mirror of https://github.com/FDOS/kernel.git
Bart enhanced EXEFLAT for smaller packed binary; now calls UPX itself
git-svn-id: https://svn.code.sf.net/p/freedos/svn/kernel/branches/UNSTABLE@1063 6ac86273-5f31-0410-b378-82cca8765d1b
This commit is contained in:
parent
279107ab8e
commit
b7a86735a2
|
@ -3,6 +3,8 @@
|
||||||
+ Changes Bart
|
+ Changes Bart
|
||||||
* int2f.asm
|
* int2f.asm
|
||||||
- bugfix: call_nls: DI register was not preserved
|
- bugfix: call_nls: DI register was not preserved
|
||||||
|
* exeflat.c
|
||||||
|
- new version exploiting better UPX compression for SYS files; calls UPX itself
|
||||||
+ Changes Tom
|
+ Changes Tom
|
||||||
* inthndlr.c
|
* inthndlr.c
|
||||||
- improve handling of case where eg. FindFirst(I:\*.*) fails, causes Int24,
|
- improve handling of case where eg. FindFirst(I:\*.*) fails, causes Int24,
|
||||||
|
|
|
@ -31,7 +31,6 @@ all: ..\bin\$(TARGET).sys ..\bin\country.sys
|
||||||
|
|
||||||
..\bin\$(TARGET).sys: $(TARGET).lnk $(OBJS) $(LIBS) ..\utils\exeflat.exe
|
..\bin\$(TARGET).sys: $(TARGET).lnk $(OBJS) $(LIBS) ..\utils\exeflat.exe
|
||||||
$(LINK) @$(TARGET).lnk;
|
$(LINK) @$(TARGET).lnk;
|
||||||
$(XUPX) kernel.exe
|
|
||||||
..\utils\exeflat kernel.exe $*.sys $(LOADSEG) -S0x10 -S0x8B $(UPXOPT)
|
..\utils\exeflat kernel.exe $*.sys $(LOADSEG) -S0x10 -S0x8B $(UPXOPT)
|
||||||
copy $*.sys ..\bin\kernel.sys
|
copy $*.sys ..\bin\kernel.sys
|
||||||
|
|
||||||
|
|
|
@ -279,7 +279,7 @@ int FDKrnConfigMain(int argc, char **argv);
|
||||||
#define OEMKERNEL "IBMBIO.COM"
|
#define OEMKERNEL "IBMBIO.COM"
|
||||||
#define OEMDOS "IBMDOS.COM"
|
#define OEMDOS "IBMDOS.COM"
|
||||||
#define MSKERNEL "IO.SYS"
|
#define MSKERNEL "IO.SYS"
|
||||||
#define MSDOS "MSDOS.SYS"
|
#define MS_DOS "MSDOS.SYS"
|
||||||
#define FDLOADSEG 0x60
|
#define FDLOADSEG 0x60
|
||||||
#define OEMLOADSEG 0x70
|
#define OEMLOADSEG 0x70
|
||||||
|
|
||||||
|
@ -523,7 +523,7 @@ int main(int argc, char **argv)
|
||||||
{
|
{
|
||||||
char *dosfn = OEMDOS;
|
char *dosfn = OEMDOS;
|
||||||
#ifdef WITHOEMCOMPATBS
|
#ifdef WITHOEMCOMPATBS
|
||||||
if (altkern == MS_OEMKERN) dosfn = MSDOS;
|
if (altkern == MS_OEMKERN) dosfn = MS_DOS;
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
if ( (!get_full_path(srcPath, rootPath, dosfn, srcFile)) ||
|
if ( (!get_full_path(srcPath, rootPath, dosfn, srcFile)) ||
|
||||||
|
|
474
utils/exeflat.c
474
utils/exeflat.c
|
@ -52,11 +52,13 @@ large portions copied from task.c
|
||||||
|
|
||||||
#define BUFSIZE 32768u
|
#define BUFSIZE 32768u
|
||||||
|
|
||||||
|
#define KERNEL_START 0x10 /* the kernel code really starts here at 60:10 */
|
||||||
|
|
||||||
typedef struct {
|
typedef struct {
|
||||||
UWORD off, seg;
|
UWORD off, seg;
|
||||||
} farptr;
|
} farptr;
|
||||||
|
|
||||||
int compReloc(const void *p1, const void *p2)
|
static int compReloc(const void *p1, const void *p2)
|
||||||
{
|
{
|
||||||
farptr *r1 = (farptr *) p1;
|
farptr *r1 = (farptr *) p1;
|
||||||
farptr *r2 = (farptr *) p2;
|
farptr *r2 = (farptr *) p2;
|
||||||
|
@ -71,7 +73,7 @@ int compReloc(const void *p1, const void *p2)
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
void usage(void)
|
static void usage(void)
|
||||||
{
|
{
|
||||||
printf("usage: exeflat (src.exe) (dest.sys) (relocation-factor)\n");
|
printf("usage: exeflat (src.exe) (dest.sys) (relocation-factor)\n");
|
||||||
printf
|
printf
|
||||||
|
@ -80,9 +82,11 @@ void usage(void)
|
||||||
exit(1);
|
exit(1);
|
||||||
}
|
}
|
||||||
|
|
||||||
int main(int argc, char **argv)
|
static exe_header header;
|
||||||
|
|
||||||
|
int exeflat(int UPX, const char *srcfile, const char *dstfile,
|
||||||
|
const char *start, short *silentSegments, short silentcount)
|
||||||
{
|
{
|
||||||
exe_header header;
|
|
||||||
int i, j;
|
int i, j;
|
||||||
size_t bufsize;
|
size_t bufsize;
|
||||||
farptr *reloc;
|
farptr *reloc;
|
||||||
|
@ -91,8 +95,246 @@ int main(int argc, char **argv)
|
||||||
UBYTE **buffers;
|
UBYTE **buffers;
|
||||||
UBYTE **curbuf;
|
UBYTE **curbuf;
|
||||||
FILE *src, *dest;
|
FILE *src, *dest;
|
||||||
short silentSegments[20], silentcount = 0, silentdone = 0;
|
short silentdone = 0;
|
||||||
|
int compress_sys_file;
|
||||||
|
|
||||||
|
if ((src = fopen(srcfile, "rb")) == NULL)
|
||||||
|
{
|
||||||
|
printf("Source file %s could not be opened\n", srcfile);
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
if (fread(&header, sizeof(header), 1, src) != 1)
|
||||||
|
{
|
||||||
|
printf("Error reading header from %s\n", srcfile);
|
||||||
|
fclose(src);
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
if (header.exSignature != MAGIC)
|
||||||
|
{
|
||||||
|
printf("Source file %s is not a valid .EXE\n", srcfile);
|
||||||
|
fclose(src);
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
if ((dest = fopen(dstfile, "wb+")) == NULL)
|
||||||
|
{
|
||||||
|
printf("Destination file %s could not be created\n", dstfile);
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
start_seg = (UWORD)strtol(start, NULL, 0);
|
||||||
|
if (header.exExtraBytes == 0)
|
||||||
|
header.exExtraBytes = 0x200;
|
||||||
|
printf("header len = %lu = 0x%lx\n", header.exHeaderSize * 16UL,
|
||||||
|
header.exHeaderSize * 16UL);
|
||||||
|
size =
|
||||||
|
((DWORD) (header.exPages - 1) << 9) + header.exExtraBytes -
|
||||||
|
header.exHeaderSize * 16UL;
|
||||||
|
printf("image size (less header) = %lu = 0x%lx\n", size, size);
|
||||||
|
printf("first relocation offset = %u = 0x%u\n", header.exOverlay,
|
||||||
|
header.exOverlay);
|
||||||
|
|
||||||
|
/* first read file into memory chunks */
|
||||||
|
fseek(src, header.exHeaderSize * 16UL, SEEK_SET);
|
||||||
|
buffers = malloc((size_t)((size + BUFSIZE - 1) / BUFSIZE) * sizeof(char *));
|
||||||
|
if (buffers == NULL)
|
||||||
|
{
|
||||||
|
printf("Allocation error\n");
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
bufsize = BUFSIZE;
|
||||||
|
for (to_xfer = size, curbuf = buffers; to_xfer > 0;
|
||||||
|
to_xfer -= bufsize, curbuf++)
|
||||||
|
{
|
||||||
|
if (to_xfer < BUFSIZE)
|
||||||
|
bufsize = (size_t)to_xfer;
|
||||||
|
*curbuf = malloc(bufsize);
|
||||||
|
if (*curbuf == NULL)
|
||||||
|
{
|
||||||
|
printf("Allocation error\n");
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
if (fread(*curbuf, sizeof(char), bufsize, src) != bufsize)
|
||||||
|
{
|
||||||
|
printf("Source file read error %ld %d\n", to_xfer, bufsize);
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (header.exRelocTable && header.exRelocItems)
|
||||||
|
{
|
||||||
|
fseek(src, header.exRelocTable, SEEK_SET);
|
||||||
|
reloc = malloc(header.exRelocItems * sizeof(farptr));
|
||||||
|
if (reloc == NULL)
|
||||||
|
{
|
||||||
|
printf("Allocation error\n");
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
if (fread(reloc, sizeof(farptr), header.exRelocItems, src) !=
|
||||||
|
header.exRelocItems)
|
||||||
|
{
|
||||||
|
printf("Source file read error\n");
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
fclose(src);
|
||||||
|
qsort(reloc, header.exRelocItems, sizeof(reloc[0]), compReloc);
|
||||||
|
for (i = 0; i < header.exRelocItems; i++)
|
||||||
|
{
|
||||||
|
ULONG spot = ((ULONG) reloc[i].seg << 4) + reloc[i].off;
|
||||||
|
UBYTE *spot0 = &buffers[(size_t)(spot / BUFSIZE)][(size_t)(spot % BUFSIZE)];
|
||||||
|
UBYTE *spot1 = &buffers[(size_t)((spot + 1) / BUFSIZE)][(size_t)((spot + 1) % BUFSIZE)];
|
||||||
|
UWORD segment = ((UWORD) * spot1 << 8) + *spot0;
|
||||||
|
|
||||||
|
for (j = 0; j < silentcount; j++)
|
||||||
|
if (segment == silentSegments[j])
|
||||||
|
{
|
||||||
|
silentdone++;
|
||||||
|
goto dontPrint;
|
||||||
|
}
|
||||||
|
|
||||||
|
printf("relocation at 0x%04x:0x%04x ->%04x\n", reloc[i].seg,
|
||||||
|
reloc[i].off, segment);
|
||||||
|
|
||||||
|
dontPrint:
|
||||||
|
|
||||||
|
segment += start_seg;
|
||||||
|
*spot0 = segment & 0xff;
|
||||||
|
*spot1 = segment >> 8;
|
||||||
|
}
|
||||||
|
|
||||||
|
compress_sys_file = size < 0x10000L;
|
||||||
|
if (UPX && !compress_sys_file) {
|
||||||
|
/* write header without relocations to file */
|
||||||
|
exe_header nheader = header;
|
||||||
|
nheader.exRelocItems = 0;
|
||||||
|
nheader.exHeaderSize = 2;
|
||||||
|
size += 32;
|
||||||
|
nheader.exPages = (UWORD)(size >> 9);
|
||||||
|
nheader.exExtraBytes = (UWORD)size & 511;
|
||||||
|
if (nheader.exExtraBytes)
|
||||||
|
nheader.exPages++;
|
||||||
|
if (fwrite(&nheader, sizeof(nheader), 1, dest) != 1) {
|
||||||
|
printf("Destination file write error\n");
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
fseek(dest, 32UL, SEEK_SET);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* write dest file from memory chunks */
|
||||||
|
bufsize = BUFSIZE;
|
||||||
|
for (to_xfer = size, curbuf = buffers; to_xfer > 0;
|
||||||
|
to_xfer -= bufsize, curbuf++)
|
||||||
|
{
|
||||||
|
if (to_xfer < BUFSIZE)
|
||||||
|
bufsize = (size_t)to_xfer;
|
||||||
|
if (fwrite(*curbuf, sizeof(char), bufsize, dest) != bufsize)
|
||||||
|
|
||||||
|
{
|
||||||
|
printf("Destination file write error\n");
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
free(*curbuf);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (UPX && compress_sys_file) {
|
||||||
|
/* overwrite first 8 bytes with SYS header */
|
||||||
|
UWORD dhdr[4];
|
||||||
|
fseek(dest, 0, SEEK_SET);
|
||||||
|
for (i = 0; i < 3; i++)
|
||||||
|
dhdr[i] = 0xffff;
|
||||||
|
/* strategy will jump to us, interrupt never called */
|
||||||
|
dhdr[3] = KERNEL_START;
|
||||||
|
fwrite(dhdr, sizeof(dhdr), 1, dest);
|
||||||
|
}
|
||||||
|
fclose(dest);
|
||||||
|
printf("\nProcessed %d relocations, %d not shown\n",
|
||||||
|
header.exRelocItems, silentdone);
|
||||||
|
return compress_sys_file;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void write_header(FILE *dest, size_t size)
|
||||||
|
{
|
||||||
|
/* UPX HEADER jump $+2+size */
|
||||||
|
static char JumpBehindCode[] = {
|
||||||
|
/* kernel config header - 32 bytes */
|
||||||
|
0xeb, 0x1b, /* jmp short realentry */
|
||||||
|
'C', 'O', 'N', 'F', 'I', 'G', 32 - 2 - 6 - 2 - 3, 0, /* WORD */
|
||||||
|
0, /* DLASortByDriveNo db 0 */
|
||||||
|
1, /* InitDiskShowDriveAssignment db 1 */
|
||||||
|
2, /* SkipConfigSeconds db 2 */
|
||||||
|
0, /* ForceLBA db 0 */
|
||||||
|
1, /* GlobalEnableLBAsupport db 1 */
|
||||||
|
0, /* BootHarddiskSeconds */
|
||||||
|
|
||||||
|
'n', 'u', 's', 'e', 'd', /* unused filler bytes */
|
||||||
|
8, 7, 6, 5, 4, 3, 2, 1,
|
||||||
|
/* real-entry: jump over the 'real' image do the trailer */
|
||||||
|
0xe9, 0, 0 /* 100: jmp 103 */
|
||||||
|
};
|
||||||
|
|
||||||
|
struct x {
|
||||||
|
char y[sizeof(JumpBehindCode) == 0x20 ? 1 : -1];
|
||||||
|
};
|
||||||
|
|
||||||
|
fseek(dest, 0, SEEK_SET);
|
||||||
|
/* this assumes <= 0xfe00 code in kernel */
|
||||||
|
*(short *)&JumpBehindCode[0x1e] += size;
|
||||||
|
/* the UPX created-header is 32 bytes long */
|
||||||
|
fwrite(JumpBehindCode, 1, 0x20, dest);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void write_trailer(FILE *dest, size_t size, int compress_sys_file)
|
||||||
|
{
|
||||||
|
/* UPX trailer */
|
||||||
|
/* hand assembled - so this remains ANSI C ;-) */
|
||||||
|
/* well almost: we still need packing and assume little endian ... */
|
||||||
|
/* move kernel down to place CONFIG-block, which added above,
|
||||||
|
at start_seg-2:0 (e.g. 0x5e:0) instead of
|
||||||
|
start_seg:0 (e.g. 0x60:0) and store there boot drive number
|
||||||
|
from BL; kernel.asm will then check presence of additional
|
||||||
|
CONFIG-block at this address. */
|
||||||
|
static char trailer[] = { /* shift down everything by sizeof JumpBehindCode */
|
||||||
|
0xB9, 0x00, 0x00, /* 0 mov cx,offset trailer */
|
||||||
|
0x0E, /* 3 push cs */
|
||||||
|
0x1F, /* 4 pop ds (=60) */
|
||||||
|
0x8C, 0xC8, /* 5 mov ax,cs */
|
||||||
|
0x48, /* 7 dec ax */
|
||||||
|
0x48, /* 8 dec ax */
|
||||||
|
0x8E, 0xC0, /* 9 mov es,ax */
|
||||||
|
0x93, /* 11 xchg ax,bx (to get al=bl) */
|
||||||
|
0x31, 0xFF, /* 12 xor di,di */
|
||||||
|
0xFC, /* 14 cld */
|
||||||
|
0xAA, /* 15 stosb (store drive number)*/
|
||||||
|
0x8B, 0xF7, /* 16 mov si,di */
|
||||||
|
0xF3, 0xA4, /* 18 rep movsb */
|
||||||
|
0x1E, /* 20 push ds */
|
||||||
|
0x58, /* 21 pop ax */
|
||||||
|
0x05, 0x00, 0x00, /* 22 add ax,... */
|
||||||
|
0x8E, 0xD0, /* 25 mov ss,ax */
|
||||||
|
0xBC, 0x00, 0x00, /* 27 mov sp,... */
|
||||||
|
0x31, 0xC0, /* 30 xor ax,ax */
|
||||||
|
0xFF, 0xE0 /* 32 jmp ax */
|
||||||
|
};
|
||||||
|
|
||||||
|
*(short *)&trailer[1] = (short)size + 0x20;
|
||||||
|
*(short *)&trailer[23] = header.exInitSS;
|
||||||
|
*(short *)&trailer[28] = header.exInitSP;
|
||||||
|
if (compress_sys_file)
|
||||||
|
/* replace by jmp word ptr [6]: ff 26 06 00
|
||||||
|
(the .SYS strategy handler which will unpack) */
|
||||||
|
*(long *)&trailer[30] = 0x000626ffL;
|
||||||
|
fwrite(trailer, 1, sizeof(trailer), dest);
|
||||||
|
fclose(dest);
|
||||||
|
}
|
||||||
|
|
||||||
|
int main(int argc, char **argv)
|
||||||
|
{
|
||||||
|
short silentSegments[20], silentcount = 0;
|
||||||
|
int compress_sys_file;
|
||||||
|
char *upx, *tmpexe, *buffer;
|
||||||
|
char cmdbuf[128];
|
||||||
int UPX = FALSE;
|
int UPX = FALSE;
|
||||||
|
int i;
|
||||||
|
FILE *dest;
|
||||||
|
long size;
|
||||||
|
|
||||||
/* if no arguments provided, show usage and exit */
|
/* if no arguments provided, show usage and exit */
|
||||||
if (argc < 4) usage();
|
if (argc < 4) usage();
|
||||||
|
@ -131,196 +373,66 @@ int main(int argc, char **argv)
|
||||||
/* arguments left :
|
/* arguments left :
|
||||||
infile outfile relocation offset */
|
infile outfile relocation offset */
|
||||||
|
|
||||||
if ((src = fopen(argv[1], "rb")) == NULL)
|
compress_sys_file = exeflat(UPX, argv[1], argv[2], argv[3],
|
||||||
{
|
silentSegments, silentcount);
|
||||||
printf("Source file %s could not be opened\n", argv[1]);
|
if (!UPX)
|
||||||
return 1;
|
exit(0);
|
||||||
}
|
|
||||||
if (fread(&header, sizeof(header), 1, src) != 1)
|
|
||||||
{
|
|
||||||
printf("Error reading header from %s\n", argv[1]);
|
|
||||||
fclose(src);
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
if (header.exSignature != MAGIC)
|
|
||||||
{
|
|
||||||
printf("Source file %s is not a valid .EXE\n", argv[1]);
|
|
||||||
fclose(src);
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
if ((dest = fopen(argv[2], "wb+")) == NULL)
|
|
||||||
{
|
|
||||||
printf("Destination file %s could not be created\n", argv[2]);
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
start_seg = (UWORD)strtol(argv[3], NULL, 0);
|
|
||||||
if (header.exExtraBytes == 0)
|
|
||||||
header.exExtraBytes = 0x200;
|
|
||||||
printf("header len = %lu = 0x%lx\n", header.exHeaderSize * 16UL,
|
|
||||||
header.exHeaderSize * 16UL);
|
|
||||||
size =
|
|
||||||
((DWORD) (header.exPages - 1) << 9) + header.exExtraBytes -
|
|
||||||
header.exHeaderSize * 16UL;
|
|
||||||
printf("image size (less header) = %lu = 0x%lx\n", size, size);
|
|
||||||
printf("first relocation offset = %u = 0x%u\n", header.exOverlay,
|
|
||||||
header.exOverlay);
|
|
||||||
|
|
||||||
/* first read file into memory chunks */
|
/* move kernel.sys tmp$$$$$.exe */
|
||||||
fseek(src, header.exHeaderSize * 16UL, SEEK_SET);
|
tmpexe = argv[2];
|
||||||
buffers = malloc((size_t)((size + BUFSIZE - 1) / BUFSIZE) * sizeof(char *));
|
if (!compress_sys_file)
|
||||||
if (buffers == NULL)
|
|
||||||
{
|
{
|
||||||
printf("Allocation error\n");
|
tmpexe = "tmp$$$$$.exe";
|
||||||
return 1;
|
rename(argv[2], tmpexe);
|
||||||
}
|
|
||||||
bufsize = BUFSIZE;
|
|
||||||
for (to_xfer = size, curbuf = buffers; to_xfer > 0;
|
|
||||||
to_xfer -= bufsize, curbuf++)
|
|
||||||
{
|
|
||||||
if (to_xfer < BUFSIZE)
|
|
||||||
bufsize = (size_t)to_xfer;
|
|
||||||
*curbuf = malloc(bufsize);
|
|
||||||
if (*curbuf == NULL)
|
|
||||||
{
|
|
||||||
printf("Allocation error\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
if (fread(*curbuf, sizeof(char), bufsize, src) != bufsize)
|
|
||||||
{
|
|
||||||
printf("Source file read error %ld %d\n", to_xfer, bufsize);
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
if (header.exRelocTable && header.exRelocItems)
|
|
||||||
{
|
|
||||||
fseek(src, header.exRelocTable, SEEK_SET);
|
|
||||||
reloc = malloc(header.exRelocItems * sizeof(farptr));
|
|
||||||
if (reloc == NULL)
|
|
||||||
{
|
|
||||||
printf("Allocation error\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
if (fread(reloc, sizeof(farptr), header.exRelocItems, src) !=
|
|
||||||
header.exRelocItems)
|
|
||||||
{
|
|
||||||
printf("Source file read error\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
fclose(src);
|
|
||||||
qsort(reloc, header.exRelocItems, sizeof(reloc[0]), compReloc);
|
|
||||||
for (i = 0; i < header.exRelocItems; i++)
|
|
||||||
{
|
|
||||||
ULONG spot = ((ULONG) reloc[i].seg << 4) + reloc[i].off;
|
|
||||||
UBYTE *spot0 = &buffers[(size_t)(spot / BUFSIZE)][(size_t)(spot % BUFSIZE)];
|
|
||||||
UBYTE *spot1 = &buffers[(size_t)((spot + 1) / BUFSIZE)][(size_t)((spot + 1) % BUFSIZE)];
|
|
||||||
UWORD segment = ((UWORD) * spot1 << 8) + *spot0;
|
|
||||||
|
|
||||||
for (j = 0; j < silentcount; j++)
|
|
||||||
if (segment == silentSegments[j])
|
|
||||||
{
|
|
||||||
silentdone++;
|
|
||||||
goto dontPrint;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
printf("relocation at 0x%04x:0x%04x ->%04x\n", reloc[i].seg,
|
upx = getenv("XUPX");
|
||||||
reloc[i].off, segment);
|
if (upx == NULL)
|
||||||
|
upx = "UPX";
|
||||||
|
|
||||||
dontPrint:
|
#if !defined(__TURBOC__)
|
||||||
|
/* upx kernel.exe -o kernel.sys */
|
||||||
|
_snprintf(cmdbuf, sizeof cmdbuf, "%s %s", upx, tmpexe);
|
||||||
|
#else
|
||||||
|
/* oh well, let's hope for no buffer overflow...*/
|
||||||
|
sprintf(cmdbuf, "%s %s", upx, tmpexe);
|
||||||
|
#endif
|
||||||
|
|
||||||
segment += start_seg;
|
if (system(cmdbuf))
|
||||||
*spot0 = segment & 0xff;
|
|
||||||
*spot1 = segment >> 8;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
if (UPX)
|
|
||||||
{
|
{
|
||||||
/* UPX HEADER jump $+2+size */
|
printf("Problems executing %s\n", cmdbuf);
|
||||||
static char JumpBehindCode[] = {
|
remove(tmpexe);
|
||||||
/* kernel config header - 32 bytes */
|
exit(1);
|
||||||
0xeb, 0x1b, /* jmp short realentry */
|
}
|
||||||
'C', 'O', 'N', 'F', 'I', 'G', 32 - 2 - 6 - 2 - 3, 0, /* WORD */
|
|
||||||
0, /* DLASortByDriveNo db 0 */
|
|
||||||
1, /* InitDiskShowDriveAssignment db 1 */
|
|
||||||
2, /* SkipConfigSeconds db 2 */
|
|
||||||
0, /* ForceLBA db 0 */
|
|
||||||
1, /* GlobalEnableLBAsupport db 1 */
|
|
||||||
0, /* BootHarddiskSeconds */
|
|
||||||
|
|
||||||
'n', 'u', 's', 'e', 'd', /* unused filler bytes */
|
if (!compress_sys_file)
|
||||||
8, 7, 6, 5, 4, 3, 2, 1,
|
{
|
||||||
/* real-entry: jump over the 'real' image do the trailer */
|
size = exeflat(FALSE, tmpexe, argv[2], argv[3],
|
||||||
0xe9, 0, 0 /* 100: jmp 103 */
|
silentSegments, silentcount);
|
||||||
};
|
remove(tmpexe);
|
||||||
|
}
|
||||||
|
/* argv[2] does now contain the final flattened file: just
|
||||||
|
header and trailer need to be added */
|
||||||
|
/* the compressed file has two chunks max */
|
||||||
|
|
||||||
struct x {
|
if ((dest = fopen(argv[2], "rb+")) == NULL)
|
||||||
char y[sizeof(JumpBehindCode) == 0x20 ? 1 : -1];
|
{
|
||||||
};
|
printf("Destination file %s could not be opened\n", argv[2]);
|
||||||
|
exit(1);
|
||||||
|
}
|
||||||
|
|
||||||
|
buffer = malloc(0xfe01);
|
||||||
|
|
||||||
|
fread(buffer, 0xfe01, 1, dest);
|
||||||
|
size = ftell(dest);
|
||||||
if (size >= 0xfe00u)
|
if (size >= 0xfe00u)
|
||||||
{
|
{
|
||||||
printf("kernel; size too large - must be <= 0xfe00\n");
|
printf("kernel; size too large - must be <= 0xfe00\n");
|
||||||
exit(1);
|
exit(1);
|
||||||
}
|
}
|
||||||
|
fseek(dest, 0, SEEK_SET);
|
||||||
/* this assumes <= 0xfe00 code in kernel */
|
write_header(dest, (size_t)size);
|
||||||
*(short *)&JumpBehindCode[0x1e] += (short)size;
|
fwrite(buffer, (size_t)size, 1, dest);
|
||||||
fwrite(JumpBehindCode, 1, 0x20, dest);
|
write_trailer(dest, (size_t)size, compress_sys_file);
|
||||||
}
|
|
||||||
|
|
||||||
/* write dest file from memory chunks */
|
|
||||||
bufsize = BUFSIZE;
|
|
||||||
for (to_xfer = size, curbuf = buffers; to_xfer > 0;
|
|
||||||
to_xfer -= bufsize, curbuf++)
|
|
||||||
{
|
|
||||||
if (to_xfer < BUFSIZE)
|
|
||||||
bufsize = (size_t)to_xfer;
|
|
||||||
if (fwrite(*curbuf, sizeof(char), bufsize, dest) != bufsize)
|
|
||||||
|
|
||||||
{
|
|
||||||
printf("Destination file write error\n");
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
if (UPX)
|
|
||||||
{
|
|
||||||
/* UPX trailer */
|
|
||||||
/* hand assembled - so this remains ANSI C ;-) */
|
|
||||||
/* move kernel down to place CONFIG-block, which added above,
|
|
||||||
at start_seg-2:0 (e.g. 0x5e:0) instead of
|
|
||||||
start_seg:0 (e.g. 0x60:0) and store there boot drive number
|
|
||||||
from BL; kernel.asm will then check presence of additional
|
|
||||||
CONFIG-block at this address. */
|
|
||||||
static char trailer[] = {
|
|
||||||
0x0E, /* 0 push cs */
|
|
||||||
0x1F, /* 1 pop ds ; =0x60 */
|
|
||||||
0x8C,0xDF, /* 2 mov di,ds */
|
|
||||||
0x4F, /* 4 dec di */
|
|
||||||
0x4F, /* 5 dec di */
|
|
||||||
0x8E,0xC7, /* 6 mov es,di */
|
|
||||||
0xFC, /* 8 cld */
|
|
||||||
0x33,0xFF, /* 9 xor di,di */
|
|
||||||
0x93, /* 11 xchg ax,bx ; mov al,bl */
|
|
||||||
0xAA, /* 12 stosb ; mov [es:0],al */
|
|
||||||
0x8B,0xF7, /* 13 mov si,di */
|
|
||||||
0xB9,0x00,0x00, /* 15 mov cx,offset trailer */
|
|
||||||
0xF3,0xA4, /* 18 rep movsb */
|
|
||||||
0x1E, /* 20 push ds */
|
|
||||||
0x58, /* 21 pop ax */
|
|
||||||
0x05,0x00,0x00, /* 22 add ax,... */
|
|
||||||
0x8E,0xD0, /* 25 mov ss,ax */
|
|
||||||
0xBC,0x00,0x00, /* 27 mov sp,... */
|
|
||||||
0x31,0xC0, /* 30 xor ax,ax */
|
|
||||||
0xFF,0xE0, /* 32 jmp ax ; jmp 0 */
|
|
||||||
};
|
|
||||||
*(short *)&trailer[16] = (short)size + 0x20;
|
|
||||||
*(short *)&trailer[23] = header.exInitSS;
|
|
||||||
*(short *)&trailer[28] = header.exInitSP;
|
|
||||||
fwrite(trailer, 1, sizeof trailer, dest);
|
|
||||||
}
|
|
||||||
fclose(dest);
|
|
||||||
printf("\nProcessed %d relocations, %d not shown\n",
|
|
||||||
header.exRelocItems, silentdone);
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
Loading…
Reference in New Issue