[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
[auth.c auth.h auth1.c auth2.c]
make the "Too many authentication failures" message include the
user, source address, port and protocol in a format similar to the
authentication success / failure messages; bz#2199, ok dtucker
[auth.h auth.c key.c monitor.c auth-rsa.c auth2.c auth1.c key.h]
Standardise logging of supplemental information during userauth. Keys
and ruser is now logged in the auth success/failure message alongside
the local username, remote host/port and protocol in use. Certificates
contents and CA are logged too.
Pushing all logging onto a single line simplifies log analysis as it is
no longer necessary to relate information scattered across multiple log
entries. "I like it" markus@
[auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c]
[monitor.c monitor.h]
Fixes logging of partial authentication when privsep is enabled
Previously, we recorded "Failed xxx" since we reset authenticated before
calling auth_log() in auth2.c. This adds an explcit "Partial" state.
Add a "submethod" to auth_log() to report which submethod is used
for keyboard-interactive.
Fix multiple authentication when one of the methods is
keyboard-interactive.
ok markus@
[auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c]
[sshd_config.5]
Support multiple required authentication via an AuthenticationMethods
option. This option lists one or more comma-separated lists of
authentication method names. Successful completion of all the methods in
any list is required for authentication to complete;
feedback and ok markus@
- djm@cvs.openbsd.org 2011/03/10 02:52:57
[auth2-gss.c auth2.c]
allow GSSAPI authentication to detect when a server-side failure causes
authentication failure and don't count such failures against MaxAuthTries;
bz#1244 from simon AT sxw.org.uk; ok markus@ before lock
[auth-options.c auth1.c auth2.c bufaux.c buffer.h kex.c key.c packet.c]
[packet.h ssh-dss.c ssh-rsa.c]
Add buffer_get_cstring() and related functions that verify that the
string extracted from the buffer contains no embedded \0 characters*
This prevents random (possibly malicious) crap from being appended to
strings where it would not be noticed if the string is used with
a string(3) function.
Use the new API in a few sensitive places.
* actually, we allow a single one at the end of the string for now because
we don't know how many deployed implementations get this wrong, but don't
count on this to remain indefinitely.
[monitor_wrap.c monitor_mm.c ssh-keygen.c auth2.c gss-genr.c sftp-client.c]
alphabetize includes; reduces diff vs portable and style(9).
ok stevesk djm
(Id sync only; these were already in order in -portable)
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
[auth1.c auth2.c]
Make protocol 1 MaxAuthTries logic match protocol 2's.
Do not treat the first protocol 2 authentication attempt as
a failure IFF it is for method "none".
Makes MaxAuthTries' user-visible behaviour identical for
protocol 1 vs 2.
ok dtucker@
[auth2-none.c auth2.c]
Make protocol 2 MaxAuthTries behaviour a little more sensible:
Check whether client has exceeded MaxAuthTries before running
an authentication method and skip it if they have, previously it
would always allow one try (for "none" auth).
Preincrement failure count before post-auth test - previously this
checked and postincremented, also to allow one "none" try.
Together, these two changes always count the "none" auth method
which could be skipped by a malicious client (e.g. an SSH worm)
to get an extra attempt at a real auth method. They also make
MaxAuthTries=0 a useful way to block users entirely (esp. in a
sshd_config Match block).
Also, move sending of any preauth banner from "none" auth method
to the first call to input_userauth_request(), so worms that skip
the "none" method get to see it too.
[auth2.c sshd_config.5 servconf.c]
Remove ChallengeResponseAuthentication support inside a Match
block as its interaction with KbdInteractive makes it difficult to
support. Also, relocate the CR/kbdint option special-case code into
servconf. "please commit" djm@, ok markus@ for the relocation.
monitor_wrap.c monitor_wrap.h session.c sshd.c]: Prepend all of the audit
defines and enums with SSH_ to prevent namespace collisions on some
platforms (eg AIX).
monitor.h monitor_wrap.c monitor_wrap.h session.c sshd.c] Bug #125:
(first stage) Add audit instrumentation to sshd, currently disabled by
default. with suggestions from and djm@
subsequently denied by the PAM auth stack, send the PAM message to the
user via packet_disconnect (Protocol 1) or userauth_banner (Protocol 2).
ok djm@
Bug #892: Send messages from failing PAM account modules to the client via
SSH2_MSG_USERAUTH_BANNER messages. Note that this will not happen with
SSH2 kbdint authentication, which need to be dealt with separately. ok djm@
monitor_wrap.h] Bug #808: Ensure force_pwchange is correctly initialized
even if keyboard-interactive is not used by the client. Prevents segfaults
in some cases where the user's password is expired (note this is not
considered a security exposure). ok djm@
[auth1.c auth2.c auth2-pubkey.c auth.h auth-krb5.c auth-passwd.c]
[auth-rhosts.c auth-rh-rsa.c auth-rsa.c monitor.c serverloop.c]
[session.c]
standardise arguments to auth methods - they should all take authctxt.
check authctxt->valid rather then pw != NULL; ok markus@
[auth-passwd.c auth.c auth.h auth1.c auth2-none.c auth2-passwd.c]
[auth2.c monitor.c]
fix passwd auth for 'username leaks via timing'; with djm@, original
patches from solar
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
[auth2.c monitor.c sshconnect2.c auth2-krb5.c]
implement kerberos over ssh2 ("kerberos-2@ssh.com"); tested with jakob@
server interops with commercial client; ok jakob@ djm@
[auth1.c auth2.c]
auth_root_allowed() is handled by the monitor in the privsep case,
so skip this for use_privsep, ok stevesk@, fixes bugzilla #387/325
[auth.h auth2.c auth2-hostbased.c auth2-kbdint.c auth2-none.c
auth2-passwd.c auth2-pubkey.c Makefile.in]
split auth2.c into one file per method; ok provos@/deraadt@
NOTE: Merged back noticable cygwin and pam stuff. May need review to
ensure I did not miss anything.
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
[auth2.c dispatch.c dispatch.h kex.c]
a single dispatch_protocol_error() that sends a message of type 'UNIMPLEMENTED'
dispatch_range(): set handler for a ranges message types
use dispatch_protocol_ignore() for authentication requests after
successful authentication (the drafts requirement).
serverloop/clientloop now send a 'UNIMPLEMENTED' message instead of exiting.
[auth2.c auth2-chall.c channels.c channels.h clientloop.c dispatch.c]
[dispatch.h kex.c kex.h packet.c packet.h serverloop.c ssh.c]
[sshconnect2.c]
Conformance fix: we should send failing packet sequence number when
responding with a SSH_MSG_UNIMPLEMENTED message. Spotted by
yakk@yakk.dot.net; ok markus@
do_authenticated. Call loginfailed for protocol 2 failures > MAX like
we do for protocol 1. Reports from Ralf Wenk <wera0003@fh-karlsruhe.de>,
K.Wolkersdorfer@fz-juelich.de and others
[auth2.c auth.c auth.h auth-rh-rsa.c]
*known_hosts2 is obsolete for hostbased authentication and
only used for backward compat. merge ssh1/2 hostkey check
and move it to auth.c
[auth2.c auth-rsa.c pathnames.h ssh.1 sshd.8 sshd_config
ssh-keygen.1]
merge authorized_keys2 into authorized_keys.
authorized_keys2 is used for backward compat.
(just append authorized_keys2 to authorized_keys).
pain will be over.]
- markus@cvs.openbsd.org 2001/05/31 10:30:17
[auth-options.c auth2.c channels.c channels.h clientloop.c nchan.c
packet.c serverloop.c session.c ssh.c]
undo the .c file split, just merge the header and keep the cvs
history
djm@openbsd.org
Damien Miller
Darren Tucker
Ben Lindstrom
Tim Rice
Kevin Steves