- (djm) Add Steve VanDevender's <stevev@darkwing.uoregon.edu> PAM

password change patch.
 - (djm) Bring licenses on my stuff in line with OpenBSD's

ChangeLog

@@ -1,4 +1,7 @@
 20000916
+ - (djm) Add Steve VanDevender's <stevev@darkwing.uoregon.edu> PAM 
+   password change patch.
+ - (djm) Bring licenses on my stuff in line with OpenBSD's
  - (djm) Cleanup auth-passwd.c and unify HP/UX authentication. Patch from
    Kevin Steves <stevesk@sweden.hp.com>
  - (djm) Shadow expiry check fix from Pavel Troller <patrol@omni.sinus.cz>

auth-pam.c

@@ -9,11 +9,6 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Markus Friedl.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
@@ -34,10 +29,10 @@
 #include "xmalloc.h"
 #include "servconf.h"
 
-RCSID("$Id: auth-pam.c,v 1.12 2000/08/29 22:57:50 djm Exp $");
+RCSID("$Id: auth-pam.c,v 1.13 2000/09/16 05:09:27 djm Exp $");
 
 #define NEW_AUTHTOK_MSG \
-	"Warning: You password has expired, please change it now"
+	"Warning: Your password has expired, please change it now"
 
 /* Callbacks */
 static int pamconv(int num_msg, const struct pam_message **msg,
@@ -50,17 +45,35 @@ static struct pam_conv conv = {
 	pamconv,
 	NULL
 };
-static struct pam_handle_t *pamh = NULL;
+static pam_handle_t *pamh = NULL;
 static const char *pampasswd = NULL;
 static char *pam_msg = NULL;
 
-/* PAM conversation function. This is really a kludge to get the password */
+/* states for pamconv() */
-/* into PAM and to pick up any messages generated by PAM into pamconv_msg */
+typedef enum { INITIAL_LOGIN, OTHER } pamstates;
+static pamstates pamstate = INITIAL_LOGIN;
+/* remember whether pam_acct_mgmt() returned PAM_NEWAUTHTOK_REQD */
+static int password_change_required = 0;
+
+/*
+ * PAM conversation function.
+ * There are two states this can run in.
+ *
+ * INITIAL_LOGIN mode simply feeds the password from the client into
+ * PAM in response to PAM_PROMPT_ECHO_OFF, and collects output
+ * messages with pam_msg_cat().  This is used during initial
+ * authentication to bypass the normal PAM password prompt.
+ *
+ * OTHER mode handles PAM_PROMPT_ECHO_OFF with read_passphrase(prompt, 1)
+ * and outputs messages to stderr. This mode is used if pam_chauthtok()
+ * is called to update expired passwords.
+ */
 static int pamconv(int num_msg, const struct pam_message **msg,
 	struct pam_response **resp, void *appdata_ptr)
 {
 	struct pam_response *reply;
 	int count;
+	char buf[1024];
 
 	/* PAM will free this later */
 	reply = malloc(num_msg * sizeof(*reply));
@@ -68,22 +81,36 @@ static int pamconv(int num_msg, const struct pam_message **msg,
 		return PAM_CONV_ERR; 
 
 	for (count = 0; count < num_msg; count++) {
-		switch (msg[count]->msg_style) {
+		switch ((*msg)[count].msg_style) {
+			case PAM_PROMPT_ECHO_ON:
+				fputs((*msg)[count].msg, stderr);
+				fgets(buf, sizeof(buf), stdin);
+				reply[count].resp = xstrdup(buf);
+				reply[count].resp_retcode = PAM_SUCCESS;
+				break;
 			case PAM_PROMPT_ECHO_OFF:
+				if (pamstate == INITIAL_LOGIN) {
 					if (pampasswd == NULL) {
 						free(reply);
 						return PAM_CONV_ERR;
 					}
-				reply[count].resp_retcode = PAM_SUCCESS;
 					reply[count].resp = xstrdup(pampasswd);
-				break;
+				} else
-			case PAM_TEXT_INFO:
+					reply[count].resp = xstrdup(read_passphrase((*msg)[count].msg, 1));
 				reply[count].resp_retcode = PAM_SUCCESS;
+				break;
+			case PAM_ERROR_MSG:
+			case PAM_TEXT_INFO:
+				if ((*msg)[count].msg != NULL) {
+					if (pamstate == INITIAL_LOGIN)
+						pam_msg_cat((*msg)[count].msg);
+					else {
+						fputs((*msg)[count].msg, stderr);
+						fputs("\n", stderr);
+					}
+				}
 				reply[count].resp = xstrdup("");
-
+				reply[count].resp_retcode = PAM_SUCCESS;
-				if (msg[count]->msg != NULL)
-					pam_msg_cat(msg[count]->msg);
-
 				break;
 			default:
 				free(reply);
@@ -103,22 +130,22 @@ void pam_cleanup_proc(void *context)
 
 	if (pamh != NULL)
 	{
-		pam_retval = pam_close_session((pam_handle_t *)pamh, 0);
+		pam_retval = pam_close_session(pamh, 0);
 		if (pam_retval != PAM_SUCCESS) {
 			log("Cannot close PAM session: %.200s", 
-				PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+				PAM_STRERROR(pamh, pam_retval));
 		}
 
-		pam_retval = pam_setcred((pam_handle_t *)pamh, PAM_DELETE_CRED);
+		pam_retval = pam_setcred(pamh, PAM_DELETE_CRED);
 		if (pam_retval != PAM_SUCCESS) {
 			debug("Cannot delete credentials: %.200s", 
-				PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+				PAM_STRERROR(pamh, pam_retval));
 		}
 
-		pam_retval = pam_end((pam_handle_t *)pamh, pam_retval);
+		pam_retval = pam_end(pamh, pam_retval);
 		if (pam_retval != PAM_SUCCESS) {
 			log("Cannot release PAM authentication: %.200s", 
-				PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+				PAM_STRERROR(pamh, pam_retval));
 		}
 	}
 }
@@ -139,14 +166,15 @@ int auth_pam_password(struct passwd *pw, const char *password)
 
 	pampasswd = password;
 	
-	pam_retval = pam_authenticate((pam_handle_t *)pamh, 0);
+	pamstate = INITIAL_LOGIN;
+	pam_retval = pam_authenticate(pamh, 0);
 	if (pam_retval == PAM_SUCCESS) {
 		debug("PAM Password authentication accepted for user \"%.100s\"", 
 			pw->pw_name);
 		return 1;
 	} else {
 		debug("PAM Password authentication for \"%.100s\" failed: %s", 
-			pw->pw_name, PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+			pw->pw_name, PAM_STRERROR(pamh, pam_retval));
 		return 0;
 	}
 }
@@ -157,33 +185,35 @@ int do_pam_account(char *username, char *remote_user)
 	int pam_retval;
 	
 	debug("PAM setting rhost to \"%.200s\"", get_canonical_hostname());
-	pam_retval = pam_set_item((pam_handle_t *)pamh, PAM_RHOST, 
+	pam_retval = pam_set_item(pamh, PAM_RHOST, 
 		get_canonical_hostname());
 	if (pam_retval != PAM_SUCCESS) {
 		fatal("PAM set rhost failed: %.200s", 
-			PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+			PAM_STRERROR(pamh, pam_retval));
 	}
 
 	if (remote_user != NULL) {
 		debug("PAM setting ruser to \"%.200s\"", remote_user);
-		pam_retval = pam_set_item((pam_handle_t *)pamh, PAM_RUSER, remote_user);
+		pam_retval = pam_set_item(pamh, PAM_RUSER, remote_user);
 		if (pam_retval != PAM_SUCCESS) {
 			fatal("PAM set ruser failed: %.200s", 
-				PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+				PAM_STRERROR(pamh, pam_retval));
 		}
 	}
 
-	pam_retval = pam_acct_mgmt((pam_handle_t *)pamh, 0);
+	pam_retval = pam_acct_mgmt(pamh, 0);
 	switch (pam_retval) {
 		case PAM_SUCCESS:
 			/* This is what we want */
 			break;
 		case PAM_NEW_AUTHTOK_REQD:
 			pam_msg_cat(NEW_AUTHTOK_MSG);
+			/* flag that password change is necessary */
+			password_change_required = 1;
 			break;
 		default:
 			log("PAM rejected by account configuration: %.200s", 
-				PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+				PAM_STRERROR(pamh, pam_retval));
 			return(0);
 	}
 	
@@ -197,17 +227,17 @@ void do_pam_session(char *username, const char *ttyname)
 
 	if (ttyname != NULL) {
 		debug("PAM setting tty to \"%.200s\"", ttyname);
-		pam_retval = pam_set_item((pam_handle_t *)pamh, PAM_TTY, ttyname);
+		pam_retval = pam_set_item(pamh, PAM_TTY, ttyname);
 		if (pam_retval != PAM_SUCCESS) {
 			fatal("PAM set tty failed: %.200s", 
-				PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+				PAM_STRERROR(pamh, pam_retval));
 		}
 	}
 
-	pam_retval = pam_open_session((pam_handle_t *)pamh, 0);
+	pam_retval = pam_open_session(pamh, 0);
 	if (pam_retval != PAM_SUCCESS) {
 		fatal("PAM session setup failed: %.200s", 
-			PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+			PAM_STRERROR(pamh, pam_retval));
 	}
 }
 
@@ -217,10 +247,28 @@ void do_pam_setcred()
 	int pam_retval;
  
 	debug("PAM establishing creds");
-	pam_retval = pam_setcred((pam_handle_t *)pamh, PAM_ESTABLISH_CRED);
+	pam_retval = pam_setcred(pamh, PAM_ESTABLISH_CRED);
 	if (pam_retval != PAM_SUCCESS) {
 		fatal("PAM setcred failed: %.200s", 
-			PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+			PAM_STRERROR(pamh, pam_retval));
+	}
+}
+
+/* 
+ * Have user change authentication token if pam_acct_mgmt() indicated
+ * it was expired.  This needs to be called after an interactive
+ * session is established and the user's pty is connected to
+ * stdin/stout/stderr.
+ */
+void do_pam_chauthtok()
+{
+	int pam_retval;
+
+	if (password_change_required) {
+		pamstate = OTHER;
+		do {
+			pam_retval = pam_chauthtok(pamh, PAM_CHANGE_EXPIRED_AUTHTOK);
+		} while (pam_retval != PAM_SUCCESS);
 	}
 }
 
@@ -238,12 +286,11 @@ void start_pam(struct passwd *pw)
 
 	debug("Starting up PAM with username \"%.200s\"", pw->pw_name);
 
-	pam_retval = pam_start(SSHD_PAM_SERVICE, pw->pw_name, &conv, 
+	pam_retval = pam_start(SSHD_PAM_SERVICE, pw->pw_name, &conv, &pamh);
-		(pam_handle_t**)&pamh);
 
 	if (pam_retval != PAM_SUCCESS) {
 		fatal("PAM initialisation failed: %.200s", 
-			PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+			PAM_STRERROR(pamh, pam_retval));
 	}
 
 #ifdef PAM_TTY_KLUDGE
@@ -254,10 +301,10 @@ void start_pam(struct passwd *pw)
 	 * not even need one (for tty-less connections)
 	 * Kludge: Set a fake PAM_TTY 
 	 */
-	pam_retval = pam_set_item((pam_handle_t *)pamh, PAM_TTY, "ssh");
+	pam_retval = pam_set_item(pamh, PAM_TTY, "ssh");
 	if (pam_retval != PAM_SUCCESS) {
 		fatal("PAM set tty failed: %.200s", 
-			PAM_STRERROR((pam_handle_t *)pamh, pam_retval));
+			PAM_STRERROR(pamh, pam_retval));
 	}
 #endif /* PAM_TTY_KLUDGE */
 
@@ -268,7 +315,7 @@ void start_pam(struct passwd *pw)
 char **fetch_pam_environment(void)
 {
 #ifdef HAVE_PAM_GETENVLIST
-	return(pam_getenvlist((pam_handle_t *)pamh));
+	return(pam_getenvlist(pamh));
 #else /* HAVE_PAM_GETENVLIST */
 	return(NULL);
 #endif /* HAVE_PAM_GETENVLIST */

auth-pam.h

@@ -11,5 +11,6 @@ int do_pam_account(char *username, char *remote_user);
 void do_pam_session(char *username, const char *ttyname);
 void do_pam_setcred();
 void print_pam_messages(void);
+void do_pam_chauthtok();
 
 #endif /* USE_PAM */

bsd-arc4random.c

@@ -9,11 +9,6 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Markus Friedl.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

bsd-arc4random.h

@@ -9,11 +9,6 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Markus Friedl.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

bsd-misc.c

@@ -9,11 +9,6 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Markus Friedl.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

bsd-misc.h

@@ -9,11 +9,6 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Markus Friedl.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

entropy.c

@@ -9,11 +9,6 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Markus Friedl.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
@@ -40,7 +35,7 @@
 # include <floatingpoint.h>
 #endif /* HAVE_FLOATINGPOINT_H */
 
-RCSID("$Id: entropy.c,v 1.18 2000/07/15 04:59:15 djm Exp $");
+RCSID("$Id: entropy.c,v 1.19 2000/09/16 05:09:28 djm Exp $");
 
 #ifndef offsetof
 # define offsetof(type, member) ((size_t) &((type *)0)->member)

entropy.h

@@ -9,11 +9,6 @@
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *      This product includes software developed by Markus Friedl.
- * 4. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

session.c

@@ -729,6 +729,8 @@ do_login(Session *s)
 
 #ifdef USE_PAM
 	print_pam_messages();
+	/* If password change is needed, do it now. */
+	do_pam_chauthtok();
 #endif /* USE_PAM */
 #ifdef WITH_AIXAUTHENTICATE
 	if (aixloginmsg && *aixloginmsg)