<tibbs@math.uh.edu>
- (djm) OpenBSD CVS updates:
- todd@cvs.openbsd.org
[sshconnect2.c]
teach protocol v2 to count login failures properly and also enable an
explanation of why the password prompt comes up again like v1; this is NOT
crypto
- markus@cvs.openbsd.org
[readconf.c readconf.h servconf.c servconf.h session.c ssh.1 ssh.c sshd.8]
xauth_location support; pr 1234
[readconf.c sshconnect2.c]
typo, unused
[session.c]
allow use_login only for login sessions, otherwise remote commands are
execed with uid==0
[sshd.8]
document UseLogin better
[version.h]
OpenSSH 2.1.1
[auth-rsa.c]
fix match_hostname() logic for auth-rsa: deny access if we have a
negative match or no match at all
[channels.c hostfile.c match.c]
don't panic if mkdtemp fails for authfwd; jkb@yahoo-inc.com via
kris@FreeBSD.org
- markus@cvs.openbsd.org
[session.c]
make x11-fwd work w/ localhost (xauth add host/unix:11)
[cipher.c compat.c readconf.c servconf.c]
check strtok() != NULL; ok niels@
[key.c]
fix key_read() for uuencoded keys w/o '='
[serverloop.c]
group ssh1 vs. ssh2 in serverloop
[kex.c kex.h myproposal.h sshconnect2.c sshd.c]
split kexinit/kexdh, factor out common code
[readconf.c ssh.1 ssh.c]
forwardagent defaults to no, add ssh -A
- theo@cvs.openbsd.org
[session.c]
just some line shortening
[ssh.h atomicio.c]
- int atomicio -> ssize_t (for alpha). ok deraadt@
[auth-rsa.c]
- delay MD5 computation until client sends response, free() early, cleanup.
[cipher.c]
- void* -> unsigned char*, ok niels@
[hostfile.c]
- remove unused variable 'len'. fix comments.
- remove unused variable
[log-client.c log-server.c]
- rename a cpp symbol, to avoid param.h collision
[packet.c]
- missing xfree()
- getsockname() requires initialized tolen; andy@guildsoftware.com
- use getpeername() in packet_connection_is_on_socket(), fixes sshd -i;
from Holger.Trapp@Informatik.TU-Chemnitz.DE
[pty.c pty.h]
- register cleanup for pty earlier. move code for pty-owner handling to
pty.c ok provos@, dugsong@
[readconf.c]
- turn off x11-fwd for the client, too.
[rsa.c]
- PKCS#1 padding
[scp.c]
- allow '.' in usernames; from jedgar@fxp.org
[servconf.c]
- typo: ignore_user_known_hosts int->flag; naddy@mips.rhein-neckar.de
- sync with sshd_config
[ssh-keygen.c]
- enable ssh-keygen -l -f ~/.ssh/known_hosts, ok deraadt@
[ssh.1]
- Change invalid 'CHAT' loglevel to 'VERBOSE'
[ssh.c]
- suppress AAAA query host when '-4' is used; from shin@nd.net.fujitsu.co.jp
- turn off x11-fwd for the client, too.
[sshconnect.c]
- missing xfree()
- retry rresvport_af(), too. from sumikawa@ebina.hitachi.co.jp.
- read error vs. "Connection closed by remote host"
[sshd.8]
- ie. -> i.e.,
- do not link to a commercial page..
- sync with sshd_config
[sshd.c]
- no need for poll.h; from bright@wintelcom.net
- log with level log() not fatal() if peer behaves badly.
- don't panic if client behaves strange. ok deraadt@
- make no-port-forwarding for RSA keys deny both -L and -R style fwding
- delay close() of pty until the pty has been chowned back to root
- oops, fix comment, too.
- missing xfree()
- move XAUTHORITY to subdir. ok dugsong@. fixes debian bug #57907, too.
(http://cgi.debian.org/cgi-bin/bugreport.cgi?archive=no&bug=57907)
- register cleanup for pty earlier. move code for pty-owner handling to
pty.c ok provos@, dugsong@
- create x11 cookie file
- fix pr 1113, fclose() -> pclose(), todo: remote popen()
- version 1.2.3
- Cleaned up
- [sshd.c sshd.8 sshconnect.c ssh.h ssh.c servconf.h servconf.c scp.1]
[scp.c packet.h packet.c login.c log.c canohost.c channels.c]
[hostfile.c sshd_config]
ipv6 support: mostly gethostbyname->getaddrinfo/getnameinfo, new
features: sshd allows multiple ListenAddress and Port options. note
that libwrap is not IPv6-ready. (based on patches from
fujiwara@rcac.tdi.co.jp)
- [ssh.c canohost.c]
more hints (hints.ai_socktype=SOCK_STREAM) for getaddrinfo,
from itojun@
- [channels.c]
listen on _all_ interfaces for X11-Fwd (hints.ai_flags = AI_PASSIVE)
- [packet.h]
allow auth-kerberos for IPv4 only
- [scp.1 sshd.8 servconf.h scp.c]
document -4, -6, and 'ssh -L 2022/::1/22'
- [ssh.c]
'ssh @host' is illegal (null user name), from
karsten@gedankenpolizei.de
- [sshconnect.c]
better error message
- [sshd.c]
allow auth-kerberos for IPv4 only
- Big IPv6 merge:
- Cleanup overrun in sockaddr copying on RHL 6.1
- Replacements for getaddrinfo, getnameinfo, etc based on versions
from patch from KIKUCHI Takahiro <kick@kyoto.wide.ad.jp>
- Replacement for missing structures on systems that lack IPv6
- record_login needed to know about AF_INET6 addresses
- Borrowed more code from OpenBSD: rresvport_af and requisites
- Merged OpenBSD CVS changes:
- [channels.c]
report from mrwizard@psu.edu via djm@ibs.com.au
- [channels.c]
set SO_REUSEADDR and SO_LINGER for forwarded ports.
chip@valinux.com via damien@ibs.com.au
- [nchan.c]
it's not an error() if shutdown_write failes in nchan.
- [readconf.c]
remove dead #ifdef-0-code
- [readconf.c servconf.c]
strcasecmp instead of tolower
- [scp.c]
progress meter overflow fix from damien@ibs.com.au
- [ssh-add.1 ssh-add.c]
SSH_ASKPASS support
- [ssh.1 ssh.c]
postpone fork_after_authentication until command execution,
request/patch from jahakala@cc.jyu.fi via damien@ibs.com.au
plus: use daemon() for backgrounding
- OpenBSD CVS updates
- [channels.c cipher.c compat.c log-client.c scp.c serverloop.c]
[ssh.h sshd.8 sshd.c]
syslog changes:
* Unified Logmessage for all auth-types, for success and for failed
* Standard connections get only ONE line in the LOG when level==LOG:
Auth-attempts are logged only, if authentication is:
a) successfull or
b) with passwd or
c) we had more than AUTH_FAIL_LOG failues
* many log() became verbose()
* old behaviour with level=VERBOSE
- [readconf.c readconf.h ssh.1 ssh.h sshconnect.c sshd.c]
tranfer s/key challenge/response data in SSH_SMSG_AUTH_TIS_CHALLENGE
messages. allows use of s/key in windows (ttssh, securecrt) and
ssh-1.2.27 clients without 'ssh -v', ok: niels@
- [sshd.8]
-V, for fallback to openssh in SSH2 compatibility mode
- [sshd.c]
fix sigchld race; cjc5@po.cwru.edu
- [channels.c]
make this compile, bad markus
- [log.c readconf.c servconf.c ssh.h]
bugfix: loglevels are per host in clientconfig,
factor out common log-level parsing code.
- [servconf.c]
remove unused index (-Wall)
- [ssh-agent.c]
only one 'extern char *__progname'
- [sshd.8]
document SIGHUP, -Q to synopsis
- [sshconnect.c serverloop.c sshd.c packet.c packet.h]
[channels.c clientloop.c]
SSH_CMSG_MAX_PACKET_SIZE, some clients use this, some need this, niels@
[hope this time my ISP stays alive during commit]
- [auth-rh-rsa.c auth-rhosts.c auth-rsa.c channels.c clientloop.c]
[ssh.c ssh.h sshconnect.c sshd.c]
make all access to options via 'extern Options options'
and 'extern ServerOptions options' respectively;
options are no longer passed as arguments:
* make options handling more consistent
* remove #include "readconf.h" from ssh.h
* readconf.h is only included if necessary
- [mpaux.c] clear temp buffer
- [servconf.c] print _all_ bad options found in configfile
- [sshd.c] session_key_int may be zero
- [auth-rh-rsa.c servconf.c servconf.h ssh.h sshd.8 sshd.c sshd_config]
IgnoreUserKnownHosts(default=no), used for RhostRSAAuth, ok
deraadt,millert
- Brought default sshd_config more in line with OpenBSDs
Damien Miller