maxbytes$"
			description = "Close connection once more than this number of bytes are received."
		}
		"-d" = {
			value = "$tcp_delay$"
			description = "Seconds to wait between sending string and polling for response."
		}
		"-D" = {
			value = "$tcp_certificate$"
			description = "Minimum number of days a certificate has to be valid. 1st value is number of days for warning, 2nd is critical (if not specified: 0) - seperated by comma."
		}
		"-S" = {
			set_if = "$tcp_ssl$"
			description = "Use SSL for the connection."
		}
		"-w" = {
			value = "$tcp_wtime$"
			description = "Response time to result in warning status (seconds)."
		}
		"-c" = {
			value = "$tcp_ctime$"
			description = "Response time to result in critical status (seconds)."
		}
		"-t" = {
			value = "$tcp_timeout$"
			description = "Seconds before connection times out. Defaults to 10."
		}
	}

	vars.tcp_address = "$check_address$"
	vars.tcp_all = false
	vars.tcp_refuse = "crit"
	vars.tcp_mismatch = "warn"
	vars.tcp_timeout = 10
}

object CheckCommand "ssl" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_tcp" ]

	arguments = {
		"-H" = "$ssl_address$"
		"-p" = "$ssl_port$"
		"--ssl" = { }
		"--timeout" = "$ssl_timeout$"
		"-D" = "$ssl_cert_valid_days_warn$,$ssl_cert_valid_days_critical$"
	}

	vars.ssl_address = "$check_address$"
}

object CheckCommand "udp" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [
		PluginDir + "/check_udp",
		"-H", "$udp_address$",
		"-p", "$udp_port$"
	]

	arguments = {
		"-s" = {
			value = "$udp_send$"
			required = true
		}
		"-e" = {
			value = "$udp_expect$"
			required = true
		}
		"-q" = "$udp_quit$"
	}

	vars.udp_address = "$check_address$"
}

object CheckCommand "http" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_http" ]

	arguments = {
		"-H" = "$http_vhost$"
		"-I" = "$http_address$"
		"-u" = "$http_uri$"
		"-p" = "$http_port$"
		"-S" = {
			set_if = "$http_ssl$"
		}
		"--sni" = {
			set_if = "$http_sni$"
		}
		"-C" = {
			value = "$http_certificate$"
			description = "Minimum number of days a certificate has to be valid. Port defaults to 443."
		}
		"-J" = {
			value = "$http_clientcert$"
			description = "Name of file contains the client certificate (PEM format)"
		}
		"-K" = {
			value = "$http_privatekey$"
			description = "Name of file contains the private key (PEM format)"
		}
		"-a" = {
			value = "$http_auth_pair$"
			description = "Username:password on sites with basic authentication"
		}
		"--no-body" = {
			set_if = "$http_ignore_body$"
		}
		"-w" = "$http_warn_time$"
		"-c" = "$http_critical_time$"
		"-e" = "$http_expect$"
		"-d" = {
			value = "$http_headerstring$"
			description = "String to expect in the response headers"
		}
		"-s" = {
			value = "$http_string$"
			description = "String to expect in the content"
		}
		"-P" = {
			value = "$http_post$"
			description = "URL encoded http POST data"
		}
		"-j" = {
			value = "$http_method$"
			description = "Set http method (for example: HEAD, OPTIONS, TRACE, PUT, DELETE)"
		}
		"-M" = {
			value = "$http_maxage$"
			description = "Warn if document is more than seconds old"
		}
		"-T" = {
			value = "$http_contenttype$"
			description = "Specify Content-Type header when POSTing"
		}
		"-l" = {
			set_if = "$http_linespan$"
			description = "Allow regex to span newline"
			order = 1
		}
		"-r" = {
			value = "$http_expect_body_regex$"
			description = "Search page for regex"
			order = 2
		}
		"-R" = {
			value = "$http_expect_body_eregi$"
			description = "Search page for case-insensitive regex"
			order = 2
		}
		"--invert-regex" = {
			set_if = "$http_invertregex$"
			description = "Return CRITICAL if found, OK if not"
		}
		"-b" = {
			value = "$http_proxy_auth_pair$"
			description = "Username:password on proxy-servers with basic authentication"
		}
		"-A" = {
			value = "$http_useragent$"
			description = "String to be sent in http header as User Agent"
		}
		"-k" = {
			value = "$http_header$"
			description = "Any other tags to be sent in http header"
		}
		"-E" = {
			set_if = "$http_extendedperfdata$"
			description = "Print additional perfdata"
		}
		"-f" = {
			value = "$http_onredirect$"
			description = "How to handle redirect pages"
		}
		"-m" = {
			value = "$http_pagesize$"
			description = "Minim page size required:Maximum page size required"
		}
		"-t" = {
			value = "$http_timeout$"
			description = "Seconds before connection times out"
		}
	}

	vars.http_address = "$check_address$"
	vars.http_ssl = false
	vars.http_sni = false
	vars.http_linespan = false
	vars.http_invertregex = false
}

object CheckCommand "ftp" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_ftp" ]

	arguments = {
		"-H" = {
			value = "$ftp_address$"
			description = "The host's address. Defaults to $address$ or $address6$ if the address attribute is not set."
		}
		"-p" = {
			value = "$ftp_port$"
			description = "The FTP port number. Defaults to none"
		}
		"-e" = {
			value = "$ftp_expect$"
			description = "String to expect in server response (may be repeated)."
		}
		"-A" = {
			set_if = "$ftp_all$"
			description = "All expect strings need to occur in server response. Default is any."
		}
		"-E_send" = {
			key = "-E"
			order = 1
			set_if = "$ftp_escape_send$"
			description = "Enable usage of \n, \r, \t or \\ in send string. Default is nothing."
		}
		"-s" = {
			order = 2
			value = "$ftp_send$"
			description = "String to send to the server."
		}
		"-E_quit" = {
			key = "-E"
			order = 3
			set_if = "$ftp_escape_quit$"
			description = "Can use \n, \r, \t or \\ in quit string. Default is \r\n added to end of quit."
		}
		"-q" = {
			order = 4
			value = "$ftp_quit$"
			description = "String to send server to initiate a clean close of the connection."
		}
		"-r" = {
			value = "$ftp_refuse$"
			description = "Accept TCP refusals with states ok, warn, crit. Defaults to crit."
		}
		"-M" = {
			value = "$ftp_mismatch$"
			description = "Accept expected string mismatches with states ok, warn, crit. Defaults to warn."
		}
		"-j" = {
			set_if = "$ftp_jail$"
			description = "Hide output from TCP socket."
		}
		"-m" = {
			value = "$ftp_maxbytes$"
			description = "Close connection once more than this number of bytes are received."
		}
		"-d" = {
			value = "$ftp_delay$"
			description = "Seconds to wait between sending string and polling for response."
		}
		"-D" = {
			value = "$ftp_certificate$"
			description = "Minimum number of days a certificate has to be valid. 1st value is number of days for warning, 2nd is critical (if not specified: 0) - seperated by comma."
		}
		"-S" = {
			set_if = "$ftp_ssl$"
			description = "Use SSL for the connection."
		}
		"-w" = {
			value = "$ftp_wtime$"
			description = "Response time to result in warning status (seconds)."
		}
		"-c" = {
			value = "$ftp_ctime$"
			description = "Response time to result in critical status (seconds)."
		}
		"-t" = {
			value = "$ftp_timeout$"
			description = "Seconds before connection times out. Defaults to 10."
		}
	}

	vars.ftp_address = "$check_address$"
	vars.ftp_ssl = false
	vars.ftp_refuse = "crit"
	vars.ftp_mismatch = "warn"
	vars.ftp_timeout = 10
}

object CheckCommand "smtp" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_smtp" ]

	arguments = {
		"-H" = "$smtp_address$"
		"-p" = "$smtp_port$"
		"-f" = "$smtp_mail_from$"
		"-e" = "$smtp_expect$"
		"-C" = "$smtp_command$"
		"-R" = "$smtp_response$"
		"-F" = "$smtp_helo_fqdn$"
		"-D" = "$smtp_certificate_age$"
		"-S" = "$smtp_starttls$"
		"-A" = "$smtp_authtype$"
		"-U" = "$smtp_authuser$"
		"-P" = "$smtp_authpass$"
		"-q" = "$smtp_ignore_quit$"
		"-w" = "$smtp_warning$"
		"-c" = "$smtp_critical$"
		"-t" = "$smtp_timeout$"
	}

	vars.smtp_address = "$check_address$"
}

object CheckCommand "ssmtp" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_ssmtp" ]
	arguments = {
		"-H" = "$ssmtp_address$"
		"-p" = "$ssmtp_port$"
	}

	vars.ssmtp_address = "$check_address$"
}

object CheckCommand "imap" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_imap" ]

	arguments = {
		"-H" = "$imap_address$"
		"-p" = "$imap_port$"
	}

	vars.imap_address = "$check_address$"
}

object CheckCommand "simap" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	  command = [ PluginDir + "/check_simap" ]

	arguments = {
		"-H" = "$simap_address$"
		"-p" = "$simap_port$"
	}

	vars.simap_address = "$check_address$"
}

object CheckCommand "pop" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_pop" ]

	arguments = {
		"-H" = "$pop_address$"
		"-p" = "$pop_port$"
	}

	vars.pop_address = "$check_address$"
}

object CheckCommand "spop" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_spop" ]

	arguments = {
		"-H" = "$spop_address$"
		"-p" = "$spop_port$"
	}

	vars.spop_address = "$check_address$"
}

object CheckCommand "ntp_time" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_ntp_time" ]

	arguments = {
		"-H" = "$ntp_address$"
		"-p" = "$ntp_port$"
		"-q" = "$ntp_quit$"
		"-w" = "$ntp_warning$"
		"-c" = "$ntp_critical$"
		"-o" = "$ntp_timeoffset$"
		"-t" = "$ntp_timeout$"
	}

	vars.ntp_address = "$check_address$"
}

object CheckCommand "ntp_peer" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_ntp_peer" ]

	arguments = {
		"-H" = "$ntp_address$"
		"-p" = "$ntp_port$"
		"-w" = "$ntp_warning$"
		"-c" = "$ntp_critical$"
		"-W" = "$ntp_wstratum$"
		"-C" = "$ntp_cstratum$"
		"-j" = "$ntp_wjitter$"
		"-k" = "$ntp_cjitter$"
		"-m" = "$ntp_wsource$"
		"-n" = "$ntp_csource$"
		"-t" = "$ntp_timeout$"
	}

	vars.ntp_address = "$check_address$"
}

object CheckCommand "ssh" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_ssh" ]

	arguments = {
		"-p" = "$ssh_port$"
		"-t" = "$ssh_timeout$"
		"host" = {
			value = "$ssh_address$"
			skip_key = true
			order = 1
		}
	}

	vars.ssh_address = "$check_address$"
}

object CheckCommand "disk" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_disk" ]

	arguments = {
		"-w" = {
			value = "$disk_wfree$"
			description = "Exit with WARNING status if less than INTEGER units of disk are free or Exit with WARNING status if less than PERCENT of disk space is free"
			required = true
			order = -3
		}

		"-c" = {
			value = "$disk_cfree$"
			description = "Exit with CRITICAL status if less than INTEGER units of disk are free or Exit with CRITCAL status if less than PERCENT of disk space is free"
			required = true
			order = -3
		}

		"-W" = {
			value = "$disk_inode_wfree$"
			description = "Exit with WARNING status if less than PERCENT of inode space is free"
		}

		"-K" = {
			value = "$disk_inode_cfree$"
			description = "Exit with CRITICAL status if less than PERCENT of inode space is free"
		}

		"-p" = {
			value = "$disk_partitions$"
			description = "Path or partition (may be repeated)"
			repeat_key = true
			order = 1
		}

		"-p_old" = {
			key = "-p"
			value = "$disk_partition$"
			order = 1
		}

		"-x" = {
			value = "$disk_partitions_excluded$"
			description = "Ignore device (only works if -p unspecified)"
		}

		"-x_old" = {
			key = "-x"
			value = "$disk_partition_excluded$"
		}

		"-C" = {
			set_if = "$disk_clear$"
			description = "Clear thresholds"
		}

		"-E" = {
			set_if = "$disk_exact_match$"
			description = "For paths or partitions specified with -p, only check for exact paths"
		}

		"-e" = {
			set_if = "$disk_errors_only$"
			description = "Display only devices/mountpoints with errors"
		}

		"-g" = {
			value = "$disk_group$"
			description = "Group paths. Thresholds apply to (free-)space of all partitions together"
		}

		"-k" = {
			set_if = "$disk_kilobytes$"
			description = "Same as --units kB"
		}

		"-l" = {
			set_if = "$disk_local$"
			description = " Only check local filesystems"
		}

		"-L" = {
			set_if = "$disk_stat_remote_fs$"
			description = "Only check local filesystems against thresholds. Yet call stat on remote filesystems to test if they are accessible (e.g. to detect Stale NFS Handles)"
		}

		"-M" = {
			set_if = "$disk_mountpoint$"
			description = "Display the mountpoint instead of the partition"
		}

		"-m" = {
			set_if = "$disk_megabytes$"
			description = "Same as --units MB"
		}

		"-A" = {
			set_if = "$disk_all$"
			description = "Explicitly select all paths. This is equivalent to -R .*"
		}

		"-R" = {
			value = "$disk_eregi_path$"
			description = "Case insensitive regular expression for path/partition (may be repeated)"
			repeat_key = true
		}

		"-r" = {
			value = "$disk_ereg_path$"
			description = "Regular expression for path or partition (may be repeated)"
			repeat_key = true
		}

		"-I" = {
			value = "$disk_ignore_eregi_path$"
			description = "Regular expression to ignore selected path/partition (case insensitive) (may be repeated)"
			repeat_key = true
			order = 2
		}

		"-i" = {
			value = "$disk_ignore_ereg_path$"
			description = "Regular expression to ignore selected path or partition (may be repeated)"
			repeat_key = true
			order = 2
		}

		"-t" = {
			value = "$disk_timeout$"
			description = "Seconds before connection times out (default: 10)"
		}

		"-u" = {
			value = "$disk_units$"
			description = "Choose bytes, kB, MB, GB, TB (default: MB)"
		}

		"-X" = {
			value = "$disk_exclude_type$"
			description = "Ignore all filesystems of indicated type (may be repeated)"
			repeat_key = true
		}
	}

	vars.disk_wfree = "20%"
	vars.disk_cfree = "10%"
	vars.disk_inode_wfree = "20%"
	vars.disk_inode_cfree = "10%"
	vars.disk_megabytes = true
	vars.disk_exclude_type = ["none", "tmpfs", "sysfs", "proc", "devtmpfs", "devfs", "mtmfs"]
}

object CheckCommand "disk_smb" {
        import "plugin-check-command"

        command = [ PluginDir + "/check_disk_smb" ]

        arguments = {
                "-H" = {
                        value = "$disk_smb_hostname$"
                        description = "NetBIOS name of the server."
                }
                "-s" = {
                        value = "$disk_smb_share$"
                        description = "Share name to be tested."
                }
                "-W" = {
                        value = "$disk_smb_workgroup$"
                        description = "Workgroup or Domain used (Defaults to 'WORKGROUP' if omitted)."
                }
                "-a" = {
                        value = "$disk_smb_address$"
                        description = "IP-address of HOST (only necessary if HOST is in another network)."
                }
                "-u" = {
                        value = "$disk_smb_username$"
                        description = "Username to log in to server. (Defaults to 'guest' if omitted)."
                }
                "-p" = {
                        value = "$disk_smb_password$"
                        description = "Password to log in to server. (Defaults to an empty password if omitted)."
                }
                "-w" = {
                        value = "$disk_smb_wused$"
                        description = "Percent of used space at which a warning will be generated (Default: 85%)."
                }
                "-c" = {
                        value = "$disk_smb_cused$"
                        description = "Percent of used space at which a critical will be generated (Defaults: 95%)"
                }
                "-P" = {
                        value = "$disk_smb_port$"
                        description = "Port to be used to connect to. Some Windows boxes use 139, others 445 (Defaults to smbclient default if omitted)."
                }
        }

	vars.disk_smb_wused = "85%"
	vars.disk_smb_cused = "95%"
}

object CheckCommand "users" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_users" ]

	arguments = {
		"-w" = "$users_wgreater$"
		"-c" = "$users_cgreater$"
	}

	vars.users_wgreater = 20
	vars.users_cgreater = 50
}

object CheckCommand "procs" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_procs" ]

	arguments = {
		"-w" = {
			value = "$procs_warning$"
			description = "Generate warning state if metric is outside this range" 
		}
		"-c" = {
			value = "$procs_critical$"
			description = "Generate critical state if metric is outside this range" 
		}
		"-m" = {
			value = "$procs_metric$"
			description = "Check thresholds against metric" 
		}
		"-t" = {
			value = "$procs_timeout$"
			description = "Seconds before plugin times out"
		}
		"-T" = {
			set_if = "$procs_traditional$"
			description = "Filter own process the traditional way by PID instead of /proc/pid/exe"
		}
		"-s" = {
			value = "$procs_state$"
			description = "Only scan for processes that have one or more of the status flags you specify"
		}
		"-p" = {
			value = "$procs_ppid$"
			description = "Only scan for children of the parent process ID indicated"
		}
		"-z" = {
			value = "$procs_vsz$"
			description = "Only scan for processes with VSZ higher than indicated"
		}
		"-r" = {
			value = "$procs_rss$"
			description = "Only scan for processes with RSS higher than indicated"
		}
		"-P" = {
			value = "$procs_pcpu$"
			description = "Only scan for processes with PCPU higher than indicated"
		}
		"-u" = {
			value = "$procs_user$"
			description = "Only scan for processes with user name or ID indicated"
		}
		"-a" = {
			value = "$procs_argument$"
			description = "Only scan for processes with args that contain STRING"
		}
		"--ereg-argument-array" = {
			value = "$procs_argument_regex$"
			description = "Only scan for processes with args that contain the regex STRING"
		}
		"-C" = {
			value = "$procs_command$"
			description = "Only scan for exact matches of COMMAND (without path)"
		}
		"-k" = {
			set_if = "$procs_nokthreads$"
			description = "Only scan for non kernel threads"
		}
	}

	vars.procs_traditional = false
	vars.procs_nokthreads = false
	vars.procs_warning = 250
	vars.procs_critical = 400
}

object CheckCommand "swap" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_swap" ]

	arguments = {
		"-w" = "$swap_wfree$%"
		"-c" = "$swap_cfree$%"
	}

	vars.swap_wfree = 50
	vars.swap_cfree = 25
}

object CheckCommand "load" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_load" ]

	arguments = {
		"-w" = "$load_wload1$,$load_wload5$,$load_wload15$"
		"-c" = "$load_cload1$,$load_cload5$,$load_cload15$"
	}

	vars.load_wload1 = 5.0
	vars.load_wload5 = 4.0
	vars.load_wload15 = 3.0

	vars.load_cload1 = 10.0
	vars.load_cload5 = 6.0
	vars.load_cload15 = 4.0
}

object CheckCommand "snmp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_snmp" ]

	arguments = {
		"-H" = "$snmp_address$"
		"-o" = "$snmp_oid$"
		"-C" = "$snmp_community$"
		"-c" = "$snmp_crit$"
		"-w" = "$snmp_warn$"
		"-s" = "$snmp_string$"
		"-r" = "$snmp_ereg$"
		"-R" = "$snmp_eregi$"
		"-l" = "$snmp_label$"
		"-u" = "$snmp_units$"
		"-t" = "$snmp_timeout$"
		"--invert-search" = {
			set_if = "$snmp_invert_search$"
			description = "Invert search result and return CRITICAL if found"
		}
		"-P" = "$snmp_version$"
		"-m" = "$snmp_miblist$"
		"--rate-multiplier" = "$snmp_rate_multiplier$"
		"--rate" = {
			set_if = "$snmp_rate$"
			description = "Enable rate calculation"
		}
		"-n" = {
			set_if = "$snmp_getnext$"
			description = "Use SNMP GETNEXT instead of SNMP GET"
		}
	}

	vars.snmp_address = {{
		var addr_v4 = macro("$address$")
		var addr_v6 = macro("$address6$")

		if (addr_v4) {
			return addr_v4
		} else {
			return "udp6:[" + addr_v6 + "]"
		}
	}}

	vars.snmp_community = "public"
	vars.snmp_invert_search = false
	vars.snmp_timeout = "10"
}

object CheckCommand "snmpv3" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_snmp" ]

	arguments = {
		"-H" = "$snmpv3_address$"
		"-P" = 3
		"--seclevel" = "$snmpv3_seclevel$"
		"-U" = "$snmpv3_user$"
		"-a" = "$snmpv3_auth_alg$"
		"-A" = "$snmpv3_auth_key$"
		"-x" = "$snmpv3_priv_alg$"
		"-X" = "$snmpv3_priv_key$"
		"-o" = "$snmpv3_oid$"
		"-c" = "$snmpv3_crit$"
		"-w" = "$snmpv3_warn$"
		"-l" = "$snmpv3_label$"
	}

	vars.snmpv3_address = "$check_address$"
	vars.snmpv3_auth_alg = "SHA"
	vars.snmpv3_priv_alg = "AES"
	vars.snmpv3_seclevel = "authPriv"
}

object CheckCommand "snmp-uptime" {
	import "snmp"

	vars.snmp_oid = "1.3.6.1.2.1.1.3.0"
}

object CheckCommand "apt" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_apt" ]
}

object CheckCommand "dhcp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_dhcp" ]

	arguments = {
		"-s" = "$dhcp_serverip$"
		"-r" = "$dhcp_requestedip$"
		"-t" = "$dhcp_timeout$"
		"-i" = "$dhcp_interface$"
		"-m" = "$dhcp_mac$"
		"-u" = {
			set_if = "$dhcp_unicast$"
		}
	}

	vars.dhcp_unicast = false
}

object CheckCommand "dns" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_dns" ]

	arguments = {
		"-H" = {
			value = "$dns_lookup$"
			description = "The name or address you want to query."
		}
		"-s" = {
			value = "$dns_server$"
			description = "Optional DNS server you want to use for the lookup."
		}
		"-a" = {
			value = "$dns_expected_answers$"
			description = "Optional ip address or host you expect the DNS server to return. Host must end with a dot (.). This option can be repeated multiple times (Returns OK if any value match). If multiple addresses are returned at once, you have to match the whole string of addresses separated with commas (sorted alphabetically)."
		}
		"-a_old" = {
			key = "-a"
			value ="$dns_expected_answer$"
		}
		"-A" = {
			set_if = "$dns_authoritative$"
		}
		"-w" = {
			value = "$dns_wtime$"
			description = "Return warning if elapsed time exceeds value."
		}
		"-c" = {
			value = "$dns_ctime$"
			description = "Return critical if elapsed time exceeds value."
		}
		"-t" = {
			value = "$dns_timeout$"
			description = "Seconds before connection times out. Defaults to 10."
		}
	}

	vars.dns_lookup = "$host.name$"
	vars.dns_expected_answer = "$check_address$"
	vars.dns_timeout = 10
}

object CheckCommand "dig" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_dig" ]

	arguments = {
		"-H" = "$dig_server$"
		"-l" = "$dig_lookup$"
	}

	vars.dig_server = "$check_address$"
}

object CheckCommand "nscp" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_nt" ]

	arguments = {
		"-H" = "$nscp_address$"
		"-p" = "$nscp_port$"
		"-s" = "$nscp_password$"
		"-v" = {
			value = "$nscp_variable$"
			required = true
		}
		"-l" = {
			value = "$nscp_params$"
			repeat_key = false
		}
		"-w" = "$nscp_warn$"
		"-c" = "$nscp_crit$"
		"-t" = "$nscp_timeout$"
		"-d" = {
			value = "SHOWALL"
			description = "Use with SERVICESTATE to see working services or PROCSTATE for running processes"
			set_if = "$nscp_showall$"
		}
	}

	vars.nscp_address = "$check_address$"
	vars.nscp_port = 12489
	vars.nscp_showall = false
}

object CheckCommand "by_ssh" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_by_ssh" ]

	arguments = {
		"-H" = "$by_ssh_address$"
		"-p" = "$by_ssh_port$"
		"-C" = "$by_ssh_command$"
		"-l" = "$by_ssh_logname$"
		"-i" = "$by_ssh_identity$"
		"-q" = {
			set_if = "$by_ssh_quiet$"
		}
		"-w" = "$by_ssh_warn$"
		"-c" = "$by_ssh_crit$"
		"-t" = "$by_ssh_timeout$"
	}

	vars.by_ssh_address = "$check_address$"
	vars.by_ssh_quiet = false
}

object CheckCommand "ups" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_ups" ]

	arguments = {
		"-H" = {
			value = "$ups_address$"
			description = "Address of the upsd server"
			required = true
		}
		"-u" = {
			value = "$ups_name$"
			description = "Name of the UPS to monitor"
			required = true
		}
		"-p" = {
			value = "$ups_port$"
			description = "Port number (default: 3493)"
		}
		"-v" = {
			value = "$ups_variable$"
			description = "Variable to monitor, valid strings are LINE, TEMP, BATTPCT or LOADPCT"
		}
		"-w" = {
			value = "$ups_warning$"
			description = "Warning threshold for the selected variable"
		}
		"-c" = {
			value = "$ups_critical$"
			description = "Critical threshold for the selected variable"
		}
		"-T" = {
			set_if = "$ups_celsius$"
			description = "Display temperature in degrees Celsius instead of Fahrenheit"
		}
		"-t" = {
			value = "$ups_timeout$"
			description = "Seconds before the connection times out (default: 10)"
		}
	}

	vars.ups_address = "$check_address$"
	vars.ups_name = "ups"
}

object CheckCommand "nrpe" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_nrpe" ]

 	arguments = {
		"-H" = "$nrpe_address$"
		"-p" = "$nrpe_port$"
		"-c" = "$nrpe_command$"
		"-n" = {
			set_if = "$nrpe_no_ssl$"
			description = "Do not use SSL."
		}
		"-u" = {
			set_if = "$nrpe_timeout_unknown$"
			description = "Make socket timeouts return an UNKNOWN state instead of CRITICAL"
		}
		"-t" = "$nrpe_timeout$"
		"-a" = {
			value = "$nrpe_arguments$"
			repeat_key = false
			order = 1
		}
	}

	vars.nrpe_address = "$check_address$"
	vars.nrpe_no_ssl = false
	vars.nrpe_timeout_unknown = false

	timeout = 5m
}

object CheckCommand "hpjd" {
	import "plugin-check-command"
	import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_hpjd" ]

	arguments = {
		"-H" = "$hpjd_address$"
		"-C" = "$hpjd_community$"
		"-p" = "$hpjd_port$"
	}

	vars.hpjd_address = "$check_address$"
}

object CheckCommand "icmp" {
	import "plugin-check-command"

	command = [ PluginDir + "/check_icmp" ]

	arguments = {
		"-H" = {
			value = "$icmp_address$"
			repeat_key = false
			order = 1
		}
		"-w" = "$icmp_wrta$,$icmp_wpl$%"
		"-c" = "$icmp_crta$,$icmp_cpl$%"
		"-s" = "$icmp_source$"
		"-n" = "$icmp_packets$"
		"-i" = "$icmp_packet_interval$"
		"-I" = "$icmp_target_interval$"
		"-m" = "$icmp_hosts_alive$"
		"-b" = "$icmp_data_bytes$"
		"-t" = "$icmp_timeout$"
	}

	vars.icmp_address = "$address$"
	vars.icmp_wrta = 100
	vars.icmp_wpl = 5
	vars.icmp_crta = 200
	vars.icmp_cpl = 15
}

object CheckCommand "ldap" {
    import "plugin-check-command"
    import "ipv4-or-ipv6"

	command = [ PluginDir + "/check_ldap" ]

	arguments = {
		"-H" = {
			value = "$ldap_address$"
			description = "Host name, IP Address, or unix socket (must be an absolute path)"
		}
		"-p" = {
			value = "$ldap_port$"
			description = "Port number (default: 389)"
		}
		"-a" = {
			value = "$ldap_attr$"
			description = "ldap attribute to search (default: \"(objectclass=*)\""
		}
		"-b" = {
			value = "$ldap_base$"
			required = true
			description = "ldap base (eg. ou=my unit, o=my org, c=at"
		}
		"-D" = {
			value = "$ldap_bind$"
			description = "ldap bind DN (if required)"
		}
		"-P" = {
			value = "$ldap_pass$"
			description = "ldap password (if required)"
		}
		"-T" = {
			set_if = "$ldap_starttls$"
			description = "use starttls mechanism introduced in protocol version 3"
		}
		"-S" = {
			set_if = "$ldap_ssl$"
			description = "use ldaps (ldap v2 ssl method). this also sets the default port to 636"
		}
		"-2" = {
			set_if = "$ldap_v2$"
			description = "Use LDAP protocol version 2"
		}
		"-3" = {
			set_if = "$ldap_v3$"
			description = "Use LDAP protocol version 3"
		}
		"-w" = {
			value = "$ldap_warning$"
			description = "Response time to result in warning status (seconds)"
		}
		"-c" = {
			value = "$ldap_critical$"
			description = "Response time to result in critical status (seconds)"
		}
		"-t" = {
			value = "$ldap_timeout$"
			description = "Seconds before connection times out (default: 10)"
		}
		"-v" = {
			set_if = "$ldap_verbose$"
			description = "Show details for command-line debugging"
		}
	}

	vars.ldap_address = "$check_address$"
	vars.ldap_v2 = true
	vars.ldap_v3 = false
	vars.ldap_timeout = 10s
	vars.ldap_verbose = false
}